When batching Save for Web, Illustrator also saves copy of .ai file
This question was asked and abonadoned here, so I'm posting because it's also happening to me.
CS4 & CS5 (I tried both), Mac OS 10.6
1. I select the "Save for Web PNG" action, which is part of the default set, and select "Batch."
2. I choose a source folder and choose a destination folder, and check "Override Action 'Save' Commands."
3. Illustrator then performs the Save for Web action, but puts the .png files in the original destination specified in the action. It also puts copies of the .ai files in the destination folder I created and specified in the Batch dialog box.
I want the .png files in my folder, and I don't want copies of the .ai files.
Pulling my hair out on this one, going to lunch. Thanks in advance for any help
Ah, ok. That worked, for the most part. When I used "Folder" as the destination, my jpegs were saved to that folder, but I also got the .ai copies again. Argh. It was only when I chose "Save and Close" as the destination that I got just the jpegs.
So "Save for Web" is actually a type of export, rather than a save. It's confusing, since the action is called "Save for Web…" Plus, the batch works — in the original way I set it up — with a regular Save command.
btw, the top section only goes gray when "Save & Close" is selcted (see screen shot). Thanks for your help.
Similar Messages
-
"Save For Web" not remembering save folder
Hi Guys,
I'm using the save for web function to save a large number of files (not batch saving).
Usually, when I open a file and start saving for web, it will remember the folder that I most recently exported to, and by default open that folder for that file, until I "save for web" into a different folder.
Out of seemingly nowhere, the save for web seemed to "forget" this folder (and any other folder I tried to save to), and now defaults to the "Documents" folder, causeing me have to click through to find my intended destination folder.
Any ideas? Google was not a help on this one, I can't seem to find anyone with a similar issue.
I'm on CS5 & Mac running Mountain Lion. On my work computer (exactly the same, Mac + Mountain Lion) I am using CS6 and have not encountered this issue.
- CaitlinCaitlin,
You may try the following (you may have tried/done some of them already) and see whether it helps (the following is a general list of things you may try when the issue is not in a specific file; 3) and 4) are specifically aimed at possibly corrupt preferences):
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy);
If nothing else helps, even more seriously, you may:
6) Uninstall, run the Cleaner Tool, and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html -
PSE6 Mac OS - Save For Web won't save JPEG high res setting in Preset
Why is it that, contrary to documentation, Save For Web won't remember that I always select JPEG High for every photo file I save? Each time, it comes up as "Custom" Low quality, and can't even remember that I want JPEG format. My reliable old copy of PSE 2 that I've used happily for six years was capable of remembering what I wanted out of Save For Web. There are always surprises with new Adobe versions, I just wish there were some good ones once in a while...
I tried on my mac machine with PSE 6 and saved one file as PNG-24 and some settings. I saved the file.
next time when i opened any other image and tried using save for web, the previous settings were remembered.
So, i m not sure if the issue you facing is common to all. -
CS5.5 Photoshop Save For Web Error - "cannot be performed on a file with a user-mapped section open"
I have just started getting this error when I try to "Save for web". I can still do File > Save As... with no problem. Does anybody know what might be causing this?
Hi jonesri,
I think you can try to use SSAS Dynamic Management View to monitor SSAS instance, such as existing connections and sessions. For example, please run the following MDX query:
SELECT[SESSION_COMMAND_COUNT],
[SESSION_CONNECTION_ID],
[SESSION_CPU_TIME_MS],
[SESSION_CURRENT_DATABASE],
[SESSION_ELAPSED_TIME_MS],
[SESSION_ID],
[SESSION_IDLE_TIME_MS],
[SESSION_LAST_COMMAND],
[SESSION_LAST_COMMAND_CPU_TIME_MS],
[SESSION_LAST_COMMAND_ELAPSED_TIME_MS],
[SESSION_LAST_COMMAND_END_TIME],
[SESSION_LAST_COMMAND_START_TIME],
[SESSION_PROPERTIES],[SESSION_READ_KB],
[SESSION_READS],[SESSION_SPID],
[SESSION_START_TIME],[SESSION_STATUS],
[SESSION_USED_MEMORY],
[SESSION_USER_NAME],
[SESSION_WRITE_KB],
[SESSION_WRITES]
FROM $SYSTEM.DISCOVER_SESSIONS
Use Dynamic Management Views (DMVs) to Monitor Analysis Services:
http://msdn.microsoft.com/en-us/library/hh230820.aspx
In addition, you can aslo use SQL Profiler to capture some events for further investigation.
