When burning a bluray I get this error message: Total bitrate is too high near time = 4.760000

When burning a bluray I get this error message: Total bitrate is too high near time = 4.760000
The video is encoded with sonic cinevison as avchd file and one AC3 file.

What can I do to avoid it?
Well, about the only thing you can do to solve "bitrate too high" errors is to lower the bitrate.

Similar Messages

BluRay error message "code 6, audio buffer underflows. Total bitrate is too high near time = 000000 seconds."

Hello,
I’m trying to create BluRays using Encore and I keep getting the following error messages: ‘code 6, audio buffer underflows. Total bitrate is too high near time = 000000 seconds.”
For info, I created a H264 Bluray - NTSC 24fps master from an Apple prores HQ in Adobe Media Encoder. Duration: 52m, size: 11go. I'm on Mac OSX 10.9.5, the bluray burner is Samsung SE-506CB/RSWD and the BR disks are TDK Blu-ray Disc 50 Spindle - 25GB 4X BD-R - Printable.
I looked around in forums and tried the following without success: replacing disk name to shorter name without space, creating bluray without menu frame, I also tried with a Mpeg2 bluray master. I tried to export a new master but I can't seem to be able to change the audio bitrate.
Can anyone please help ?
Thanks.

Hi Stan, thanks for getting back.
I tried to create a new master from Media Encoder but I can only export audio in PCM, I don't get a dolby option. See pic below.
I tried a new project in Encore and chose PCM instead of Dolby in the preference menu, but I still got the same error. Should I try again limiting bitrate to 15 ? I was on 30 before.
Please help, I've already wasted 10 bluray and this is getting really frustrating!

Blu-ray Error: "fatal error". Code: "6". "Video buffer underflows. Total bitrate is too high near time = 1.456333 seconds -

Every time i try to burn a blu-ray, this message appears and i can't proceed to the process.
Can anybody help me? I need it for my job.

I could swear I posted this yesterday. But no, the forum did not. Here is the recovered version....
From http://forums.adobe.com/message/6004943#6004943
You will find a number of other threads with this error message.
I think it usually reflects a real datarate problem, but sometimes because there are spikes that should not have occurred with the transcode settings used.
But the solution/workaround is to reduce datarate.
There may also be times where changes in the type of transcoding (CBR, VBR one or two pass) has fixed the issue for a particular project.
In this thread, Jon Geddes recommends a max of 27 or less.
http://forums.adobe.com/message/5214691#5214691

When i open itunes it get this error message (-42110) just did an update and it still didn't go away????

hen i open itunes it get this error message (-42110) just did an update and it still didn't go away????

Try the following user tip:
iTunes for Windows 11.0.2.25 and 11.0.2.26: "Unknown error -42110" messages when launching iTunes

When I try to sync photos, I followed all the steps, picked one folder. When I hit "apply" I get this error message: Are you sure you want to remove 30 apps from iPad. This will delete these apps and their data from the iPad. What have I done wrong

When I try to sync photos or music, I followed all the steps, picked onle folder, not the whole library. When I hit "apply" I got this message:
Are you sure you want to remove 30 apps from iPad. This will delete these apps and their data from the iPad" What can I change to just download the photos and not interfere with the apps?
(By the way, the memory is not even one quarter full)
Thanks for your help - Pat

I have the same problem. I updated my mac to 10.5, which then had me update apps like itunes, etc. then it wanted me to sync my purchased music to my ipad before i updated the ipad...which worked ok. then when i was syncing the photos i got the same message when i hit "apply" asking are you sure you want to delete the 12 apps from the ipad - clicked "no" and brought me back to the original screen. Got the same message when trying to move them from the hard drive to the ipad. WHat is going on and how do I correct this? Thanks

When starting iTunes I continually get an error message " The registry Settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes."

When starting iTunes I continually get an error message " The registry Settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes." I have unistalled and reinstalled iTunes several times and have cleaned up the registry using a 3rd party Windows utility. Any tips on removing this error message for good?

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

I keep getting this error message when I (right-click) on a photo file on my desktop to burn to a CD. I don't understand this code...does anyone? Thanks Ariel**:The disc can't be burned because an unexpected error occurred (error code 0x80020000).

I keep getting this error message when I (right-click) on a photo file on my desktop to burn to a CD. I don't understand this code...does anyone? Thanks Ariel**: The disc can’t be burned because an unexpected error occurred (error code 0x80020000).

I tried every obvious solution to this problem with different types of disc (-R; +R; -RW and +RW) and the problem persisted. Then I read about removing a hyphen in picture filenames. I renamed all the images and bingo there were no further problems. Apple should have solved this by now. This error code has been reported for several years and my MacBook Pro is quite new. Anyway, I hope this helps. It does work.
Piggywiggle

TS1368 I keep getting this error message and can't open the iTunes store. I've reinstalled iT a half dozen times with no results. "Registry settings used by the iT drivers for importing & burning CDs & DVDs are missing" reinstall iTunes

I can't open the iTunes store and keep getting this error message. "Registry settings used by the iT drivers for importing & burning CDs & DVDs are missing. Reinstall iTunes." I've reinstalled iT a half dozen times with no results.

