When are the rentals going to start for this?

I have an Apple TV (40g) and it's still the old firmware and says my software is up to date.
what gives? user error? not released yet?

Movie rentals are already available for the US, the software upgrade for the tv will be about 2 weeks.

Similar Messages

When are the glitches going to be fixed??

I am seriously thinking about returning the BBz10 and returning to Android based phone. Since 0800 today, my phone has shut off and rebooted about 10 times and it is only 1330 now! Yesterday it did the same thing. I had this issue before with my other Z10 (which, by the way, decided to completely die and needed to be replaced) and then I did the update (10.1.0.2039 that was to fix the issues!). That lasted all of about 3 weeks! Now, mind you, I am a die hard BB fan and love the phones but now I am trully thinking about returning to the Android OS and to be done with these issues with the BBz10. I am tired of all the issues that it keeps having. One thing that really gets to me in the fact that when the phone reboots (spontaneously) it decides that it is going to remove my contacts. Then it reboots, they get added back more than once!

Many of the issues in your posts are not "glitches" but changes to the platform made by eBay.ca For more information, take a look at today's "weekly hour" and you will find answers to many of your questions: http://community.ebay.ca/t5/Weekly-Board-Hour-Session/July-29th-2015-Weekly-Board-Hour/m-p/308506#U308506

When ever the power goes out or I restart my iMac the external hard drive that is used by Time Machine for backups is dismounted ?

When ever the power goes out or I restart my iMac the external hard drive that is used for backups by Time Machine is dismounted and all backups are gone. I can reselect it and it will start working again, but I am worried if the iMac hard drive should fail will I be left without a backup ?

fzgy wrote:
"Mac OS X can't repair the disk. You can still open or copy files on the disk, but you can't save changes to files on the disk. Back up the disk and reformat it as soon as you can."
It's possible a heavy-duty 3rd-party disk repair app can fix it, but they're expensive (DiskWarrior is about $100), and there's no guarantee it can do it.
Am prompted to reformat but I don't have a good understanding of what this means and how to do it.
That will erase it. See Time Machine - Frequently Asked Question #5.
It sounds very much like the disk is beginning to fail, although it's possible there's a bad port, cable, connection or power supply (if it has its own).
I'd suggest getting a new one, and using it for your Time Machine backups; once you have a good backup there, reformat the old one (and select Security Options to write zeros to the whole drive -- if that fails, you know the drive is toast). Use it for secondary backups, per FAQ #27. If it has failed, get a second new one for secondary backups.

My Mac won't start up and Im using DiscWarrior. When I restart the computer with "c" down, the screen goes black. Is this ok? Do I just wait it out?

my Mac won't start up and Im using DiscWarrior. When I restart the computer with "c" down, the screen goes black. Is this ok? Do I just wait it out?

Have you just tried repairing with Disk Utility?
Repair the Hard Drive and Permissions - Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.

My MacBookPro (mid 2012) will not complete the boot process. Yosemite's progress widget gets about 1/3 to 1/2 way across when the logo disappears and the screen goes all white for 10-15 secs or so, then the machine shuts down and restarts.

My MacBookPro (mid 2012) will not complete the boot process. Yosemite's progress widget gets about 1/3 to 1/2 way across when the logo disappears and the screen goes all white for 10-15 secs, then the machine shuts down and restarts. This sequence will repeat seemingly forever unless I shut it down manually.
I upgraded to Yosemite from Mountain Lion a couple months ago, skipping Maverick completely, and I've done any associated updates that Apple told me about. I don't recall which version of Yosemite I have, but I'm sure it is the "latest and greatest".
I've tried re-starting in Safe Mode / Safe Boot and that does the same thing as described above except without the endless restarts. Instead of restarting at some point, SafeBoot proceeds to the white screen and then it hangs until I restart it manually. (I've waited as long os 20-30 minutes with no response).
When I tried the option-command-p-r key combo I never get any chimes or other noises besides the original 1 time boot sound that you would expect to get when starting up a macbook pro.
I was using the mac quite normally (meaning I was doing work I normally do on it and there was no indication of anything wrong) immediately prior to this happening.
The machine is BootCamp(ed) with Windows 8.1 which I use from a VMWare virtual machine instead of natively so that I can have both OSes running at the same time. I also think this is unrelated to my problem. I have been using this setup for more than 2 years.
My upgrade to Yosemite was uneventful and I thought it went well and was very smooth. I don't want to lead attention away from Yosemite, but at this point my problem does not seem related to the upgrade.
Any help is appreciated.

Install or Reinstall OS X from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
      left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
      the Security button and set the Zero Data option to one-pass. Click on
      the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
           because it is three times faster than wireless.

When are You guys going to have the iphone 5?

When are You guys going to have the iphone 5?

