When booting from SSD I cannot see all the files on my HDD

Hi All,
I have installed an SSD in my SuperDrive port and made this my default boot drive. I am able to succesfully boot using the SSD with newly installed OS Mavericks. However once I've booted from the SSD my HDD only shows a handful of files but not my Home Folder with the majority of my files. When I restart and select to boot from the HDD I can see all of my files as I should. I can also see the SSD with the OS Mavericks installed. I'd like to boot from the SSD and run all applications from it while simply opening my HDD to view any stored files, music, or pictures. Does anyone know why my HDD isn't showing everything when bootign from the SSD?
Thanks - JT

Sorry about wall of text, I did put line breaks in but they seem to have gone awol.

Similar Messages

  • I cannot import my AVCHD files by using log and transfer. I can see all the files, but when I add the file to import que it doesnt work, the status is a red (!) and says that its no data. I have tried with different cards and different cardreaders, but it

    I cannot import my AVCHD files by using log and transfer. I can see all the files, but when I add the file to import que it doesnt work, the status is a red and says that its no data. I have tried with different cards and different cardreaders, but it is still the same. Why?!

    Please give us more specific information -
    What make/model camcorder are you using?
    Are you absolutely certain this is AVCHD video?  Tell us more about the video settings you used in the camcorder (eg, frame size, frame rate, quality level)
    Why are you attempting Log & Transfer from a card reader instead of from your camcorder?  Have you tried doing Log & Transfer from your camcorder?
    Are the SD cards straight from the camcorder, unaltered, or are you just using the cards as storage?
    Are you using FCE 4.0 or FCE 4.0.1?

  • TS3274 Somehow the information on my iPad is too large and i cannot see all the icons at once. How do I go back to the normal size? all the icons. How can I resize the infor on scren?

    Somehow the information on my iPad is too large and i cannot see all the icons at once. How do I go back to the normal size?

    Have you tried resetting your device? http://support.apple.com/kb/ht1430

  • Not seeing all the files on a shared Windows server??

    I'm using a Windows Server 2003 to share files between Macintosh an Windows users. But sometimes the Mac users (10.4) don't see all the files (in the same folder) that the Windows users do! I've checked on the server and I don't see any (obvious) permission problem ... So why aren't all the files displayed???
    Any help is greatly appreciated!
    Jerome

    Hello Herr Jerome, I have the same problem, here in our company. We have around 70 employees connected to a windows server network. There are 68 PCs and 2 macs, one of which is mine. We have a special directory on the server called macdata, but other users place their files in their own respective directories, to which we normally have access.
    Since yesterday, if anyone else places files from PC on to the server for me, I cant see them. I can see all other files but not the ones copied since yesterday.Our support guys have tried pretty much everything including resetting permissions, to no avial. finally they received an error message: Caution older mac systems will have problems reading more than 65000 (plus a few files). But there are in advance of 100 000 files on our server, but the extra 35 000 wernt put on there just yesterday.I´m running Macosx 10.4.11 which is by no means an old system.
    I´ve spent the day hunting the Internet for a solution, but Info on this subject seem to be scarce! I mean this is a very big problem in a business environment, our IS dept has been trying to scrap the macs for years and I´ve been working here on a mac and fighting for 15 years. So now our IS has at last a valid reason for switching us to PCs.
    I don´t understand Apple not publishing these limitions in a prominent spot on their website, not to mention a solution because it´s a crucial limitation, people should know about. Apple truely is not interested in corporate, nor in its truly loyal champions bravely fighting aganst the PC onslaught

  • I am running out of memory on my hard drive and need to delete files. How can I see all the files/applications on my hard drive so I can see what is taking up a lot of room?

    I am running out of memory on my hard drive and need to delete files. How can I see all the files/applications on my hard drive so I can see what is taking up a lot of room?
    Thanks!
    David

    Either of these should help.
    http://grandperspectiv.sourceforge.net/
    http://www.whatsizemac.com/
    Or search 'disk size' in the App Store.
    Be carefull with what you delete & have a backup BEFORE you start, you may also want to reboot to try to free any memory that may have been written to disk.