Use SQL Server Profiler to Monitor Analysis Services:
http://technet.microsoft.com/en-us/library/ms174946.aspx
If you have any feedback on our support, please click
here.
Regards,
Regards,
Elvis Long
TechNet Community Support -
Save for web won't save in CS5
So, save for web worked perfectly when I installed CS5, until a couple of days ago, when I clicked the save-button in the save for web window and got this message: "Could not complete this operation. An unknown operating system error has occurred."
It makes no sense and I've tried basically everything I can think of that could help:
Restarting
Deleting settings for save for web
Reinstalling the whole CS5 package (and removing settings)
Repairing disk permissions
Cleaning up stuff with OnyX
Shutting down all other applications and running photoshop alone
None of those things did anything and I'm pretty much stuck. Any ideas?Ok, now it seems to work of some reason. I have no idea whatsoever as to why.
Edit: Wait, it works on certain files, and on others it doesn't. It won't work if I create a blank file and try saving, but it worked on a specific file. Makes no sense.
Edit2: and NOW it seems to work on all files. Damn, I'm confused. -
How to "save for web" via batch processing in Photoshop elements
I have a bunch of logos that need to be resized and 'save for web." How can I process these files as a batch in Photoshop elements. Many thanks!
You can batch save them as jpgs, gifs, or PNGs using Process Multiple Files, and even batch resize them as long as they are all in the same orientation and the same aspect ratio (shape), but the resulting files will be somewhat larger than you'd get with Save for Web because Save for Web removes the photos' exif data, which PMF won't. Since these are logos, there shouldn't be much difference.
-
CS5 Crop marks don't work in Save For Web
I'm playing in the trial version of Illustrator 5.
I'm having trouble figuring out the crop marks. I select an object and try the various versions of creating crop marks. But when I Save For Web, it does not use the crop marks as a guide to trim the artwork down. The crop marks are visible.
In CS3, which I've used for years, I would create an object and use the crop mark tool to create the marks at the size of my object. When I would Save For Web it would save the file to the exact size of my crop marks, no matter if I had artwork in clipping masks that go outside the crops.
Why does this not work in CS5?You do speak the truth so in CS 4 and now Cs 5 you instead of drawing a rectangle and the making it into crop marks you simply draw an artboard then when you export you select to use artboards in the export dialog and select the artboard you just made and voilá.
Now before you go crazy this is an advance you can also choose to export all the artboards a range of artboards or a non-contiguous selection of artboards this way.
the difference here is that you draw the artborad which is actually drawing a rectangle and making the crop marks as in the CS 3 all in one opertation
it is really the same feature with lots of features added to it. Including the ability to name the art boards (cropped areas) number them reorder them
manage them in the artboard panel and then the team went farther than that with pasting in place pasting an element on all the artboards at once.
It is really just the crop area feature but with lots of possibilities.
If you need t draw an artboard within another artboard hold down the shift key. -
Save For Web transparency problem: Overprint & CMYK documents
OK, I had a weird problem crop up today (as far as I can tell) completely out of the blue.
When I am working in overprint preview mode in a CMYK document, and I attempt to save an artboard as a PNG w/ transparency (via Save for Web), illustrator forces a white background throughout the image. It didn't do this until this morning. Yesterday, it was working perfectly normally. I put the computer to sleep at the end of the day, woke it up this morning, and for some reason this behavior has changed.
It does not do this if the document is in RGB mode, or I have the transparency grid shown, or not in overprint preview mode. (I work in this mode because for some reason having it in standard preview shows very strange artifacts when working with raster effects, which drives me crazy)
I'm on a Mid 2014 MBP Retina, 2.5 GHz Intel Core i7, 16GB 1600MHz DDR3 w/ NVIDIA GeForce GT 750M 2048MB, running illustrator CC 2014.1.1.
