When charging my phone makes a noise like it is disconnecting and reconnecting. Really annoying since I use it for an alarm clock.
I charge my phone by my bed at night. The last 2 nights it has made the sound like when you plug it into the charger, but it's just laying there. It did this several times which was not good for sleeping! I checked to make sure it was plugged in good and that the cord was not stretched tight. Any ideas?
Take a toothbrush and clean out the port on the bottom of your phoneMake sure the contacts on the plug are clean as well.
Similar Messages
-
When your Lenovo Twist makes a noise like a hair dryer -
I apologize for my English, but I have something to say.
Trying to finish my PhD thesis, I decided to buy one of the last Lenovo creations, the ThinkPad Twist.
Bought the last February, the fan noise becomes more and more like a hair dryer that never stop; I can’t work more than one hour because the noise is hardly resistible. I took the laptop to the library and the noise stop the calm of the place…
After this incident I tried to contact the support center to have one solution. This is my history:
First call to Lenovo support center, I explain the situation, a fan that never stop and sound like a hair dryer…. Answer: They propose me send the computer to the repair center: “tomorrow UPS will take the computer”. Just here fine, but I didn't’t receive the e-mail confirmation.
Second call, I give the number that they told me to write over the box for UPS , and I ask for the confirmation mail… they send me the confirmation mail and finally the Lenovo Support Center guy told me that UPS wouldn't’t go to my home to take the computer, according with my warranty, it’s my responsibility to the send the computer to the support center…
-So I decided to change my warranty to have the “On site/In-Home Service”, that means “a technician will be dispatched to arrive onsite, typically the next business day. *** Onsite service is available in metropolitan areas only”, and I live in Paris. -
Upgrade warranty bought May 02, 2013 (Thursday) and activated the next day (Friday). I decided to call the support center to update my request. The answer: "One technician will go to your home the next business day (Monday)", so I give all the details to arrive to my home, I change my schedule to be at home all the Monday and finally the technician never came… Only one guy of UPS to that one box. o.O
Next call to support center (LSC), I explain the situation “I wait for a technician who never came…”. Explanation from the support center: “Lenovo France have to forward one request to confirm my new warranty” but…. I explain: The warranty was activated in the website, in my computer and I received a lot of confirmation mails… So I ask, what I have to do? – Answer: wait….
Next day, next call to LSC, I ask for the situation of my request… Answer“Lenovo France have to forward one request to confirm my new warranty” but…. I explain: The warranty was activated in the website, in my computer and I received a lot of confirmation mails… So I ask, what I have to do? – Answer: wait….
7,8 cents for each call and 2,8 cents by minute of communication is the introduction phrase of the LSC number.
Today I called to LSC, May 10, 2013 (Friday), ONE WEEK after the upgrade warranty activation I ask for the situation of my request… Answer “Lenovo France have to forward one request to confirm my new warranty”but... I explain: The warranty was activated in the website, in my computer and I received a lot of confirmation mails… So I ask, what I have to do? – Answer: wait…. We will call you…
I am very disappointed. I was thinking that I had the most powerful computer in the market, one of the best Lenovo that all my coworkers talk. I am really unhappy, my new computer sound like an expensive hair dryer (1000 € - yes, euros) and the people that should help only tells me to wait - “we will call you when validate in France your warranty” - but…. The warranty is activated.
If my computer makes a noise like a hair dryer at least you have to know, do not you think?
Emilio
Solved!
Go to Solution.Hi Emilio, welcome to the forums,
sorry to read about your experience so far and would like to share some points which you might like to consider based on my personal experience as an IBM / Lenovo reseller.
In most of Europe the standard warranty conditions are for so called "carry-in" or "bring-in", this means that the customer is responsible for transporting their system to the service depot / partner, by post or other means.
Also it can take a little while, sometimes three weeks, for an on-site warranty extension / service pack to be fully activated when purchased some time after the system itself, even in the IBM days, and would not cover a call which had already been opened / started.
As your system is working, although the fan seems to be permanently running, you may need a little more patience and let's wait and see if they will cover your already opened call as an on-site.
