When Change LDAP Port , Have to Rebuild?

I need to change LDAP port(389-> 1389)
- Admin port : 390 -> 1390
- 3 Master Replication
- Sun Java System Directory Server Enterprise Edition 5.2 SP6
sure, I need to remove exsting Replication Agreements and create Replication Agreements.
then, I have to rebuild all LDAP Database? (3 Master)
Thanks
Edited by: 861866 on May 27, 2011 1:33 AM

DISCLAIMER: this procedure is neither somewhere documented, nor officially supported, that's why you must consider all I'll write afterwards just as pure speculation.
SUPPOSE that you can afford to cleanly shut down all the servers in the topology at the same time, after backing up each of the dse.ldif configuration files, you could change the port references in the dse.ldif files for:
1. nsslapd-port
2. nsslapd-referral(s)
3. for each replication agreement:
3.1 DN
3.2 CN
3.3 nsDS5ReplicaPort
3.4 nsds50ruv(s)
f you intend to change also the admin/config DS instance, before restarting the admin server/console, remember to update the attribute nsslapd-pluginarg0 under dn: cn=Pass Through Authentication,cn=plugins,cn=config in the dse.ldif files of the instances and also refer to the docs:
http://download.oracle.com/docs/cd/E19850-01/816-6704-10/admin_config.html
before restarting the instances.
HTH,
marco

Similar Messages

  • Disabling LDAP / OD / Changing LDAP port

    I thought this was simple and would be no problem but I seem to be struggling.
    I have an 3rd party ldap service running on a macmini server with 10.6.2 and I want to run it on port 389. The service won't start as another app (OS X) is using it.
    So I thought no problem I'll find the LDAP and change the port. So opened directory services and changed it there with no results. Maybe OD is using it so changed that to SSL using Server Admin - That actually worked because then the Secure LDAP on my third party application shut down but normal LDAP was still blocked.
    So Can I somehow shut down or change the LDAP port 389 on OSX.
    Thanks

    Many Open Directory problems can be resolved by taking the following steps. Test after each one, and back up all data before making any changes.
    1. The OD master must have a static IP address on the local network, not a dynamic address.
    2. You must have a working DNS service, and the master's hostname must match its fully-qualified domain name. To confirm, select the server by name in the sidebar of the Server application window, then select the Overview tab. Click the Edit button on the Host Name line. On the Accessing your Server sheet, Domain Name should be selected. On the Accessing your Server sheet, change the Host Name, if necessary. The server must have at least a three-level name (e.g. "server.yourdomain.com"), and the name must not be in the ".local" top-level domain, which is reserved for Bonjour.
    3. The primary DNS server used by the master must be 127.0.0.1 (that is, itself) unless you're using another server for internal DNS. The only DNS server set on the clients should be the internal one, which they should get from DHCP if applicable.
    4. Follow these instructions to rebuild the Kerberos configuration on the master.
    5. If you use authenticated binding, check the validity of the master's certificate. The common name must match the hostname and domain name. Deselecting and then reselecting the certificate in Server.app has been reported to have an effect in some cases.
    6. Unbind and then rebind the clients in the Users & Groups preference pane. Use the fully-qualified domain name of the master.
    7. Reboot the master and the clients.
    8. Don't log in to the server with a network user's account.
    9. Export all OD users, delete them, turn off OD, turn it back on, and import. Ensure that the UID's are in the 1001+ range.

  • ORA-30931 when changing WebDAV port

    Hi,
    I've created the XDB_UTILITY package like described in note 209564.1 on the metalink site. This package is an interface to the dbms_xdb package and can be used to change the FTP and HTTP ports of the XML DB.
    Changing the FTP port is no problem but Oracle does not change the HTTP port. The error I get is 'ora-30931: Element 'httpconfig' cannot contain mixed text'. I've tried several portnumbers, the only moment I don't get the error is when I leave the parameter portnumer blank.
    I've googled for this error without success, hopefully somebody on this forum has got this error before.
    Best Regards,
    Kris

    Kris
    In 10.2.0.1.0 and later the xdb_utility package should not be used to change port numbers. This functionality was added directly to the dbms_xdb package via the getHttpPort, getFtpPort, setHttpPort and setFtpPort methods. If you get the problem you are reporting when you call those methods directly please open a tar with Oracle Support as this will need to be bugged.
    I'll ask someone to update the note you reference with this info.

