When charging my IPod 4th Gen I get the charging error
I have an Ipod 4th generation running on the latest Version of IOS, (6.1.3), and when ever I try to charge it, I get the 'Charging Is not avaliable with this accesory'. The charging cord is an Apple USB cord, and an LG USB to wall outlet converter. I had a previous charger that was an unofficial apple charger. It used to work, but recently Its been getting the error too. (By unofficial I mean not an Apple Product) If you have any Idea or need anymore Information Please Reply!
Thank You,
~Trevor
- Go to Settings>General>Date & Time and make sure date, time and time zone are correct.
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
Similar Messages
-
my daughters ipod 4th gen will no longer charge past 20% and will not connect to a pc in order to back everything up. the cable is working fine, otherwise it would not even charge to the 20%. i have tried the reset to not lose any data and no luck, home+power for 10-15 seconds. I really would like to not lose everything she has, again, because I can't back it up this time. I have tried charging via a wall outlet and PC and both charge fine, just only to 20%. I am using the cable that came with it so no aftermarket issues there. Please help so I don't have to reset everything again.
Because once it has charged enough to be powered on as soon as you turn it on it says battery is at 20% and will not charge anymore after that, it just runs for about 5-10 minutes before the battery dies again. The battery cycles discharge/recharge daily and its not on the charger at full charge for more than a couple hours and is never totally dead for more than a couple of hours.
-
I'm just wondering when IOS7 will come out for Ipod 4th gen. because half the free apps need the new IOS!!
Some apps have older versions available.
Try this if you want an App that says you need iOS 7 or later:
Go to iTunes on a computer or on a device running iOS 7 and find the app you want and download it using your Apple ID and password.
Now go back to your iPod Touch Gen 4 and go to the App Store and tap updates at the bottom right, then tap Purchased at the top. Find the app on the list that you just downloaded on the computer (or other device) and tap the cloud to download it. If it has an alternate version available that is compatible with your iOS, it will prompt you and allow you to download that.
Source: http://support.apple.com/kb/ht5919 -
Why dont the ipod touch 4th gen cant get the IOS7 software
why dont the ipod touch 4th gen cant get the IOS7 software update
Because it doesn't have enough RAM to use it.
(92457) -
Some of my applications have been saying I need the latest version of Adoebe Flash Player. When I try to download it I get the following error message: 'Frame Load interrupted' and the installation stops. Any suggestions?
You can only use apps downloaded from the App store, not via a browser. There is no Flash for any iOS device including the iPod.
-
When I try to start iTunes I get the following error message: Itunes.exe – Entry Point Not Found - The procedure entry point kCMByteStreamNotification_AvailableLengthChanged could not be located in the dynamic link library CoreMedia.dll.
Any answers how to fix it? All Im getting is error for the past 3 days!
-
When trying to install iTunes, I'm getting the following error "Apple Mobile Device failed to start. Verify that you have sufficient privileges to start system services". How do I fix this?
SAME EXACT PROBLEM! SO FRUSTRATED AND ****** OFF!
-
When I turn on my computer I get the following error messages:
Insecure Startup Item disabled. "Library/StartupItems/HP IO" has not been started because it does not have the proper security settings.
Insecure Startup Item disabled. "Library/StartupItems/HP Trap Monitor" has not been started because it does not have the proper security settings.
How do I fix these?Library/LaunchAgents: com.promethean.activmgr.plist
Library/LaunchDaemons: com.microsoft.office.licensing.helper.plist, com.promethean.activhardwareservice.plist
Library/StartupItems: HP IO folder - HP IO, Resources, StartupParameters.plist
HP Trap Monitor folder - HP Trap Monitor, Resources, StartupParameters.plist
These are the system extension errors
"/System/Library/Extensions/AppleGraphicsControl.kext"
"/System/Library/Extensions/AppleGraphicsControl.kext/Contents/PlugIns/AppleMux Control.kext"
"/System/Library/Extensions/AppleGraphicsControl.kext/Contents/PlugIns/ApplePoli cyControl.kext"
"/System/Library/Extensions/BJUSBLoad.kext"
"/System/Library/Extensions/EPSONUSBPrintClass.kext"
I do not know what any of these do or how to fix them. I have run multiple disk permission repairs & disk repairs. The startup & system extension errors continue to come up.
I even followed the directions to move HP IO & HP Trap Monitor to the trash, run disk permissions repair, put back in folder, then restart - and still am getting error message. -
I have downloaded "Lightroom_5_LS11_mac_5_7.dmg" for Mac to update my Lightroom 5.6 (build 974614) but when I attempt to open it I get the following error message "Lightroom_5_LS11_mac_5_7.dmg can't be opened as the disk image is not recognised". I'm running Yosemite OS 10.10 on a Macbook Pro (Retina, 13-inch, Late 2012 with 2.9 GHz Intel Core i7 processor).
