When can i remove batt after putting MBP to sleep?

I know the computer will save the memory, perhaps i can call it "hibernate" when i put it on sleep. how long after i put it to sleep can i remove the power cord and battery?

After you put the computer to sleep there is no need to remove the battery (nor the A/C power for that matter.)
The computer will not automatically hibernate. Only if the computer is dropped or receives some sudden motion will the computer go into hibernation to protect the hard drive.
If you want the computer to hibernate rather than go into normal sleep you will need to change the safe sleep parameter. To do that you need to use the Terminal app (Utilities folder.) Use this command line:
sudo pmset -a hibernatemode X
where X is the desired parameter:
= 0 : Default sleep behavior on most Apple computers. RAM is still powered on while sleeping. Wake up is fast. Safe sleep is disabled.
= 1 : Hibernation behavior. System is totally shut down while sleeping. RAM contents are dumped to disk. Wake up is slow.
= 3 : Default behavior on Powerbook HD computers. RAM is still powered on while sleeping. Wake up is fast. Safe sleep is enabled, so RAM contents are also dumped to disk before going to sleep.
You would want to use "3".
QS 1.33 GHz & 867 MHz; TiPB 1Ghz & 1GB RAM; Orig. G3 PB; 20 GB & 5 G Mac OS X (10.4.7) 30 GB iPod Video (Black); MacBook Pro 2 Ghz

Similar Messages

HT3702 was a mistake that I tried to download it my baby that I can do for my account that the new works oh when can I remove it from my account

was a mistake that I tried to download it my baby that I can do for my account that the new works oh when can I remove it from my account

Not sure what you are asking - what did you download and what do you want to remove ? If you purchased something that you didn't mean to then all purchases are considered final, but you can try contacting iTunes support and see if they will refund or credit you : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
If you mean something else ... ?

My mac mac book pro w retina display will not go to sleep when I close the lid or put it to sleep.

My mac mac book pro w retina display will not stay asleep when I close the lid or put it to sleep.
I put the computer in my bag and when I open it again the machine is so hot I can almost not touch it.
I am affraid that the hardware is allready fried.
Also when I press a key to restart after it has been idle for a few minutes it often takes up to a minute to wake back up.
This machine is bran new..
What should I do?

Try a SMC reset:
http://support.apple.com/kb/ht3964
If no success, then use your warranty and bring it in to the nearest Apple repair facility for rectifying this problem.
Ciao.

IMac shuts down after putting it to sleep

Lately, my iMac G5 has been shutting down automatically after putting it to sleep. If I wake it up within a short period of time it is OK, but if I wait several minutes, it must be restarted.
Did I accidentily change a setting? Or is it a problem with the hardware?
Is there a setting I can check? I have tried to find one in Energy Saver and other places without success.
Thanks,
-tee

Welcome to Discussions - Please tell us which model G5 iMac you have (iMac release dates).I don't think you changed anything, I would suggest that you reset the SMU and see if that helps.
Please post back,
Miriam

I have an iPod touch, 3rd generation, and when I push the button to put it to sleep, my iPod takes a screen shot. It's really annoying. Is this a result from updating to iOS 4.3.3? Also, my screen is EXTREMELY sensitive-breathe on it and it turns on.

I have an iPod touch, 3rd generation, and when I push the button to put it to sleep, my iPod takes a screen shot. It's really annoying. Is this a result from updating to iOS 4.3.3? Also, my screen is EXTREMELY sensitive—breathe on it and it turns on.

- Are you also having problems with the Home button? Maybe it is sticking a little since to take a screen shot you depress the Home and Power/Sleep buttons at the same time.
- I have not seen your problem discussed here before.
- I would first try resetting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Next would be to restore the iPod via iTunes. First from backup and if problem persists, restore to factory defaults/new iPod.

How can I remove Babylon and put Google into toolbar?

How can I remove Babylon toolbar and put Google´s into my Firefox toolbar?
Thanks

Babylon: Removal (see [https://support.mozilla.com/en-US/questions/860950 Q860950])
* How do I uninstall Babylon <br>http://support.babylon.com/index.php?_m=knowledgebase&_a=viewarticle&kbarticleid=79
*How do I fully remove Babylon <br>https://support.mozilla.com/questions/746530

My imac turns it self back on almost immediately after putting it to sleep. Why and how do I fix it?

This is new as of a few days ago. I can't find anything in preferences to make it better nor did I change any setting. Not sure what's going on. The computer seems to be working fine except for that.