I know this isn't maybe what you wanted to read, but is based on my experience, and as experiences will differ I can only hope that the right solution arrives for you a little quicker than I personally would expect.
edit; typo
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog -
I got Iphone 3 gs and updated ios 5.01 when charging my phone it keeps switching itself on and off
I got Iphone 3 gs and updated ios 5.01 when charging my phone it keeps switching itself on and off.
Same problem. Phone was unusable. I managed to turn airplane mode on during one of the phone's "on" moments. It went off once more but then came back on and stayed on long enough to back up and restore via iTunes. As I don't rely on the phone to retain photos, contacts or mail etc I chose to do a complete restore and treat it as a new phone. I did this just to make it as clean a restore as possible but you may be able to restore from your backup and get the same fix? All is good still some 24 hours later. Hope this helps.
-
HT1476 when charging the phone.charging going on and off whats wrong?
when charging the phone.charging going on and off whats wrong?
Can you try another charger and cable to see if it still happens?
-
HT1688 phone makes no noise, will not ring and cannot turn ringer up
phone makes no noise, will not ring and cannot turn ringer up
Did you check the silence/mute switch on the side of the phone above the vollume buttons? If you can see an orange line then it wont make any noise. You should flip it and it should work.
-
when i try to make icloud account on my iphone this massage show "this device is no longer eligible for creating a free i cloud account" how can i make my icloud accout on this device
Can anyone from Apple answer this question? I want to sell my ipod touch but it shows up as "This device is no longer eligible for creating a free iCloud account". What do I do? Can I go to the Apple store and request that they delet all accounts associated with the ipod? Is that possible? Help!!! Really frustrated at Apple right now.
-
Dears,
I am using iPhone 4 : i OS 7. When the phone is in sleep mode i cannot disconnect unwanted incoming call, Is there any upgrade coming for this for iPhone 4 users. How this can be sortedHello Bibhore,
Calls can be declined by hitting the sleep/wake button twice quickly.
Decline a call and send it directly to voicemail. Do one of the following:
Press the Sleep/Wake button twice quickly.
iPad User Guide - When someone calls
http://help.apple.com/ipad/7/
Cheers,
Allen -
so i dropped my iphone 4 in class and the screen is cracked. it wont turn on so i went home and connected it into my itunes and the phone just keeps beeping like every ten seconds and the phone lights up just a little. What does this all mean?
It means you should take it to the Genius Bar. You will no doubt need to buy an out of warranty replacement.
-
Macbook won't start or charge unless I disconnect and reconnect the battery connector each time .
I have a late 2011 model Macbook Pro, 10.7.5 OS and I've had no issues whatsoever up until a week ago. The night before if stopped working I did everything as usual, did some HW, emailing then I shut it down. I woke up the next morning and it wouldn't turn on so I figured it was dead, so I got my charger plugged it in and got no light, green or orange. What I got was a faint green blinking on the charger light and my battery level indicator wasn't working. I thought it was my charger but it wasn't because worked fine on my girlfriend's Macbook.
I googled and tried PRAM and SMC to no avail. When I tried the SMC I didn't take the battery out I just disconnected the connector (Don't know if it makes a difference) and Voila it worked and I thought I fixed the problem. I turned it off and the next day the same thing, I have to disconnect and reconnect the battery connector each time for it work. Other than this issue I have no problems, mac runs fine while it's on and I shut it down or restart it for awhile after I reconnected the battery but if I try to turn it back on or restart it hours after I've done that then it won't work . One thing I may add is after I reconnect and plug my charger in, the light is green for about 5 seconds (even though it's not fully charged) then turns orange .
I'm guessing I need a new battery or logic board , but I'll keep my fingers crossed .
I won't be able to set up an appointment until next week but I would like to see if I could get any help here in in the meanwhile.
Thanks !Hi, I dont know if this may be the cause as i too have the same problem. But it only occurs after i disconnect my Iphone from my macbook pro.
The Macbook has worked perfectly and then all of a sudden last week it started to shut down after i would disconnect my Iphone 5.
The mac wouldn't restart, charge or anything.
