When connected to my Ford Mondeo, my ipod nano can be controlled through interface.  But after while it comes up with message 'loading data' and then freezes.  Anyone else got the issue?

When connected to my new Ford Mondeo, my ipod nano can be controlled through user interface in car.  This worksd most of the time, but after a while if I try to change the music or search, it comes up with message 'Loading Data'.  I then have to pull out USB and reinseert, at which point it works again.  Has anyone esle expereinced this/have a solution?

Does not matter if anyone else has this issue.  You need to contact the Ford dealership.  It's their product you are having problems with. 
If you really want to know if anyone else has this issue, post on Ford's Mondeo message boards.  It's where the Ford car owners hang out.

Similar Messages

  • My ipod shuffle 2nd gen suddenly stops playing music after 15-20 mins.First it flashes green light and then flashes red light rapidly. Any solution to this ?

    My ipod shuffle 2nd gen suddenly stops playing music after 15-20 mins.First it flashes green light and then flashes red light rapidly. Any solution to this ?

    A 2nd gen shuffle is about six year old at this point.  The likely cause is a battery that is worn out, with greatly reduced capacity or inability to hold a charge.  The initial green light shows a good charge.  The red light means the battery is drained.
    Since the shuffle still appears in iTunes, you can try doing a Restore in case the cause is related to corrupted software on the shuffle.  The Restore button is on the shuffle's Settings screen in iTunes.  This will erase the shuffle, re-install its software, and set it to default settings.
    Also, when the light becomes red and the shuffle stops playing, try turning OFF the shuffle for at least ten seconds.  Then, turn it back ON.  This resets the shuffle.  Does it play again?  If it does, let it play until it no longer plays again.  Repeat turning it OFF and ON until it no longer plays.  Then, connect it to power and charge it to full.  See if that makes any difference.
    If that does not help, the solution is to replace the battery.  If you have a repair shop do it, the cost is probably uneconomical, compared to the cost of a brand new 4th gen shuffle ($50) that has more features, and a new set of headphones, plus a one-year warranty.
    If you are good at such things, this web site has repair guides
    http://www.ifixit.com/Device/iPod_Shuffle

  • On my mac when i click on pages, a new document doesn't open instantly  but a window with my files open and then  have to click on the left bottom new document in order to open one. How can i have directly a new document when i click on pages icon

    On my mac when i click on pages, a new document doesn't open instantly  but a window with my files open and then  have to click on the left bottom < new document> in order to open one. How can i have directly a new document when i click on pages icon

    How to open an existing Pages document?
    Click Pages icon in the Dock to launch Pages.
    When Pages is open, click File menu in the  Pages menu bar.
    Select “Open”.
    When the select document  dialog box opens up, highlight/select the document and click “Open”
    at the bottom right corner of the dialog box.
    s
    https://support.apple.com/kb/PH15304?locale=en_US

  • HT202157 I just downloaded 5.2 and both my Apple TV shows and movies won't come up. Hulu and Netflix works fine, but when I go to select a purchased move or show through the apple menu, spiral comes up for about 10 seconds and then brings me back to the m

    I just downloaded 5.2 and both my Apple TV shows and movies won't come up. Hulu and Netflix works fine, but when I go to select a purchased move or show through the apple menu, spiral comes up for about 10 seconds and then brings me back to the main page

    StagLemoore wrote:
    Thank you everyone for your suggestions and help.  Ended up logging out of my apple ID account.  Of note, when I did I did a quick test and checked out both the movies and tv show options, and it all worked perfectly.  I then logged back in, and now all my purchased and rentals are available which makes sense.  I guess with the update there was some weird bit of trons that required one to log out then back in.  Probably doing a rest in between may not hurt for some.  Thanks again for all the assistance. Cheers.
    It looks like there is a Apple doc for this problem here -> Apple TV: Unable to access Movies, TV Shows, or other iTunes features after updating

  • Since upgrading to IOS6, my iPad2 won't connect to wifi networks without powering down and restarting. Anyone else having this issue?

    Anyone having issue with IOS6 and connecting to wireless networks?

    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting
    http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet
    http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    Try This - Renew IP Address:
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Has anyone else had the issue of the the screen randomly flashing black only when using Messages app in landscape?

