When closing Firefox, I get an application error message saying the instruction at "0x100f2eaa" referenced memory at "0x00000024", the memory could not be "read". Check on ok to terminate the program. What's up?
Don't know that this is causing problems during utilization of Firefox but it's been happening for awhile. Seems to only pop up when I exit the internet.
Hi Ayaz_Shaikh,
What’s your host OS?
Do you install Windows 10 Technical Preview in Hyper-V? Or some else virtualization products?
Alex Zhao
TechNet Community Support
Similar Messages
-
the other day i did the windows 2008 R2 Rebooting
Explorer exe. Application error" it says "The instruction at 0xf6628a87 referenced memory at 0x00000000 The Memory could not be read Click on OK to terminate the program
i just get this error message. If it is anything serious, there is nothing I can do.
the 2008R2 OS was hang out of control
what is a major cause of error message? is there any fix or Hotfix?Hi,
Regarding the current issue, it may be caused by some third party software conflicting with explorer.exe or it could be a memory conflict with a driver.
Signs of low memory include poor performance, low-memory or out-of-memory notifications, and display problems. I would suggest you to follow the steps provided in these methods and check if
it helps in resolving the issue:
Method 1: Run System Maintenance troubleshooter:
Step 1 : Move your mouse to the right bottom and click on search.
Step 2 : Type Troubleshooting in the search box and click on it
Step 3 : On left pane click “View all” click on the "Run Maintenance task" under the System and Security.
Step 4 : Click on the "Next" in the System Maintenance interface.
Select "Try troubleshooting as an administrator
Method 2:
I would suggest you to run the Memory Diagnostic Tool and check if it helps.
a) Press
Windows key and type "memory".
b) Click "Settings" and then click the result "Diagnose your computer's memory problems".
c) Select the recommended option to run the tool.
Check if the issue still persists. If the issue persists, increase the virtual memory.
Change the size of virtual memory
http://windows.microsoft.com/en-in/windows-8/change-the-size-of-virtual-memory
Method 3: I would suggest you to run System File Checker tool (SFC.exe) and check if it helps. The System
File Checker tool (SFC.exe) scans for missing or corrupted system files and repairs them.
Run System File checker to see if you have any corrupted system files.
Use the System File Checker tool to repair missing or corrupted system files
http://support.microsoft.com/kb/929833/en-us
Method 4: If issue persists follow these steps:
I would also suggest you to check if the same issue occur in Safe Mode and check if the issue occurs there as well.
Step 1:
Start your computer in safe mode
http://windows.microsoft.com/en-US/windows-8/windows-startup-settings-including-safe-mode
Step 2:
Follow the Microsoft KB article to perform clean boot on the computer. A clean boot helps eliminate software conflicts.
How to perform a clean boot in Windows 8.1, Windows 8, Windows 7, or Windows Vista
http://support.microsoft.com/kb/929135
Disclaimer: After you have finished troubleshooting, follow these steps from section “How to
reset the computer to start as usual after clean boot troubleshooting” to reset the computer to start as usual.
Hope this helps.
Best Regards,
Andy Qi
Andy Qi
TechNet Community Support -
i have already tried to uninstall firefox then reinstall it but i still get the same problem..
this is the picture of the window popping up every time i close Fire Fox.. i hope you can help since it already begins to irritate me..thanks!
http://i167.photobucket.com/albums/u152/kcirtap198/Firefox.jpgAre you installing in Desktop mode? I think you need to, unless things have recently changed in W8.
-
Trying to connect to DB2 database....get windows Application error message
Hello,
I have just started using JDBC and I am trying to connect to a DB2 db from my pc. The program I have written compiles ok but when I try to run the program I get a windows error:
java.exe - Application error
The instruction at "0x10009f62" referenced memory at "0x0000001c". The memory could not be "read".
Click OK to terminate the program.
Click CANCEL to debug the program.
I am using Windows2000 and DB2 v6.1.0 is installed on my laptop.