Vk2mh it sounds like the download was not complete or corrupted. Where are you downloading the update from? Have you tried downloading again?
-
I have recently restored everything on my iMac after getting a new hard drive. When i try to use Elements, i get the following error code ERROR 150:30. Any ideas?
Did you use migration assistant to copy over programs, documents, and settings? You can't do that with PSE. Elements is not a tidy package in accordance with the apple developer guidelines. The installer strews stuff all of your hard drive in place the migration assistant isn't programmed to look and you can never hope to find all h the bits. You must always install PSE from scratch on a new machine. By attempting to copy it you have made a lot of trouble for yourself.
You will need to download and run this:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
and then you can go around and manually remove what you can reach. Look in applications, your hard drive>library>application support>adobe, your username>library>preferences. In the user library also delete any saved application states for PSE.
Then you can reinstall from scratch. -
when trying to Burn a DVD I get the following error:
'The drive reported an error:Sense Key=MEDIUM ERROR Sense Code=0x73,0x03'
Please advisethis reccommendation is to OS 10.5.8 only
Go to the hard drive find the following folders and look for the following file, com.apple.finder.Plist, delete it and restart the computer. Its found under the following folder Users-account name-library-prefrences. This helped resolve my issue for now. -
When updating iTunes to 11.4 I get the following error: "Files Shared by these updates" has an invalid signature. It will not be installed. Running Windows 7 64-bit.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
IPod 4th gen thinks it is charging even if it's not
Hello, I have an iPod 4th gen, and it thinks it is being charged, all the time. It always displays "charging" icon and lights up its display all the time, and consequently gets drained quickly (when I really have to charge it). I have done all the basic steps, reset, reload firmware, restore. Still the same. What should I do, short of sending it back to Apple?
If the iPod is running a version of the iOS prior to 5.0, you need to update it from iTunes on a computer.
(68579) -
Hi folks.
I'm currently selling my iPod 4th Gen to raise funds for my 5th gen. I won't be able to order the 5th gen until I have the funds from my 4th gen sale, and I just want to ask, how long does delivery take to the UK?
Also, is the warranty transferable? And does anyone know how I would transfer to warranty to the buyer?
Thanks,
TezThe warranty should be fully transferable, but you might need the original paperwork for when you purchased the phone, such as a sales receipt or order confirmation. This is used for proof of date of purchase, but I contacted Apple regarding the same issue and they said in some cases the warranty was still valid as long as the original UPC was still on the box for the iPod. Also, the Extended Apple Care Protection Plan is available for purchase for who you sell the phone to, given that it's still under the original warranty. I believe it's $59, and for people buying a used iPod from someone else, it's usually a good idea to go ahead and extend the warranty. I did the same thing and sold my 30GB iPod Photo on ebay in order to buy the new 60GB, and ended up getting about $240 for it, so good luck.
-
I get the following error message when attempting to load Lightroom: Error -302 when loading url aam://SAPCode=LTRM?productVersion=5.5?passPhrase=RRR9EU9BaSBdtGb7+BrzzYZ9hLdjmpvEWeq7/9gS Yn2+lUDLZNr9UveWEgxzaiobbibx4d6JK3R74HPAX4YFwTpkn6K3YQk6Ej82wRFyYvKwXKAVMfMhQCfW5qg8odoMny OV1JlBuT0gEMjSjG5EhuCR288pgnfgQbAmchGqKSU=
What can I do to solve the problem?Ewlett you are receiving this error because the AAM Detect plug-in is not yet installed. Please see Error referring to aam protocol when you click download button | CC for more details.
Maybe you are looking for
-
Open source user friendly SQL Qyery+Report Builder
hi guys Please help me find any link from where i can download OpenSource user friendly SQL Qyery+Report Builder thanks
-
The latest update came on Tuesday, I think. The problem was immediate, but I waited a couple of days to see if someone else could report it and it would be fixed. That didn't happen and, because the Feedback doesn't work (it won't fire up in the firs
-
Connect fios cable to pc.
How do i connect fios cable to my pc and use the signal with Windows Media center. I have connected the fios cable directly to the back of my pc. (RF in) When I try to set up tv in Windows Media center it cannot find the tv signal. Is there another p
-
Hi Everyone We're building a web site here that implement both basic and advanced searching functionality. Basic searching is essentially searching on various attributes of on table and advanced searching is across many tables (even possibly 20-30 ta
-
Hello, I try to deploy a web application compiled with NetBeans to WebLogic Server Version: 10.3.0.0 (AIX) and I receive an error. The application can be deployed without any problems to WebLogic Server Version: 10.3.1.0. The application is the most