When Application server started

Hi,
in Tools 8.50 on Windows 2003, in which log file can I see the start time of Application server ?
I looked in APPSRV_0804.LOG and TUXLOG.080411 but did not see.
Thanks.

Has it been started today ? What about ?
grep "Server started" $PS_HOME/appserv/<domain_name>/LOGS/APPSRV_*Nicolas.

Similar Messages

Minisap application server starts automatically when i switch on computer

Hi there,
I've successfully installed Minisap on my computer, but my problem is the Application Server starts automatically whenever i switch on my computer which slows it down. I tried using XP's scheduled taks to run cmd Stop Application Server but it does not seem to work. Is there anyway i can solve this?
Thanks in advance.

Hi,
Your problem seems a general one and not miniSAP specific.
These are some steps that i think can be a possible solution:
1. Use 'msconfig' to uncheck any startup services of miniSAP (do not uncheck initialisation services)
2. CRITICAL OPERATION (Do not do this if u r not confident.) Use 'regedit' to delete the corresponding registry key in the 'Startup'. The path of this key differs from system to system. You can try searching for the name of the miniSAP application throuthgout the registry.
3. Check if there is any option in the settings of miniSAP to 'Automatically start' (I have not used miniSAP, just incase ther is any option)
Regards,
Kunal Gandhi

How to add an object in JNDI when a server starts?

I have an integration app. The app contains EJB project. The project contains EJB which reads data from LDAP.
My first version of EJB contains the following code:
Hashtable env = new Hashtable();
env.put(Context.INITIAL_CONTEXT_FACTORY,"com.sun.jndi.ldap.LdapCtxFactory");
env.put(Context.PROVIDER_URL, strProvider);
env.put(Context.SECURITY_AUTHENTICATION, strAuth); env.put(Context.SECURITY_PRINCIPAL,strPrincipal); env.put(Context.SECURITY_CREDENTIALS,strCredentials);
DirContext dirCtx = new InitialDirContext(env); // exception
All connection properties are hardcoded and it is not a good practice.
Also I can put those properties into deployment descriptor. But I am going to have some EJBs and each EJB has to have those properties into descriptors. It is not useful.
My idea: I would like to have whatever object which is called automatically when a server starts; this object creates InitialDirContext and put the context into JNDI. All EJBs lookup the context by a name. But I don't know how to do that.
And another question: how to change connection properties dynamically? My idea is putting the properties in XML Cache. And my object (which creates InitialDirContext) reads the properties from XML Cache. Can I handle a message that my properties in XML Cache have been changed and in this cases my object reads new properties and calls rebind() to update InitialDirContext?
Thanks,
Ivan

To bind an object into the JNDI tree check the documentation here:
http://e-docs.bea.com/wls/docs81/jndi/jndi.html#475702
If this is to be used by all your applications that you deploy on the server check out the startup/shutdown class documentation here:
http://edocs.bea.com/wls/docs81/ConsoleHelp/startup_shutdown.html
Cheers
IV

Help-Cubes are not getting started when Analytical server started in 11.1.1

Installed Oracle Essbase Analytical server along with Shared Services, Provider Services and Integration Services thru EPM v11.1.1.3. Shared services and provider services on Windows 2003 and Essbase Analytical Services and Integration Services on UNIX/AIX. All the components got configured successfully. Copied the essbase.sec from the server which has previous version (v11.1.1.1.0) of Essbase. We have been encountering couple of problems. The first one is the applications(cubes) didn't start when the analytical server started. The second one is when trying to start using MAXL script, the applications took long time (more than 30 minutes) to start.
Any suggestions that you may have in resolving this are appreciated. Thanks,

In the application properties, is the box 'Start application when Essbase server starts' checked? If not, that's why they didn't automatically start. Also, once you started them manually, does it still take 30 minutes to start? Or is shutdown and startup faster now?
Sabrina

JBOSS 4.0 Application Server start up problem?