The program I am trying to run is as follows:
//Class to load jdbc driver and test connectivity to DB
import java.io.*;
import java.util.*;
import java.sql.*;
//Dynamic SQL application using jdbc
//example taken from Don Chamberlain's book, page 504
//Adjusted for reptest DB
public class Test{
//Register the jdbc driver
static{
try{
Class.forName("COM.ibm.db2.jdbc.app.DB2Driver");
}//ends try
catch (Exception e){
System.out.println("Error registering the jdbc driver");
e.printStackTrace();
}//ends catch
}//ends static
public static void main(String args[]){
//try catch block, Create a Connection object and use it to connect to the DB and turn autocommit off
//The DB is identified by a URl that begins with "jdbc:db2" followed by the DB name
try{
String dbname = "dbname";
String userid = "uid";
String pw = "password";
String url = "jdbc:db2:" + dbname;
Connection con = DriverManager.getConnection(url, userid, pw);
con.setAutoCommit(false);
//Simple select statement
Statement stmt = con.createStatement();
ResultSet rs = stmt.executeQuery("SELECT problem_id" + "FROM problems" + "WHERE problem_id = 2002219");
System.out.println(rs.getString(1));
}//end try
//General purpose exception
catch(Exception e){
System.out.println("Error");
e.printStackTrace();
}//ends outer catch
System.out.println("Successful");
}//ends main
}//ends class
I'd appreciate any help. Thanks , AliHello,
This is because of the DB2Java.zip file, what i did is unzip the file into a temp folder then make a jar using jar -cvf DB2java.jar COM
(COM is important)now you can see jar file is created. you have to use this jar file in your classpath it works fine,
That's all it works for me.
Thanks for somebody placed in the java forum.
Cheers
Bala -
when i connect my iphone 4,an error message saying usb device is malfunctioning is appearing...can anyone give me a solution for this?i tried using on a different pc.but still get the same result..
First thing i would try is to use another cable if available.
-
When I turn on my computer, an error message says "AppleSyncNotifier.exe-entry point not found. The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll" Cannot access itunes store, sync phone, etc. Two weeks ago did this and Apple support had me remove and reinstall iTunes. Doing it again. Help....
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the libmxl2.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "libxml2.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "libxml2.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck -
When capturing images from a Nikon D600, they show in Bridge, but when clicked to load into CS6,an error message says that it is the wrong type of document, evne jpeg files. This is a NEW frustration.
Nikon raw files would open up in Adobe Camera Raw and so should jpegs.
If you select one in Bridge and give the command "Ctrl r" (Windows), what happens?
Also what is the version of ACR in the title bar?
Gene
Note: unmark your question as "answered". the green balloon next to the subject shows it as "solved". -
I keep getting an error message saying "This iPod cannot be used because Apple Mobile Device service is not started" and i have no idea what that means so any help will be much appreciated, i just want to add more of my music on it
I got that message yesterday. I'm new at this so don't know if this is the correct solution but it worked for me. I reset my iPod by holding the 2 buttons down until the apple appears AND I restarted my computer. After that everything worked.
-
Hi all,
I have an iMovie project in iMovie HD 6.0.3. (Mac OS 10.5.8)
It plays, but I cannot copy the file (including saving it to a flash drive). I get either a message
"the finder cannot complete the operation because some data in [name of
iMovie file] could not be read or written (Error Code 26)" or the
message "A project file is missing. The file [name of the QuickTime
movie inside the project.dv] couldn't be opened and is being skipped."
This happened suddenly, I was able to save a backup version numerous
times while working on the project.
I followed some of Karl Petersen's advise on apple discussions. I opened
the package contents, and everything seems to be there. The source file
(original QuickTime movie) is there and can be opened and played. I
replaced the current project file with the backup in the package
contents, but that did not change anything. I was able to export the
movie timeline into a new project as a single clip, but would like to be
able to copy the current project.
Thanks for any ideas..Make sure all drives are formatted as "Mac OS Extended". (Journalling preferred, but not necessary).
-
I get an Application Error message when installing TestStand 2.0
When installing TestStand 2.0 on a Windows NT 4.0 Workstation, following message appears when installing Engine: Application Error - The instruction at "0x685876b3" referenced memory at "0x685876b3". The memory could not be read.
Hello Eduardo,
This is a strange behavior, and I guess I have a couple of comments. TestStand works fine with Windows NT 4.0 but it needs at least Service Pack 3 installed. So make sure you have the SP installed.