  • When browsing documente library contents from client application, cannot see all files

    We are currently running SharePoint 2010 Enterprise in a small environment. On one of my sites, I have a document library with various documents uploaded (docx, xlsx, pdf). I am unable to see all the documents when browsing the library from Word/Excel/Adobe
    Acrobat. For example:
    - At the root level of the library, I have 5 folders
    - In Folder 1, I have 10 PDF files
    - If I go into Adobe Acrobat 11, for example, and paste the address of my site in, I can see the library and I can click on it and see the 5 folders.  If I click on Folder 1, there are no PDFs listed.  Even changing File Type to "All Files"
    still returns 0 results
    Things I have tested:
    If I view the library in the browser, I can see the 10 PDFs in Folder 1.  They are not checked out and they are visible to everyone
    If I click Library>Open w/ Explorer, I can see all 10 PDFs in Folder 1
    If I try using other client applications (Word, Excel, etc..), I cannot see any files in Folder 1, even when I change the File Type to "All Files"
    If I click in some of the other Folders in the same library from within a client application, sometimes I can see the files but most times I cannot
    What could be causing this?  I do not see any errors in any of the event logs.

    Hi Sephiroth,
    I think my observation is when you browse from word/Excel/Adobe it is taking your local system credentials and so  not showing files when you access.
    local system account means the account which you used to login to the system.
    For example,you logged into the system as contosomo\xyz and you are trying to connect to the site using Contosomo\setup account,what my point is though you logged in to the site using the setup account site is taking your xyz account credentials and so it
    not showing any files as xyz obviously will not have access.
    To confirm this, you can try by giving atleast read access to the local system account (in this case xyz) to the library and then test again whether you are able to see the files or not.
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem.
    s p kumar

  • I cannot see all the data in target disk mode

    I have an issue where my MacBook pro is not booting into the Yosemite.  I see the progress bar hangs at about 45% on the startup screen. I called Apple support and they asked to use the target disk mode to connect to my mac and then copy data like that. I am using the same technique but I am not seeing all the data under users. My data under the folder users had another users data that I cannot see.
    How can I see my data for all the other users? Help please!!!

    Could be that the the data or directors on the HD are corrupted.
    - Copy all data you can
    - Try cloning the whole disk to another disk before you attempt recovery methods.
    - Try repairing the HD via Disk Utility
    - Try a data recovery program
    http://data-recovery-software-review.toptenreviews.com/mac-recovery-software/

  • Magic Mouse: Why Does It Need to Be Clicked When Restarting or Booting from Shutdown to Get Detected All the Time?

    Hi. I'm using Snow Leopard via USB external drive (the hardisk is blank- testing something with Leopard). When I start the late 2009 iMac and boot with the Option Key, I need to click the Magic Mouse all the time so the mouse can be detected and move the cursor to the Snow Leopard icon ( in its boot menu ). After the Magic Mouse is detected, it's good from there.
    Is this normal or there's something wrong with the Magic Mouse? The keyboard doesn't need to be pressed though to be detected, it's detected each time.
    Thank you in advance.
    God bless, Rev. 21:4

    I cannot see why you should have to click the magic mouse in order for it to be detected ... unless you have changed the batteries.  See my notes which cover the points made in your other recent post.
    Batteries.  Here are a few notes I've put together.
    Whether you use regular or rechargeable batteries you should buy the best. Discounted or unbranded batteries are more likely to give a depleted performance and may be of irregular size, often leading to connection problems.
    Apple’s own brand, Eneloop and Energiser appear to be the best. Rechargeable batteries for the standard Magic mouse are unlikely to exceed eighteen days before needing a recharge although the mouse itself can be a limiting factor.  I have seen reports that some Logitech mice vastly exceed this.    Apple may suggest more in their sales blurb but this is a realistic expectation.  The benefit (if you are organised) is that you can always have charged batteries available.  Regular batteries will give you between 25 and 35 days before they need to be replaced. Note.
    Never mix old and new batteries or rechargeable and regular.
    The notes above are based on my personal experience, not shutting down my machine and using it for around four hours per day.  Note.  Monitors do not always faithfully report battery strength, particularly the rechargeable ones. 
    When checking your mouse or keyboard batteries ... Turn off the device. Remove the batteries, Clean the terminals both inside the battery compartment and the batteries themselves. Replace or renew both batteries. Turn on the device.  You should get a blinking green light if the device is paired. Click the mouse to activate it.  The green light becomes steady.

