When calls get disconnected, call timer does not s...

I have had European unlimited account for several years, for the past couple of months when calling land lines the number rings, the number is answered and the line goes dead, the timer on the phone continues to increase, I have the same problem using either my dual skype phones (no pc) or using either of my iPhones, some s recalling the same number its answered and all is OK, its impossible to contact skype by email for help, the site just sends me around in circles but no contact made available to email any one.
This post was transferred from its previous location to create its own new topic here; its subject and/or title has been edited to differentiate the post from other inquiries and to reflect the post's content.

Ring/Silent switch on?

Similar Messages

HT3529 My iPhone is showing that I have one unread messages but when I click on it, it does not show this so-called unread message. How do I go about getting rid of this symbol, or find this unread message?

My iPhone is showing that I have one unread message but when I click on it, it does not show this so-called unread message. How do I go about getting rid of this symbol, or find this unread message?

Try This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

HT204408 When trying to log into face time I get the registering device does not have appropriate credentials, I have OSX 10.8.4 on my Mac Pro. I can log in using my IPAD

When trying to log into face time I get the registering device does not have appropriate credentials after I sign in, I have OSX 10.8.4 on my Mac Pro. I can log into face time without a problem using my IPAD.>

Please take each of the following steps that you haven't already tried, until the issue is reolved. If there's no resolution after Step 3, post your results.
Step 1
Sign out of iMessage in the Accounts tab of the preferences dialog, then sign back in.
Step 2
Log out of your user account and log back in.
Step 3
Boot in safe mode and test, then reboot as usual and test again.
Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.

My 4s Goes to speakerphone automatically while calling and does not go back to normal even after disabling speaker while calling

My 4s Goes to speakerphone automatically while calling and does not go back to normal even after disabling speaker phone button
AlsO sometimes I. Cannot hear anything in normal speaker even though the call Is going through and has been re ieved on the other end, I have to enable speaker and then disable it to route audio to normal speakers

I think that it is something wrong with kernel and graphic drivers but i'm not able to solve it from the beginning of using of Arch by me.
I'm not so sure this issue is software-related only because in my case it seems the laptop screen enters power-saving mode (10-min timeout) on its own without any events logged (as shown by dmesg) so my next thought was OK, I'm going to get rid of this issue disabling the screen power-saving timeout in the BIOS and set it to never power down or something like that and from then on managing power mode manually; ie: when I want to power down I will just use systemctl suspend/hibernate which work fine ... problem is: there are no related options in my BIOS for such timeout.
The only timeouts I have are in /etc/systemd/logind.conf set to 30min (#IdleActionSec) (commented) by default so these are not in effect because the screens goes blank after 10m which is less than the (default) 30m in logind. Maybe setting loggind to 9m (un-commented) to catch the event before the machine-default one ?
IdleActionSec=9min
IdleAction=suspend
Will check it and report back.

HT4245 face time does not connect when receiving or dialing out

face time does not connect when receiving or dialing out

It finally seems to work (2nd day now and counting)...
I tried the following with no luck:
upgrading to iOS 5
adding an associated e-mail and calling that associated e-mail
do a full-scale registration of the e-mail (and making a free purchase via itunes) instead of a 'facetime only' registration
this combo however seems to have done the trick:
keeping the ipad2 plugged in
changing the dns on the ipad to "8.8.4.4,8.8.8.8"
If it continues to work for a few more days, then i think i can say the the problem is finally resolved.

User gets "This network connection does not exist" when she tries to log on to Terminal Server (2008 R2)

User gets "This network connection does not exist" when she tryes to log on to Terminal Server (2008 R2)
I got more than 100 users. Shes the only one getting is. We tried four computers (All Windows 7 Pro)
Nothing useful in event viewer to mention.