I have tried uninstalling, reinstalling, restarting the computer, resetting all settings, as well as changing document settings, and editing artboard settings. And yes, the transparency checkbox is checked in the Save For Web dialog.
Any ideas?brnscreative,
Have you tried 4) and 6) on the list?
4) is more thorough than 3), and 6) is the full reinstallation.
The following is a general list of things you may try when the issue is not in a specific file, and when it is not caused by issues with opening a file from external media. You may have tried/done some of them already; 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save current artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to at least 5 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible), for CS3 - CC you may find the folder here:
https://helpx.adobe.com/illustrator/kb/preference-file-location-illustrator.html
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall (ticking the box to delete the preferences), run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html -
A different take on the "Save For Web" color shift issue...
Ok, everyone who has fussed much with photoshop and "Save For Web" knows about the color shift issue. If you want your colors to look right after you "save for web", you have to work in the sRGB colorspace, and have Proof Colors checked (soft proofing on) and the proof color setup set to Monitor RGB, otherwise what you get looks terrible when displayed in a browser.
But of course if you are editing for print, this is exactly what you DON'T want to do. Well, I work in both. In fact, often the same images, and I want them to appear as close as reasonably possible in both print and web formats, and without a lot of fussing on my part. And I'm pickiest about the print mode, since I have the most control there, so that's the way I want to edit by default.
Nothing new here.
Now comes the interesting part (in my mind, anyway). Obviously there is a known remapping -- because PhotoShop DOES it when you select Proof Colors. So the inverse mapping must also be known (with some gamut issues, but I'm not concerned with those, because, after all, I'm VIEWING it on a monitor anyway!). What I want is a plug-in that automatically applies that inverse mapping so that, when I do a Save For Web, I end up with the colors I've been viewing all the time when setting the shot up in print mode. Then, too, I don't have to worry about what mode I'm in when I'm editing -- it just fixes it when doing a save-for-web.
Again, I want to edit in my normal print mode (typically ProPhoto colorspace, and with soft-proofing off or set to the printer/medium combination I expect to use), then do a single operation (might be a multi-step action) to "screw up" my colors so that when I then do a "Save-For-Web", the resulting image, when viewed on the average color-stupid browser, looks like the image I've been seeing in Photoshop.
Anyone know of such a beast? I would gladly pay for a plug-in that really works and fixes the problem.
And if you have other solutions, I'm interested, but the absolute requirement is that it I do one single edit pass for my colors for both print and web use, and I get what I see on the screen in PS on both the prints and on the web display (i.e., working in sRGB/Monitor RGB mode all the time won't cut it). And PREFERABLY, let me do all my editing work in the ProPhoto (or at least AdobeRGB) colorspace so I have a gamut closer to what the printer can do.
Anyone got a decent solution for this?Sorry, I think I'm being unclear. This has nothing to do with individual monitor profiles. In Proof Setup, "Monitor RGB" amounts to turning off ALL color management, and simply letting the monitor do what it will. It is what the vast majority of web browsers do (even if the operating system provides color management, the browsers don't take advantage of it), so that is what you need to consider for images that will be viewed on a web browser. If you convert your image to sRGB, select Monitor RGB in Proof Set up, and turn on Proof Colors, you will see the image as it would appear on a web browser (after you save it as a jpg or use "Save For Web/Devices" to save it as a jpg). Since almost everyone is running different uncalibrated monitors, there will be lots of variation in how it will look to them, so precise control of the color is unimportant.
That said, I would expect the color on a calibrated monitor (such as the one I use when editing) to be reasonably close to the colors I am seeing while editing in PS. To the extent a monitor deviates from "calibrated", those colors will vary, but a good monitor should show good colors. Unfortunately, this is NOT the case, as my previous post shows. The colors produced by the steps above are oversaturated and significantly shifted in hue. There is, to my mind, anyway, no reason for this. Adobe clearly knows what the mapping is between the colors as it displays them in PS and the un-controlled "Monitor RGB" -- that is, it is the color map they are using during normal editing display. If they were to reverse-apply that map prior to saving it as a jpg, then the image would appear on a browser on that same (presumably calibrated) monitor very similar to what you set up when editing. Anyone else viewing the image on a web browser with a calibrated monitor would also see good colors. To the extent other viewers' monitors are out of calibration, their colors will suck, but there's nothing you can do about that.