  • I have 2 IMacs and MacBook Pro- can not work on FCP simultaneously when my network ports are on (open). How do I go about changing this?

    Hi!
    I have 2 IMacs and MacBook Pro and can not work simultaneously on FCP on all workstations when the network port is open. Can anyone help me on this?

    Did you purchase Final Cut Pro from the Mac app store? Or install it from disk? If from disk, you may have installed it on all machines using the same serial number, and using all of them simultaneously violates the license agreement. If you purchase from the App store the licensing is different and that may not apply.

  • How can i use dsadm to change the ldap port?

    I have a ldap with port 1389,I changed it to 389,now I can not start it because it is a non root user.
    Now I want to change the port back to 1389,but I can not use dsconf because the server is not running.
    How can i do now? How can i use dsadm to change the port?
    Thank u very much.

    My apologies, I didn't mean to be rude/impolite.
    I just wanted to emphasize that in a situation where a Directory Server doesn't even start, you cannot interact with the live server to configure the new port (either talking LDAP or otherwise). All you can do in that case won't be related with the LDAP (that's just the name of the protocol): either assigning network privileges to the user, or changing the Directory Server configuration file.
    The other thing I'd like to outline (and this could take a separate thread ;-) ), is that semantically, I'd prefer talking of a Directory Server instead of an LDAP Server because the former is 'something' providing Directory Services, whereas the latter is just the name of the protocol we use to interact with the server; but this is just my personal opinion, you don't have to agree with me.
    that's all folks!
    marco

  • Why does the port settings on my iPad change every time I sync with my computer. After syncing I have to go in and change the port settings so I can send and receive emails on my iPad.

    Every time iSync my iPad 2 with my computer it changes the port settings. Has anyone else had this issue?

    When you sync the iPad, do you have mail settings configured to sync to the iPad? You could have different settings on your computer that might be affecting the email set up on the iPad when you sync.

  • Error in people search when connecting through ldaps port

    Hello,
    I am getting following error when doing windows people search through ldaps port(636).
    The specified directory service could not be reached.
    The service may be temporarily unavailable or the server name may be incorrect.
    It is working fine when i am connecting thro ldap port.
    Could any one help me in this regard
    -mala

    Just setting the port in the console does not enable SSL. Do you have a certificate installed on that instance? If so, does your ldap client have that certificate (or its CA certificate) as a trusted cert? If not, you may need to run certutil to create/update the client certificate database.

  • Mail.app doesn't hava connection with imap server when changing network.

    Ive got a strange problem after upgrading OSX from 10.6.8 to 10.8.4.
    I have got a xserve, with osx 10.6.8. (mail) server installed on it.
    When i am in the office (LAN) mail works just fine. if iam home and wake my macbook from sleeping i see in the mail app the attention mark telling my something is wrong with the mail account.
    If i open the connection doctor it say's can't connect to IMAP server. if i check my iOS devices there is nothing wrong, everything is working and i can send/recieve mail. on iOS and OSX the settings are the same with SSL enabled and password type.
    When i tried to telnet the mailserver address with the IMAP or SMTP port i get a connection. so, there is no firewall blokking my connection.
    But now the strange thing when i quit my mail.app and start it again the mail gets connection again. So is there a problem when changing networks when the Mail.App is stil active?

    That's just to bad, will it be solved in a future release of OSX?
    I don't know... maybe Apple will force me migrating to Mavaricks.
    it seems that although w'r using DNS, the outside ip gets remebered or the connection isn't closed down properly when putting the macbook to sleep.
    I can try offcource to configure the outside LANip (Non dns) in my mail client.
    I will post with results..