I tried all the trouble shooting reccommended, Shift Alt command button combinations. ( there were a fair few ) None worked.
Then i found out about disconnecting the connector.
This fixed the problem.
But alas, It done it again after my next sync.
This has done it 4 times now. And only when i disconnect the iphone after using itunes on the mac. I done it all correctly 3 times and the 4th time i just pulled it out with out ejecting from itunes, but still done it.
The iphone Syncs perfectly. I get everything i want onto the iphone. But for some reason as soon as the cord is disconnected from the mac BOOM. Dead mac.
If i leave the cord and the phone plugged in but still eject the phone it doesnt shutdown tho.
I found if i shutdown the macbook, then disconnect the iphone cord once the mac is completely shut down then my mac will start back up again with no problems.
As i said i dont know if this is the cause of your problem and if it will help you or not? But if not, maybe it will help someone else out who finds your post?
Hope you get your problem sorted
Chris -
iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???
as i said i have two iphone 4S,,,,,
1st one --- has os 5.1
2nd one has os 6.0
i tried 2nd one with carrier reliance gsm nd it works with that personal hotspot setting using USB...
but i want to connect the first 4S with carrier TATA DOCOMO GSM but its not working with the same USB feature????
plz reply asap...!!!
thnxxx in advance!!!If not this:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem.
Also heating sometimes works. See:
Why can't I select my wifi settings?
A trick that works frequently with iPhones:
Settings > AirPlane Mode ON, Do Not Disturb ON
Power down and wait 5-10 minutes
Power up
Settings > AirPlane Mode OFF, Do Not Disturb OFF
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar
Then:
Does the iOS device connect to other networks? See other networks? If yes that tends to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
I plugged my ipod into my computer to load up new tunes and it froaze on the time I dad connected it with the message 'do not disconnect' on the screen. Despite disconnecting and reconnecting it and ensuring it was charged up it will not operate. The 'lock' symbol is showing at the top of the screen even when I have moved the lock switch. I have been using my ipod for several years with no similar fault. What is the problem/solution?
I would first try resetting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
Next would be to restore the iPod from backup -
Android phone constantly disconnects and reconnects to vpn
When using verizon 4G the android anyconnect constantly disconnects and reconnects. When it is connected for about 10 seconds it is working normally. This does not happen on the phone when the user is connected to wifi. It is only on 4G.
5|Oct 30 2014|10:42:45|722028|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> Stale SVC connection closed.
5|Oct 30 2014|10:42:45|722028|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> Stale SVC connection closed.
6|Oct 30 2014|10:42:45|725007|70.199.141.46|11874|||SSL session with client outside:70.199.141.46/11874 terminated.
6|Oct 30 2014|10:42:45|725007|70.199.141.46|11874|||SSL session with client outside:70.199.141.46/11874 terminated.
5|Oct 30 2014|10:42:44|722028|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> Stale SVC connection closed.
5|Oct 30 2014|10:42:44|722028|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> Stale SVC connection closed.
6|Oct 30 2014|10:42:44|725007|70.199.141.46|11872|||SSL session with client outside:70.199.141.46/11872 terminated.
6|Oct 30 2014|10:42:44|725007|70.199.141.46|11872|||SSL session with client outside:70.199.141.46/11872 terminated.
6|Oct 30 2014|10:42:22|722022|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> UDP SVC connection established without compression
6|Oct 30 2014|10:42:22|722022|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> UDP SVC connection established without compression
5|Oct 30 2014|10:42:22|722032|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> New UDP SVC connection replacing old connection.
5|Oct 30 2014|10:42:22|722032|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> New UDP SVC connection replacing old connection.
6|Oct 30 2014|10:42:22|725002|70.199.141.46|11874|||Device completed SSL handshake with client outside:70.199.141.46/11874
6|Oct 30 2014|10:42:22|725002|70.199.141.46|11874|||Device completed SSL handshake with client outside:70.199.141.46/11874
6|Oct 30 2014|10:42:21|725003|70.199.141.46|11874|||SSL client outside:70.199.141.46/11874 request to resume previous session.