I guess in some sense I AM "asking for a Color-Mamangement-solution for a "non-Color-Management-situation", but specifically I'm asking for PS Color Management to do the best it can for non-Color-Managed situations that we all face every day.
Does that make more sense? -
Hi all, the old post was http://forums.adobe.com/thread/662903
The Include Metadata option in Save For Web... saves the info found in File > File Info with the image. No resolution data.
This has zero effect on the image. Image resolution only affects printing the image. For viewing on the web, all that matters is height x depth measured in pixels.
Save For Web strips all resolution data from the file. The file simply doesn't have a resolution out of SFW.
The 72 ppi or whatever appears when you reopen into Photoshop, because Photoshop needs some resolution figure and therefore assigns 72 purely as a default value.
I have to save some images for my DPS workflow with 72ppi and the same also 108ppi.
I save the first using Save for Web and i think that is correct.
The problem is the 108ppi output - how is the best workflow to this? Can i use Save for Web? I think no!
I understand that Save for Web do not save 72ppi or any other ppi size...Think what you are quoting is what I have read also. Not sure why they would specify 72 and 108 ppi. That is just the pixels per inch of the display. Perhaps they want a larger image on the website. This could be acomplished by making the pixel size larger, without resampling. At least that is the way I see it, but could be wrong.
Take an image and open image/image size and play with the ppi with resampling off to check this out. -
Using QuickTime Player's 'Save for Web' feature in iWeb
I'm using iWeb (3.0.3) to create a site. I've also used the QuickTime Player (10) feature "Save for Web" command to save optimized versions (for iPhone and desktop) of a clip I'm using in my site. I want to keep the nice features of the QT Save for Web, i.e., the poster frame and the nicer QT controller.
I've managed to get everything hooked up right (using an HTML snippet in iWeb and hand-editing the page's html file to add the lines to <head> that the Save for Web's instructions specify. Yay!
All good so far. When I view the page in Safari, the poster frame shows up perfectly. But when I click on it, Safari swaps in a new page (frameset?), which loses all the navigational stuff I have on the "real" page. The Save for Web's instruction html page doesn't do this -- why is it happening in the iWeb page? I've tried stripping stuff out of the iWeb-generated page, but no luck.
Please help ... I've spent HOURS trying to figure this out, and I'm at my wit's end!!
(Additionally, if someone can tell me where I can put the 4 files that the Save for Web command creates so that iWeb doesn't wipe them everytime I publish, I would be a very happy man!!This demo page has instructions on how to use that feature: #18 - Adding Movie/Video File to iWeb Page via Export for Web in Quicktime Player.
This demo page has an example of how it looks: Using a Movie Exported Out of Quicktime Player via “Export for Web”
OT -
PS CS6 action save for web error
In Photoshop CS6 actions when we save the image as JPEG through save for web it doesn't work when we run it, instead it runs and saves the image as HTML, i guess some error in it. I tried it again and again but it doesn't remember my save for web settings and saves the images as HTML.
It a new bug in CS6 though when you recorded the action you saved jpeg images to you desktop and you only entered file names onto the save for web action steps the action recorder recorded name.html. I replaced you save for web steps on my machine for my desktop and CS6 recorded name.html. I then did the same with CS5 though I only entered names CS5 recorded name.jpg.