Hi,
Thank you for posting in Windows Server Forum.
Does that user able to login previously?
From your comment, it seems that there is some permission issue with that user. As you have checked that user with different system also. Please check that user is added under “Remote Desktop User” local group and also allowed “Allow log on through
Remote Desktop service” permission under group policy. Also please check that when user tries to login it uses “Domainname\Username” format.
In addition for a try, also check by disabling firewall on one particular system.
To add users and groups to the Remote Desktop Users group by using Local Users and Groups snap-in:
1. Click Start > Administrative Tools, Open Computer Management.
2. In the console tree, click the Local Users and Groups node.
3. In the details pane, double-click the Groups folder.
4. Double-click Remote Desktop Users, and then click
Add.
5. In the Select Users dialog box, click Locations to specify the search location.
6. Click Object Types to specify the types of objects you want to search for.
7. Type the name you want to add in the Enter the object names to select (examples) box.
8. Click Check Names.
When the name is located, click OK.
More information:
Remote Desktop disconnected or can’t connect to remote computer or to Remote Desktop server (Terminal Server) that is running Windows Server 2008 R2
http://support.microsoft.com/kb/2477176/en-us
Hope it helps!
Thanks,
Dharmesh

Call log does not work. Iphone 4

Hi, I'm an Iphone 4 user, software currently on IOS 6.1.3, updated a couple of weeks ago.
Everything's fine and all, though one major problem that's been persisting - the call history is not working. Whenever an oncalling call (regardless if it's someone in my contact list or not) comes, the call log does not record the number and the entire log remains blank. I've tried resetting the settings as well as 'hard reset', but neither of these two have worked.
It's become absolutely frustrating, especially when I sold items off at Trademe and can't even track the phone numbers of anyone that gives a call saying they want to buy something (for the moment, I've currently got all pages saying that anyone interested should text my number, but as always, someone ignores that and just calls anyway). Not to mention it makes it a particularly big headache for work purposes as well and it obviously can't go on like this forever.
It'd be really appreciated if anyone can come up with a solution that can resolve this issue.
Thanks.

meehow wrote:
..I just upgrade my E52 from 034.001 to 052.003 and noticed that 'call log' function does not work anymore. The symptom is that nothing happens when pressing:
- "green" call button,
- Log option from the main menu,
- missed calls from the desktop.
I had to switch the phone to active Standby Mode which I never used before - this is the only way to see missed calls - the small "pop up" on the desktop.
Any suggestions how to fix it? Is it a known issue?...
I don't know how widespread your experience is but it is not universal as all the functions you describe work correctly for me with an E52 and 052.003 firmware.
Even if the upgrade reverted the log settings for Log Duration to "None" the "Green" key and the Log menu icon should bring the log up but with it empty, of course.

Nokia E73- Call log does not display entries

I recently purchased a E73 by itself.
For some reason the call log does not display any telephone numbers or activity in recent calls; missed calls, received calls, dialed numbers. It would show that I have a missed call but when I enter it, it says (no missed calls).
Any ideas? Please let me know...
Thanks

Enable and set log duration to 30days.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

When the program gets terminated unexpectedly (power failure, UPS fails), when I reopen it, it usually does NOT return the previous pages, as I have checked in the 'options' box,

# Question
When the program gets terminated unexpectedly (power failure, UPS fails), when I reopen it, it usually does NOT return the previous pages, as I have checked in the 'options' box, but goes to some random collection of pages often from months ago. Very frustrating - can anything be done to COMMAND it to save current pages and re-open there? (As I said, I have this box checked in the options, but it does not work ..

Very Important, how much Free Space is on your Hard Drive first of all? Click on the Macintosh HD on the Desktop, then do a Get Info on it.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Do they launch OK while in Safe Mode?

I cannot get itunes to play certain tv shows all i get is a black screen and the timer does not move what should i do?