  • Blue screen when boot from cd and cannot open diskutil

    HEllo
    i have problem my macbook pro 2011 i7 when i boot up after apple logo display white screen , when i boot from cd display blue screen , i'm format my ssd but same problem
    when i'm try open diskutil with CMD +R open Recovery network
    Any body can help me ?

    when i'm try open diskutil with CMD +R open Recovery network
    I don't understand what you are talking about.
    Startup - Blue Screen
    Startup - Gray, Blue or White screen at boot, w/spinner/progress bar
    Startup Issues - Resolve
    Startup Issues - Resolve (2)

  • [Solved] Grub errors 18 and 22 when booting from SSD

    Hello community,
    recently I purchased an SSD drive and am now having trouble doing an Arch install on it. Before that a 2TB HDD was in use. After building in the SSD I partitioned it (msdos partition table) creating partitions for swap, / and /home. Then I copied the files from the old /home partition on the freshly created one and installed Arch on the new / partition. Here's the partition setup:
    $ LANG=C sudo fdisk -l
    Disk /dev/sda: 2000.4 GB, 2000398934016 bytes
    255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors
    Units = sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Disk identifier: 0x0003a234
    Device Boot Start End Blocks Id System
    /dev/sda1 2048 3907028991 1953513472 5 Extended
    /dev/sda5 16065 4192964 2088450 82 Linux swap / Solaris
    /dev/sda6 4196352 65720319 30761984 83 Linux # old /
    /dev/sda7 65722368 577720319 255998976 83 Linux # old /home
    /dev/sda8 577722368 3907028991 1664653312 83 Linux
    Disk /dev/sdb: 128.0 GB, 128035676160 bytes
    255 heads, 63 sectors/track, 15566 cylinders, total 250069680 sectors
    Units = sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Disk identifier: 0x000a9841
    Device Boot Start End Blocks Id System
    /dev/sdb1 51863552 241582079 94859264 83 Linux # new /home
    /dev/sdb2 241582080 250068991 4243456 82 Linux swap / Solaris
    /dev/sdb3 2048 51863551 25930752 83 Linux # new /
    Partition table entries are not in disk order
    The problem is: booting from the SSD fails as follows: On the first try to select some Grub entry I get an error 22 "No such partition.". On any further try I get error 18 "Selected cylinder exceeds maximum supported by bios".
    What works is  to boot up the new system from the Grub residing on the HDD. So the problem is just the new Grub install in the SSD's MBR. Also it's not a thing of Grub's configuration, since copying the working menu.lst from the HDD install and reinstalling grub via grub-install /dev/sdb gives the correct Grub entries but selecting them results in the same errors.
    So currently I'm booting from the HDD and selecting the boot entry for the freshly installed SSD system there, which works fine. But of course I'd like the SSD to be able to boot without "help" on the part of the HDD.
    I tried to activate AHCI in the Bios but it didn't make any difference. The SSD is a Crucial M4 128GB.
    Thanks for any hints,
    PhotonX
    Last edited by PhotonX (2012-07-26 06:04:53)

    I created a /boot partition now:
    $ LANG=C sudo fdisk -l
    Disk /dev/sdb: 128.0 GB, 128035676160 bytes
    255 heads, 63 sectors/track, 15566 cylinders, total 250069680 sectors
    Units = sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Disk identifier: 0x000a9841
    Device Boot Start End Blocks Id System
    /dev/sdb1 51863552 241582079 94859264 83 Linux # /home
    /dev/sdb2 241582080 249831423 4124672 82 Linux swap / Solaris
    /dev/sdb3 2048 51863551 25930752 83 Linux # /
    /dev/sdb4 * 249831424 250068991 118784 83 Linux # /boot
    Partition table entries are not in disk order
    Disk /dev/sda: 2000.4 GB, 2000398934016 bytes
    255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors
    Units = sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Disk identifier: 0x0003a234
    Device Boot Start End Blocks Id System
    /dev/sda1 2048 3907028991 1953513472 5 Extended
    /dev/sda5 16065 4192964 2088450 82 Linux swap / Solaris
    /dev/sda6 4196352 65720319 30761984 83 Linux
    /dev/sda7 65722368 577720319 255998976 83 Linux
    /dev/sda8 577722368 3907028991 1664653312 83 Linux
    Then installed Grub on this partition: "grub-install /dev/sdb4". Then placed the SSD on the first position in the Bios, booted but got the same errors in Grub. So it doesn't matter where exactly Grub is installed, if it's somewhere on the SSD, it fails...
    edit: Concerning using UUIDs: I couldn't find any howto regarding Grub (legacy) configuration with UUID's. Could you point me to some example config?
    edit2: I now put the SSD on the first place in the boot list and started PartedMagic. But fdisk still recognizes the SSD as sdb and the HDD as sda. I think, the sdX identifier can be changed only by plugging the SSD in the first SATA port and the HDD in the second (while now it is the other way around).
    edit3: I tried to install Grub from the HDD installation on the SSD (executed "grub-install /dev/sdb4" from the HDD system) and found out that, though I created a /boot partition on the SSD, the Grub files installed directly on /dev/sdb are used. So I tried to install Grub from the HDD system onto /dev/sdb (executed "grub-install /dev/sdb" from the HDD system) and got error 22 even before Grub's boot list was shown. But maybe it's really a bad idea to install Grub on another drive than the system it belongs to is located.
    Last edited by PhotonX (2012-05-18 21:54:56)

