When backing up on time machine is get " The back up disk image'/volume/data/eric balnchard's Macbook.sparbundle"could not be accessed (error-1). what does it mean? it's a new time machine
when backing up on time machine is get " The back up disk image'/volume/data/eric balnchard's Macbook.sparbundle"could not be accessed (error-1). what does it mean? it's a new time machine
Expect to see this error again due to a bug in Lion (and Mountain Lion).
See # C17 in Pondini's excellent support document below, or look over to the right of this web page under the heading of More Like This
http://pondini.org/TM/Troubleshooting.html
Similar Messages
-
While backing up to Time Machine, I receive this message: time machine error says: The backup disk image “/Volumes/Data/Apple ’s iMac G5.sparsebundle” could not be accessed (error -1).
Welcome to Apple Support Communities
That message is caused by several reasons. Read the Pondini's site to fix the problem > http://pondini.org/TM/C17.html -
I've been having the same problem that my Time Machine can't be back up to my iMac for last few months. It said," The backup disk image... sparsebundle" cannot be acessed -(error 1) . When i looked into my TC, it does connected to my iMac; but not in devices and when i clicked into imac.sparsebundle and it is no mounted file system.
I tried several changes such as new password, new device names, checked Keychain Acess, repaired the disk, got a latest air utilily... But it still couldn't help alot. my iMac software now is OSX Mountain Lion 10.8.4. However, it having the problem since i update the software... I'm not sure if it related but i'm clueless now!!!
I need help for this annoying issue!!Welcome to Apple Support Communities
That message is caused by several reasons. Read the Pondini's site to fix the problem > http://pondini.org/TM/C17.html -
Having difficulty backing onto my time capsulse and keep getting this error message.
Can anyone Help please??Please visit Pondini's Time Machine FAQ for help with all things Time Machine.
-
HT3275 the back up disk image could not be created (error 30) what does that mean?
I have a error message poping up stating time machine couldnt complete backup to GOFLEXHOME. The backup disk image could not be created (error 30)
For all things Time Machine see Pondini’s excellent Information Here...
http://pondini.org/TM/Troubleshooting.htm -
Message from my time capsule"The backup disk image"/volumes/data/bob mertie's imacsparse bundle could not be accessed" Any help?
Welcome to Apple Support Communities
There are different reasons for that error. Read > http://pondini.org/TM/C17.html -
MacPro backed up to Time Machine, added Mac Mini now get "The backup disk image “/Volumes/Data/Jerry Booher’s MacBook Pro.sparsebundle” is already in use." error when Mac Pro tries to back up
It is standard Mountain Lion error due to the networking ability which is comparable to wet string. (actually that was lion.. it dried out some with Mountain Lion.. higher in the hills perhaps!!)
See C12 and C17
http://pondini.org/TM/Troubleshooting.html
But many people are suffering the same issue..
And the above is even a little out of date.. you might need to do a reset to the TC.
Welcome to Apple's beta program for everyone. -
My time machine does not back up and giving me this error message: The backup disk image “/Volumes/Data-1/Amiel’s MacBook Pro.sparsebundle” is already in use. Pls help.
Make sure that there are no other Macs backing up at the present time.
Pull the power cord from the back of the Time Capsule
Count to ten
Plug the power cord back in
This will "fix" things about 98% of the time. Post back if you are in the unlucky 2% category. -
i am running 10.7.5 on an older MacBook and getting Time Machine error The backup disk image “/Volumes/Data/Kathy P’s MacBook.sparsebundle” is already in use. what do i do now?
See Pondini's TM FAQs, for starters.
-
Since upgrading my Macbook to Lion, the time machine backups are failing - error message: "The backup disk image “/Volumes/Jackie Scanlon's Time Caps/Jacqueline Drabczynska’s MacBook.sparsebundle” could not be accessed (error -1)." I have rebooted the TIme Capsule and it worked OK, but don't want to do that every time. Any suggestions? Thanks
Any new info on this?
I had the exact same problem and went crazy and spent a hecka lot of time trying to deal with my brand new 2TB Time Capsule and almost brand new MacBook Pro. Then I thought I fixed it...and I tried SO MANY things, I don't really know what did it...except taking out any apostrophe's in names of stuff that Apple puts in there...BUT...now it's back.
