When connected, where does the iPod appear in My Computer?

My iPod is not registering on either the updater or iTunes. As of now, I'm trying to figure out of its present on my computer, but I'm not sure where to locate it.
iPod Video - 5th Generation   Windows XP  

Check your device table or computer management. I am having a similar problem. it shows up in the device table with an X on.

Similar Messages

  • When I click on the IPOD icon in my computer,

    When I click on the IPOD icon in my computer, it doesn't show the folder that contains my music files.  I want to get in there and delete some music, why can't I see the files?

    Because you're supposed to do that through iTunes and not manually.
    (85116)

  • While updating Ipod we now have a blank screen and when connecting to itunes the ipod is not showing under devices

    While updating ipod touch we now have a blank screen. I have updated itunes but am unable to sync because the ipod does not show under devices. I have tried shuttng down and restarting but only have a blank screen or ap0ple logo. Sometimes the screen shows connect to itunes but that has been it.

    I have the same problem, after upgrading my itouch to iOS6, it doesNOT respond to anything, apple logo stays on the screen all the time and does NOTHING! restore does not work either.... i hope we can get an answer from someone soon... apple support did not have an asnwer.

  • Where does the Ipod Maps App get its location from?

      Mine thinks it is in Queensland but it is in Victoria

    Location on the iPOd is determined by the location of a nearby wifi router that is in Apple's database of routers and their location.  The iPod does not have to be connected to the router, just within rage.  As of yet, nobody seems to know how to add to or correct Apple's database.

  • When I right-click a page and select 'copy' where does the copy go on my computer?

    I'm just trying to copy the page but I don't know where it goes. I'm assuming that's what the copy function is for?

    Copy means to copy something to the clipboard. If there's any selected text, for instance, that text will copied. Depending on where you click, you can copy images and links to the clipboard.
    To copy a page to your disc drive, you use the Save Page As... function on the right click menu.
    Note that you will not see the Save Page function on the right click menu if any text is selected (highlighted) on the page or if you right click on an image.

  • HT1498 Where does the confirmation message appear?

    The rental instruction article is not very clear without visual cues or elaboration.  When and where does the confirmation message appear after renting a movie?  Do I have to keep my Apple TV on while waiting for the confirmation?  Also, my movie "top shelf," that the article refers to, is crowded with advertisements or movies with numbers under them (which I have not rented), depending on what the writer means by the "top shelf."  Sheesh.

    Your 'question' is rater unclear but here. Go watch this video, around the 5:10 mark you might get your answers, if what you're asking is how to rent a movie.
    http://www.youtube.com/watch?v=i_GUuJyyyRQ

  • TS1363 Ipod does not appear in my computer or recognized in itunes. When ipod is connected a window pos up aking to import photos off the device and when this is closed the ipod cannot be recognized. Any Help?

    Ipod does not appear in my computer or recognized in itunes. When ipod is connected a window pos up aking to import photos off the device and when this is closed the ipod cannot be recognized. Any Help?

    Which OS are you using? 
    In the meantime, research your problem in Knowledge Base. 

  • My iPod touch is frozen and asking me to connect to iTunes and when I do connect to iTunes the iPod does not show up. What can I do?

    My iPod touch is frozen and asking me to connect to iTunes and when I do connect to iTunes the iPod does not show up. What can I do?

    Try placing in DFU mode and then restoring.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    Last, try restoring on another computer.

  • When Ipod is connected to Itunes all music can be seen, but when disconnected, the ipod appears as if there is no music.  Hasn't happened to the movies. Help?

    When Ipod is connected to Itunes, music that is used to have is listed, but, when disconnected, the ipod appears as if there is no music.  Hasn't happened to the movies. Anyone have any ideas?

    Since you did not mentioned about sync issues or problem, error messages.
    You have to Sync the iTunes library with your iPod.
    Refer to this tutorial, on syncing iPod
    Have a nice day!

  • Ipod restore failed  can see on the screen is the cable connection symbom and the ipod does not appear in the LH panel of itunes is there an easy solution to this

    ipod restore failed  can see on the screen is the cable connection symbom and the ipod does not appear in the LH panel of itunes is there an easy solution to this

    To get iTunes to see your iPod try:
    - Placing the iPod in recovery mode.  See:
    iPhone and iPod touch: Unable to update or restore
    - Placing it in recovery DFU mode:
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - Sometimes this program will get th iPod in recovery mode:
    RecBoot iPod-1.0.2-Mac-Jaxov.zip - File Shared from Box.net - Free Online File Storage

  • Am having major issues! this does not work i dont understand..does the ipod have to be off while pressing the buttons if so how is it possible if it is connected to the computer either way it turns on..and when i tried these steps while the ipod was on it

    i am having major issues! this does not work i dont understand..does the ipod have to be off while pressing the buttons if so how is it possible if it is connected to the computer either way it turns on..and when i tried these steps while the ipod was on it still doesnt  work it just asks me “slide to power off” please someone help me i just cant seem to put my ipod in DFU mode

    To get the iPod in recovery mode and DFU mode you first have to turn the iPod off.
    Just what is the problem you are tying to resolve?
    Sometimes you have to let the battery fully drain if you can't turn the iPod off. After charging for at least hour try again.

  • Why does the iPod duplicate songs when updating my playlists?

    Why does the iPod duplicate songs when updating my playlists? Also, you cannot use the "show duplicate songs" feature on the iPod - I suppose that is because it is not supposed to duplicate songs on the iPod. But, if that is the case - why does it do it?

