When Burning a DVD from IDVD it does not encode Video

I am having trouble burning a DVD that will not freeze. All of them come out and are read by DVD players of all kinds, but it gets about 3 minutes into the video, and it freezes. I saved as Image to Disk, and it went through the Burning process flawlessly and played through in its entire contents, but then when I tried to burn it to a DVD, it made the menus fine, but when it came to encoding the video, it skipped that part and went straight to encoding audio and it did not work. It came out with just a little video on there, but it did not use the same process as the Save Disc to Image did. When I saved Disc to Image it played through the whole project in kind of a slow motion. The Burning to a DVD did not do that at all.
Please HELP!

I do not have 20gb free on my start up drive. I will once I delete the bulk of the project. How can I save the project to make sure that when I delete the big project, the parts that I have edited and want to not get deleted?
As for my Imovie, It is a 22 minute long home video that does include 5 chapter markers, including the one that starts the movie from the begining. There is music for every clip from my itunes. The theme i chose is the first one listed on the list. It starts in from the right side, and then scrolls across at the top. All of the menus work fine when i play my burned DVD. In fact, everything works fine except for that one part when it freezes up.
I do not understand what you mean by adding my movie to a drop zone and not to the background. The way i started it on Idvd was by clicking, create an Idvd from the menu on imovie.
I made a new step of progress and i got the encoding of the video, but it still did not work. It froze at 3:03 instead of 3:27, 3:38, or any of the others. This is the second disk i have made though that will play on my Powerbook. It freezes on everything else though.

Similar Messages

  • Error #-34506 when burning a DVD from iDVD 5.0.1

    Hi everybody,
    Everytime I try to burn a a finished iDVD project (a big QuickTime movie), I get a message : "There were errors while multiplexing and burning", error#-34506. In reality the project wasn´t burned, the DVD is empty. When I burn a short slideshow - no problems. I tried different manufacturers of DVD-Rs to no avail.
    Any help will be greatly appreciated.
    PowerMac 2GHz DP, 39 GB free harddisk space, MacOS 10.4.2, iLife 5, newest updates
    Regards, Adam

    I have the exact same problem. I am running a brand new iMac G5 2ghz with 10.4.2 and iDVD 5.01 and QT 7.03. I have tried it by importing my DV and MOV files into iDVD. Same failure with differnt media, even skipping one clip that I thought might be problematic.
    Have further tried it with different compression settings in preferences... high quality vs. high performance. Same error.
    Imported movies into iMovie and tried to run iDVD from there.... everything crashed. After a reboot, tried it again, and this time at least got a description of the error... something to the effect of "there was burning error but the disk has been untouched and can be reused, please try again..."
    Am no trying to reimport clips into imovie, and export as one movie in both DV and MOV formats, to try it again..
    Apple help couldnt even find the error number much less offer any other help..
    IDEAS??

  • I'm trying to burn a dvd from idvd but I keep getting error message, broken assets, but when I check my drop zones and their content there's no error messages on any of them?

    I'm trying to burn a dvd from idvd but I keep getting error message, broken assets, but when I check my drop zones and their content there's no error messages on any of them?

    Hi
    And if You change view - in main "window/view field" so that You see the box-plot structure.
    No exclamation marks there either ?
    and non at the front page ?
    iDVD do not copy Your material - only points to where it is stored. So if on any external hard disks, USB-memories, CDs or DVDs are missing - assetts are broken.
    Or if You changed location of any material or directed iPhoto or iTunes or GarageBand to a new Library - Then iMovie/iDVD also get's lost.
    Yours Bengt W

  • Why can't I burn a dvd from idvd? Could it be due to Mountain Lion?

    I have upgraded to Mountain Lion. I am now unable to burn a dvd from idvd. Could ml be the problem?  I have purchased new media-verbatim DVD-R. I can burn Cds. Help!!!

    I solved my issue. I tried three different brands of DVDs and imation finally worked. I had used the others before and they worked perfectly. So what is the deal, but anyway I found one that worked!!!

  • HT204053 when i buy songs from itunes it does not automatically download to my ipod

    when I purchase songs from Itunes it does not automatically download to my ipod although i have Icloud set up..

    Correct. You must sync your device with iTunes.

  • IPone 6, iOs 8.1.2 when removing the phone from the charging does not reflect the increase in the percent charge level , by reconnecting displays correctly

    when removing the phone from the charging does not reflect the increase in the percent charge level , by reconnecting displays correctly

    Addendum
    Last night charging for around 3-4 hours only charged a dead phone by 55% then left it to charge overnight
    Today the battery dropped from 6:15 am full charge to 53% at 10:38 am at time of writing this with
    1 phone call out for 30 secs
    1 incoming missed call,
    Whatsapp fetched around 10 msgs
    Email fetched around 20 ermail from 4 accounts but not viewed yet on phone

  • My Mac will burn a DVD from iPhoto but the images and videos will not play on my DVD player. I am using DVD-R disks

    My Mac will burn a DVD from iPhoto but the images and videos will not play on my DVD player. I am using DVD-R disks

    Hi john, try Burn...
    http://burn-osx.sourceforge.net/Pages/English/home.html

  • When burning a DVD from Elements 13, it freezes at 90%

    when burning a DVD in elements 13, it freezes at 90% and locks up elements until I cancel burn.

