When calling someone it is dead silent until they answer, it doesnt ring.

when calling someone it is dead silent until they answer, it doesnt ring.

This requires more details like below:
CUCM version / phone models involved
Type of gateway / trunk / running config of gateway
Exact call flow
Was it working fine earlier / any changes after which it broke?
A debug + ccm trace for a test call with call details.
HTH
Manish

Similar Messages

  • HT1430 When I call someone it doesn't ring. It's just silent until they answer. Then I can hear them fine.

    I have had my iphone 5 for less than a week, and ive had this problem from the start...When I dial a number it doesn't ring it's just silent. Then when they answer I can hear them and they can hear me fine. Have a got something turned off?? I have tried turning up the volume when calling and tried the good old off and on again. Still no luck. Thanks

    Thanks John UK. I checked the firewall but it set to allow all incoming calls. So, I am still at square one. Any further suggestions?

  • When calling someone in handsets mode,couldn't hear anything until I turn it into speaker mode. Who has the same fault?

    When calling someone in handsets mode,couldn't hear anything until I turn it into speaker mode. Who has the same fault?

    I searched the iPod Touch forum for "iphone in recovery mode" and it appears there are two possible solutions:
    - Place the iPod in DFU mode and then restore it> 
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - Use this program to get it out of recovery mode:
    RecBoot: Easy Way to Put iPhone into Recovery Mode | Jaxov

  • When I call someone using FaceTime from my mac, they can see me but no hear me. Is there something I need to do to make this happen? I also have an iPad 2 and FaceTime works great on it if I call somebody. Why no sound from my mac FaceTime using a mac pro

    When I call someone using FaceTime from my mac, they can see me but not hear me. Is there something I need to do to make this happen? I also have an iPad 2 and FaceTime works great on it if I call somebody. Why no sound from my mac FaceTime using a mac pro and isight camera, mike combo.
    If I use google it works. If I use Ichat, it works. If I use skype it works.

    This sounds like something similar to https://discussions.apple.com/thread/3388112?start=105&tstart=0.
    Try turning down the speak volume (System Preferences->Sound->Output->Output Volume)  or the microphone gain (System Preferences->Sound->Input->Input Volume). Do this on both sides of the call.

  • When call someone touching another,waitng does not appear on iphone5

    when call someone touching another,waitng does not appear on iphone5

    Under (system prefernces>security and privacy) do you have 'disable automatic login' checked?
    I have it checked which means I must sign in to my account. To change the picture go to system preferences>users and groups. Hover over the picture and click on the glif at the bottom right of the picture.

  • TS3406 when i call someone i can hear them but they cant hear me.viber and facetime perfect?

    when i call someone i can hear them perfectly, they cannot hear me. facetime and viber ssuld perfect??

    Hi micheleforde!
    I have an article for you here that will help you troubleshoot this issue:
    iPhone: Microphone issues
    http://support.apple.com/kb/ts5183
    Thanks for being a part of the Apple Support Communities!
    Cheers,
    Braden

  • How do I block my number when calling someone

    How do I block my number when I call someone?

    You need to request that to your carrier.  Only they can hide your number from the Caller Id feature. Its not sometihng you can do on your phone.
    With that said, what does this have to do with Appleworks?   Apple works is an old defunct Office suite, like iWork, and Ms Office.  I'll request this be moved to the iPhone forum.

  • Iphone 4 cracking sound when calling someone.

    History - I've been having issues with iPhone4 ever since I got it on the 24th june. First the visual voice mail didn't work for the longest time. I did everything apple and at&t asked me to do and reset the phone and network settings. Finally I had to reset it as a new phone and couldn't use any back up. I did this a week back.
    I answered a call today afternoon and there was a cracking sound. The other person couldn't hear me and i couldn't hear them. I restarted my phone twice and I could hear them clearly. But they still couldn't hear me. I tried using earphones and the mic and they still couldn't hear me. My mic works fine since I can record just perfect and when I connect the earphones I can listen to music and hear the typing as well. Everything except when I call someone. Sometimes after restarting my phone it works. (like once in 5 times).
    WHAT DO I DO
    I realized I hadn't answered any calls for 40 hrs. And I'm pretty sure I didn't drop it. Plus it is well protected with a case. But I'm still pretty sure I didn't drop it.
    Any suggestions ??
    It has 4.1 installed.

    Do you know what might be the reason ?
    cuz somehow they always have reasons why not to replace it n' why it's not in warranty anymore

  • HT204380 Do I incur any charges for using face time (Apple ipad 4) when calling someone else?

    Do I (or the person I am calling) incur any charges for calling someone on face time (using Apple ipad 4)?

    There are no extra charges associated with Facetime in and of itself.   The only applicable charges are whatever you already pay for your internet connection, or your Cellular connection if you are connecting through that.
    Same applies for the person on the other end.