    Try resetting your iPod, press and hold the power and the home buttons together approximately 15 seconds until the Apple logo appears. If that does not work try going into Settings>General>Reset>Reset All Settings. If that does not work try connecting to you iTunes library via the cable and un-sync the library from your iPod then sync the library.  For the next 2 options backup your iPod first, then do a Restore iPod from backup, if that doesn't work... As a last resort Restore your iPod as New. I too had the red circle and square after updating to 7.0.4 the last resort fixed mine, others have reported doing all the above, all have had reports of fixing the problem and not fixing it. Give it a try, hopefully one of these works, Good luck.

  • Hi um i have the ipod 5 and my computer seems to be fine with the wifi but when i pressed wifi and my wifi does not pop up it i put it on airplane mode reset the  networks erased my safari history . and it still has not read my wireless internet ?

    hi um i have the ipod 5 and my computer seems to be fine with the wifi but when i pressed wifi and my wifi does not pop up it i put it on airplane mode reset the  networks erased my safari history . and it still has not read my wireless internet ?

    If not:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    One user reported that placing the iPod in the freezer fixed the problem. A trick that works frequently with iPhones:
    Settings > AirPlane Mode ON, Do Not Disturb ON
    Power down and wait 5-10 minutes
    Power up
    Settings > AirPlane Mode OFF, Do Not Disturb OFF
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar
    Then:
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • Ipod appear in my computer when disconnected, doesn't appear when connected?

    It's impossible to add songs to my ipod because when i connect the ipod the taskbar says it's connects however it doesn't appear in itunes or in "my computer". In addition to that it takes million and a half years to eject it from the task bar. I've managed to disconnect it properly maybe twice. at first i thought it was that the drivers need to be reinstalled. but after waiting for an entire day for it to respond i disconnected it improperly and suddenly the ipod icon appeared in my computer and actually stayed there for a while while the ipod was disconnected. as soon as i reconnect it the ipod disappears. im thinking the computer is slow to respond to it since it immediately opens itunes when i disconnect it after waiting for hours.

    The USB host controller maybe hung by the Antivirus or a slow CPU, with low RAM.
    Antivirus has a tendency to freeze iTunes sync Operation with iPod Classic, causing a timeout, which corrupt your iPod filesystem, so when iTunes can't read the iPod, it is pointing to this problem. Other causes is when your iPod hardisk is dying, or your battery is dying causing hardisk crashes.
    My suggestion.
    Connect your iPod to the PC and run chkdsk, to fix any iPod diskerror, then disconnect it, after chkdsk complete.
    Disconnect your PC from Internet. (just to make sure no nasties creep into your system while you syncing.
    Stop the Antivirus program
    Connect your iPod to the PC, using a high speed USB 2.0 port at the back of your PC. (don't use USB hub or the USB port at the front of your PC).
    When iTunes Open up, Restore your iPod please, this is for iTunes to map correctly, to fix the corrupted filesystem.
    When Restore complete, eject the iPod and reconnect again.
    Sync your ipod, preferably manually Manage in small batches and disconnect after every batch, to check that all is well.
    When all sync is complete, and iPod disconnected, start back your Antivirus and connect back the Internet.
    Good Luck!

  • Where does the processing take place when using a remote front panel?

    Hi,
    I am considering upgrading my LabView software from 6i to 6.1 for the new "two click" remote front panel feature. I have already seen a demo of this feature but have just a few questions before I get the upgrade:
    My setup consists of several pieces of equipment connected to Labview via GPIB, to aid in the evaluation of a new microchip.
    1. I wish to grant control of the setup to anyone with a web browser, Is the remote monitoring feature compatible with both Netscape and IE?
    2. The VI which controls the setup is currently located on the PC beside my setup. When I embed a VI in a remote front panel, where does the processing take place, is the local VI still controlling the setup? and
    the remote panel just sending and receiving data from the local VI.
    Thanks, Troy

    > I am considering upgrading my LabView software from 6i to 6.1 for the
    > new "two click" remote front panel feature. I have already seen a demo
    > of this feature but have just a few questions before I get the
    > upgrade:
    >
    > My setup consists of several pieces of equipment connected to Labview
    > via GPIB, to aid in the evaluation of a new microchip.
    >
    > 1. I wish to grant control of the setup to anyone with a web browser,
    > Is the remote monitoring feature compatible with both Netscape and IE?
    >
    Yes. Provided they are resonably modern versions.
    > 2. The VI which controls the setup is currently located on the PC
    > beside my setup. When I embed a VI in a remote front panel, where does
    > the processing take place, is the local VI still controlling the
    >
    setup? and the remote panel just sending and receiving data from the
    > local VI.
    >
    The computer which we refer to as the server, the one with the GPIB card
    in your case, will execute as it does now. In fact, its window will
    even be open. The remote client computer, the one with the web browser
    will be running the runtime engine and processing user events, value
    change and property/method events from the server. So in reality, both
    computers will be sharing the load a bit. This allows for very small
    packets to be sent between the computers. It is in fact quite similar
    to publishing the data between the computers using datasocket.
    One thing to keep in mind. Standard LV includes a license for one
    connection. If you want to allow for multiple web browsers to view at
    the same time, additional licenses are available. Also, only one user,
    remote or server may be in control of the panel at a time. That means
    that if you want to be able to operate the panel, changing kn
    obs or
    flipping switches, the others will become viewers only until you give up
    control. Hopefully this isn't a surprise, but I thought you might want
    to hear about it now.
    Greg McKaskle

Maybe you are looking for