If you expand the export steps tou will see the hard coded file names and extention
An action like this will always save the same files it can not be batch because you recorded Path and Names in the save for web steps. The .html files saved on with CS6 are actually jpeg files and if you rename them hrom name.html to name.jpg you can use them,
Set: cropping
Action: story sizes
Levels
Preset Kind: Custom
Adjustment: levels adjustment list
levels adjustment
Channel: composite channel
Input: 0, 245
Gamma: 1.14
Image Size
Width: 660 pixels
With Scale Styles
With Constrain Proportions
Interpolation: bicubic automatic
Export
Using: Save for Web
Operation: Save
true
In: C:\Users\venkatr\Desktop\
Custom File Name: “_660.html” <----CS6 problem recording - CS5 records "_660.jpg on my machine
Format: JPEG
Without Interlaced
Quality: 55
0
Quality Modification Channel Strength: 0
Without Quality Channel Text Layers
Without Quality Channel Vector Layers
With Optimized
Number Of Passes: 3
Blur: 0
Without Embed ICC Profile
With Matte
Matte Color Red: 255
Matte Color Green: 255
Matte Color Blue: 255
Without Save HTML File
With Save Image Files
Slices: All Slices
Color Handling: Convert to sRGB
Metadata: None
Without Output XHTML
With Include Comments
With Always Add Alt Attribute
With Always Quote Attributes
Without Close All Tags
With Include Zero Margins on Body Tag
HTML Tags Case: Lowercase
HTML Attribute Case: Lowercase
HTML Indent: -1
HTML Line Endings: Automatic
<unknown>
Without Generate CSS
Empty Cells: GIF, IMG WH
TD WH: Auto
Vertical Spacer Cells: Auto (Bottom/Right)
Horizontal Spacer Cells: Auto (Bottom/Right)
Slice Name Components: Filename Component list
Filename Component
Filename Component Type: doc. name
Filename Component
Filename Component Type: underscore
Filename Component
Filename Component Type: layer name or slice no.
Filename Component
Filename Component Type: none
Filename Component
Filename Component Type: none
Filename Component
Filename Component Type: none
Without View As Background
Background Image Path: “”
Background Color Type: Matte
File Name Components: Filename Component list
Filename Component
Filename Component Type: slice name
Filename Component
Filename Component Type: hyphen
Filename Component
Filename Component Type: trigger name
Filename Component
Filename Component Type: underscore
Filename Component
Filename Component Type: rollover state
Filename Component
Filename Component Type: none
...3 More
Without Mac OS 9 Filename Compatibility
With Windows Filename Compatibility
With Unix Filename Compatibility
With Use Images Subfolder
With Copy Background Image when Saving
Images Subfolder Path: “images”
Select previous history state
Crop
To: rectangle
Top: 111.4 pixels
Left: 142.2 pixels
Bottom: 2342.6 pixels
Right: 3613.1 pixels
Angle: 0°
Without Delete Cropped Pixels
<unknown>
Target Width: 350 pixels
Target Height: 225 pixels
Target Resolution: 0 per inch
Export
Using: Save for Web
Operation: Save
true
In: C:\Users\venkatr\Desktop\
Custom File Name: “_350.html”
Format: JPEG
Without Interlaced
Quality: 55
0
Quality Modification Channel Strength: 0
Without Quality Channel Text Layers
Without Quality Channel Vector Layers
With Optimized
Number Of Passes: 3
Blur: 0
Without Embed ICC Profile
With Matte
Matte Color Red: 255
Matte Color Green: 255
Matte Color Blue: 255
Without Save HTML File
With Save Image Files
Slices: All Slices
Color Handling: Convert to sRGB
Metadata: None
Without Output XHTML
With Include Comments
With Always Add Alt Attribute
With Always Quote Attributes
Without Close All Tags
With Include Zero Margins on Body Tag
HTML Tags Case: Lowercase
HTML Attribute Case: Lowercase
HTML Indent: -1
HTML Line Endings: Automatic
<unknown>
Without Generate CSS
Empty Cells: GIF, IMG WH
TD WH: Auto
Vertical Spacer Cells: Auto (Bottom/Right)
Horizontal Spacer Cells: Auto (Bottom/Right)
Slice Name Components: Filename Component list
Filename Component
Filename Component Type: doc. name
Filename Component
Filename Component Type: underscore
Filename Component
Filename Component Type: layer name or slice no.
