When attempting to install trial elements 11get amessage error installing shared technologies

when attempting to install trial elements 11get amessage error installing shared technologies

Hi hutchie4,
The error indicates that one or more of the following Shared Technologies failed to install:
Adobe Player for Embedding
Adobe Help
Camera Raw plug-in
Camera Raw profiles
Adobe ExtendScript Toolkit
Adobe XMP Panels
Microsoft Visual Studio runtimes
To resolve these issues, use the Adobe Support Advisor (ASA) to analyze the installation log file. For instructions, see Analyze install logs with Adobe Support Advisor (ASA).
Note: If you are using a downloaded installer, or running the installation from the hard drive, the Shared Technologies can fail because of the installation path. Copy the installation files to a folder to the root of the drive, such as C:\PSE<versionnumber>Installer\, and rerun the installation.
This Adobe document lists installation troubleshooting steps, including the "Shared Technologies" error
: http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-installation-photoshop-elements- premiere.html

Similar Messages

When installing Premiere Elements I get an error with Shared Technologies

When installing Premiere Elements onto a Windows XP Service Pak 3, I get an error with Shared Technologies.

Hi,
Thx for the reply.
I had Bridge open in background and once I closed that Elements installed correctly.
Thank you.

When I try to install PS Elements 12, error regarding shared technologies. [was:NAH1952]

When I try to install PS Elements 12 I got the error regarding shared technologies. Troubleshooter suggested I rename OOBE folder to OOBE.bak. Did this and repeated a few more times with same result. Now when I try to run installer it tries to unistall PS 12 and gives me error 2343 Specified path not found. What's next?

http://helpx.adobe.com/photoshop-elements/kb/error-2343-specified-path-empty.html

TS1424 When attempting to download iTunes I keep getting error The system administrator has set policies to prevent this installation. This is home PC and I am administrator. Any help is appreciated.

When attempting to download iTunes I keep getting error The system administrator has set policies to prevent this installation. This is a home PC and I am the administrator. Any help would be appreciated.

Hi PSpark!
I have an article here that I believe will help you troubleshoot this issue a little further. That article can be found right here:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Thanks for coming to the Apple Support Communities!
Regards,
Braden

Was able to download and install Premier but can't install Photoshop Elements - getting multiple error messages (pirated software, etc). Any ideas?

Was able to download and install Premier but can't install Photoshop Elements - getting multiple error messages (pirated software, etc). Any ideas?

download from adobe.com or prodesigntools.com.
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3 | 2.7(win),2.7(mac)
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
window using the Lightroom 3 link to see those 'Important Instructions'.

I want to trial Elements 11 without damaging installed Elements 9

I want to trial Elements 11 to confirm that it works with my new camera.
I have Elements 9 working and I do not want to damage that installation until I have decided to buy 11.
I downloaded the trial. As soon as I start it I get an intimidating question with no help, description or documentation, and I can't find any comment on Adobe's site.
The choices are:
1/ Upgrade My Catalog to version 11 - which I clearly do not want to do at this time
2/ Create a new catalog.
What I want to know is that the 'new' catalog is additional and would not overwrite the existing elements 9 catalog. I will certainly not proceed until I am confident.

Have a look there :
http://help.adobe.com/en_US/elementsorganizer/using/WSae2ea3b149d0c3591ae939f103860b3d59-7 f59_WIN.html
See the paragraph :
Notes for users upgrading their catalogs to Photoshop Elements 11
The first choice, upgrading, means that a new catalog is created in the PSE11 format, leaving the old one unchanged.
You can work with both versions, each keeping its own catalog.
The catalogs are totally independent : the changes you do in one are not known to the other.
With the changes in PSE11 you'll have to learn how to deal with the new interface, so the first choice (conversion) will be necessary anyway some day...