Wjosten,
After your post, and more people like this, tomorrow may be a nice day to go for a bike ride and a bad day to place a call to Apple at the end of the day.
So many people waiting at home for a free iPhone 5 delivery and at the end people calling Apple to complain that their phone did not arrive.

When are the faster i7 quad core (2.7ghz) chips going to ship in the MacBook Pros, Intel announced them over a month ago. Trying to make a buying decision.

When are the faster i7 quad core (2.7ghz) chips going to ship in the MacBook Pros, Intel announced them over a month ago. Trying to make a buying decision.

We can't speculate, when it appears it will appear.
Are these mobile processors? Because that will answer your question right there.

HT204032 Do the mail and calendar apps need to be launched when the mac goes to sleep for them to receive new messages in power nap?

I was just trying to figure out if the Mail and Calendar apps need to be launched and running before the mac goes to sleep for them to recieve new messages during power nap.

You must open Mail and Calendar

When are the "education" cheaper iMacs hiting the market ?

Hi there,
I'm actually planning on getting the iMac 20, but the news about the price reduction of the 17" for Students, etc. made me wet my pants out of happines.
I just checked now and in the Education store the prices are still the same.
When are the new prices for the 17" iMacs going to be available ?
Any guess about the 20" iMac getting a price reduction as well ?
That would be a heck of a x-mas gift from Mac to compete against the new Vista PCs end of the year.
Cheers! cj.

So.... then what ?
On that Link(article) is even more confusing cuz it starts saying it was pulled out... blah, blah, blah and ends saying is available through the Apple Education Store, who many here already confirmed it is not!
Are we all getting locos? or maybe Appl has its PMS and doesn't know what to do with the whole thing.
Maybe after so much interest they pulled it out and they are waiting for end of year sales to put it again and compete with the new Vista PCs...
...i know i keep up with my "Hope Apple give us a great deal by x-mas to convince us of buying a Mac and not a new Vista PC" conspiration theory.
But hey.... we all can dream, right?!

What are the 3-bit field choices for Hw_Arm_Sel in PCI-6601

Hi,
I am programming our own driver to operate the PCI-6601. For our application we need hardware arm option. I know it is possible to use 2 counters for that, but NI-TIO should support also hw_arm. Although it is not explained in the registry document at all, after some tedious check in the DDK examples I found that this bits are located in the Gi counting mode register. I know the position of the HW_enable as well as the position of the 3 bits for pin sellect options. What I do not know is What are the 3-bit field choices for Hw_Arm_Sel . I contacted NI support but got no support. How can NI sell boards and when a customer who is not using LAbview or Measurement Studio or DDK, but is implementing his own driver is then so arrogantly turned down from NI? Also, how can NI publish just part of the registers the board support, and when a customer contacs and asks for some registers get not at all support? I can not foretell the missing registers, and it is pretty unprofessional to document just partly the registers of 660x devices. And on request you got nothing.
I hope someone from the community know about this Hw_Arm_Sel 3 pin options. Otherwise, there is just an option of error and trial. Or simply throw the board in the garbage.
Dr. Kirco Arsov
Solved!
Go to Solution.

Hi Kirco,
I have some more information for you :-)
I haven't been able to speak to the developer who is the most familiar with TIO programming since he's out of the office, but I have come across his notes from when he was writing support for the DAQmx driver.
As I described earlier, the HW_Arm_Sel bits don't select a connector I/O pin, but an internal trigger signal. There are seven internal trigger lines, and the HW_Arm_Sel bits map directly to the internal trigger signal: 0b000 - 0b111 map to 0d0 - 0d7. In order to route an I/O pin to an internal trigger, you must also write to a few more registers.
From what I've read, there are two more register families that need to be programmed: TG_x_LevelEdgeReg and TG_x_CombinationReg, where x is the internal trigger number. In your case, you only need one pin from the I/O connector to be your arm start trigger, so TG_0_LevelEdgeReg and TB_0_CombinationReg will suffice for your application.
TB_0_LevelEdgeReg :: Offset 0x660
TG_0_LevelEdgeReg is only 8 bits wide, and maps as follows:
7..6: EdgeMode
5..0: LESel
LESel selects the I/O connector pin to use as the source for the internal trigger signal. 0d0 - 0d39 will select the I/O pin of the same number. NB: behavior for TG_x_LevelEdgeReg is more limited for triggers 1-7, and only a small subset of the I/O pins can be selected for those trigger signals. Trigger 0 can use any I/O pin. Setting these bits to 0d63 forces the trigger source low, and can be used as a way to 'unroute' it when you're finished with your program.
EdgeMode determines whether the TIO will detect an edge of the incoming signal, or just pass the signal level straight through. When detecting edges, it will latch the signal and generate a single TIMEBASE3 pulse instead. 0b00 sets level mode; 0b01 sets rising edge; 0b10 sets falling edge; 0b11 sets either edge.
TG_0_CombinationReg :: Offset 0x6A0
TG_0_CombinationReg is 32 bits wide, and has three fields of interest:
19..16: CombFunction
5..4: CombTypeB
1..0: CombTypeA
CombTypeA controls which trigger subsystem to use as the source for the trigger signal. Since you're coming from an I/O pin and using the edge/level subsystem, you must set these bits to 0b01.
CombTypeB is similar to CombTypeA, and although you won't be using trigger B, set it to 0b01 to be safe.
CombFunction performs a simple logic function on A and B. Since you're only using a single I/O connector, you only need the A output, so set these bits to 0b1100.
All of the other bits should be set to 0b0.
Unfortunately, I'm unable to test these statements since my test machine is currently being used for another research project. Please let me know what happens if you decide to test.
Joe Friedchicken
NI VirtualBench Application Software
Get with your fellow hardware users :: [ NI's VirtualBench User Group ]
Get with your fellow OS users :: [ NI's Linux User Group ] [ NI's OS X User Group ]
Get with your fellow developers :: [ NI's DAQmx Base User Group ] [ NI's DDK User Group ]
Senior Software Engineer :: Multifunction Instruments Applications Group
Software Engineer :: Measurements RLP Group (until Mar 2014)
Applications Engineer :: High Speed Product Group (until Sep 2008)

