When attempting to print Solution Center opens and says 'printer is off-line'.
The printer prints a test page OK when I go to Control Panel, Preperties, Print Test Page. Surely this requires the printer to be on line.
hi there,
could you provide the community with a little more information to help narrow troubleshooting? Things like your printer model and your operating system help out a lot.
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.
Similar Messages
-
I am running LR 4.4 on a iMac with OS X (Yosemite). Everything works in the develop module but when i get to the print module, clicl on print and the apple print dialogue box opens, and I click onn print there, the app closes. It has now happened about a dozen times. I have downloaded LR 4.4 from the internet but the problem continues.
Very Important, how much Free Space is on your Hard Drive first of all? Click on the Macintosh HD on the Desktop, then do a Get Info on it.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Do they launch OK while in Safe Mode? -
HPD110a - HP Solution Center does not find printer
Changed internet service provider.
Now my printer has new IP address.
By opening my browser to the new address, I am able to scan
Also able to print from Windows 8.1/64 with the printer installed.
But,
Cannot scan from printer using the "Scan to PC" button.
Also cannot use HP Solution Center or HP AiO Printer Remote,
because they cannot find the printer. They seem to be stuck on a previous IP address.
I dont find a way to change the printer IP address in these tools.
The scan command issued from browser with the IP address does not enable me to scan more than 1 page at a time
(ie does not handle multi page docs)
Very inconvenient.
Please help
PS All software is up to dateHi @herozero , and welcome to the HP Forums!
I see you're experiencing connectivity issues. I would like to try and assist.
I would recommend performing a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would also suggest downloading and running the HP Print and Scan Doctor.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green. -
Hp solution center opens then closes
keep getting message: an outgoing call cannot be made since the application is dispatching an input-synchronous call
Hello Daapsr,
You can try this
1. Press the Ctrl , Alt , and Delete keys at the same time to open Task Manager.
2. Click the Processes tab.
3. Click the hpqgalry process, and then click End Task to end the process.
Try opening the solution center now.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution" -
When I have the downloads window open and I close the browser window, the next time I reopen the browser while the downloads are still going, it returns me to the last page I was on. All previous versions of Firefox would return me to my homepage which I would prefer. Please let me know if this is possible.
When you re-open Firefox and choose Restore Session, by default it picks up your most-recently-open window, and the other windows should then show up in Recently Closed Windows.
The Firefox add-on Session Manager lets you manage how many closed windows and closed tabs are saved, in case it's not enough. -
Aperture wont open and says "repairing library database" even when 100% complete it still wont open
my aperture won't open and says "repairing library database" even when it gets up to 100% complete it just suts there frozen and won't open to the aperture screen
How many Images? How much storage space does the Library occupy? Do you have plenty of free space on your system drive?
Ignore the progress bar — it's often stuck, and therefore unreliable.
Ignore Activity Monitor reporting Aperture "Not Responding". This is, imho, a bug Apple should have squashed years ago.
Repairing (or doing any operations an entire Library) a large Library can take hours or days. You did not report what you did to get past 79% — I'm going to guess you Force-quit Aperture. Force-quitting any database is always a bad idea and should only be done as a last resort. Each time you force quit, you are likely adding to your problem.
Restart the rebuild, and let it run, unmolested, for at least 40 hours. IME, at some point the progress bar with jump to 99%, then 100%, and then stay there for perhaps a few more hours, and then it finishes.
I have _never_ had a repair or a rebuild (I have not had to do many rebuilds) _not_ finish. One took about 82 hours, but it finished.
If your Library is small — say, fewer than 100,000 Images _and_ smaller than 100 GB — and you're seeing these very long rebuild times, you likely have an actual problem — but the only way I know to find out is to let the rebuild continue. (I don't store any but small video in Aperture, and very few of them, so my numbers may not correspond to Libraries that store videos.)
Did you notice any other problems before Aperture itself recommended rebuilding?
In short: let it run unmolested. -
When i updated my computer, my safari on applications wont open and says "safari quit unexpectedly" and wont open but when i open it on the application key on the mac, safari will open. how do i get safari back on my dock where it will open. when i click reopen it wont. but i know safari works because thats what im using right now. it just wont open when i click the one i had loaded on my dock and in applications. please help!
StephanieDrag the Safari icon straight up and off the Dock so it goes, "poof" ...
Now click and hold the Safari app in the Applications folder and drag that to the Dock.