6|Oct 30 2014|10:42:21|725003|70.199.141.46|11874|||SSL client outside:70.199.141.46/11874 request to resume previous session.
6|Oct 30 2014|10:42:21|725001|70.199.141.46|11874|||Starting SSL handshake with client outside:70.199.141.46/11874 for DTLS session.
6|Oct 30 2014|10:42:21|725001|70.199.141.46|11874|||Starting SSL handshake with client outside:70.199.141.46/11874 for DTLS session.
6|Oct 30 2014|10:42:21|725001|70.199.141.46|11874|||Starting SSL handshake with client outside:70.199.141.46/11874 for DTLS session.
6|Oct 30 2014|10:42:21|725001|70.199.141.46|11874|||Starting SSL handshake with client outside:70.199.141.46/11874 for DTLS session.
4|Oct 30 2014|10:42:21|722051|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> IPv4 Address <192.168.75.101> IPv6 address <::> assigned to session
4|Oct 30 2014|10:42:21|722051|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> IPv4 Address <192.168.75.101> IPv6 address <::> assigned to session
6|Oct 30 2014|10:42:21|722022|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> TCP SVC connection established without compression
6|Oct 30 2014|10:42:21|722022|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> TCP SVC connection established without compression
5|Oct 30 2014|10:42:21|722032|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> New TCP SVC connection replacing old connection.
5|Oct 30 2014|10:42:21|722032|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> New TCP SVC connection replacing old connection.
6|Oct 30 2014|10:42:21|725002|70.199.141.46|11872|||Device completed SSL handshake with client outside:70.199.141.46/11872
6|Oct 30 2014|10:42:21|725002|70.199.141.46|11872|||Device completed SSL handshake with client outside:70.199.141.46/11872
6|Oct 30 2014|10:42:20|725001|70.199.141.46|11872|||Starting SSL handshake with client outside:70.199.141.46/11872 for TLS session.
6|Oct 30 2014|10:42:20|725001|70.199.141.46|11872|||Starting SSL handshake with client outside:70.199.141.46/11872 for TLS session.
5|Oct 30 2014|10:41:48|722028|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> Stale SVC connection closed.
6|Oct 30 2014|10:41:48|725007|70.199.141.46|8787|||SSL session with client outside:70.199.141.46/8787 terminated.
5|Oct 30 2014|10:41:48|722028|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> Stale SVC connection closed.
6|Oct 30 2014|10:41:48|725007|70.199.141.46|8799|||SSL session with client outside:70.199.141.46/8799 terminated.
6|Oct 30 2014|10:41:21|722022|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> UDP SVC connection established without compression
5|Oct 30 2014|10:41:21|722032|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> New UDP SVC connection replacing old connection.
6|Oct 30 2014|10:41:21|725002|70.199.141.46|8787|||Device completed SSL handshake with client outside:70.199.141.46/8787
6|Oct 30 2014|10:41:21|725003|70.199.141.46|8787|||SSL client outside:70.199.141.46/8787 request to resume previous session.
6|Oct 30 2014|10:41:21|725001|70.199.141.46|8787|||Starting SSL handshake with client outside:70.199.141.46/8787 for DTLS session.
6|Oct 30 2014|10:41:21|725001|70.199.141.46|8787|||Starting SSL handshake with client outside:70.199.141.46/8787 for DTLS session.
4|Oct 30 2014|10:41:20|722051|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> IPv4 Address <192.168.75.101> IPv6 address <::> assigned to session
6|Oct 30 2014|10:41:20|722022|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> TCP SVC connection established without compression
5|Oct 30 2014|10:41:20|722032|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> New TCP SVC connection replacing old connection.
6|Oct 30 2014|10:41:20|725002|70.199.141.46|8799|||Device completed SSL handshake with client outside:70.199.141.46/8799
6|Oct 30 2014|10:41:19|725001|70.199.141.46|8799|||Starting SSL handshake with client outside:70.199.141.46/8799 for TLS session.
6|Oct 30 2014|10:31:19|722022|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> UDP SVC connection established without compression
5|Oct 30 2014|10:31:19|722032|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> New UDP SVC connection replacing old connection.