Filename Component
Filename Component Type: none
Filename Component
Filename Component Type: none
Filename Component
Filename Component Type: none
Without View As Background
Background Image Path: “”
Background Color Type: Matte
File Name Components: Filename Component list
Filename Component
Filename Component Type: slice name
Filename Component
Filename Component Type: hyphen
Filename Component
Filename Component Type: trigger name
Filename Component
Filename Component Type: underscore
Filename Component
Filename Component Type: rollover state
Filename Component
Filename Component Type: none
...3 More
Without Mac OS 9 Filename Compatibility
With Windows Filename Compatibility
With Unix Filename Compatibility
With Use Images Subfolder
With Copy Background Image when Saving
Images Subfolder Path: “images”
Select previous history state
Crop
To: rectangle
Top: 0 pixels
Left: 529.1 pixels
Bottom: 2730 pixels
Right: 2869.1 pixels
Angle: 0°
Without Delete Cropped Pixels
<unknown>
Target Width: 300 pixels
Target Height: 350 pixels
Target Resolution: 0 per inch
Export
Using: Save for Web
Operation: Save
true
In: C:\Users\venkatr\Desktop\
Custom File Name: “_300.html”
Format: JPEG
Without Interlaced
Quality: 55
0
Quality Modification Channel Strength: 0
Without Quality Channel Text Layers
Without Quality Channel Vector Layers
With Optimized
Number Of Passes: 3
Blur: 0
Without Embed ICC Profile
With Matte
Matte Color Red: 255
Matte Color Green: 255
Matte Color Blue: 255
Without Save HTML File
With Save Image Files
Slices: All Slices
Color Handling: Convert to sRGB
Metadata: None
Without Output XHTML
With Include Comments
With Always Add Alt Attribute
With Always Quote Attributes
Without Close All Tags
With Include Zero Margins on Body Tag
HTML Tags Case: Lowercase
HTML Attribute Case: Lowercase
HTML Indent: -1
HTML Line Endings: Automatic
<unknown>
Without Generate CSS
Empty Cells: GIF, IMG WH
TD WH: Auto
Vertical Spacer Cells: Auto (Bottom/Right)
Horizontal Spacer Cells: Auto (Bottom/Right)
Slice Name Components: Filename Component list
Filename Component
Filename Component Type: doc. name
Filename Component
Filename Component Type: underscore
Filename Component
Filename Component Type: layer name or slice no.
Filename Component
Filename Component Type: none
Filename Component
Filename Component Type: none
Filename Component
Filename Component Type: none
Without View As Background
Background Image Path: “”
Background Color Type: Matte
File Name Components: Filename Component list
Filename Component
Filename Component Type: slice name
Filename Component
Filename Component Type: hyphen
Filename Component
Filename Component Type: trigger name
Filename Component
Filename Component Type: underscore
Filename Component
Filename Component Type: rollover state
Filename Component
Filename Component Type: none
...3 More
Without Mac OS 9 Filename Compatibility
With Windows Filename Compatibility
With Unix Filename Compatibility
With Use Images Subfolder
With Copy Background Image when Saving
Images Subfolder Path: “images”
Select previous history state
Crop
To: rectangle
Top: 136.5 pixels
Left: 325.7 pixels
Bottom: 2359.2 pixels
Right: 3295.2 pixels
Angle: 0°
Without Delete Cropped Pixels
<unknown>
Target Width: 167 pixels
Target Height: 125 pixels
Target Resolution: 0 per inch
Export
Using: Save for Web
Operation: Save
true
In: C:\Users\venkatr\Desktop\
Custom File Name: “_167.html”
Format: JPEG
Without Interlaced
Quality: 55
0
Quality Modification Channel Strength: 0
Without Quality Channel Text Layers
Without Quality Channel Vector Layers
With Optimized
Number Of Passes: 3
Blur: 0
Without Embed ICC Profile
With Matte
Matte Color Red: 255
Matte Color Green: 255
Matte Color Blue: 255
Without Save HTML File
With Save Image Files
Slices: All Slices
Color Handling: Convert to sRGB
Metadata: None
Without Output XHTML
With Include Comments
With Always Add Alt Attribute
With Always Quote Attributes
Without Close All Tags
With Include Zero Margins on Body Tag
HTML Tags Case: Lowercase
HTML Attribute Case: Lowercase
HTML Indent: -1
HTML Line Endings: Automatic
<unknown>
Without Generate CSS
Empty Cells: GIF, IMG WH
TD WH: Auto
Vertical Spacer Cells: Auto (Bottom/Right)
Horizontal Spacer Cells: Auto (Bottom/Right)
Slice Name Components: Filename Component list
Filename Component
Filename Component Type: doc. name
Filename Component
Filename Component Type: underscore
Filename Component
Filename Component Type: layer name or slice no.
