When bouncing jump doesnt work ?

Hi Forum
I bounce a lot of work with several major jumps involved.
When bouncing, the jump section ( i 've made a ruler bacwards ) is included in the bounce.
what do I do wrong !?
yours
B

I remember "my" Cubase 5 VST for Mac (OS 8.6-9.2.2) could bounce in the manner the OP is looking for. It is a very handy feature to 'test' if a something 'works' in a song. And though sonically identical, listening to a bounce in iTunes is different from listening to the Logic project playing. So I understand the wish for it.
What I would do if I wanted to achieve this, is simply first do a Save and then *Save as...* (don't include assets). I'ld call it something obvious, like "Mysongsoriginaltitle"-short version. My main project will stay safe, saved and unaffected, this newly saved version will be edited, as you recommended! So I'ld cut away the skipped section, Save +"Mysongsoriginaltitle"-short version,+ bounce +"Mysongsoriginaltitle"-short version,+ listen to +"Mysongsoriginaltitle"-short version+ in iTunes, say "Nēh, doesn't work" and trash the bounced file and the new project file. Or I'ld say "That's it!" and also cut the skipped section out of the main project and continue finishing my very serious piece!
Message was de-embarrassed by: Eriksimon

Similar Messages

Changing Permission when sudo cmd doesnt work

This is what the permission says:
" d-wx-wx--- 3 Spitfir3x admin 102 15 Feb 16:13 /Library/Folder"
This is what happens when I use the sudo command in terminal:
"unknown-00-23-12-27-ef-32:~ Spitfir3x$ sudo chmod 775 /Library/Folder
Password:
chmod: Unable to change file mode on /Library/Folder: Operation not permitted"
I tried it the regular way to, and used disk utility to try to fix permissions, but nothing worked and I can't gain access to the file.
Help

Post to the Unix forum under OS X Technologies.

How do i back up my iphone when the screen doesnt work?

i dropped my iphone today and it landed screen down but did not smash, then the colours started to turn strange on the screen and now all there is are blue and black lines going down the screen, i took it into apple and asked if it was fixable and they told me i need to back it up. but thats where the problem is i cannot back up my iphone as itunes is asking me to insert my passcode but i cannot see the numbers on the screen, ive tried guessing a few times where the numbers are but it does not work, is there any way of backing up my iphone without having to put my passcode in my phone?

If you perform the backup using the computer you normally sync with, it shouldn't ask this. If that computer is not available or you have never done so, you're out of luck. You can't.

HT4367 and what do you do when the above doesnt work?

i tried the beta 4 instructions from the dev site....they didn't work.
i had to restore, which downloadd an image from Apple. The restore worked, i reconfigured the device, tried again with beta 4, instructions in the PDF are wrong (again) as i was not able to choose the .ipsw file to use.
Now i have a door stop that wont restore - the only reason i tried to put on beta4 was for a review, and now i have an iTV3 that no longer works.
Yes i've tried everything under the Sun. I even copied in the beta into /Users/peter/Library/iTunes/Apple TV Software Updates
bash-3.2# pwd
/Users/peter/Library/iTunes/Apple TV Software Updates
bash-3.2# ls -l
total 3482480
-rw-r--r--@ 1 peter staff 565875516 11 Sep 00:53 AppleTV3,1_5.0.2_9B830_Restore.ipsw
-rw-r--r--@ 1 peter staff 565875516 10 Sep 21:51 AppleTV3,1_5.0.2_9B830_Restore.ipsw.orig
-rw-r--r--@ 1 peter staff 651268336 10 Sep 21:49 AppleTV3,1_5.1_10A5376e_Restore.ipsw
Using the "touch" command on the original file in the (seen above renamed to .orig) caused iTunes to at least try and download a new restore image....without success.
Why it would recognise the new beta 4 file in there is beyond me, but that also triggered a new download. And failure.
Right now the iTV3 is now workng. Restores dont work.
I'mm gnna try the Windows approach and reboot - after i move these .ipsw files somewhere else first.
cheers
peter

i couldnt edit the above which is annoying.
Typoos:
Right now the iTV3 is now workng. Restores dont work.
Should be: NOT working.

Using scanner on an HP C7280 all in one when printer component doesnt work

I have an HP C7280 that has been having problems not printing for a lot of reasons that are not fixable. However, I would like to use the scanner portion of the printer. Is there a way to get the printer to scan/copy only and eliminate the printer side of the "all in one"?

I coveredwgn,
Welcome to the HP Support Forums. I understand that you would like to retire your printer and only use it as a copier/scanner.
To better assist you, would you please give me some information on the reasons why the printing side is being retired? I’m asking because there are some errors that can occur that will stop you from using the scanner/copying features, in particular copying as it will use the printer side of things. In addition would you please let me know how the printer is connected (USB cable, ethernet, or wireless)?
Thank you.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

What do you do when your facebbok doesnt work in your laptop?

