When connecting an HDMI adapter I get the message This device is not supported by this ipad

WWhen I connect the adapter vis an HDMI cable to my TV, I see the image of my IPad then I get the error message about not supported and the TV displays No Signal. I have a multifunction adapter that works although the connection on it is fiddly. I Use an IPad 2 with the latest version of IOS .

Howdy Gdad_Edw,
Welcome to Apple Support Communities.
Take a look at the article linked below, it provides information and troubleshooting tips that can help you resolve the no video issue with your Apple Digital AV Adapter and your iPad.
About Apple Digital AV Adapters for iPhone, iPad, and iPod touch - Apple Support
Troubleshooting
If you encounter an issue using the Apple Digital AV Adapter or VGA Adapter:
Disconnect and reconnect the adapter from the iOS device and display.
Connect directly to the TV, projector, or external display using a known-good VGA or HDMI cable.
Remove any VGA or HDMI extension cables or converters.
Note that accessories that convert a VGA or HDMI signal to other video formats (DVI, Composite, Component) are not supported.
Ensure that you are using the latest version of iOS. Some Apple Digital AV Adapters require iOS 5.1 or later.
Ciao,
-Jason

Similar Messages

When trying to play videos I get the message "requested URL is not supported on this network" how do I fix this?

I receive the error "requested URL is not supported on this network" when trying to play videos on my iPhone. Can you please advise how to fix this problem?

Hi,
You will need to re-instal iCal as an optional install from your OSX installer DVDs. Then run the Mac OS X 10.5.8 Combo Update.
Best wishes

When connect ipad to laptop get the message, "This Ipad cannot be used because the Apple mobile device service is not stated" what do I do?

when connect ipad to laptop get the message, "This Ipad cannot be used because the Apple mobile device service is not stated" what do I do?

See Here http://support.apple.com/kb/TS1567

I've just upgraded to OS 10.8.6. Now when I try to export an ipages 09 document to .doc, I get the message "character borders are not supported and were removed," and the file is saved as .pages.

I've just upgraded to OS 10.8.6. Now when I try to export an ipages 09 document to .doc, I get the message "character borders are not supported and were removed," and the file is saved as .pages.

I think you would get more expert advice if you asked this in the iWork forum - its really an iWork question
G

When I try to sync i get the message "original file could not be found. What does that mean?

When I try to sync i get the message "original file could not be found. What does that mean?
Have i lost all the music on my computer?

iTunes' library keeps track of where your tracks are located. If you move a track, or keep your music on an external drive and don't turn it on before starting iTunes, or your computer's file system becomes corrupted, or iTunes' library gets corrupted, or..., then iTunes goes to where it thinks the file is located, can't find it, and you get !

Have FF 15.0. When I open FF I always get following message: Norton Cofidential does not support FF 1.5, as if I have 1.5. What's up?

I have FF 15.0. When I open FF I always get following message: Norton Confidential does not support FF 1.5, as if I have 1.5. How do I fix this. Do I not have a secure site?

It is most likely because Firefox 15 is in beta, so norton hasn't added full support for it yet. I'd except them to update their software in the next 3 weeks (Firefox 15 gets released in about a week and a half).

When I try to open Firefox 4 Beta, I get the message,"cannot open because not supported on this architecture." MAC G4 running OS X.

MAC G4 desktop.

Firefox 4 requires at least OS X 10.5 and an Intel Mac.
There is a third-party build of Firefox 4 that will run on PPC Macs using OS X 10.4, for details see http://www.floodgap.com/software/tenfourfox/

Why do I get the message "CoCreateInstance failed - Could not create 3D mouse device" with Acrobat9?

Had a crash and reinstalled everything. All is OK, except when I open Acrobat 9, I get the message "CoCreateInstance failed - Could not create 3D mouse device". Tried unchecking anything in Acrobat preferences having to do with 3D, and I don't currently have a 3D mouse device installed. Can't find any other reference in Google that includes both Acrobat and the contents of the message, part or all. Ran "repair acrobat installation" and rebooted, and that didn't help. Totally stumped!

use the cs cleaner.
first uninstall your cs5 programs (including acrobat) and uninstall adobe reader.
run the cleaner for reader: http://labs.adobe.com/downloads/acrobatcleaner.html
restart your computer.
then run the cs cleaner (http://www.adobe.com/support/contact/cscleanertool.html)
restart your computer
and finally reinstall your cs5 programs including acrobat (but not reader).