    Jerry Jarrett
    If you wish to pursue your question about burn to disc, then I would be glad for the opportunity to be of assistance.
    The following would be my troubleshooting strategy and questions
    1. What computer operating system is your Premiere Elements 13 running on?
    2. Have you looked at the issue with and without the Intel HD Graphics 2000 and Higher preferences disabled
    (See Edit Menu/Preferences/General)?
    3. Where are you in Publish+Share/Disc/, DVD, AVCHD, or Blu-ray? And, what does the burn dialog's Quality Area
    show for Space Required and Bitrate? What brand/type/capacity disc are you using?
    4. Is the issue specific to one Timeline in one project? Or, is the problem there with another Timeline content and another
    project.
    I would prefer to see you sort out the burn to disc issue if possible because of the download problems associated with the 3rd party software
    that is typically needed to obtain the disc product from the Premiere Elements VIDEO_TS, BDMV, or ISO Image. Excellent 3rd party software if you
    can get it installed without a lot of companion garbage. Although how to have been described for the safest possible download and install, there
    are no guarantees that you will not be hit with a lot of computer cleanup just to get one excellent program.
    ATR

  • Sound problems with film made in iMovie when burned to DVD in iDVD

    PLEASE HELP!!!
    I have upgraded to iLife 09 and for all the bad that people have to say, I actually like it a lot. Anyway, it gave me the encouragement I needed to play with some old home movies I had stored with the aim of producing DVDs to give to my friends, and hopefully showing off the slick production values I have come up with.
    So after spending a week getting to grips with iMovie and editing an old holiday film with all the cuts, transitions, chapter markers and music etc that I wanted, I ended up with an hour long movie that I was happy with.
    Then to iDVD. After trying out all sorts of ways to go from iMovie to iDVD to ensure the best quality, I have finally given up trying to replicate the on screen quality of the movie in iMovie with the finished DVD, and just opted for the easy to use 'share to iDVD' option. The quality is not great, but then the footage is old anyway so not too much of an issue.
    Then I spend another few days playing with and learning iDVD and again end up with a finished product that I am happy with, with nice looking menu's and a slideshow etc.
    So I come to burn the final DVD, for which I pick the 'Professional burn' option which takes 4 hours but I am happy to wait if it means the best quality possible, and my DVD is done.
    I then play the DVD to discover my problem - the sound in the movie is not right. To explain further, in my movie I have reduced the sound of some of the film clips to nothing and placed music over the top. When played and previewed in iMovie it works fine - the music plays and the sound that is attached the the video does not. When previewed in iDVD it works fine - just as I had edited it in iMovie. But then when I burn the DVD, some of these sounds are present again which completely wastes all my hard work at the editing stage.
    I have searched and searched for help on this but am unable to find any.
    Sorry for the very long description and story behind my issue, but it is massively frustrating. Basically, at some point during the 'burn to DVD' stage in iDVD it decides to completely ignore most of the sound edits I have made on the movie in iMovie.
    If anyone can help it would be much appreciated.
    Many thanks in advance.

    Many thanks. Looking at that thread it looks like there are a few others having the same issue as me. Might be to do with not using the predetermined rates for clip slowdown and inputting my own.
    The frustrating thing is that I have only done this once right at the start of my hour long movie and if I change it now it with though the timing of my whole film out.
    Not much else I can do though I suppose.

  • I can't get transitions to work when burning a DVD from Keynote

    While trying to burn a DVD+RW from keynote, using Quicktime 7.5.5, I get a message stating warnings were detected during validation. Nowhere does it tell me where the errors are, or what to fix. If I burn the disk some of the transitions do not work. They freeze, or one slide shows through another. When I went through preview before burning everything worked fine, but when the DVD is placed in a player the transitions do not work. I removed all the transitions, then reburned the disc and things worked fine, but the presentation lacked pizazz.
    bob

    Which USB Superdrive are you referring to? If this is the one:
    http://store.apple.com/us/product/MD564ZM/A/apple-usb-superdrive
    it states it works with Macbook Air, Mini, or MBP with Retina display. If they told you differently, take it back for a full refund and show them their own website.