Filename Component
Filename Component Type: none
Filename Component
Filename Component Type: none
Filename Component
Filename Component Type: none
Without View As Background
Background Image Path: “”
Background Color Type: Matte
File Name Components: Filename Component list
Filename Component
Filename Component Type: slice name
Filename Component
Filename Component Type: hyphen
Filename Component
Filename Component Type: trigger name
Filename Component
Filename Component Type: underscore
Filename Component
Filename Component Type: rollover state
Filename Component
Filename Component Type: none
...3 More
Without Mac OS 9 Filename Compatibility
With Windows Filename Compatibility
With Unix Filename Compatibility
With Use Images Subfolder
With Copy Background Image when Saving
Images Subfolder Path: “images”
Select previous history state
Crop
To: rectangle
Top: 225.1 pixels
Left: 1318.4 pixels
Bottom: 1858.5 pixels
Right: 3496.2 pixels
Angle: 0°
Without Delete Cropped Pixels
<unknown>
Target Width: 88 pixels
Target Height: 66 pixels
Target Resolution: 0 per inch
Export
Using: Save for Web
Operation: Save
true
In: C:\Users\venkatr\Desktop\
Custom File Name: “_88.html”
Format: JPEG
Without Interlaced
Quality: 55
0
Quality Modification Channel Strength: 0
Without Quality Channel Text Layers
Without Quality Channel Vector Layers
With Optimized
Number Of Passes: 3
Blur: 0
Without Embed ICC Profile
With Matte
Matte Color Red: 255
Matte Color Green: 255
Matte Color Blue: 255
Without Save HTML File
With Save Image Files
Slices: All Slices
Color Handling: Convert to sRGB
Metadata: None
Without Output XHTML
With Include Comments
With Always Add Alt Attribute
With Always Quote Attributes
Without Close All Tags
With Include Zero Margins on Body Tag
HTML Tags Case: Lowercase
HTML Attribute Case: Lowercase
HTML Indent: -1
HTML Line Endings: Automatic
<unknown>
Without Generate CSS
Empty Cells: GIF, IMG WH
TD WH: Auto
Vertical Spacer Cells: Auto (Bottom/Right)
Horizontal Spacer Cells: Auto (Bottom/Right)
Slice Name Components: Filename Component list
Filename Component
Filename Component Type: doc. name
Filename Component
Filename Component Type: underscore
Filename Component
Filename Component Type: layer name or slice no.
Filename Component
Filename Component Type: none
Filename Component
Filename Component Type: none
Filename Component
Filename Component Type: none
Without View As Background
Background Image Path: “”
Background Color Type: Matte
File Name Components: Filename Component list
Filename Component
Filename Component Type: slice name
Filename Component
Filename Component Type: hyphen
Filename Component
Filename Component Type: trigger name
Filename Component
Filename Component Type: underscore
Filename Component
Filename Component Type: rollover state
Filename Component
Filename Component Type: none
...3 More
Without Mac OS 9 Filename Compatibility
With Windows Filename Compatibility
With Unix Filename Compatibility
With Use Images Subfolder
With Copy Background Image when Saving
Images Subfolder Path: “images”
Close
Saving: no -
Save for web problem for transparent gaphics
hi!
savng any transparent graphic in " save for web&.." the transparancy of original file is shown much more opaque/darker and so it will save in png file.
iattached file where you can see red box with 40% opaciy , but when opened in save for web it looks more like 60% opacity.
i found solutions of some problems for color shifting in save for web , but none of them solves my problem.