'''bold text'''

When you see this, you have a backup that has been encrypted.
This can be something you've turned on (perhaps by accident), or you've got an email account on your phone that forces any iTunes backups of your phone to be encrypted.
Either way, there will be a password that you know on the backup.
It could well be your email password - so it would be worth while attempting to use that one to access your backup.

My iPod mic doesnt work very well even when its by my mouth why is that?

My ipod mic when i facetime doesnt work very well the other person cant hear me sometimes why is that?

The mic is the little hole on the back side of the iPod by the camera lens. It is clear and unobstructed?
Open the Voice Memos app and see if you get good respnse on the VU meter.

Playbook requires me to pay for support when it did not work from the beginning and they could not fix.

lack of email app- makes this may purchase virtually useless. because
cant bridge with my bb 9700. maybe twice after deleting from both, and rebridging, i got connections. i cant spend an hour bridging every time. since may this is unfixable. the support people cant fix it after dozens of hours. got lots.of emails from them though. asking if i was resolved. when i answered no, they asked me to do it all again. they have no fix for this.
can type documents, but cant email them to anybody. same with excel. no way to attach documents when the bridge doesnt work.
i am a ceo,and i am moving my entire organization off bb becuase of this.
have spent many many hours from the beginning in may, and now they want me to pay a 129 dollar fee to get support when it has not worked right from the beginning.
i bought an ipad today and i am absolutely blown away by how much better it is in every single way. dozens of bbs are going away now.
slow, no.email, locks up all the time, stand by button restarts tablet, no bridging without total reload on both devices. why would i go through this anymore? it is costing my business a fortune with myself and my people trying to make the playbook work.
we will get ipads and make more money.
i have tried to stay loyal to bb, but after being told i have to pay for support
when i did once get a connection through bridge, reply locked up everytime on an email. could not type.

I would like to add my support to this comment.
Strike 1) Bridging a BB 9700 with a PB is flaky at best. Even if you run the very latest software on both, it does not work properly. This is NOT a user issue but a programme/application issue. RIM software running on RIM hardware and O/S and NOT being able to connect properly = RIM fault.(see my other post: My Bridge connects, it exchanges data like passwords, number of unread emails and my playbook notifies me when someone calls my BB, but it does NOT unlock)
Strike 2) All this used to work fine during the 90d grace suport period (apart from the flaky bluetooth issue that required a hard reboot of the BB whenever the connection was broken in a bad way)
Strike 3) Now, after a PB OS upgrade (which I faithfully applied), several phone upgrades (due to another problem) and the latest Bridge application install, it all doesn't work anymore, 100 days after I bought the flipping thing. so I have a fancy ebook reader, not the productivity enhancing tool I can use on the go.
So now I am stuck with a forum that can't help, a technical database that does not contain this support information and a broken RIM application on RIM Hardware and O/S that I paid a lot of money for. And now they want more to look at this incident????? I am sorry but if this was a problem caused by usage, configuration or any other user error, I could understand it. But this is all completely in RIMs ballpark. I have done everything right. It connects. It just DOES NOT WORK!!!!!
As I said in my other post, an evaluation of the PB in my company is ongoing as a possible management tool by people I know quite well, as I work in the area, but my advice would definitely be to stay away until basic functionality like emails, attachments, calendars etcetera are all suitably solved and usable by the average manager with sausage fingers and no clue about bluetooth, hard reboots and who won't be able to hold down the power, + & - buttons at the same time as the fingers won't fit!!
So RIM, get your finger out, open up an email support channel or get some qualified support people go through this forum and help those people who have shown faith in your products and who now have real problems with your software and hardware. DONT HIDE BEHIND A STUPID SUPPORT FEE - MAN UP TO YOUR PROBLEMS!!!

On Safari, ipad connects to the internet. But when in applications such as Keynote, I try to e-mail presentattion it doesnt work.

I am a teacher and have my own iPad with a data plan. We also have a router in teh classroom for wifi, and it has a very strong signal. On Safari, the ipads can connect to the internet. But when in applications such as Keynote and HTML Egg, I try to e-mail presentat. or post website to web, it doesnt work. I tried re-setting the proxies and the router, no luck. Please Help! I am a teacher and want my students to be able to post their websites on to the web, and e-mail themselves and their parents their Keynote Presentations.

Try this. Turn your iPad Off. Then disconnect the power going to the router for 30 seconds or longer. Then replug the power to the router (allow it to initialize) and turn On the iPad. Hopefully everything will connect. If not, see below.
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
iPad Mail
http://www.apple.com/support/ipad/mail/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

I've just installed CS6 creative suite mainly for photoshop CS6. It comes with camera raw 7.0.something, but need something newer to use my canon 6d. When I download camera raw 8.5 and install the raw converter doesnt work anymore, wont even open or isnt

I've just installed CS6 creative suite mainly for photoshop CS6. It comes with camera raw 7.0.something, but need something newer to use my canon 6d. When I download camera raw 8.5 and install the raw converter doesnt work anymore, wont even open or isnt available anymore in the plugin list. Tried to reinstall everything for a few times, but nothing helps.