In addition, make sure you use an administrator account when you install TestStand. Finally, you can try to install it on a different computer with the same OS just to make sure the CD is OK. If it works in the other computer, then there is something wrong with the original PC.
Regards,
Roberto Piacentini
Applications Engineer
National Instruments
www.ni.com/support -
When i connect my ipad2 to sync, error message says ipad itunes version needs updated
when I connect my ipad 2 to my mac to sync an error message says my ipad doesn't have the latest version of itunes. When i try to update my ipad, i can't....help
It would be good for you to provide a little more information for us.
What version of the iOS is on your iPad? Did you update to iOS 6?
What version of OSX is your Mac running?
Did you update iTunes to version 10.7
If you have iOS 6 on your iPad you need to have iTunes 10.7 on your Mac before you can sync. iTunes 10.7 requires Mac OSX 10.6.8 (Snow Leopard) or higher.
If you have iOS 6 on your iPad and a version of OSX below 10.6.8 you'll need to update the OSX first, then install iTunes 10.7. If your have OSX 10.6.8 or higher you can just download and install iTunes 10.7.
It would e a good idea to back up all data on your computer if you have to do an update of OSX. -
I was trying to back up/sync my iphone 3GS ut the error message says I can't because Apple Mobile Device Service isn't started. I don't know what thisis. Help.
See Here
AMDS for Mac
http://support.apple.com/kb/ht1747
AMDS for Windows
http://support.apple.com/kb/TS1567 -
when trying to launch iMessage upon turing my computer on, I get the message "internal error has occured, please quit iMessage and try again."
What do I need to do to repair this problem?
Marvin JonesHi Eric,
Side note.
com.apple.iChat.StatusMessages.plist only holds the default and Saved Status Messages.
Deleting it does not effect the running of the app.
Deleting com.apple.ichat.plist first can be the most invasive as you have to reset any Preferences (and some Menu items) that you have changed from defaults
If the person only has an iMessages account deleting the com.apple.imservice.imessages.plist (holds the iMessages ID in Mountain Lion) maybe enough
The account info is held elsewhere but this is read by com.apple.IMAgent.plist to login.
Next try the com.apple.imagent.pist one
As above All the accounts info is held elsewhere but this one is actually handling the logins.
It is of course doing all of then in Messages and FaceTime so it is not a first choice.
Deleting com.apple.imessage.bag.plist can be useful as this has info on the Server your version of Messages is using.
I would delete this along with com.apple.imservice.imessages.plist on a second attempt.
Hope you don't mind me adding the info.
10:00 pm Wednesday; March 5, 2014
iMac 2.5Ghz i5 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
I cannot log into the itunes store. Everytime that I have tried to log in and error message appears and says it cannot perform this task...and when I try to go into the music section of the application it says its not availble in the U.S as this time? Is there any one else having the similar problem?
If you can't send an SMS message, iMessage will NOT be able to activate. It uses SMS to activate it and tie it to your phone number. Contact your carrier about the SMS problem.
-
I got this When I last updated itunes. Can some please help? I cannot open itunes and it is anoying!!!
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2
Maybe you are looking for
-
Using a variable in a js function argument
Folks, This is very basic, but I still cannot get it... I have this js function in an ASP page:function MM_changeProp(objId,x,theProp,theValue) { //v9.0 var obj = null; with (document){ if (getElementById) obj = getElementById(objId); } if (obj
-
I have a 3rd generation, have lost ability to use several apps with new version of itunes. How to correct?
-
Watch ESPN app not working with ATT
for some reason the watch ESPN app is saying that I'm not authorized to view anything through the site. It's not even allowing me to enter my user info, so I'm thinking there is a problem between ATT /the app. This is happening both to my iPhone and
-
How can i use Progress bar in IR Report
Hi , I have created IR Report based on the View so, it's been taking 10-15 mins of time to execute the IR Report. Here user want to see the Progress bar while executing the IR Report. How can i use Progress bar in IR Report. Anybody have idea on Prog
-
Function module to read Purchase Requestions
Hi all, As you must be knowing that in /SAPAPO/RRP3 transaction we can create the Purchase Requisitions. Now my requirement is that I want to read all the Purchase Requisitions from today onwards for all product and location combination. Please sug