1. JBOSS Application Server start up problem?
I have installed the JBOSS 4.0 application server in eclipse 3.4(Ganymede) in order to work with the adempiere open source ERP.When I start the JBOSS server,It displays the message “Server started in Xm:XXs:XXXms” in the console window.But the progress bar in server window is still running.Once the time out is over,it displays the message server cannot be started.
What should I do in order to make eclipse know that the server is started(message in console as server started) and set its status to “Started”?
2.Is it possible to copy and paste the .war created in eclipse 3.4 using JBOSS 4.0 to Glassfish v2 which requires archive file .ear form in NetBeans IDE 6.1?

i also noticed when I start the server some times the first line it display in the container will be starting Microcontainer some times it diaplays microkernel?You can find out reason based on that also?
Actually I was using 8080 port for my Oracle 10g Express Edition.Even when I change the port in server view,I had same problem.In order to recover from the problem,I finally changed my database port,My Jboss 4.0 has started succesfully. When I access the JBOSS in URL http://localhost:8080/jmx-console,i got the error can you tell me what can i do?
HTTP Status 500 -
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: Unable to compile class for JSP
     org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.java:97)
     org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:346)
     org.apache.jasper.compiler.Compiler.generateClass(Compiler.java:414)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:472)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:451)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:439)
     org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:511)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:295)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
     org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:75)
root cause
Unable to find a javac compiler;
com.sun.tools.javac.Main is not on the classpath.
Perhaps JAVA_HOME does not point to the JDK
     org.apache.tools.ant.taskdefs.compilers.CompilerAdapterFactory.getCompiler(CompilerAdapterFactory.java:105)
     org.apache.tools.ant.taskdefs.Javac.compile(Javac.java:929)
     org.apache.tools.ant.taskdefs.Javac.execute(Javac.java:758)
     org.apache.jasper.compiler.Compiler.generateClass(Compiler.java:382)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:472)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:451)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:439)
     org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:511)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:295)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
     org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:75)
note The full stack trace of the root cause is available in the Apache Tomcat/5.0.28 logs.
Apache Tomcat/5.0.28

Catch event when Application Server is shutdown

Hi All,
Actually I want to catch an event do something when weblogic server is shutdown.
How can I catch the event.
Any help would be highly appreciated.
I tried by implementing ServletContextListener interface, but in that I can only catch the event when weblogic is started, but not when it is shutdown.

Create a class that implements the ServletContextListener interface:
     public class myServletContextListener implements ServletContextListener
The ServletContextListener interface has two methods that must be implemented:
     public void contextInitialized(ServletContextEvent sce)
     public void contextDestoyed(ServletContextEvent sce)
Register the listener in the web.xml:
     <web-app>
          <context-param>
               <param-name>param1</param-name>
               <param-value>paramValue1<param-value>
          </context-param>
          <listener>
                                                 <listener-class>
                                                            com.listeners.MyServletContextAttributeListener
                 </listener-class>
          </listener>
          <servlet>
               <servlet-name>test</servlet-name>
               <servlet-class>com.test</servlet-class>
               <init-param>
                    <param-name>param1</param-name>
                    <param-value>paramValue1</param-value>
               </init-param>
               <load-on-startup>1</load-on-startup>
          </servlet>
          <servlet-mapping>
               <servlet-name>test</servlet-name>
               <url-pattern>/test</url-pattern>
          </servlet-mapping>
     </web-app>When the server starts up the servlet context (usually on server start up) it will call the contextInitialized method of your myServletContextListener class. When the server shuts down the servlet context (usually on server shutdown) it will call the contextDestroyed method of your myServletContextListener class.
With in these methods you can usually assume that the server is starting/stopping and do what it is you wish to do.
However there are two things to bear in mind:
1- Most servers offer a manager app that allows individual servlet contexts to be stopped/started without shutting down the server o you may get false results depending on you is managing the server.
2- I am not sure if the methods will be called if the server suffers a catastrophic error and crashes. For example a out of memory error. So you may miss a server shut down but the error should be logged in the tomcat log files.