You might have two different things going on at once here.
Starting with the registry settings message.
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

HT1926 when i try to install update i get this error message the feature you are trying to use is on a network resource that is unavailable any ideas

every time i try to update itunes i get this error message The feature you are trying to use is on a network resource that is unavailable then asks me to find the folder containing the instalation package ITunes.msi

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

I am trying to install MasterCollection_CS6_LS16. When I click the install file I get this error message: We've encountered the following issues. Installation on case-sensitive volumes is not supported. Please choose a different volume for installation.

I am trying to install MasterCollection_CS6_LS16. When I double click the install file I get this error message: We've encountered the following issues. Installation on case-sensitive volumes is not supported. Please choose a different volume for installation. What does that mean? How should I proceed?

Hey iraravitz,
Could you please let me know what version of OS are working on.
You might receive this error when you attempt to install on a drive with the HFS+ Case Sensitive file system, which is not supported for installation of Adobe Creative Suite 6.
So, please try installing on a drive that has been formatted with a supported file system.
You might refer the KB doc link mentioned below for the same:
Error "Case-sensitive drives not supported" or similar install error | Mac OS
Let me know if this helps.
Regards,
Anubha

Just updated to IOS 7 and two issues: First when I connect my iPhone to my computer I get this error message:itunes was unable to provider data from sync services".

Just updated to IOS 7 and two issues:
First when I connect my iPhone to my computer I get this error message:itunes was unable to provider data from sync services". I'm not sure what this really means...
The second issue is when I try to select "Manually Manage Music"
The iPhone "My iPhone" is synced with another iTunes libary on "MY-PC". Do you want to erase this iPhone and sync with this iTunes library? An iPhone can be synced with only one iTunes library at a time. Erasing and syncing replaces the contents of this iPhone with the contents of this iTunes library."
So... I don't want to do that, but I do what to be able to Manage my music. I'm not sure what it means by being synced to another iTunes unless it means to an older version of itunes?
Anyone have any ideas?

I cannot address the sync services error right now, but the error that you receive when you change from sync to manually manage music is what happens when you change. Once you change to manually manage music, it erases all of the music and will only put the music that you want on the phone, content that you manually drag over to it. See if this support document helps you out. http://support.apple.com/kb/HT1535

When I try and launch Firefox, I get this error message A copy of Firefox is already open. Only one copy of Firefox can be open at a time." and have tried all of the trouble shooting tips, can you help?

When I try and launch Firefox, I get this error message >A copy of Firefox is already open. Only one copy of Firefox can be open at a time." and have tried all of the trouble shooting tips, can you help? I thought if I were to completely uninstall and re install it might help, but I cannot seem to find instructions to do this....

See [[Firefox is already running but is not responding]], the image shown in that article is the Windows equivalent of the error message that you are receiving, but the information relates to the Mac.

I am having a problem with my cs6 running very slow and when i save i am getting an error message that says, "This document is bigger than 2 gb (the file may not be read correctly by some TIFF viewers.) please help

I am having a problem with my cs6 running very slow and when i save i am getting an error message that says, "This document is bigger than 2 gb (the file may not be read correctly by some TIFF viewers.) please help

wen6275,
It looks like you're actually using a camera or phone to take a photo of your monitor.
That's not what is commonly known as a "screen shot".
It looks like you're on a Mac. Hitting Command+Shift+3 places a capture of the contents of your entire monitor on your Desktop; hitting Command+Shift+4 will give you a cross-hairs cursor for you to select just the portion you want to capture.
I'm mentioning this because I fear I'm not construing your original post correctly when you type "I am working with a large files [sic], currently it has 149 layers, all of which are high resolution photographs", so I'm wondering if there's some similar use of your own idiosyncratic nomenclature in your description of your troublesome file.
Perhaps I'm just having a major senior moment myself, but I'm utterly unable to imagine such a file. Would you mind elaborating?

I am getting this error message when trying to download itunes on windows 7 32 bit: microsoft.vc80.crt.type="win32".version="8.0.907276195".publickeytoken="1p86369 ale18e36" Hresult: 0x800736fd

I am getting this error message when trying to download itunes on windows 7 32 bit: microsoft.vc80.crt.type="win32".version="8.0.907276195".publickeytoken="1p86369 ale18e36" Hresult: 0x800736fd
Can someone please Help?

I found htis other post https://discussions.apple.com/thread/3401328?start=0&tstart=0
I also found this in another post
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.)

I am trying to update my iPhone software but to do so I needed to update iTunes. When I try to do that, I keep getting this error message" "There is a problem with this Windows Installer Package. A program required for this install to complete could not

I am trying to update my iPhone software but to do so I needed to update iTunes. When I try to do that, I keep getting this error message" "There is a problem with this Windows Installer Package. A program required for this install to complete could not....

Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

When burning a bluray I get this error message: Total bitrate is too high near time = 4.760000

Similar Messages

Maybe you are looking for