  • SJAS not respond when Change port for Derby db

    Hi Folks
    when I change port from 1527 [because it is used by another protocol] for derby database to 3333 [using derby.drda.portNumber=3333 in /root/.netbeans-derby/derby.property file] I found that SUN APPLICATION server is not responding properly.
    NOT responding properly means:
    1. I can start it from command line but can't start from Netbeans(exceptions of derby etc)
    2. I can not see any page o/p in browser for admin and webserver8080 but ports are used by SUNApplication server (confirm by port scanning)
    anyone faced same problem please tell us possible reasons

    Hi,
    I did the same thing as you have done - changed the port number to 3333, without making any changes manually to the port values for derby in netbeans. After this i started the appserver from netbeans and i was not only able to start derby (in port 3333) but also the application server successfully. I did not get any exceptions whatsoever.
    Just curious, which version of app server are you using? Also, did you verify the settings for the application server that you are starting (using netbeans) under Tools->ServerManager ?
    I tried this with 9.1UR1 b01. To add to this, i was able to access the admin console and also the 8080 port.
    Edited by: mchondria on Oct 9, 2007 5:22 PM
    Edited by: mchondria on Oct 9, 2007 5:23 PM

  • When my husband and I got these iPhones . We had the same Apple ID .(not good) that has changed . We have a iCloud acct. how or what do I need to do to change on my setting under iCloud it has his Apple ID  and also on r PC it has only his info none of mi

    When my husband and I got these iPhones . We had the same Apple ID .(not good) that has changed . We have a iCloud acct. how or what do I need to do to change on my setting under iCloud it has his Apple ID  and also on r PC it has only his info none of mi

    To change the iCloud account on your phone you have to go to Settings>iCloud, tap Delete Account, provide the password when prompted to turn off Find My iPhone.  When you delete the account you will be given the option to either keep or delete the iCloud data from your phone.  This also, only deletes the account and the iCloud data from your phone, not from iCloud.  Your husband's phone won't be effected by this.  Then, to create a separate account, sign back in with a different Apple ID (you can continue to share the same ID for iTunes).
    If you have any photo stream photos that you want to keep on the phone, save them to your camera roll before deleting the account. 
    If you're sharing the same ID for iMessage and FaceTime you'll end up getting each other's text messages and FaceTime calls.  To prevent this, go to Settings>Messages>Send & Receive, tap the ID, sign out, then sign back in with your new iCloud ID.  Then do the same thing in Settings>FaceTime.

  • How do I change an old iCloud I'd when I do not have access to that email anymore?

    How do I change an iCloud ID when I do not have the email account anymore and i do not remember the password?

    If your device is signed into an old ID of yours that is an earlier version of the ID you want to sign in with, do the following:
    If you are using iMessage and FaceTime, make sure you are signed into these services with your current ID.  If they are signed into the old ID, go to Settings>Messages>Send & Receive and Settings>FaceTime, tap the ID, sign out, then sign back in with your current ID.
    Then temporarily recreate the old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Click edit next to the primary email account, change it back to your old email address and save the change.  (You should not have to verify the old email account so it doesn’t matter if you no longer have access to it.)  Now go to Settings>iCloud, turn off Find My iDevice and enter your current password when prompted (even though it prompts you for the password for your old ID).  Then save any photo stream photos that you wish to keep to your camera roll (unless you are using iCloud Photo Library).  When finished go to Settings>iCloud, tap Sign Out (or Delete Account if you are not running iOS 8) and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https://appleid.apple.com and change your primary email address back to the way it was.  Now you can go to Settings>iCloud and sign back in with your current iCloud ID and password (your data will download back to your device).