Application Server Starting and then Stopping

For some reason my NSP server is starting with MMC, but then after about a minute it stops again. Please see the log files below. It seems to be a database problem but I don't know how to fix it...
dev_w0
trc file: "dev_w0", trc level: 1, release: "700"
* ACTIVE TRACE LEVEL           1
* ACTIVE TRACE COMPONENTS      all, MJ
B
B Fri Jun 20 23:50:24 2008
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' ...
B Library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' loaded
B Version of 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' is "700.08", patchlevel (0.19)
B New connection 0 created
M sysno      00
M sid        NSP
M systemid   560 (PC with Windows NT)
M relno      7000
M patchlevel 0
M patchno    23
M intno      20050900
M make:      multithreaded, ASCII
M pid        4928
M
M kernel runs with dp version 202(ext=109) (@(#) DPLIB-INT-VERSION-202)
M length of sys_adm_ext is 360 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 4928) [dpxxdisp.c   1288]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm)          5280     (880)
M DpShMCreate: sizeof(tm_adm)          3351072     (16672)
M DpShMCreate: sizeof(wp_ca_adm)          1200     (60)
M DpShMCreate: sizeof(appc_ca_adm)     1200     (60)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
M DpShMCreate: sizeof(comm_adm)          528048     (1048)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm)          0     (72)
M DpShMCreate: sizeof(vmc_adm)          0     (1076)
M DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
M DpShMCreate: sizeof(gw_adm)     48
M DpShMCreate: SHM_DP_ADM_KEY          (addr: 04C80040, size: 3950264)
M DpShMCreate: allocated sys_adm at 04C80040
M DpShMCreate: allocated wp_adm at 04C81978
M DpShMCreate: allocated tm_adm_list at 04C82E18
M DpShMCreate: allocated tm_adm at 04C82E48
M DpShMCreate: allocated wp_ca_adm at 04FB5068
M DpShMCreate: allocated appc_ca_adm at 04FB5518
M DpShMCreate: allocated comm_adm at 04FB59C8
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 05036878
M DpShMCreate: allocated gw_adm at 050368B8
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 050368E8
M DpShMCreate: allocated wall_adm at 050368F0
Y *** ERROR => ztta/diag_area is 64000. [sapinit.c    325]
Y *** ERROR => ztta/diag_area adjusted to 128000 (minimum value). [sapinit.c    327]
Y *** ERROR => ztta/cua_area is 90000. [sapinit.c    963]
Y *** ERROR => ztta/cua_area adjusted to 250000. [sapinit.c    967]
X EmInit: MmSetImplementation( 2 ).
X MM diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Fri Jun 20 23:50:25 2008
M ThInit: running on host PackardBell
M calling db_connect ...
C
C DBSDBSLIB : version 700.08, patch 0.019 (Make PL 0.23)
C MAXDB shared library (dbsdbslib) patchlevels (last 10)
C    (0.019) UPDSTAT optimized (note 870327)
C    (0.010) MaxDB DBSL patch collection 1 2005 (note 850830)
C    (0.009) New stream compression available with LVC 7.6.0 b12 (note 835809)
C    (0.008) Support of SDBUPDEXCL (note 847616)
C    (0.005) Switch stream compression on/off (note 835809)
C    (0.005) ITAB stream handling optimized (note 835809)
C
C
C Loading SQLDBC client runtime ...
C SQLDBC SDK Version : SQLDBC.H 7.6.0    BUILD 002-121-083-965
C SQLDBC Library Version : libSQLDBC 7.6.0    BUILD 018-123-113-357
C SQLDBC client runtime is MaxDB 7.6.0.018 CL 113357
C INFO : SQLOPT= -I 0 -t 0
C Try to connect (DEFAULT) on connection 0 ...
C *** ERROR => Connect to database failed, rc = -10757 (XUSER error (the USERKEY is unknown))
[dbsdbsql.cpp 98]
C Try to connect (SQLOPT) on connection 0 ...
C *** ERROR => Connect to database failed, rc = -10709 (Connection failed (RTE:Database name is missing))
[dbsdbsql.cpp 118]
B ***LOG BV3=> severe db error -10709    ; work process is stopped [dbsh#1 @ 1195] [dbsh    1195 ]
B ***LOG BY2=> sql error -10709 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> Connection failed (RTE:Database name is missing) [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c   1391]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   9995]
M
M Info for wp 0
M
M    stat = 4
M    reqtype = 1
M    act_reqtype = -1
M    rq_info = 0
M    tid = -1
M    mode = 255
M    len = -1
M    rq_id = 65535
M    rq_source = 255
M    last_tid = 0
M    last_mode = 0
M    semaphore = 0
M    act_cs_count = 0
M    control_flag = 0
M    int_checked_resource(RFC) = 0
M    ext_checked_resource(RFC) = 0
M    int_checked_resource(HTTP) = 0
M    ext_checked_resource(HTTP) = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M    vm = V-1
M
M *****************************************************************************
M *
M * LOCATION    SAP-Server PackardBell_NSP_00 on host PackardBell (wp 0)
M * ERROR       ThInit: db_connect
M *
M * TIME        Fri Jun 20 23:50:25 2008
M * RELEASE     700
M * COMPONENT   Taskhandler
M * VERSION     1
M * RC          13
M * MODULE      thxxhead.c
M * LINE        10180
M * COUNTER     1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 4928) [dpnttool.c   327]