When I search for updates the raw converter doesnt get update automaticly. Frustrating, is costing me the whole morning.

People Cannot Hear Me When I make Calls on iPhone 4, Bought a new iPhone 4, uploaded all of my own information from the backup, and it still doesnt work, help!

I went in to apple, they couldnt figure it out, I am on AT&T so I was figuring on going into their store today and seeing if its something with the network, if not I am going back to apple, but this is literally a brand new phone i bought yesterday, not refurbished or anything, brand new, does anyone know why this isnt working? Everything else works fine, the mics both work, its just when I make calls or someone calls me the mic doesnt work.

When you see the same issue on more than one hardware device, it means that the problem is likely to exist outside of the hardware. Two things to investigate would be the software/firmware on the backup and issues with the cellular network. It's probably safe to rule out the cellular network as well.
First, make sure that you have imported copies of all the information (pictures, videos, documents) on the device. Do this thorough itunes, and the applications (photographic and document processing) on your computer. Perform a firmware update then restore the device as new. If the problem persists, then you may actually have the worst luck and discovered two devices with an identical issue.
Read each of the steps before initiating the DFU.
!. Connect the iPhone to any computer running a fully updated version of iTunes.
2. Press and hold both "home" and "sleep/wake" buttons
3. After eight seconds let go of only the sleep/wake button.
4. Keep holding the home button until you see a popup mesage in iTunes.
5. Read all all the popups, then use iTunes to update the iPhone's software.
If the popup fails to show, repeat steps 2 through 4

My Ipod Touch conects to my wi-fi, but when I open safari, or any other app that needs internet, it doesnt work. what should I do and why is this happening?

My sister bought me an ipod touch less than a month ago. when he first came, he was conecting normal to my wifi, but today, he isnt. I use the same wifi at my laptop, and its perfectly working. My ipod identify the network, conects to it, but when I open an app that needs it, it doesnt work. What should I do?
And why is this happening?

- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections

Re: i was charging my iphone 3GS yesterday in electricity when once it turned off suddenly while it was in quarter battery. I tried charging it again but it didint open, i tried to plug it into my laptop but itunes didnt recognize it and it doesnt work.

Re: i was charging my iphone 3GS yesterday in electricity when once it turned off suddenly while it was in quarter battery. I tried charging it again but it didint open, i tried to plug it into my laptop but itunes didnt recognize it and it doesnt work.

Hello candymerna,
At this point I would recommeng resetting the device if if will not turn on.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
From: iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If it does turn on, but will not charge then take a look at this part of the article iPhone: Hardware troubleshooting found http://support.apple.com/kb/ts2802
Power/Battery
Battery does not charge from the USB power adapter
Important: Only original iPhone can be charged from a FireWire-based power source. If iPhone is connected to a computer that's turned off or is in sleep or standby mode, the battery may drain.
Verify that the outlet being used is working.
Try another USB power adapter if available.
If no other USB power adapter is available, try connecting to a high-power USB 2.0 port (not a keyboard). The computer must be turned on and not in sleep or standby mode.
Try another USB cable if available.
Also refer to iPhone and iPod touch: Charging the battery.
If it is charging, but not recognized in iTunes take a look at one of these articles depending on your Operating System.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
or
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
Cheers,
Sterling

I was charging my iphone 3GS yesterday in electricity when once it turned off suddenly while it was in quarter battery. I tried charging it again but it didint open, i tried to plug it into my laptop but itunes didnt recognize it and it doesnt work. help

i was charging my iphone 3GS yesterday in electricity when once it turned off suddenly while it was in quarter battery. I tried charging it again but it didint open, i tried to plug it into my laptop but itunes didnt recognize it and it doesnt work. help plzzz

Hello candymerna,
At this point I would recommeng resetting the device if if will not turn on.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
From: iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If it does turn on, but will not charge then take a look at this part of the article iPhone: Hardware troubleshooting found http://support.apple.com/kb/ts2802
Power/Battery
Battery does not charge from the USB power adapter
Important: Only original iPhone can be charged from a FireWire-based power source. If iPhone is connected to a computer that's turned off or is in sleep or standby mode, the battery may drain.
Verify that the outlet being used is working.
Try another USB power adapter if available.
If no other USB power adapter is available, try connecting to a high-power USB 2.0 port (not a keyboard). The computer must be turned on and not in sleep or standby mode.
Try another USB cable if available.
Also refer to iPhone and iPod touch: Charging the battery.
If it is charging, but not recognized in iTunes take a look at one of these articles depending on your Operating System.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
or
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
Cheers,
Sterling

My Ipod touch 5th gen is connected to wifi but internet doesnt work on it. It is showing full connectivity but when i try using itunes or safari, nothing loads.

My Ipod touch 5th gen is connected to wifi but internet doesnt work on it. It is showing full connectivity but when i try using itunes or safari, nothing loads.

Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

When bouncing jump doesnt work ?

Similar Messages

Maybe you are looking for