Any ideas?All is not as hopeless as it seems just a bit hidden in CS 3 and earlier in CS 4 the mystry was brought to the frnt though not really document as far as I know.
The problem is simple to correct and has a logical reason why it is manifesting itself this way.
In CS 3's Save for Device and Web there is a small triangle at the top left had corner on the image display window that offers you a choice between the default and the problem uncompressed color, Macintosh color, Windows color and Document Color Profile which is what you are looking for since that is what you expect to match.
There is also the option to convert to sRGB which what the web basically displays well. Which is located on the upper right corner of the dialog also a drop down.
I hope this helps you find your way it used to drive me a bit crazy myself till I took a really close look at the dialog. -
Dear Adobe,
This is a very serious plea to add copyright info when using the "save for web" feature. Save for Web is one of Photoshops most valuable features but without the ability to at least save copyright info many of us can not use this. Is there a reason I am missing? After what has transpired in the last 24 hours with the Orphaned Works bill, this has become 100 times more important.
Thanks
Troy
PS Photographers, please add your feelings below and write adobe if you agree.>Any user can "claim" that they had no way to find the creator of the image since their is no metadata attached to the image.
There may also be a fundamental misunderstanding of protecting images on a web page here. There are very, very, very few people that will be looking at meta data in an image for copyright. And few applications will even reveal that meta data to the user.
You can't stop someone from taking your image from your site and you can't track what they do with it. The best way that anyone can try to protect their copyright is to stamp a visible mark somewhere on the image that not only announces copyright but points the viewer to your site (ex: © 2008 Joe Photography - joephoto.com). So if someone steals your image and posts it elsewhere, other viewers will know where to find the source. The image thief may be your best marketer. -
Adobe Save for Web and Devices Error
I had a problem with Save for Web and Devices in Photoshop CS4 - and am posting the solution for anyone else that might encounter this (posted previously for Mac but not Windows). This problem suddenly occurred - and I'm not sure why. I had the most updated Photoshop CS4 version: 11.0.2.
Issue: When I tried to overwrite an existing image using Save for Web and Devices, I received an "Adobe Save for Web & Devices Error": "Could not write the file. A file system error has occurred"
This error prevented any file (originally created using Save for Web &Devices) from being saved again with the same name. I figured out the solution by finding the resolution for Mac Photoshop and adapting it for the PC version. The solution for me was to delete the following files: "Default Settings.iros" and "Recently Used Optimizations.irs" (the only two files present) in the following directory:
C:\Documents and Settings\[user profile name]\Application Data\Adobe\Adobe Illustrator CS4 Settings\en_US\Save for Web Settings\
Note that there were other sub-directories of the "Save for Web Settings" folder - I didn't touch any of those. The problem is now resolved and Photoshop seems to function normally.Honestly, I haven't had problems with reading/writing files to/from network drives, but I have read on this forum that there are times when it causes problems for people.
And yes, if you used the command line NET USE (or the Explorer Map Network Drive) function to create the drive, it is actually using Windows Networking behind the scenes.
-Noel
Maybe you are looking for
-
How do I edit text in Edge Animate?
I do not code. I just want to format my text boxes in Edge. What if I only want a portion to be in bold? What if I want to indent in a certain spot? I have been cutting and pasting from a word document. Some formatting comes through while some d
-
Audio file doesn't play on the server
hi, i have embedded an audio file on a page. it plays perfectly fine in whatever browser i use to preview it, but when i put the page on my server the play controls do not appear, only the quicktime logo appears. url:http://www.doctorastronomy.net/am
-
A fairly simple question, I'm sure, but I'm stumped - I'm trying to send plaintext to a LaserJet P2055d as a downlevel job {i.e. simply copying a file to the share path}. However, it includes a number of central European characters such as žđćšč whic
-
Is it possible to use variable with interval in BEX for filter or pl funct.
Hi, we have filters in which variables with interval are being used, as well as planning functions in which a variable with interval should be used. In the planning modeler everythings works fine. But I have problems to fill values for these type of
-
My iPad is freeze wen I go to seting
I really upset.my iPad is new and I go to setting and my screen is freez. Is some problem with storage&backup Please I need help Thanks