Ok I eventually figured it out... The SAP Application Server starts the database using the XUSER authentication - For some reason my system lost all settings for this.
In order to recreate, I had to use the command prompt and use the XUSER command.
Firstly "XUSER LIST" lists all user keys - I had none.
I then needed to set the default XUSER:
XUSER -d NSP -u SAPNSP,<password>
<password> is the password for the user specified
Then I created the "c" key:
XUSER -d NSP -U c -u SAPNSP,<password>
The reason I set up the "c" XUSER is because I noticed that in "\usr\sap\NSP\DVEBMGS00\exe\" there is a batch file used to start the DB - "strdbs.cmd". Inside this file it uses "c" as the user key in order to set the state of the DB.
After all of that it worked again...

Start deployed applications when J2EE Server starts

Hi experts,
This is my problem.
I've updated my Netweaver 04s Developer Workplace from SPS1 to SPS10.
The problem I have is that when I start my J2EE Server via MMC, the applications (j2ee,ear,webdynpro,...) I deployed don't start.
If in my Visual Administrator I go to server->services->deploy most of them are not started. I can start them manually, but that's not a solution...
I suppose there are any possibities to set this applications to start when the server is started.
Any ideas?
Thanks a lot.
Alberto.

Hi Alberto
If you can start the services manually w/o problems, then maybe you can try to change the startup mode to 'always' so that the service is started automatically. You should be able to check this via Configtool. Switch to the 'configuration editor' mode and go to cluster_data -> server -> cfg -> services. Look for the service and make click on the propertysheet. Usually you can modify the startup mode there.
I hope this helps.
Regards,
Désiré

Executing a program when the server starts

I have developed a chat program and to run it I have type "java ChatManager".
Is there a way where this program can start automatically when I start the tomcat.
Regards,
Sharad

The chat application is a java file. I need to keep it running so that I can use it in my applet. The problem is after I start the tomcat, I have start the chat application and for this I open a new window and type "java ChatManager". Once this is done I can start using the chat applet. Is there a way, where the chat application starts automatically when the tomcat starts. Do I need to add something in the server.xml file for this.
Regards,
Sharad

Trap event when Application server is shutdown

Hi All,
Actually I want to catch an event do something when weblogic server is shutdown.
How can I catch the event.
Any help would be highly appreciated.
I tried by implementing ServletContextListener interface, but in that I can only catch the event when weblogic is started, but not when it is shutdown.

Why not? ServletContextListener.contextDestroyed() will always be triggered when the container is shutting down.

Initialising class when J2EE server starts

Hi,
I am facing a problem. I wish to instantiate a class when the J2EE/ tomcat server starts. This is similar to the property set in weblogic as
weblogic.system.startupClass.startup = <name of ur startup class>
Here we can specifiy the class to be instantiated during startup of server.
Can i do something similar in tomcat/ j2ee server?
I do not wish to use a servlet since my webapplication contains jsps and other supporting classes and my own apis.
Thank you in adv.
...supriya.

if you use ServletContext Listeners you should be ready as far as web app is concerned. Most servers I believe offer JMX integration so that you can listen for server startups. : )