  • TS3367 FT won't ring when calling someone else.  I also can't send a FT message.

    When I try calling another FT user, I don't hear it ring (yes the sound is on) and the I get a message saying "Connectio lost".  It worked just fine last night.  I've verified that FT is activated and that "push" is on.  And I've restarted numerous times and turned the wireless on/off.  Any suggestions?

    Thanks John UK. I checked the firewall but it set to allow all incoming calls. So, I am still at square one. Any further suggestions?

  • Having problem with siri on calling someone

    Hi.. i'm having a problem with siri when calling someone..it says " i can't call using that number "
    Im from Mauritius, our mobile number having been migrated into 8-digits since 1 month. I'd turn off siri, reset setting.. its the same!
    whats wrong with that?

    i"m from Mauritius also having the same problem when calling someone using siri.
    i think its because, of the 8 digits number.

  • Whenever I call someone on FaceTime it doesn't ring on their device and says that they missed my call. Help.

    Every time I try to call someone on FaceTime on my MacbBook they don't get the option to respond to my call and instead their device says that they missed it. When people try to call my FaceTime the calls don't go through. How do I fix this?

    I have a similar problem.  I bought a new Mac and login with the same appleID as my iPad.  I changed the email address for FaceTime on my Mac to a different email address so I could FaceTime between my iPad and my Mac.  When I call my Mac, it rings but the answer icons (decline/accept) do not appear, just the "End" button.  It also says "null" at the top of the FaceTime window.  When my son calls with his iPod (same appleID, different email address) his works fine.  When I try to initiate a call from my Mac, I can call my son's iPod (it has the camera icon next to his email address), but I can't call my iPad (no camera icon next to that email address).  Any thoughts?

  • When people call my phone it only rings once and then goes silent until voicemail picks up?

    Is anyone having a problem with their voicemail on Iphone 4s.  When people call me it only rings once on their end and then goes silent until my voicemail picks up?

    Then get your iPhone checked out by an Apple Genius.. Or you can go online and Apple will check out your iPhone with an App sent via email.............

  • I have recently updated the operating system on my iPad. Now my alarm is silent and my FaceTime doesn't ring aloud when a call comes in. How do I fix this please?

    I have recently updated the operating system on my iPad. Now my alarm is silent and my FaceTime doesn't ring aloud when a call comes in. How do I fix this please?

    Do you see a half moon icon in the upper right corner of the screen? If so, you have Do Not Disturb enabled. Settings>Do Not Disturb. Turn it off.
    Or do you have system sounds muted?
    System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
    Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
    If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
    If you have the side switch set to lock screen rotation then the system sound control is in the control center. Swipe up from the bottom of the screen to get to control center. Tap on the bell icon and system sounds will return.
    If you have the side switch set to mute system sounds, then the screen lock can be accessed in the same manner as described above.
    This support article from Apple explains how the side switch works.
    About the iPad Side Switch - Apple Support

  • HT201436 When i call someone, the other person hears echo of his own voice.This happens all the time in all locations.Any help please??

    When i call someone, the other person hears echo of his own voice.This happens all the time in all locations.
    I am using STC network in Saudi arabia.(KSA) but i have also tried this using other networks in KSA and also with networks in INDIA.
    Any help would be highly appreciated. ??

    When i call someone, the other person hears echo of his own voice.This happens all the time in all locations.
    I am using STC network in Saudi arabia.(KSA) but i have also tried this using other networks in KSA and also with networks in INDIA.
    Any help would be highly appreciated. ??

Maybe you are looking for

  • My iphone 3 won't let me download free apps from itunes

    Every time I try it makes me verify my payment info, and then it tells me my session has timed out.  Does anyone know what I am doing wrong?

  • Error while collecting files in AE CS3 - You do not have permission to open this file (-54)

    I've got a rather large project that I'm attempting to collect.  35,000+ files to collect (lots of image sequences as footage), totaling near 80GB.  The collect process starts and copies files for a while, but inevitably errors out during the copy pr

  • About classes intertransfer [help]!

    the source file is compiled ok but the display is not what i want the grahic class in the source file is like to not be transfer please help me ,i need submit tomorrow thanks in advance..... ---------code start ----------- import java.awt.*; import j

  • Changes in PIRs

    Hi, Kindly let know of until which point in the planning process can PIRs be changed. Consider that PIRs had been entered thru MD61, MRP run and Planned Orders generated. How r changes to the PIRs be taken into effect then? If a planned order has bee

  • Master Data & Data Migration in PS

    MODERATOR:  no emails please.  message LOCKED. Hi All, Can you please brief me about the Master data in PS. Also how to move the data from legacy to PS.My client has only excel sheets pls advice. Muzamil