When adding new pictures in an album the pictures do not show in the live site

I save the site and then publish changes but the new images do not show - any ideas???
Thanks

Thanks Old Toad - have tried that already.
In the Site Publishing Settings the ftp site, username and password are all correct - but the Directory/Path field is blank - I can't remeber if there was ever any content in it before, and as a world class no hoper when it comes to technology I don't know if this could be affecting the upload?

Similar Messages

I cannot unlock my phone. When I hit the number the key is highlighted but the "dot" does not show in the passcode box. Have shut it off and restarted nothing. Held on/off and "square" key to reset but still nothing. Any ideas on how to resolve this issue

I cannot unlock my phone. When I hit the number the key is highlighted but the "dot" does not show in the passcode box. Have shut it off and restarted nothing. Held on/off and "square" key to reset but still nothing. Any ideas on how to resolve this issue

Connect to iTunes and try to reset it from there.

TS3716 installed the new itunes and now my ipod nano does not show in the device menu

installed the new itunes and now my ipod nano does not show in the device menu

There's a couple of ways to get through to the authorisation controls in the 11.0.x versions.
The control is still in the Store menu, but first (if you're using iTunes versions 11.0.x) you might need to bring up the menu bar to see the Store menu.
If you're using 11.0.x, click on the wee boxy icon up in the top-left corner of your iTunes to see the "Show Menu Bar" control, as per the following screenshot:
Then you'll find the control in the Store menu:
Alternatively, if you don't want to bring up the menu bar, it's still possible to get into the authorise controls via nested menus accessible from the wee boxy icon. Here's a screenshot of where to find them:

Prices for the characteristic is not showing in the webshop

hi all,
we are facing a strange issue.
When we are trying to select configuration for the configurable product the prices are not showing in
the webshop against each configaration option but when we press the accept button after selecting the configuration the prices are adding automatically to the total.
our actual requirement is we have to show the prices against each configurable part of the configurable product in the webshop.
Whether we have to implement any special IPC user exit for this ?
there is already one standard implementation com.sap.spc.document.impl.userexit.csticValueSurcharge.StandardImplementation
under the CVS type userexit with the std delivery.
Note:we haven't done any custome development in this page of the webshop.
Please help it is urgently needed
Thanks and Regards
shanto allor
Edited by: shanto aloor on Mar 13, 2009 3:49 PM
Edited by: shanto aloor on Mar 16, 2009 1:47 PM

Hi Shanto,
The business requirement you have can be managed by the field catalog.
I think you will have to maintain the value of all possible combinations while you are selecting the characterstics.
You will have to add a field to the field catalog at item level and subsequently included this field in a condition table, access sequence and condition type.
When attributes of field catalog are being passed to IPC, you need to populate this new field by writing a code in BADI CRM_COND_COM_BADI.
Then in the WEB UI the field can be accessed using java code , i think this shud help you.
Wish u gud luck for this assignment.

TS2972 why is the import button not showing at the button right hand corner of iTunes?

why is the import button not showing at the bottom right hand corner of my ITunes page. I am trying to transfer files from my home share library onto a new computers library.

See if it isn't hidden under the View menu. iTunes- Turning on iTunes menus in Windows 8 and 7.

The approver does not show in the approval preview after saving sh. cart

Hi ,
I would appreciate if anyone can reply me for fixing the problem.
Problem: The approver does not show in the approval preview after the shopping cart is saved, however before saving the shopping cart it shows the approver in the approval preview. We are using two workflows: WS10000060 Auto approval and WS10000276- 1 level spending limit approval.
Details of the problem:
The following steps specify the problem in detail , it is applicable for both the workflows WS10000060 Auto approval and WS10000276- 1 level spending limit approval.
1.     Shopping created
2.     The approval preview shows the approver ( please see #1 in the attached document) before saving the shopping cart.
3.     Shopping cart is saved.
4.     After saving , Check status transaction shows the shopping cart in status awaiting approval
5.     The section approval shows No workflow started , application error occurred
6.     T.Code SWI1 shows the workitem created for the shopping cart but in error.
7.     The work item container does not show any agents
I would appreciate it anyone can reply as to how to fix it ASAP.
Best Regards
Pawan