It's not supposed to do that, so there is no setting for it. Be sure you have shut down (powered off) the Mac and started it back up, if you have not since this problem occurred.
If you are manually putting it to sleep, make sure you are not "bumping" the mouse immediately after giving the Sleep command. Also, does this happen when the Mac goes to sleep due to timed inactivity?
Resetting the PRAM may help
http://support.apple.com/kb/ht1379
It may also help to reset "power management," which is called PMU, SMU, SMC, and other things depending on Mac model. The reset procedure depends on iMac model. If you can post back with the specific iMac model, I can link to the correct procedure. This is a list of all iMac models
http://www.everymac.com/systems/apple/imac/index-imac.html
A faulty USB device can cause this behavior. You can try disconnecting all USB devices including hubs, except for standard mouse and keyboard (if used). See if the problem recurs.

Not putting mbp to sleep when closing screen, possible?

Dear All,
I was wondering whether it is possible to close the screen without putting the MacBook Pro to sleep but instead having applications running or listening to music etc. Is it possible to adjust the settings for that? I haven't found anything in System Preferences, yet.
I would appreciate your help,
Jerome

Ya my blue tooth mouse works well for waking it up into clamshell mode, even though that's not what I was shooting for. I just want to turn of the silly mouse...LOL
The problem is with the clamshell, unless you have an external monitor attached you can not visually see anything to restart what ever application stopped when you closed the lid.

I can't remove keyboards after Emoji App

I'm having trouble with removing keyboards and I can't access some of the keys of the keyboard. If I go to Settings>>General>>Keyboard>>Keyboards. I can add keyboards and have now added like 10 of them but I can't delete them. I click on Edit and the red minus circle comes up but I can't select it. It is like the left part of my screen doesn't work and the bottom part of my screen doesn't work.
Also if I go to text, I can't click on the 123. I believe this has something to do with the Emoji app that I installed but I can't seem to get rid of it now.

When viewing your activated keyboards, instead of tapping "edit" you should try swiping to the right or left on the keyboard you wish to remove. this will give you a 'delete' option on the opposite site of the screen and will allow you to remove it that way as well.
Also, the emoji app you installed shoul have no effect on the Apple keyboard itself. Though, if its causing issues, you may want to remove it from your phone as well. Some of the emoji apps are poorly designed.
Hope this helps!

How can I reinstall Lion after putting in a new hard drive?

Hi, I recently had a new hard drive put on my imac27. When I rebooted it I noticed that the Apple store had set it back to Snow Leapard. How can I reinstall Lion without making a new purchase, Thanks.

Log into the Mac App Store with your original Apple ID. The redownload is free.
(68116)

Can't remove pin after making local adjustment

Instructions say that to delete an edit pin, click on it then press the Delete key. This removes the adjustment. I'm fininshed with my adjustments and just want to remove the pin. How do I do this and keep the adjustment?

The pin is how you select a particular set of adjustments if you want to readjust something so you shouldn’t be deleting it.
If you mean you want to hide the pin, then if you switch away from the tool the pin should disappear. You can also set the tool options down at the bottom left from Always to None or Auto or Selected to determine when the pin shows or not, but only when you are in that tool.

How can I remove music I put in as background music?

I selected a track form iTunes and put it in my project as background music. I changed my mind and now I want to remove it. How do I do that?

Click on the track. You should see a yellow border around it. Now hit the Delete key. Alternatively, you can click EDIT/DELETE SELECTION.

Can't remove highlighting after pdf created

I am new at adobe and am trying to figure out how to remove this. I took a microsoft word document and created a pdf. When I go to look at the created pdf, the body of the text is highlighted but the header and footers are not. I looked at a couple documents and the ones with header/footer are all the same, while those without a header/footer look fine. I have attached an image of what is happening.......how do I remove this?!?!?!

This typically happens when you click on the document. Just click outside the page and see if that does the job.

HT1491 Why can't I purchase after putting my payment info?

I put on my new card info but I cannot make purchases, is there a delay for new accounts?

What happens when you try?

Can't remove addresses after reply all

Hello,
When I click "reply-all", I'm unable to delete some of the addresses from the address bar. I select them and hit delete, but when I click away, they pop right back in! Anyone else have this issue? Perhaps it's related to one of my add-ons:
Attachment Extractor
Signature Switch
Spanish dictionary
Virtual Identity
Any help greatly appreciated! Thanks.
TB 24.6.0
Win 7 Enterprise x64 SP1

I also have this problem, using Thunderbird 31.0 under Mac OSX Mavericks.
I disabled all plugins, and the problem went away. I re-enabled Virtual Identity 0.9.18 and the problem came back.

When can i remove batt after putting MBP to sleep?

Similar Messages

Maybe you are looking for