Euro symbol not displayed/stored correctly when Application Server on AIX

Hi,
Up till now we have an BC4J/ServiceFile/UIX application (generated with JHeadstart)running on Windows OS (Application Server and Database).
The customer has decided to move the Application Server (10g) to an AIX machine.
When testing the application we find:
1) Euro symbol () is displayed en stored correctly when stored in varchar2 db-columns
2) The Euro symbol is not stored correctly when stored within a CLOB db-column AND when the AS runs on an AIX.
When the Application Server runs on a Windows-platform the euro symbol is displayed and stored correctly.
Our first guess was some NLS_LANG configuration problems on the AIX-machine. We tried however to set the NLS-LANG to "DUTCH_THE NETHERLANDS.WE8MSWIN1252". This had no visible effect.
Are there other (if any) NLS-settings which influence the way the CLOB-columns are dealt with?
When connecting to the same database from a Windows-Application Server no problems occur, thus showing that the problem is AS/OS specific.....
Our guess is that is related to BC4J and how BC4J communicates with the database.
Is this problem a known bug/issue?
Any ideas how to solve this problem?
We are using JDeveloper 9.0.3.1 (build 1107), Business Components Version is 9.0.3.10.62
Thanks,
Anthonie

Sorry, I'm having difficulty understanding what's happening here. Let me see if I get it.
You have an application that stores the euro symbol in a CLOB. When the server that handles this application is on AIX, the euro is not properly displayed in the client. When the server is on Windows, it displays properly.
Is that the issue? If so, it could be a number of things, but it's probably related to the character set differences between the two database servers.
Have you been able to reproduce this without using Business Components?
-SteveA

Unable to load forms Application Server starting page as comprd to earlier

I have insatalled my Allication in Forms Application server 10g and it was running succesfully up to yesterday.
All of a sudden my application got slow down,and it is taking more time to load my first page(say Logon.fmx).
Clearly to say a pop like "oracle Application Server Forms 10g" is displaying for more time rather than skipping to my Logon.fmx.
pls help

I saw this on another windows machine as well. I believe that the port should be 1800 and not 18100. Look into the emd.properties and check if they are configured correctly.
cu
Andreas

Null argument for startup classes when managered server starts

Hi Everyone,
We have a Weblogic 10.3.5 clustering environment. the environment seems to work fine. I am able to have the servers (both Admin and Managed) and deployed applications running without any problems. However, I just notice that, every time when I start the Managered servers, I got the following information in the system log. It appears that they are start-up classes, but with null argument. Are they normal or not?
Thanks in advance,
John
####<Feb 22, 2012 11:28:27 AM EST> <Info> <WebLogicServer> <entwl2u-vm.co.pinellas.fl.us> <Pinellas1uCluster1MS2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329928107258> <BEA-000256> <Invoking oracle.dms.wls.DMSShutdown.main(null)>
####<Feb 22, 2012 11:28:27 AM EST> <Info> <WebLogicServer> <entwl2u-vm.co.pinellas.fl.us> <Pinellas1uCluster1MS2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329928107769> <BEA-000256> <Invoking oracle.ias.cache.Shutdown.main(null)>
####<Feb 22, 2012 11:40:08 AM EST> <Info> <WebLogicServer> <entwl2u-vm.co.pinellas.fl.us> <Pinellas1uCluster1MS2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329928808600> <BEA-000256> <Invoking oracle.jrf.wls.JRFStartup.main(null)>
####<Feb 22, 2012 11:40:08 AM EST> <Info> <WebLogicServer> <entwl2u-vm.co.pinellas.fl.us> <Pinellas1uCluster1MS2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329928808682> <BEA-000256> <Invoking oracle.security.jps.wls.JpsWlsStartupClass.main(null)>
####<Feb 22, 2012 11:40:08 AM EST> <Info> <WebLogicServer> <entwl2u-vm.co.pinellas.fl.us> <Pinellas1uCluster1MS2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329928808790> <BEA-000256> <Invoking oracle.core.ojdl.weblogic.ODLConfiguration.main(null)>
####<Feb 22, 2012 11:40:17 AM EST> <Info> <WebLogicServer> <entwl2u-vm.co.pinellas.fl.us> <Pinellas1uCluster1MS2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329928817314> <BEA-000256> <Invoking oracle.jrf.AppContextStartup.main(null)>
####<Feb 22, 2012 11:40:17 AM EST> <Info> <WebLogicServer> <entwl2u-vm.co.pinellas.fl.us> <Pinellas1uCluster1MS2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329928817318> <BEA-000256> <Invoking oracle.as.jmx.framework.wls.spi.StartupListener.main(null)>
####<Feb 22, 2012 11:40:17 AM EST> <Info> <WebLogicServer> <entwl2u-vm.co.pinellas.fl.us> <Pinellas1uCluster1MS2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329928817432> <BEA-000256> <Invoking oracle.j2ee.ws.server.WebServiceServerStartup.main(null)>
####<Feb 22, 2012 11:40:17 AM EST> <Info> <WebLogicServer> <entwl2u-vm.co.pinellas.fl.us> <Pinellas1uCluster1MS2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329928817492> <BEA-000256> <Invoking oracle.ias.cache.Startup.main(null)>
####<Feb 22, 2012 11:40:17 AM EST> <Info> <WebLogicServer> <entwl2u-vm.co.pinellas.fl.us> <Pinellas1uCluster1MS2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329928817493> <BEA-000256> <Invoking oracle.dms.wls.DMSStartup.main(null)>
####<Feb 22, 2012 11:40:18 AM EST> <Info> <Management> <entwl2u-vm.co.pinellas.fl.us> <Pinellas1uCluster1MS2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329928818207> <BEA-141278> <Java entropy configuration is: System property "java.security.egd= null"; JRE's java.security file property "securerandom.source= file:/dev/urandom"; Blocking Config= false; JDK version= 1.6.0_26; Operating System= Linux.>
####<Feb 22, 2012 11:40:48 AM EST> <Info> <WebLogicServer> <entwl2u-vm.co.pinellas.fl.us> <Pinellas1uCluster1MS2> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329928848987> <BEA-000256> <Invoking oracle.security.audit.ajl.loader.JEEAuditLoader.main(null)>