Hi Disha,
I have synchronised through SWU_OBUF several times since yesterday , but still at the same place.
In the workflow customising - The only red entry which I have is for check entries from HR control tables under Mainiatin definition env. and Mainiatin guded procedure for gateway under guided procedure (new in SRM 5.0) .The verification workflow works fine . Also I think these entries will not impact the workflow functionalhese were red even in my earlier system .
SLG1 shows all green entries and there are no entries in RZ20.
I have specified task TS10008126 as general task as I want anyone who is identified by SLAapprover should be able to process the workitem and as per documentation I can specify this task as standard task.
What should I do.. , anything am I missing .
Thanks and Best Regards
Pawan

Payment from the customer is not showing in the lockbox transaction.

Hi all,
When i execute transaction code FLB1, I could not able to find lockbox and customer did the payment but it was not reflected in sap.
Payment from the customer is not showing in the lockbox transaction.
Please suggest and gide me with solution what could be the reason i am not awear of lockbox process.
Regards,
JC
Edited by: jcnaidu on Sep 17, 2010 6:41 AM

The messages are getting to the recipient...
I am on a Comcast IMAP server if this has anything to do with it and the server settings are following the correct server port numbers, SSL settings, etc... I save Sent messages on the IMAP server for 90 days.... None of these "disappearing" messages were on the server for more than a couple of days.. Typically, these messages will get 'hung' in the Outgoing Mailbox for @30 seconds before sending... like they are being scanned for viruses or Mail can't connect to the server all of a sudden...
I anybody else here is on a Comcast IMAP server, and having this problem of disappearing Sent messages... This would tell us that it might be a Mail Provider issue with their outgoing server...
--prd54usa

TS1538 The device do not show at the itune after update at itune

How to solve the device do not show at the itune after the update thru itune.
Now the ipad mini keep show the screen on "USB syr to itune"

Try and turn off iPad and proceed to step 3 of Recovery Mode.
Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times.

I used my ipad to transfer music to my wife's pc, now I have reconnected to my mac and itunes is not recognsing it - the ipad is not showing in the sidebar

I used my ipad to transfer music to my wife's pc, now I have reconnected to my mac and itunes is not recognsing it - the ipad is not showing in the sidebar and syncing not happening. I have tried resetting ipad and restarting etc but still no joy. Anyone had a similar experience?

Take it to the Apple Store for evaluation.
Try this.
Restart the iPad by holding down on the Sleep button until the red slider appears and then slide to shut Off. To power up hold the Sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the Sleep and Home buttons at the same time (for about 10-15 seconds) until the Apple logo appears (ignore the red slider), then let go of the buttons.
 Cheers, Tom

Make the emails do not show in the ipad or iPhone after i read them in my macbook air

make the emails do not show in the ipad or iPhone after i read them in my macbook air

Assuming you're using Apple's Mail on your Mac, go to your Mac's mail Preferences (from Mail on the menu bar).
Click Accounts on top, then click your email account on the left.
Then click Advanced on the top.
Check "remove copy from server after retrieving a message" and set the line below it to "immediately".
That will do it.

I changed my browser fill and the update does not show in the preview mode

I changed my browser fill and the update does not show in the preview mode. I saved and restarted muse but the problem is still there. Any thing else I can do? Could it be something that changed in the file?