Grrr... -
I can select a disk (Time Capsule) and initiate the backup. It only "waits to back up" then "making backup disk available" and remains frozen there. I tried to update the software a while back and was unsuccessful, I think that may be the issue.
Any insight would be greatly appreciated. This is the error message I receive.
TIME MACHINE ERROR: The backup disk image “/Volumes/Data/Sean McGuire’s MacBook Pro.sparsebundle” could not be created (error 1).
ThanksSee #C17 in Pondini's excellent support document Time Machine - Troubleshooting
http://pondini.org/TM/Troubleshooting.html -
I get an error message when running a back-up from my Macbook Pro: The backup disk image Macbook.sparsebundle could not be accessed (error-1) and the backup did not complete? What is the issue?
Try Here > http://pondini.org/TM/C12.html
More Info here > http://pondini.org/TM/Time_Capsule.html -
When I try to enter a new calendar entry I get the following message: "This calendar was created by mail, you can't add events to a mail calendar" what does it mean? I never had this message before.
Check which calendar you are trying it put this event on, then put it on the correct one.
-
I noticed today that my last back-up was this a.m. and it has tried several times to back up since but I keep getting this message
Time Machine couldn’t complete the backup to “TimeCap”.
The backup disk image “/Volumes/Data/ MacBook Pro ."sparsebundle” is already in use.
I have never had this problem before and don't know what to do. I am not that great around computers so if anyone can help I would appreciate it. I did try to do some research but could not understand any of the content I read. I sure don't know what "sparsebundle" is and this is the first time I ever heard the term.
If anyone can help woold appreciate it.
I have Version 10.9.1This is a standard issue..
Been around since LION but you missed out.. !! Well the old rule applies.. there are three types of Mac users.
1. The bugs have bitten you, and you have done the work arounds.
2. The bugs are biting you and you are now trying to find out what is going on.
3. The bugs will bite you. And in the meantime you laugh at everyone with problems and say it must be all their fault. Doesn't happen to my system.
You were simply in the last group.. now, with the wonders of mavericks to help, you got bit.
The solution is simple.. unplug the power cord from the TC .. count to 10.. power up the TC again.
No luck look at the more technical help.
C12 here. http://pondini.org/TM/Troubleshooting.html
Your naming might also be an issue if this continues to happen.. see C9. -
When my time capsule tries to perform a back-up - i get the following error message.
The backup disk image "/volumes/data/myname's iMac.sparsebundle" could not be acccessed (error-1).
Is this something that can be resolved or is time capsule dead?Welcome to Apple Support Communities
That error is caused by different reasons. Have a look at this Pondini's page > http://pondini.org/TM/C17.html
Maybe you are looking for
-
http://aur.archlinux.org/packages.php?ID=6232 i have been following the install instructions as follows, http://wiki.archlinux.org/index.php/AUR - om_the_AUR but i cant get it to install, i cant even find th .tar.gz file in the tarbell provided, what
-
Installation of 20120110 Firmware on Color Laserjet CP1518ni Fails
I'm trying to install the version 20120110 Firmware update using the Mac OS X installer, but the install always fails. Instead, the printer prints a page with the following text: "--=/Begin UP Signed File Fingerprint\>=-- Fingerprint Length: 000527
-
Unix:Using OCI with C++ on Solarus 8
I am using the FORTE C++ compiler on UNIX Solarus 8. I am looking for the UNIX C/C++ OCI libraries to build Server and Client components to interact with an Oracle database. Please direct me to a URL where I can find the OCI libraries and header file
-
Programmatically get the PXI slot that the PXI-4070 (DMM) is in?
I am looking for a way to find out what slot my DMM's are in and their model and S/N. So far I have been able to get back the info for NI-Switch devices, DAQs and a range of Pickering Cards. For the NI-DMM's I have so far only been able to get the S/
-
How do I make the text in a List cell wrapover?
The problem with the code below is that TextFormt does not support wordWrap which is supported by TextField(which, unfortunately has no effect on a List component). var lb = new TextFormat(); lb.bold = true; lb.align = TextFieldAutoSize.