  • Out of sync audio when burning a DVD with iDVD

    Hello Folks,
    I'm trying to burn 3 - 1 minute quicktime files to a DVD using iDVD 7.1.2 and everytime I burn a disc the sound is out of sync. It seems to speed up and finish about 10 seconds earlier than the video. When previewed all is fine. I have checked the 3 quicktime files and they are perfectly in sync when played. Any suggestions ?
    Thanks

    Hi Bengt,
    Thanks for replying ! I spoke with tech support and we tried everything including saving it as a disk image but after the burn it still was out of sync.
    Then we tried creating a project in i Movie and then imported (shared) the project into i DVD and it worked !
    This was a frustrating issue to tackle but I'm ready for it if it happens again.
    Thank you very much for your help. Have a great day.
    Best regards,
    Joe F

  • No audio when burning a DVD from iMovie to iDVD

    Hope someone can help me here, I'm not getting any audio on the DVD I've burnt even though it's working fine in the preview screen on my desktop. Even the audio from the theme I've chosen isn't coming through.
    I'm using iMovie HD 5.0.2 and iDVD 5.0.1

    even though it's working fine in the preview screen on my desktop.
    You can't really depend on the preview function to pick up problems with a burn. That is the reason that saving to disc image is recommended. If that works, then the burned DVD will be ok.

  • Unable to successfully burn a DVD from iDVD

    I have created a slideshow in iMovies 9 with music etc and I am trying to burn it to DVD to show on my TV.
    Using the BURN button it runs through the menu rendering etc and gets to the burn stage, runs for some time saying MULTIPLEXING AND BURNING then ejects the DVD, and says DONE though it still says: TIME REMAINING: ABOUT 1 MIN and the burn symbol continues to spin.
    I am using a DVD-R disk.
    If I try the DVD in my player it doesn't recognise it, nor in my Mac, and looking at the disk it doesn't appear to have been burned.
    Any ideas what could be happening please?
    Message was edited by: Andalucia Dreaming

    Hi
    And if You change view - in main "window/view field" so that You see the box-plot structure.
    No exclamation marks there either ?
    and non at the front page ?
    iDVD do not copy Your material - only points to where it is stored. So if on any external hard disks, USB-memories, CDs or DVDs are missing - assetts are broken.
    Or if You changed location of any material or directed iPhoto or iTunes or GarageBand to a new Library - Then iMovie/iDVD also get's lost.
    Yours Bengt W

  • Why when we burn a DVD from iMovie, does it pause in different places?

    Why when we burn a DVD from iMovie, does it pause in different places?

    Hi
    does it pause in different places?
    During Burn ?
    During Playback of DVD ?
    On Mac ?
    On Stand alone DVD-Player ?
    During Burn.
    What brand of DVD ?
    What type of DVD ? DVD-R or DVD+R or +/-RW - SL or DL
    Did You set down burn speed in iDVD ?
    Free space on Start-Up (Mac OS) hard disk. HOW MUCH ?
    Video codec used (feed into) iDVD ?
    Yours Bengt W

  • How do you burn a dvd from imovie if computer does not have idvd anymore?

    How can I burn a dvd from imovie if this computer does not have idvd? is there anything in mountain lion that will allow this simple task to be completed.'
    When i try to finish a project in iphoto it wont even do that...can anyone help?

    Buy iDVD.
    Yes, there are other programs that will put a movie on a DVD.   I have tried most of the other substitutes including Toast, Burn, DVD Creator, Wondershare, and others.  None of them come anywhere near the ease-of-use and power of iDVD. IDVD is specifically designed to work with iMovie.
    http://www.apple.com/findouthow/movies/idvd.html
    With iDVD you can easily and quickly create DVDs with menus and graphics almost on the level of what Hollywood can do.
    IDVD is easy to get. It is available on disk as part of iLife 11.
    IDVD is a wonderful piece of software and well worth the low cost of $40.  (works with all Mac OS 10.5 and newer.)
    http://www.amazon.com/Apple-MC623Z-A-iLife-VERSION/dp/B003XKRZES/ref=sr_1_1?ie=U
    http://dealmac.com/lw/artclick.html?1,527850,1872219

Maybe you are looking for

  • Help! Has anyone else had this? Re: caller ID Issu...

    Dear all, I would understand if you didn't have the time to read my extensive notes below so the short version is the following (if you wanted a good laugh at my expense and a diatribe on the perils of switching ISP then do read it). My caller ID doe

  • Activation of update rule :Help Required Urgently!!

    Hi I am not able to activate an update rule from an ods to cube. In the start routine I am populating ITAB with amt when I add the following code in the update routine for amt : READ TABLE ITAB WITH KEY RECORD_NO. RESULT = ITAB-AMT. I am unable to ac

  • FM to create Sales Order from reference billing document

    Hi, I need to create a sales order from a reference billing document. Please tell me if there is any function module/BAPI to do that. Thanks in advance for the help Regards, Varun

  • Report Format like HFM

    Hello All, I am trying to replicate a report format that is identical to HFM Reporting and Excel add in in Essbase. Here is the Format how it looks like Column-1 Column 2(Sales) Prod Level 1      Prod Level 2a      Prod A 100 Prod B          200     

  • OS 5.1.1..how do I up grade to a higher OS that will support apps

    I have an I pod touch with OS5.1.1... I cant get it to run any of the apps that I want.. face book or messenger.. they all need a higher OS... what can I do