When click itunes a message says: AppleMobileDeviceHelper.exe - Entry Point Not Found ... and it still doesn't recognize my iphone or ipad.

When click itunes a message says: AppleMobileDeviceHelper.exe - Entry Point Not Found ... and it still doesn't recognize my iphone or ipad.

Hello ckkeith65
If you are having issues with AppleMobileDeviceHelper.exe then you would need to uninstall iTunes and its associated software in the order listed in the article below and then reinstall iTunes, as it is part of the installer file.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Regards,
-Norm G.

Similar Messages

  • When I turn on my computer,an error message says  "AppleSyncNotifier.exe-entry point not found The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll". Can't access itunes store,sync,buy etc. Help...

    When I turn on my computer, an error message says "AppleSyncNotifier.exe-entry point not found. The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll"  Cannot access itunes store, sync phone, etc. Two weeks ago did this and Apple support had me remove and reinstall iTunes. Doing it again. Help....

    With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
    Copy the libmxl2.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
    Reboot and see if all is well
    In case that your OS is Windows 7 (64 bit)
    1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    2. Copy file "libxml2.dll"
    3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
    4. Paste file "libxml2.dll" to the location.
    5. Reboot your computer, it should not display that message, it should be clear.
    Good Luck

  • Error message when clicking on links from thunderbird: Firefox.exe – Entry Point Not found

    When I click on any link in a Thunderbird email message I get the error message:
    Firefox.exe – Entry Point Not found
    The procedure entry point ?DllBlocklist_Initialize@@YAXXZ could not be located in the dynamic link library T:\PQligP sFuvy (X86)\pJPpSox HneiCFv\GwCMqTQ.Oqt.
    I tried uninstalling Firefox 27 completely and reinstalling it, and the error is still there. When I uninstall V27 and install the older V26 the error disappears. Id there an issue with V27 trying to work with links from Thunderbird?
    I am on a laptop running Windows 8.1 with all current downloads.

    Thanks for the reply - as best as I can tell it seems to be some kind of incompatibility between Thunderbird V24.3.0 and Firefox V27. If I install Firefox V26 then everything works as it should. I haven't tried installing a previous version of Thunderbird to see if that makes a difference.

  • When I start my laptop I get a message saying,AppleSyncNotifier.exe Entry point not found error.It saysentry pointsqlite3_wal_checkpointcould not be located in the dynamic link library.

    I go to my common files but cannot locate sqlite3dll. Can someone help me its become annoying not being able to resolve it.

    Hi, I get the same error EVERY time iTunes updates.
    I have to do the fix that is suggested in this topic (cut and paste the sqlite3.dll)
    My Question:
    Since this happens every time iTunes updates...... Do I have to remove SQlite3.dll from the "apple application support" folder....... so that the sqlite3.dll is only located in the "mobile device support" folder?????
    It is getting really annoying to have to do the "cut and paste" fix every time iTunes updates.
    Thank You,
    Steve

  • HT1688 I have a PC computer and an I-phone 4s.  I set up an i-tunes acct online w/ icloud.  after a recent update my computer started receiving an error message on start up.  it says "AppleSyncNotifier.exe - Entry Point Not Found".  I click OK and it move

    I have a PC computer and an i-phone 4S.  I set up an i-tunes acct online w/ icloud.  After a recent update my PC started receiving an error message on start up.  It says "AppleSyncNotifier.exe - Entry Point Not Found".  It also says, " The procedure entry point smlTextreaderConstName could not be located in the dynamic link library libxml2.dll".  I click on OK and it moves on.  It doesn't seem to affect my computer, but it's annoying.  Any ideas on correcting this?