See if you can open a webpage in Safari. -
when I connect my iPhone, iPhoto opens and the phone begins charging but iTunes does not recognize it and I cannot sync. Any advice?
Howdy AndieKanaras,
It sounds like your iPhone is being recognized everywhere but in iTunes. I would use the troubleshooting for that issue in the following article, named:
If you don't see your connected device in iTunes for Mac
Thank you for using Apple Support Communities.
All the very best,
Sterling -
I updated my iPhone 3GS on iOS 5.1 everything is ok but when I tap a message in notification area a SMS error comes "This URL wasn't loaded: sms:/open?groupid=1." and when i tap on messages app open and then close certainly... Please anyone helpe me......
Forgot to mention I live in Peru Southamerica, the cell provider is Claro (America Moviles).
-
When I start up the computer, the dialogue box opens and saying that the procedure entry point splite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. I tried to fix this problem by redownloading itunes, but the problem still persists. How can I fix it? thank you.
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "SQLite3.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck -
When I start up the computer, the dialogue box opens and saying that the procedure entry point splite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. I tried to fix this problem by redownloading itunes, but the problem still persists. How can I fix it? thank you.
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "SQLite3.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck -
I am trying to debug the jQuery to a micro site I've created and I am unable to open the Error Console when I have two Firefox windows open and I am unable to open a second Firefox window when I have the Error Console open.
I am using Mac OS X 10.6.7 and I am using Firefox 4.0.1I personally haven't experienced much of the "reverberation/feedback" when using a headset on the i4S...
Yes, I have near-perfect hearing too (for scope, squeaky brakes hurt my ears) I come from many conversations on many phones and types and first off, CDMA technology is great for coverage, terrible for voice quality. HD Voice in Europe made for some of the best phone conversations I've ever had.
Back on track, feedback is most noticable (similar to the landline phone) when using the iPhone without a headset, but for me it's not an absolute criticality mainly because I use VoIP apps alot, so maybe it has desensitized me some over the past year.
But whenever I'm on a call, and the other person has me on speakerphone, I have alot of trouble talking because of the feedback loop caused. So the less of my voice I hear the better I can talk.
Have you tried a bluetooth headset yet? -
by mistake i ereased my mackbook pro's disk. and when is restared it recovery page opened. and i did not purchase the osx mountain lion. do i have any other way to recory it without purchasing the copy of osx. ?can i do it using a usb having image file of mountain lion?
Did you buy your machine second-hand? That's really the only way you would have to purchase OS X 10.8.x from the App Store... but, yes, if you have a USB thumb drive with a bootable installer (such as made with Lion DiskMaker) you can boot from that and reinstall OS X.
Clinton -
my project is finish with final cut 4 when i export via quick time a window open and says (error 34 ) what is the problem .
i've made many transfers before and every time it was excellent thanks denisIs the external formatted tmac OS Extended?
It should be.
Al -
When using spotlight, the preview window opens and refuses to close
The spotlight preview window won't close. It just sits on top of anything else that you have open. It is a massive pain, particularly when i have about 50 windows open and have to restart the computer to remove it. Any suggestions?
Closing apps doesn't help (Until i close everything and restart the computer). It seems to be stuck to a space. Because when i shift spaces, it stays there. Next time i might try deleting the space and see what happens.
Spotlight is not indexing, it's just open. Unofrtunately i forgot to take a screenshot of activity monitor, but i took some of what the problem looks like:
Maybe you are looking for
-
Hello gurus, I am using BI 7.0 BEx Analyzer and I have some problems in inserting picture and company logos in a workbook. In particular I am using Excel 2003 and the release 2004 of the gui with support package 9 and patch 4. When I try to copy and
-
Multi-page Tiff attachments and iPad
Hello, I like very much The ipad,and i use IT everywere is possible:from browsing The web to writing emails,from playing games to listening to music. But there's a big problem:i can't read multi-page tiff that I use very much within my enterprise. I
-
Hi I have a question regarding peer-switch konfiguration on a vPC/vPC+ pair of N7K with vPC and non vPC attached switches If I understood correctly with following configuration for vPC attached switches (assuming the have default STP-prio) the vPC-bu
-
How can I upload pdf documents to icloud?
-
Settelment of shipment cost to invoice (F2)
Hi Gurus, I have a n issue, I want to add transportation cost in billing doc. i.e The shipment cost calculated in VI01 doc , I want to add that cost to my invoice. So i can charge that transportation cost to my customer through invoice. Please help