From within Photoshop Elements, when I try to open Editor, a box opens that states I must activate the software. I registered and activated the software last year. When I click to activate, I get a message that I am not connected to the internet. I am

From within Photoshop Elements, when I try to open Editor, a box opens that states I must activate the software. I registered and activated the software last year. When I click to activate, I get a message that I am not connected to the internet. I am connected. How do I get Editor to work?

You would get the redemption code, or perhaps even the serial number, from whomever you purchased the software from, apparently Amazon, so talk to them. This wouldn’t be the first time they’ve sold something that didn’t have all the numbers needed to license it.
A redemption code is something that is usually on the inner disc packaging if you purchase the media in a box, and there is a barcode on the outside of the packaging that must be scanned at the checkout register to activate the hidden inner code so you can redeem it at home on that website. This is what happens if you buy PSE from a brick-and-mortar store like Best Buy. I don’t’ know what happens if you purchase the downloaded version as I have never done that.
A redemption code is 24-digits of letters and numbers that you enter into a website to get a serial number, once and only once. The serial number of only 24-digits, no letters, is what you enter into the software during the install or when you run it and it asks if you want to register or run in a trial mode—whatever the exact phrasing is.
In any case it sounds like you don’t have either a redemption code or serial number—although perhaps something is listed on the purchase confirmation or your account online at Amazon or even in an e-mail from Amazon.

What do I do when I get the message my printer is not connected? HP Officejet Pro 8500A e-All-in-One

What do I do when I get the message my printer is not connected when I want to print wirelessly.? HP Officejet Pro 8500A e-All-in-One. I have a macintosh computer using snow leopard. I have used the printer for 6 months. Nothing has changed. I shut off the printer and turned it on. The internet is working altough I will turn it off and on. What do I do next? Thank you.

The easiest and fastest thing for you is to reset the printer to its defaults and then just install the printer again following the instructions in the manual when you received it. If you don't have these you will find this on the HP web site.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

I have iPhoto 11 with Lion and when I try to post photos into MobileMe in Share I get the message that iPhoto is not connected to internet. Can anyone tell me how to connect iPhoto to internet?

I have iPhoto 11 with Lion and when I try to post photos into MobileMe in Share I get the message that iPhoto is not connected to internet. Can anyone tell me how to connect iPhoto to internet?

My solution, which is not much, is to restart iPhoto and it then connects to the Internet. This has been an ongoing unsolved problem.

When trying to access email I get the message "Cannot get Mail - The connection to the server failed". How do I resolve this?

When trying to access email I get the message "Cannot get Mail - The connection to the server failed". How do I resolve this?

google your mail providers settings and go over them 1 by 1 to make sure it's set correctly in your ipads mail account settings

HT4628 I am able to download updates and send and receive email so I know I have connection to my wireless router. However, when I click on Safari, I get the message "Safari quit unexpectedly." What is my problem and how do I solve?

When I click on Safari, I get the message "Safari quit unexpectedly." I know I have access to my wireless net work because I just found and downloaded updates and can send and receive mail. What is my problem and hoe is it solved?

As Outlook is not an Apple product, you will find more helpers familiar with Outlook here:
Office for Mac forums

Cannot download OSX Maverick? My current system is Snow Leopard 10.6.8 and even when logged into the app store I'm getting the message that I can not download at this time. Try Later?

Cannot download OSX Maverick? My current system is Snow Leopard 10.6.8 and even when logged into the app store I'm getting the message that I can not download at this time. Try Later?

Are you connected via wifi? If so, and it is an option, try connecting using a ethernet cable. It sometimes seems to help as it can give a more reliable connection for the 5.3gb download.
If you do manage to download it you may want to make a copy of the installer file - which gets downloaded to the Applications folder - before running it as it self-deletes on successful installation. It may save you another monster download in the future.

My ipad has the message-This ipad hasn't been backed up in two weeks. Backups happen when this ipad is plugged in, locked, and connected to wi-fi. I press ok and nothing happens. I have it locked, plugged into wall, and conected to wi-fi.

My ipad has the message-This ipad hasn't been backed up in two weeks. Backups happen when this ipad is plugged in, locked, and connected to wi-fi. I press ok and nothing happens. I have it locked, plugged into wall, and conected to wi-fi. How do I get it past ok?

Go to Settings, iCloud, and then Storage and Backup. You will then see a button to backup your iPad. It may be that you have much stuff (i.e. photos, apps) for it to do a full backup but you will be able to tell what the estimated backup should be and what it will consist of so that you can choose to prune down items. If you don't want to backup and get rid of the messages you can just turn backup off from this area as well.

When connecting an HDMI adapter I get the message This device is not supported by this ipad

Similar Messages

Maybe you are looking for