    UPDATE - (Made a second post so it'd be clearer)
    I uninstalled Office 2003, then iTunes, then all of the associated software (Mobile Device Support, Apple Update, Quicktime, EVERYTHING)
    Reinstalled Office 2003, then Office 2003's Service Pack 3, then all Microsoft Updates for Office 2003. Then I configured a blank Outlook profile, no data other than the IMAP info for my .Mac/Me account. Then I downloaded (didn't used my existing copy) of iTunes 7.7 and reinstalled. Sync'd phone. Changed MobileMe settings. Told it to sync contacts and calendar with Outlook. It warned me because it was the first sync. Told it to take ALL of the MobileMe data and replace the data on the computer (which was blank.) NOTHING showed up in Outlook. When I tell it to sync Contacts with the Windows Address Book, it works fine.
    In Conclusion, it still won't sync with Outlook, when it's set to Sync with Outlook I still get the annoying MAPI errors. So I switched to to Sync the Contacts with the Windows Address Book, and I'm backing up my WAB file now with my nightly backups.
    I suppose we'll see if it gets fixed when I format/reinstall on Vista Ultimate in the next month or two. If anyone has any suggestions, I'm open and willing to try them.
    On a completely unproductive note: Despite my love for Exchange, I hate MAPI.

  • How do I eliminate the message when starting up PC - Apple Sync Notifier.exe – Entry Point Not Found – The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.

    Getting the massage when starting up PC - Apple Sync Notifier.exe - Entry Point Not Found - The procedure entry point sqlite_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.  How do I eliminate this message?

    I'd first try uninstalling and reinstalling your MobileMe control panel, dc. Does that clear the message up?

  • After installing the current version of iTunes, I get an AppleSyncNotifier.exe - Entry Point Not Found error. It says "The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll."

    After installing the current version of iTunes, I get an AppleSyncNotifier.exe - Entry Point Not Found error. It says "The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll." Kindly advice a process to get rid of this error, without losing my files on the iTunes.

    Hi, I get the same error EVERY time iTunes updates.
    I have to do the fix that is suggested in this topic (cut and paste the sqlite3.dll)
    My Question:
    Since this happens every time iTunes updates...... Do I have to remove SQlite3.dll from the "apple application support" folder....... so that the sqlite3.dll is only located in the "mobile device support" folder?????
    It is getting really annoying to have to do the "cut and paste" fix every time iTunes updates.
    Thank You,
    Steve

  • Error messages - DDE Server Windows itunes.exe - Entry point Not found and iTunesHelper.exe - The procedure entry point asl_add_log_file could not be located in the dynamic link Library ASL.dll

    Hi
            I have tried to research these problems I am getting, but have not been able to resolve them.
    1st is the above DDE Server Windows iTunes.exe - entry point not found.
    This only occurs when I try to start iTunes.
    if I click ok , several times, iTunes will start but slowly.
    If at any time I have to reboot my computer I get
    iTunesHelper.exe - the procedure entry point asl_add_log_file could not be located in the dynamic link library ASL.dll
    if I click 3 times OK it goes away.
    To this end I have uninstalled iTunes and rebooted my machine then gone to iTunes web site and downloaded the latest version.
    Installing it but still get the same errors on reboot and trying to run iTunes
    Anyone any ideas please.
    I have a self build PC it has an Intel core 2 quad Q6000 @ 2.40GHz
    Ram 4.00GB
    32bit OS
    Windows 7 Ultimate SP1
    Firewall - Zonealarm
    Virus   -  Zonealarm
    Thanks in advance
    Steve
    Message was edited by: Ybslik
    Message was edited by: Ybslik

    Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
    Let's try something relatively simple first. Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
    If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
    Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

  • HT1349 When my computer comes up, I always get this error message.  AppleSyncNotifier.exe entry point not found. SqLite3_wal_CheckPoint could not be located in the dynamic link library SQLite..dll.  What should I do?

    When I start up my PC I get the following message.  Apple Sync Notifier.exe entry point not found. Sqlite3_wal_checkpoint could not be locatedin the dynamic link library SQLite3.dll.  What do I need to do to correct this?

    See Troubleshooting issues with iTunes for Windows updates.
    Try the repair tip in the third box first.
    tt2

  • What is this dialogue message -  AppleSync Notifier.exe-Entry Point not found?

    I need help to understand this dialogue box that appeared each time I powered on my computer -
    "AppleSync Notifier.exe-Entry Point not found" The proedure entry point sqlite3.wal_checkpoint cold ot be located in the dynamic link library SGLite3.dll.
    This message appeared after I downloaded the latest version of the iTune into my laptop Windows 7 Home edition.
    Did I download the version wrongly?
    Will this affect the sync process of my iPhone?
    Please help
    Thank you

    Also I now can`t access any of my itunes library and am concerned that if I remove it from my computer I will lose everything as I have no option of accessing and therefore backing anything up. Any ideas?