Fatal error when installing master collection "[FATAL] Setup - Error installing C:\Users\Desktop\MasterCollection_CS6_LS6\packages\core\PDApp.pimx package. Return Value of pim_installPackage = -1

Hi,
When I try to install a trial product like photoshop cs6 or master collection cs6 I keep getting the error " Installer failed to initialized". I used Adobe cleaner to remove all cs6 products and tried again, but no luck, the same error.
I opened the the log file and found that line :
[FATAL] Setup - Error installing C:\Users\moshe-a\Desktop\MasterCollection_CS6_LS6\packages\core\PDApp.pimx package.
Return Value of pim_installPackage = -1
Any idea how to fix the problem?
Thank you, Momu

start at the top and work your way down applying applicable fixes until your problem is resolved.
if cc (win): https://helpx.adobe.com/creative-cloud/kb/creative-cloud-desktop-application-failed.html
if, your error is:
"Installer failed to initialize. File not found." or "Installer failed to initialize. This could be due to missing files."
first, rename OOBE Folder to OOBE.old.
to find OOBE:
64 bit win OS: Program Files x86\Common Files\Adobe\OOBE
32 bit win OS: Program Files \Common Files\Adobe\OOBE
mac os: HD>library>application support>adobe>caps
mac os: USER>library>application support>adobe>OOB
if that fails or isn't the exact error you see, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall.
if you're using a dvd to install:
copy the disc contents to a desktop directory and install from that directory.
if you're using a mac:
1. Try to Create a new user account in Mac with Administrator Priviledges.
2. Login to the New user, Navigate to Mac HD> Application> Utilities> Adobe Installer folder, Locate products like Adobe Reader, Adobe Flash, Adobe Air and un-install them
3. Navigate to User Library> Application Support> Adobe and move Adobe to Trash.
4. Navigate to Mac HD> Library> Application Support> Adobe and move Adobe to Trash.
5. Start the installation again.
if everything applicable above fails, check your installation logs:
http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-install-using-logs-elements.html

Premiere elements 11 failed to install with the error about shared technologies

PRE 11 failed to install with the error "The installation process has encountered an error while installing shared technologies. Please restart your system and try again" all that does is uninstall everything and I have to restart agin with the same error and we go on. So far the only way it is working is at the point of the "error message" I run task manager and stop the installer, I know it's leaving files that should be removed by the installer, but it worked. This information was gained on one of the forums and seems to work. Yesterday was the first time I really used it fully and although I was able to create a project I cannot output it as a file (mpg), it starts to output ok then throws up an error and fails. As PRE 10 was still installed I imported the project (which amazed me) into PRE 10 and outputted as required with no error. All this may be due to something being wrongly installed or not being installed in PRE 11, I don't know. Can anybody help
Dennis
using Windows 8 Pro
PS I downloaded the Adobe Support adviser and No errors

See the following help document:
http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-installation-photoshop-elements- premiere.html

Getting error message when attempting to access iTunes store. UNknow error occurred (0x800903318). make sure your netwrok connection is active.

In iTunes software get error message when attempting to access iTunes Store. Could not connect. Unknown error occurred (0xx800903318). Make sure your network connection is active and try again...NG

Hello there,
Thanks for using Apple Support Communities.
Since this error 0x800903318 combined with the network connection error message is occuring when you're trying to connect to the iTunes Store, I'd like you to please follow the steps in the article linked to below.
Apple software on Windows: May see performance issues and blank iTunes Store - Apple Support
Cheers,
Alex H.