What are the defaul username and password for SQL Plus ?

hello, what are the defaul username and password for SQL Plus ? i'm using the client 11.2.0.1

You'll need to download the full database installation files for the platform you are using. They are two .zip files, about 2.2 gig total.
I'm not going to give you the link because you should be able to find it easily. You have to read and accept the license agreement anyway.
When you install it, you'll be given several options about the type of database you want.
But before you install anything, you should read the installation manual for your platform.

HT1498 I rented a movie to watch it now and it said it was not going to start for like 18 hours. Hence, I never got to watch it. How do I get a refund?

I rented a movie to watch it now and it said it was not going to start for like 18 hours. Hence, I never got to watch it. How do I get a refund?

Hello sansonj
It there was an issue with your rental, then report it to the iTunes Store.
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/HT1933
Regards,
-Norm G.

What are the connections to be done for file-to-RFC scenario in XI & R3 ?

Hi,
What are the connections to be done for file-to-RFC scenario in XI & R3 & also if it is RFC-to-File .
I need to know what type connections used for file-to-RFC in backend .
In SLD it should be Third Party or WEB AS ABAP..

Hi Nandan,
Perform the following configurations...
SAP XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
SAP R/3
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
Regards
San
Remember to set the thread to solved when you have received a solution there is a Way.

WHY ARE THE UK USERS PAYING MORE FOR THE CLOUD SERVICES????

WHY ARE THE UK USERS PAYING MORE FOR THE CLOUD SERVICES????
OR IS IT JUST LAZYINESS THAT YOU CHANGE THE DOLLAR SIGN FOR THE POUND?

it obviously doesn't, but then again some people or organisation only care about price when it comes to purchasing their laptops, and it is hard to justify making a special model for a selected few.
Sure everything can be done if there is a market for it, but Lenovo won't know how large the market is before hand, as such they are hedging a bet by not moving with the market (which Lenovo have done on many occasions). I guess the finanical return is not the worth the risk for Lenovo to keep the 4:3 or 16:10 screens.
But this debate has been going back and forth for a long time, so no point bringing it up again and again.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

What are the best imovie, mpeg4 settings for making dvds?

What are the best imovie, mpeg4 settings for making dvds?

• iMovie'08 to 11
- Share to Media Browser - AND as Large (or Medium) - HD or other resolutions degrades the final result
iMovie'08 to 11 are not the tools of choise if quality is important as they all degrade the picture by discarding every second line when going from, Event's to Project's and this can not be mended.
iMovie HD6 and FinalCut delivers 100% of what any DVD-Authoring program needs.
• DVD is as standard MAX - intrelaced SD-Video - and can not be any better than this
• iDVD does only care about TIME / Duration as
iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1) and iDVD 6 has the two last ones
• Professional Quality
(movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
• Best Performances
(movies + menus less than 60 min.) - High quality on final DVD (Can be best for short movies)
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
(movies + menus up to 120 min.) - slightly lower quality than above
Menu can take 15 minutes or even more - I use a very simple one with no audio or animation like ”Brushed Metal” in old Themes.
About double on DL DVDs.
• iDVD Does Region = Zero (to be played everywhere)
• Frame rate - DVD can be in two types PAL (25fps) and NTSC (29.97fps)
If Your material is 30fps then keep to NTSC (29.97fps), if 25fps keep to PAL.
One can feed iDVD the other frame rate - BUT RESULTING DVD WILL BE BAD
I use JES_Deinterlacer (free on Internet) to convert all material to the same and final frame rate
• NTSC - US etc
• PAL - EU etc
Yours Bengt W

When are the rentals going to start for this?

Similar Messages

Maybe you are looking for