  • JDeveloper 11g:Cannot see all the content of a page, because of size screen

    Hello all!
    I am developing an application with JDeveloper 11g, using ADF 11g.
    I created a page (all content is in a PSL), but when I deploy the application, if someone has a small screen, he can not see all
    information on the page.
    I want to know what I can do for him to descend, or turn left to see the entire contents of the page.
    Thank's,
    Nystan

    It kind of depends on the layout component you are using.
    A panel stretch layout should be able to adjust the size - unless you hardcoded values into its size.
    You can use a panel group with layout set to scroll to enable scrolling of the page content.

  • I have a big problem... I had synkronised my iphone 4s with my mac, and now i cannot see all the past events in my calender on the Iphone... how can i find them again???

    I have a big problem.... i had synkronised my iphone 4s with my mac, and now is all the past events in my calender gone on my iphone..... How can i restore that again???

    I have a big problem.... i had synkronised my iphone 4s with my mac, and now is all the past events in my calender gone on my iphone..... How can i restore that again???

  • Just bought new PC with windows 8.1 and installed the 64bit tunes as instructed by the new PC. Only a small part of my music library is now showing but  can see all the files in the itunes folder on an eternal hard drive linked to my old XP pc.

    Problem - changed PC to one with Windows 8.1 ( previous from 2006 with Windos XP). Previously all ITunes stuff on an external harddrive as 80 gigs of music too much for the old PC
    When attached Harddrive to new PC was told needed to install the new 64 bit iTunes as 32 bit iTunes not compatable.
    Did so but only a very small portion of my music is showning -  though rest of Library is still on the external drive in the folder.
    Help please
    Thanks

    Again many thanks. I have tried to tidy up the folders as per your idiot guide- which term is appropriate for me
    Under iTunes Media though I do not have  folders for Books,iPod Games, Mobile Applications, Movies, TV Shows so I only have  Auto Add to iTunes, Music, Downloads and Podcasts - My question here is is this OK.
    Next - Library files that you mention are there but do not end .itdb
    Next  - in the main iTunes folder followingon from Artwork and Media folders  there is some other  iTunes database stuff like Library Extras, Library Genius, Library and Music Library(xml) all dated 10/02/12 plus MimiPlayer .dll dated 21/02/14 and Set Up Short Cut dated22/03/14  
    AND there is also a Programme Files folder with a sub folder holding file folders called CD Configuration,iTunes Resources, iTunes Help Resources, iTunes Mini Player Resources and Mozilla Plugins all dated 24/03/14 ( when I downloaded the new iTunes) and then a lot of application extension stuff from 2011
    To recap I unistalled the old 32 bit iTunes and installed the new 11.1.5 (64 bit) version over the weekend  SO is any of the old stuff listed above required.
    Outcome right now is that as previously I can only call up the Downloaded music not Podcats or CD copies.
    Regards
    David Pugh

  • HT1657 Error when renting movie:  Error code cannot download because the file is corrupt.

    Hi-Yes I restarted my computer, check firewalls, connection is good.  What do I do?
    Cheers,
    btw apple support team is a flipping joke.

    Contact support and see if they cna give you a fresh copy. It's probably with the file..

  • Cannot see all the essbase dimensions when performed reverse engg.using ODI

    Hi,
    I performed the reverse engineering process for getting the dimensions from Essbase to the Model. First time the session has shown an error. When i right clicked the session in the operator and clicked on restart it has run succesfuly. But only the Accounts dimension got reversed. The rest of the dimensions are not seen in the Model. Please suggest

    I have got to import my actuals data which is ther in Oracle database to Planning. As i was told that ODI is not compatible with EPMA, i cannot load data into Planning using ODI. As anyways the data is to be stored in essbase itself i want to use ODI to load the data into essbase. For metadata upload i am making use of Interface tables
    My problem is
    1.do i need to have a staging table for bringing my actuals data into it first and then connect it to Essbase?
    2. If yes, what shud be the table format, like the columns?
    3. And, the user wants this to be automated. And if there are any changes to the base tables(tables with actual data in oracle) they shud be reflected in the essbase aslo. So is there any lookup functionality in ODI?
    I am new to ODI so having many doubts. Hope to see a reply soon

Maybe you are looking for