Adobe Premier Elements 12 Installation fail at Shared Technologies

Install continually fairls at shared technologies installation.. use of adobe support adviser did not find any issues... installed in bundle with photoshop elements and neither editing software works but the organizer works...any ideas? Oh and all installation attempts with adobe application manager fail almost instantly too! On windows 7 64 bit

Twizzler360
That shared technologies issue has a long history with variable fixes. What works for some does not for another. It hits various versions of Premiere Elements and different computer operating systems.
This long thread will get you an idea of the history and home remedies.
http://forums.adobe.com/message/4950564
What worked for me was installation disc with an external DVD burner and USB 3 computer port for Photoshop Elements 10/Premiere Elements 10 and Photoshop Elements 11/Premiere Elements 11 on Windows 8 64 bit.
You can review the different approaches. But, I suspect that the key is to keep trying. Deactivate (if you got that far), uninstall, ccleaner run through, reinstall. Just when you are about ready to give up, it installs. (very non technical view).
Please let us know the outcome.
Thanks.
ATR

Install of PSE9 starts rolling back at shared technologies, and doesn't install at all

I am trying to install PSE9 on a small laptop which doesn't have a CD/DVD ROM Reader/Writer. So I copied the program to a pendrive and it appears to have the whole program on it. It goes through the first part of the install just fine and the icon appears on the desktop. It gets to "installing required shared technologies" and the next action shows "rolling back the installation of PSE9". At this time the PSE9 icon on the desktop, disappears, and the next heading says "rolling back the installation of PSE9 Organizer" Then the window comes up which says install shield wizard completed and, "the wizard was interrupted before PSE9 could be completely installed...below mentioned application has failed to install: SHARED TECHNOLOGIES. then I click on finish and there's nothing left of the install anywhere in the computer. This is frustrating and I'm sure that somethinbg gets left out when I download the program to the pendrive but I don't have any other way to do it unless it could be installed directly from Adobe. Can I do that?

first, make sure you have a complete installer:
if you follow all 7 steps, you can download the pse trial: http://prodesigntools.com/photoshop-elements-9-premiere-elements-9-direct-download-links.h tml
use your serial to activate.
if you have dl problem, you didn't follow all 7 steps.

Please try installing again....errors installing OS X

I have erased my hard drive. I am using the original OS X discs to boot and install.
No matter the choices I make the process gets to "Install" on the listing on the right of the installer window....then it dumps:
"There were errors installing the software" (reports along the top just under the title bar)
"Please try installing again." (reported in the window)
I am completely stuck. PLEASE HELP!

1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the Erase tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Highlight the drive, select Partition Tab, then Format type... MacOS Extended Journalled, select the Security Options button, choose Zero Out Data, Erase... after completion hopefully you'll be able to install.
How to format your disks...
http://www.kenstone.net/fcphomepage/partitioningtiger.html
(To Install OSX on an IntelMac the Drive it needs the GUID Partitioning scheme mentioned at the bottom.)
Thanks to Pondini, Formatting, Partitioning, Verifying, and Repairing Disks...
http://web.me.com/pondini/AppleTips/DU.html

Attempt to reinstall PSE 11 stalled by problems with Shared Technologies

I am attempting to reinstall my copy of PSE 11. I get about half-way through the installation and I get a popup that says:
The installation process has encountered an error while installing Shared Technologies.
Please restart your system and try again.
It has happened twice. What is Shared Technologies and why isn't it working?
I'm using Win7.
John in Houston

Please uninstall all instances (any residue left) of PSE first using CS Cleaner tool (http://www.adobe.com/support/contact/cscleanertool.html)
Then restart your machine and try installing afresh. You should ideally not see this issue again.
Thanks
Andaleeb

Elements 11, will not reinstall, shared technology issue.

Elevents 11, will not reinstall, shared technology issue.

Hi oktc1633,
Also, try steps mentioned in given link:- Install rollback and Shared Technologies | Windows
Looking forward for your support.
Regards,
Sarika

When installing Elements 12 I get the Shared Technologies error

I have tried every solution suggested online and it still won't install. I an running Windows 7.

As suggested in the original reply in January, you will find best advice over on the video forum. Most of us here are photographers.
Click on the link below and copy and paste your question again. Good luck.
Video questions: Click here for Premiere Elements Forum

When attempting to install trial elements 11get amessage error installing shared technologies

Similar Messages

Maybe you are looking for