    I have been having an issue with the screen flashing black for several seconds then turning back on. This olny occurs in the Messages app and only in landscape mode. I have never noticed the issue in any other app. The issue is 100% repeatable. Has anyone else had this issue or know of any solutions to what seems to be a bug?
    -iPhone 5s running iOS 7.1
    KCM

    I think this is an issue with the phone's proximity sensor (the one that turns the screen off when you hold it up to your ear). It's a bug that seems to occur when you switch to another app (any app) while still on a phone call. You'll notice in Messages that the screen goes dark when you move your thumb over the earpiece/iSight camera, but not when you move your other thumb.
    Simplest solution is to force-quit the Messages app (double-click the home button, and swipe up on the app). The problem should resolve itself when you restart Messages.

  • Cannot connect iphone 5 to Parrot, battery is terrible and volumes are low? Anyone else got the same issues?

    so these seem to be my issues with the phone so far. no matter what i try with my Parrot handsfree the phone will not connect. The general volumes of the phone seem lower than the iphone4, especially when using the new earphones. And i cant say im that impressed with the battery life. Today i made 2 phone calls, updated a facebook status and listened to one album on spotify, this resulting in a pretty much dead battery? doesnt seem right to me considering apple advertised the battery life being able to handle many hours of youtube streaming over 3G?

    Ok, this is good info. It means that right now Apache is not able to serve content outside of your machine. That's why even the native browser can't see your site. Once we get that problem solved you should be able to see the site in Edge Inspect as well.
    Here's some things to try:
    This might be because your firewall is blocking port 8888. Try turning off your firewall temporarily and see if http://192.168.2.4:8888/yogaFest2013/  works from the native browser on your device
    Open a terminal window and type in the following: netstat -an | grep "LISTEN" and let me know what it says
    Open your httpd.conf file and look for a section like this:
    # Listen: Allows you to bind Apache to specific IP addresses and/or
    # ports, instead of the default. See also the <VirtualHost>
    # directive.
    # Change this to Listen on specific IP addresses as shown below to
    # prevent Apache from glomming onto all bound IP addresses.
    Listen 80
    Let me know what your's looks like.

  • Ever since I installed Lion my internet connection comes and goes, has anyone else had the same experience. have rung Apple Care and they have reset my connection but it is still happening

    ever since I installed Lion my internet connection comes and goes....have reported this to Apple Care who have helped me reset my connection but it is still happening...cant believe it is a fault of the ISP as my Iphone does not have this problem, nor does my PC laptop...is this a fault in the new system?

    Thanks so much but none of that helped.  It was driving me crazy because it would back up another external drive.  I just changed the name of the drive from iPhoto/iTunes Library to Media Libraries and IT WORKED!! I guess for some reason it didn't like the drive being called iPhoto or iTunes ???? I don't understand but I have tried so many solutions and exchanging things out but the name change did it????!!!
    Thank you for your help and replying to this.  Guess I made my own issue!

  • When I go to hotmail the site comes on it says loading friends and then a page full of words come on, can not log into hotmail

    When I go to hotmail.com the website comes on fine, to the right it says loading messenger friends, it stays like that for a min. then a page full of words come on screen like programing info. I have no problem with IE or Google Chrome

    Reload web page(s) and bypass the cache.
    * Press and hold Shift and left-click the Reload button.
    * Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    * Press "Cmd + Shift + R" (MAC)
    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    * Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    * Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • Bought a used imac 21.5 I5, and the owner cleaned his stuff off the HD, when i turned it on, it comes up with a gray screen, and, no way to get on the internet, to download OS X

    used imac starts up with a gray screen

    You will need to purchase a retail OS X install disc.
    You can Purchase OS X 10.6 Snow Leopard here.
    http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard.
    While you are ordering this, call Apple at 1-800-MYAPPLE and ask for retail software sales and tell them you need a set of original OS system discs for your iMac.
    You'll need to give them your iMac's serial number to obtain these. There will be a small, but minimum charge for obtaining and shipping of these discs.
    Good Luck!