  • HT1040 trying to make an ibook and have 800 photos, want format of 8 photos/page, but default is not that- "create" the initial book from iphoto "album" it loads less than 800 pics and then when i change layout i have blanks.

    trying to make an ibook and have 800 photos, want format of 8 photos/page, but default is not that- "create" the initial book from iphoto "album" it loads less than 800 pics and then when i change layout i have blanks.
    if i clear the book so that it is all blanks and then try to load in the pictures i have it loses the chronology of the pictures that i had established in the album.
    is there a way to import photos into an ibook template and keep the original order of the photos without having to do them one at a time?
    also, is there a way to insert a photo rather than just dragging it? i have tried the cut and paste funciton but it doesn't seem to work, the target site doesn't seem to register with iphoto.
    many thanks for your help.

    Photos are added to book in chronological order.  So if you want to add them to a book in the order you have placed them manually in an album do the following:
    1 - select all the photos in the album.
    2 - use the Photos ➙ Batch Change ➙ Date menu option as shown here. Select any date and add 1 minute between photos.
    3 - select just one photo from the album and create a book from it.
    4 - in the book click on the Options button ➙ Book Settings button and make sure the checkbox for Auto-layout pages is unchecked.
    5 - drag the album with your book photos onto the book icon and they will be imported into the Photos tray of the book in your pre-determined order but not into the pages themselves.
    OT

  • Have installed cc2014, menues are not fully visible. when changing font, system (all new sony vaio, win 8.1) crashes completely.

    have installed cc2014, menues are not fully visible. when changing font, system (all new sony vaio, win 8.1) crashes completely

    Dear Zak,
    thank you very much! Your information solved the problem immediately!
    Best regards,
    Philipp Frank
    New website
    www.philippfrank.at<http://www.philippfrank.at>
    Dipl Ing Philipp Frank
    1010 Wien
    Jakobergasse 4/14
    +43 1 513 22 83 19
    +43 650 250 5000
    [email protected]<mailto:[email protected]>
    www.philippfrank.at
    Von: Zak Williamson (Adobe)
    Gesendet: Montag, 23. Juni 2014 20:40
    An: Dipl Ing Philipp Frank
    Betreff:  have installed cc2014, menues are not fully visible. when changing font, system (all new sony vaio, win 8.1) crashes completely.
    have installed cc2014, menues are not fully visible. when changing font, system (all new sony vaio, win 8.1) crashes completely.
    created by Zak Williamson (Adobe)<https://forums.adobe.com/people/ZakWilliamson%28Adobe%29> in Help with using Adobe Muse CC - View the full discussion<https://forums.adobe.com/message/6488371#6488371>

  • I am trying to set up my outlook 2007 account on i pad and the process sticks on verifying.  It would appear to be a problem with outgoing server and I have changed the port number but with no success.

    I have just purchased an i pad 2 and am having trouble with the e-mail set up.  Set up with wi-fi, i-cloud etc has worked fine but the i pad is recognising my outlook 2007 account details but is not verifying it.  The trouble appears to be with the outgoing server and I have tried changing the port number, but to no avail!  Also reset the account settings for holding messages on the server...help!  As you can tell I'm not very techy and I'm desperate to get the bloody thing working as I'm going away on Tuesday! Any suggestions?

    I had a similar issue and it was password case sensitive issue

  • I am getting an error when trying to download  the new Game of Thrones shows. The error is err = -61 You do not have the privilege to make changes. (err = -61) you do not have the privilege  to make changes. I have not had this problem before

    I am getting an error when trying to download  the new Game of Thrones shows. The error is err = -61 You do not have the privilege to make changes. (err = -61) you do not have the privilege  to make changes. I have not had this problem before

    Solution:
    Open Disk Utility.
    Select your external hard disk and run a “verify” on it. After a few minutes (depending on the size of your drive), you should be good to go. You don’t need to run a “repair” on it... (at least I didn’t have to). See photo for reference.
    This should fix the permissions issue, because on my Mac running Mountain Lion I was unable to edit the permissions in the get info dialog window even after "unlocking" the drive.

Maybe you are looking for