Hi John,
This is Ok. Those are just info messages. Thery are not warnings or errors, so nothing to worry about.
If the classes are invoked with null arguments and no exception is thrown, then is means that the class is able to have a null argument, so nothing to worry about again.
Regards,
Cris

Permission error when WebLogic Server starts up

Dear WebLogic gurus
When I try to startup WebLogic server with 80 listening port in Solaris 2.6,
it did not startup due to permission problem.
The error log said that
Sat Dec 11 06:11:02 GMT 1999:<E> <ListenThread> **** Unable to create server
socket. Perhaps another process is using port 80.
Sat Dec 11 06:11:02 GMT 1999:<E> <ListenThread> java.net.BindException:
Permission denied
To solve this problem, I just tried to startup WebLogic with root user
because I was sure that another process did not run with port 80.
It works now but with only super user. This kind of problems did not happen
with 7001 port.
What's the reason of this ?
Thanks in advance

Hi there.. Looking at your error, it appears that you there is a web server
already running and bound to port 80. Check with your system admins to see if
you have a web server installed on port 80. Another easy way to figure out
would be a simple telnet to your server name at port 80. Try this:
$ telnet localhost (or servername) 80
GET / HTTP/1.0
If that works any returns any data, you've got a webserver running at port 80.
Work with your system admin's to turn off that running webserver and picking
another port for WebLogic.
Under UNIX, anything under port 1024 is considered a privileged port and root
would have to start the server to be able to bind to port 80. You'll also want
to enable the setUID program in weblogic.properties. Look for the following
lines in your weblogic.properties and see if they apply.
# UNIX only: If running on port 80 on UNIX, enable the setUID program
#weblogic.system.enableSetUID=false
# UNIX only: Unprivileged user to setUID to after starting up
# WebLogic Server on port 80
#weblogic.system.nonPrivUser=nobody
Hope this helps.
--Vinny
Changyong wrote:
Dear WebLogic gurus
When I try to startup WebLogic server with 80 listening port in Solaris 2.6,
it did not startup due to permission problem.
The error log said that
Sat Dec 11 06:11:02 GMT 1999:<E> <ListenThread> **** Unable to create server
socket. Perhaps another process is using port 80.
Sat Dec 11 06:11:02 GMT 1999:<E> <ListenThread> java.net.BindException:
Permission denied
To solve this problem, I just tried to startup WebLogic with root user
because I was sure that another process did not run with port 80.
It works now but with only super user. This kind of problems did not happen
with 7001 port.
What's the reason of this ?
Thanks in advance

When Application server started

Similar Messages

Maybe you are looking for