Hello,
What did you put in the "browser fill" area, an image or a color? WIth gradient or with solid color? Also, does it show fine if you "Preview in Browser"?
Screenshots showing the Browser fill section (like this: http://screencast.com/t/RHqdVPP4) and the display in Preview mode would also be helpful.
Cheers
Parikshit

Data is in the repository, but not showing on the EPM workspace

Hi All,
Recently we have migrated from Hyperion8.5 to Hyperion11.1.1. Migration went on well no errors, after migration I see some folders missing and when I queried on the repositories all the folder data and reports are there in the repository but not showing up in the EPM workspace. It is weird. Did any one encountered this type of error. Is there any work around to this.
Any help will be greatly appreciated
Thanks

Check BI+ security in shared services. Set someone to BI+ Administrator and have them look in Workspace for the reports. In Workspace, check the Permissions of each folder.

I am trying to play music and videos but the volume will not show on the screen unless i have head phones in also the buttons on the side will not change my ringtone volume

i am trying to play music and videos but will not see the volume control unless i have head phones in also phone will not move off silent mode and wont turn up with the volume buttons

its not showing the headphone sign its showing ringer when i press the button but no volume i have tryed to restore it but didnot work

I brought an album from the iTunes Store, edited it, and put it onto my iPhone, but the only thing is, is that the featuring artists on the song are not showing, only the album artist, ive tried wipping my phone but no changes still, help me please

Basically I brought a album of the iTunes Store, Depzman - 2 Real, specifically, edited the album features, such as, artists and put the featuring artists, which before I edited it was placed in brackets at the end of the song title like most iTunes songs, but when i put it on my iPhone which is on manually handle music and videos, the artist which i removed from the song title do not appear, only the album artists, I have reset my iPhone completely using the delete all settings and content in the hope of it being the iPhones fault and it has not changed, urgh, what a waste of time / effort, now I have now gotten to the point of fed up cos I feel like I've tried everything, ive re-downloded them and done it all again, still nothing, so now I'm puzzled and don't understand why it wont appear the same on my iPhone as it does in my iTunes library, please can someone help me solve this pain in the ***, I'm OCD when it comes to music and if it doesn't appear the way it should i get annoyed / frustrated -.-
anyway thank you

Thanks very much I have contacted them via this. Just hope they respond quickly- rather annoing! Greatly appreciated though

Picture albums not showing up on live site. Sometimes there, sometimes not.

Hello,
I have started building a small family website, www.cahillpages.com , and I just noticed that some of the picture albums I have created are not showing up on the live site. They have been there before and if I reload the page sometimes one with come back but not all. They all show published in iweb.
Specifically http://www.cahillpages.com/Site/ChuckOffroad_Albums/Chuck_OffroadAlbums.html
I have a total of 6 albums there but most of the time only 4 show up live.
I do have some video in my albums, any chance that may be an issue?
Thanks

OK thanks. I got the missing albums to show up. I did realize that the missing albums did not even have video in them. The video still does not show up in my albums though. I am guessing because it is a pic page(album) not a designated movie page.
Thanks

Anybody having problems in Mail when sending reply messages from a thread and the message is not showing in the Sent mailbox?

Hello Folks;
Got a weird one...
I am sending replies from a thread in Mail and they seem to have been sent (sounds) but they don't show in the Sent mailbox... O-0 These messages seem to have been delivered to cyberspace as they don't show in my Sent mailbox on my IMAP server... This has been happening for the last month... I have checked and verified all of my IMAP settings and Mailbox behavior settings... This is really weird and maybe a bug.... I checked all of my other clients that have access to the server on the same account and these messages do not show there either.... Any ideas?
--prd54usa

The messages are getting to the recipient...
I am on a Comcast IMAP server if this has anything to do with it and the server settings are following the correct server port numbers, SSL settings, etc... I save Sent messages on the IMAP server for 90 days.... None of these "disappearing" messages were on the server for more than a couple of days.. Typically, these messages will get 'hung' in the Outgoing Mailbox for @30 seconds before sending... like they are being scanned for viruses or Mail can't connect to the server all of a sudden...
I anybody else here is on a Comcast IMAP server, and having this problem of disappearing Sent messages... This would tell us that it might be a Mail Provider issue with their outgoing server...
--prd54usa

When adding new pictures in an album the pictures do not show in the live site

Similar Messages

Maybe you are looking for