6|Oct 30 2014|10:31:19|725002|70.199.141.46|8529|||Device completed SSL handshake with client outside:70.199.141.46/8529
6|Oct 30 2014|10:31:19|725003|70.199.141.46|8529|||SSL client outside:70.199.141.46/8529 request to resume previous session.
6|Oct 30 2014|10:31:19|725001|70.199.141.46|8529|||Starting SSL handshake with client outside:70.199.141.46/8529 for DTLS session.
6|Oct 30 2014|10:31:19|725001|70.199.141.46|8529|||Starting SSL handshake with client outside:70.199.141.46/8529 for DTLS session.
4|Oct 30 2014|10:31:18|722051|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> IPv4 Address <192.168.75.101> IPv6 address <::> assigned to session
6|Oct 30 2014|10:31:18|722022|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> TCP SVC connection established without compression
5|Oct 30 2014|10:31:18|722032|||||Group <GroupPolicy_ANY_SPLIT> User <user> IP <70.199.141.46> New TCP SVC connection replacing old connection.
6|Oct 30 2014|10:31:18|725002|70.199.141.46|8540|||Device completed SSL handshake with client outside:70.199.141.46/8540
6|Oct 30 2014|10:31:18|725001|70.199.141.46|8540|||Starting SSL handshake with client outside:70.199.141.46/8540 for TLS session.I experienced the same problem with my Lumia 800 and the MyWay audio/navi/BT telephone system in my previous and current Citroën C5 (both latest model (PhIII)): http://discussions.nokia.com/t5/Nokia-with-Windows-Phone/Bluetooth-and-3G/td-p/1288591 .
I first thought it had something to do with switching from G to 3G and back. But in the end I discovered that BT on the Lumia 800 just disabled itself, while connected to my cars BT system. I have started the procedure to send my Lumia tot Nokia Care. Keep You informed. -
Nano has worked fine for a couple of years being left connected to either one of our cars. However, every time car is restarted it won't play without being disconnected and reconnected. I have done a full restore.
Current cars are Range Rover Sport 2011 and Jaguar XK 2011.
Has anyone else experienced this issue?
Thanks,I had a similar problem. Try resetting and erasing the phone and restoring from a known good backup.
-
Since I upgraded to IOS5, my Smart Playlists are in a random order. Since I use it for listening to Talking Books this makes it useless. How can I control the order of a Smart Playlist?
It may be best to recreate the folder and the smart playlists from scratch.
tt2 -
The new appearance of the Notes App is really disappointing. I used it for lists and now it just makes my notes appear to be random paragraphs without visual separation. Am I missing anyway to customize the App?
No, you can't customize it. Try different apps available in the App Store.
Maybe you are looking for
-
Loading vector graphics at runtime
Hi, I'd like to know if there is any way or any vector graphic file format that i can load dynamically at runtime on a web-based flash application. I have some files in pdf that i want to load in and i can convert them to jpgs at runtime and load the
-
Huge number of idle connections from loopback ip on oracle RAC node
Hi, We have a 2node 11gR2(11.2.0.3) oracle RAC node. We are seeing huge number of idle connection(more than 5000 in each node) on both the nodes and increasing day by day. All the idle connections are from VIP and loopback address(127.0.0.1.47971 ) n
-
Java.io.FileNotFoundException when deploy converter in Tutorial
I try to deploy converter application in the Tutorial. Always got the following Error: java.io.FileNotFoundException:http://10.1.5.104:9191/converter/ConverterAppClient.jar checked in examples/src/converter. The jar file is not there. But I found the
-
Hi Everyone, I am in the process of making a few flash charts and i have a few questions I hope someone can answer for me. 1) The chart series colours seem to be pre determined, (blue, purple, v.light pink, turquoise, .......) is there any way of cha
-
Twice now I've run into situations where my wireless network connection to my MacBook was interrupted during a backup, and the sparse image (On a 1 TB Time Capsule) containing the TM archive became corrupt. I lost all my back-ups both times. A third