  • When I allowed an upgrade to Itunes on my HP Windows 7 computer now I have this error message when I turn on my computer:  AppleSyncNotifier.exe-Entry Point Not Found.  The the explanation in the dialogue box says:  The procedure entry point sqlite3_wal_

    Error message after allowing an upgrade:My dialogue box in the error message says:  The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll--this happened after I allowed an upgrade to be installed.  I have HP Windows 7.  Now my Iphone will not sync.  What do I do?

    Found this fix here which worked for me with a similar problem.
    https://discussions.apple.com/thread/3196594?start=0&tstart=0
    With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
    Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
    Reboot and see if all is well.

  • Applemobiledevicehelper.exe entry point not found

    When opening itunes on my pc, I get the error message :The procedure entry point_objc_load_image could not be located in the dynamic link library objc.dll

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • When starting up my computer, I get a window that says - apple sync notifier.exe - entry point not found.  how can i get rid of this window?

    When I start up my computer,  I get a window that pops up that says  *  AppleSyncNotifier.exe - entry point not found.  it also says    the procedure entry point xmltextreadername could not be located in the dynamic link library libxml2 .dll.   .  What does this mean and how can I get rid of it?

    With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
    Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
    Restart the programme all should be well
    In case that your OS is (64 bit)
    1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    2. Copy file "SQLite3.dll"
    3. Now paste it in the folder  C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
    4. Restart the programme, it should not display that message, it should be clear.
    Good Luck

  • When I start my computer the following error: AppleSyncNotifier.exe Entry Point Not Found Procedure entry point xmlTextReaderName could not be located in the dynamic link library libxml2.dll

    After updating to iTunes version 10.5, every time I start the computer the following error message appears: AppleSyncNotifier.exe - Entry Point Not Found. Procedure entry point xmlTextReaderName could not be located in the dynamic link library libxml2.dll? Please help

    Thank you Allan123.
    I have used iTunes 10.5.1 for a while without any problem but the other day I installed an application that wanted to restart my computer and iTunes did probably not shut down properly which probably caused the problems. I had to search for libxml2.dll though. Two other programs on my PC used a with the same name but I copied the one from the an Apple folder of course and pasted it where u suggested and after that everything was fine. I have no idea why this problem really occured without any real reason. But thanks for the solution!

  • How do I fix 'iTunes.exe - Entry Point Not Found'?

    I have tried to open up iTunes, but everytime I do it pops up, "iTunes.exe Entry Point Not Found" and then says, "The procedure entry point AVCFPlayerEnableHardwareAccerleratedVideoDecoderKey could not be located in the dynamic link library AVFoundationCF.dlll." Can someone please tell em how to fix this?

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

Maybe you are looking for

  • Weblogic 10.0 and Log4j classpath problem

    My applications were working fine in WLS 9 but when I upgaded to WLS 10 I started getting log4j configuration and resource finding errors. Basically, if I do a "Logger.class.getClassLoader().getResourceAsStream(file)" I get a null pointer excep. bec.

  • Share contents disappear

    All, Here's my setup: Windows 2008 AD Windows 2008 File Cluster Mac OS X 10.5.5 client bound to AD with Apple AD-plugin I have my client successfully bound to the AD domain for authentication and network home directories. I also have force local home

  • UPGRADE REQUEST ACROBAT X1 standard 10.1.6 to 11.x

    A week ago I just bought a new laptop with Acrobat X1 Standard 10.1.6 installed (OEM). I'd like to upgrade to 11.x. How can this be done? The laptop came with the 10.1.6 version pre-installed and the install CD was not included, just the "certificate

  • J2EE engine not getting started

    Hi All, My J2ee engine isnt getting started. When i check the logs, i see the following error, Error occurred while preloading classes of security providers from jre/lib/ext folder: java.util.zip.ZipException: The filename, directory name, or volume

  • PO Upload

    Hi Experts! My clients want to upload all the POs in the SAP System . thease are around 50000 Entries.......... How can I do this .....how can i use here LSMW--- Please tell me all steps are required This is very urgent ... Please revert me ASAP Rega