I am trying to play a season on my computer but it will not play. The timer does not move and all i get is a black screen. Should i just repurchase the season. the season does play on my ipod.

http://support.apple.com/kb/ts3694
Error 20, 21, 23, 26, 28, 29, 34, 36, 37, and 40
These errors typically occur when security software interferes with the restore and update process. Use the steps to troubleshoot security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See the steps under the heading "Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store." If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.

I have a new iMac with osx 10.8.3 i can not get my hp laserjet m1522nf scanner to work. The printer works but when in scanner mode the scanner does not show up

I have a new iMac with osx 10.8.3 i can not get my hp laserjet m1522nf scanner to work. The printer works but when in scanner mode the scanner does not show up.I tried to install the newest hp driver for the printer but when I install the computer ca not find the printer.

Repair permissions and restart your computer.
Make sure you have the updated scanner drivers installed.
Install the gimp drivers: http://gimp-print.sourceforge.net/MacOSX.php
http://support.apple.com/kb/PH11070 OS X Mountain Lion: Troubleshoot a network printer
http://support.apple.com/kb/PH11143 OS X Mountain Lion: Reset the printing system
http://support.apple.com/kb/HT3669 Printer and scanner software available for download
What to do when you can't print

Call Blocking does not. Is this just a scam too?

Verizon call blocking is a useless 'service', dozens of calls come through with no phone number at all on the caller ID, something Verizon specifically states it will NOT DO. Any ideas?
Verizon call blocking does not address scammers and money-seekers who have caller ID of "Not-Available' -- honestly my dog could figure out how to block these but Verizon cannot. Besides paying more money to someone else, is there any hope for the people who expected the Verizon service would work?

Scam no. A service that needs to be update to the 21th Century, yes. Still based on early callerid tecnhnology which is easily bypassed by all those so called "telemarketers" . You should have now trouble with ligitimate callers, but lots of illegal calls come in.

Unable to update, when executed table gets lock and Execution does not stop even for an hour.

Following is my Query, which unables to update. When Executed, table gets lock and Execution does not stop even for an hour.
update Employees
set Status = 'Close'
where statusid IN (select statusid
from MyView
where DownloadedDate ='2014-07-27 00:00:00.000'
here Employee contains 3,00,000 of records and Subquery return 1,50,000 Empid
i tried in various ways but not able to solve, statusid column have no index on, i tried using cursor but it does not work.
plz let me know how to solve this Issue, Its very Important to get solve as all my further work depends on Updation
, THANKS IN ADVANCE.

See also your other thread with the same question:
http://social.msdn.microsoft.com/Forums/en-US/80243625-fc3b-4ee1-bce1-4adcdbc16c14/unable-to-update-when-executed-table-gets-lock-execution-does-not-stop-execution-even-for-an-hour?forum=sqlserversamples
Olaf Helper
[ Blog] [ Xing] [ MVP]

Before removing iPhoto (latest update crashed the app), I accidently removed it from my purchased Apps from the App Store. I accept iPhoto when I search for it, but does not put it back in my list. How do I get this back so that I can reinstall iPhoto?

Before removing iPhoto (latest update crashed the app), I accidently removed it from my purchased Apps from the App Store. I accept iPhoto when I search for it, but does not put it back in my list. How do I get this back so that I can reinstall iPhoto?
Thank you.

I found the answer just after posted this. Thanks to a user named CloudWalker. Solution is to go in AppStore, View Account under "Store" Menu and unhide any purchases.

How do I get itunes to recognize my bookmarks in Mozilla. When I sync my iphone, it does not give an option to sync Mozilla, only IE and Safari

How do I get itunes to recognize my bookmarks in Mozilla. When I sync my iphone, it does not give an option to sync Mozilla, only IE and Safari

Hello pbdanner,
It seems your iPhone isn't recognized in iTunes for Windows. The following article provides troubleshooting steps which may help you find a solution:
iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
Thank you for contributing to Apple Support Communities.
Cheers,
Bobby_D

When calls get disconnected, call timer does not s...

Similar Messages

Maybe you are looking for