  • IPod Nano 4th Gen shows in Finder, but not under Devices in iTunes with Mac OS

    Please Help. I see the disk on my desktop, it's on Finder, but it doesn't appear in iTunes

    iPod not recognized in iTunes and Mac desktop

  • My ipod nano can't stop rebooting !

    So I got my ipod nano a few years ago and I had a different laptop back then and I uploaded my music on that laptop with itunes.
    I got a new laptop but I never plugged my ipod nano into it. A few weeks ago I did and it was working fine when i plugged it in except i  was having a hard time putting new music on my ipod nano (that computer is more used to my iphone  being plugged in) Finally when I thought I got the new music on the ipod, I unplugged it and gave it to my mom (who has recently been using it). But then suddenly the ipod turned off and it went to its rebooting screen (all black with the apple in the center). I have tried restarting it but all it does is turn the screen black for a few seconds and then  it's frozen on the rebooting screen.
    So I have tried pressing the menu and the center button at the same time to restart it-Doesn't work
    I've plugged it into my new laptop after that and it connected! and it asked if I would like to fix the problems on my ipod and it went onto restoring my ipod for a few minutes with the screen on my ipod white with a flashing "Do Not Disconnect' message. But when I came back to it 3 minutes later it was back to its rebooting screen, same as before.
    I tried reconnecting it to my laptop but it does not connect! So I don't know how to unfreeze my ipod nano, I don't care if I have to start completely over with all my data gone, I just want it to unfreeze and go back to normal!

    Try restoring your ipod touch by putting it in to DFU mode by following these steps http://www.iclarified.com/entry/index.php?enid=1034

  • When i hold down command and r at the same time after restarting it comes up with a

    When i hold down command and r at the same time after restarting it comes up with a black screen and a lock symbol and a field bellow where you would input a password, i have tried ALL of my possible passwords including my password i use for the mac and it stil will not work! all that happens is the text i put in bellow erases itself after hiting enter or clicking the arrow.

    I've tried my apple ID password and that doesn't work either . I don't recall seting a password for an encrypted disk either :/ if it was for an encrypted disk, would it be in keychain anywhere? if so how can i find it?
    Thanks!

  • My Macbook pro randomly shut off. When i hit the power button, i can hear it start up, but after a click sound, it stops booting up.  help?

    My Macbook pro randomly shut off. When i hit the power button, i can hear it start up, but after a click sound, it stops booting up.  help?

    Hi..
    Try Resetting the System Management Controller (SMC)
    If that doesn't help, try Troubleshooting MagSafe adapters
    When you post, please tell us which Mac OS X you have installed. Thanks 

  • My ipod touch 5 wount let me back in after trying to update ios with my computer and now says connect to itunes. it still wount work when i plug it in and click restore for it?

    my ipod touch 5 wount let me back in after trying to update ios with my computer and now says connect to itunes. it still wount work when i plug it in and click restore for it?

    it went through the extracting software stage but then an error message saying that it encountered problems came up and it didn't restore.

Maybe you are looking for

  • Creation of Universe based on Hana OLAP connection

    I have to create a universe in IDT 4.1 sp2 based on SAP HANA OLAP connection ? How can i access SAP HANA view which was created using OLAP connection in Business objects Explorer? It does not allow creating Universe on top of SAP HANA OLAP connection

  • Spark datagrid item editor font see through

    I am using a default item editor on a spark datagrid. When the user attempts to edit the field the old value shows through. How do I get rid of this? I am using out of the box stuff? Is this a listed bug? Code is... <s:GridColumn dataField="Actual" h

  • Unauthorized User can see the aggregated result?

    Dear all, I got a problem that, unauthorized user can see the aggregated result. e.g. A user who is allowed to read data of Sales Office (0SALES_OFF) 0001 only. (It is done in the RSECADMIN already) Now a cube contains Sales records of Sales office 0

  • PO Sending via mail

    Dear All, Need to send PO as PDF document via mail to the vendor, kindly send the step by step procedure with T. Code. Rgds Srinivasan

  • More log writer contention when using JDBC Batch Updates?

    So if I'm already seeing log writer contention when I'm commiting inserts one row at a time. Why would I see even more contention of log writer ie. commit waits in Enterprise Manager when I batch these inserts using JDBC updates. Today I observed sig