When connecting my new Apple TV I get "NO PC signal" message.
When connecting my new Apple TV, I get "NO PC signal" message.
I rebooted WiFI and restarted Mac Book
What am I missing?
What model is your HDTV? Connected using HDMI? Have you ensured you are on the correct input on your TV? Tried a different cable and port?
Similar Messages
-
HT204053 when i use my apple ID i get a pop up message saying that i have not used it itunes store
help
You get an alert about resending POST data if you go back to a page or refresh a page that was previously requested from the server by submitting form data via a (hidden) POST form.
Firefox can only make sure to get the same page by resending that POST form.
Firefox doesn't know what that form data means, so Firefox asks for confirmation before resending that form data as such an action can cause you to repeat an action and buy another item or post a message another time.
A way to prevent this pop-up about resending POST data is not to use the Back button, but to open links on a page requested from a server by sending a form with POST date in a new tab (window) with a middle-click or hold down the Ctrl key and left-click the link.
Then you can close that tab or window to go back. -
Keep getting carrier update when connecting my new iPad to Itunes
keep getting carrier update when connecting my new iPad to Itunes even though I have updated it I am with o2
iTunes - Error codes and messages - http://support.apple.com/kb/TS3694.
-
when connecting to the itunes store i get a mess: (itunes has stopped working) all i can do is close the peogram. i was on the phoine with apple today over 2 hrs still cant fix it. unistalled it 3x and in the proper order. reset all internet connection to default setting, turned off virus programs ect. Even the tech at apple by remote access couldnt fix it. use microsoft fix it also no good....\
I am having the same problem now also. It happened after I updated my version. I have NEVER had this problem before as a windows user and have had iTunes for 5 years. So, I would have to say it is an Apple problem. I have not changed anything on my computer. I still have Internet Explorer and I have not even updated windows. The only thing I updated was iTunes. Now, I am not getting any response from Apple and if you call you have to pay for support. What a joke. An iPod costs $400 you would think that after paying that much you would at least get some type of help. This will now be the last time I ever by anything apple.
-
I getting error when connecting my new iPod in my car. Getting error that usb is not recognized.
I getting error when connecting my new iPod in my car. Getting error that usb is not recognized.
Not all car systems are compatible with the iPod touch. Does the documentation/website for the car system say it is compatible with an iPod with iOS 5?
-
Trying to connect my new Apple TV to the wireless network. When I try to use the remote the Apple Tv doesn't respond ( doesn't go to the next screen). Could this be caused by a weak wireless signal?
It is not properly connected to the network.
Make sure location is set correctly
DNS should be on auto (settings - general - network)
Try ethernet
Signal strength on device won't account for issues, you would need a network report from istumbler, netstumbler or similar. This will show accurate signal strength along with noise and nearby networks -
I upgraded to iOS 7 to my ipad using iTunes. When signing with the Apple ID I get an error reading "There was a problem connecting to the server" anyone who knows what to do next
Sounds more like you have a problem with your apple id. For starters go to that page click manage my apple id and singn in. If you can't sign in reset password.
https://appleid.apple.com
if you can sign in there, try to sign in to itunes on your computer. -
My new IPad Mini tells me that I need Itunes 10.7 when connected to my Apple computer. When I try to up grade, I'm told that there is no newer version than what I have. IPad mini says I have system version 6.1.3. The ITunes version on the Mini is unknown.
The problem is that your Mac software is quite old. You must have a version of OS X on your Mac earlier than 10.6.8 (current is 10.8.3), so your particular version of OS X cannot support any later version of iTunes. (The current iTunes version is 11.0.2). In particular, your iTunes on your computer cannot deal with your iPad which has software that is much more current than your OS X operating system (and Mac iTunes).
-
pioneer 8400 DVD receiver player, as iPhone ios6 update now when connecting the new iPhone with ios6 to my car DVD 8400 unit, when playing music such as on my phone or Pandora the track button does not function or work at all not even if i press skip track forward or back on the unit it doesn't function everything works except that. on listening to radio or anything else related not pairing thru Bluetooth unit works fine, seems there to be Bluetooth update that is not making iPhone and unit not compatible at all. does pioneer need fix this problem with update firmware or thru apple need help. my iPhone was working fine before with previous ios 5 before.
Dear Valued Pioneer Customer:
We would like to inform you of the availability of an optional Bluetooth® firmware update (HW05-SW01.27.20) that enables Bluetooth AVRCP control and metadata display from a compatible Pioneer CD or DVD Receiver when used with an iPhone® 5 or iOS 6 device. If you do not own an iPhone 5 or iOS 6 device, there is no need to install this update.
This firmware update may be used only with the following 2012 Pioneer products:
CD Receivers
DVD Receivers
DEH-P8400BH
DEH-P9400BH
DEH-80PRS
AVH-P2400BT
AVH-P3400BH
AVH-P4400BH
AVH-P8400BH
In order to perform this update, the following items are needed:
A Pioneer CD or DVD Receiver above with built-in Bluetooth
Laptop with built-in Bluetooth running Windows® 7
Bluetooth firmware update (HW05-SW01.27.20)
How to Obtain the Free Firmware Update
1. Download the INSTRUCTIONS for the optional Bluetooth firmware update (HW05_SW01.27.20).
2. Download the UPDATE FILE to a computer and transfer the file to a compatible 2012 Pioneer CD or DVD Receiver via a Bluetooth-enabled Windows 7 laptop.
You can also arrange for Pioneer to update your 2012 Pioneer CD or DVD Receiver by calling Pioneer Customer Service toll free at 800-421-1404 during regular business hours (M-F 10AM-7:30PM Eastern Time, except on holidays). If this firmware update is performed by Pioneer, there is a charge of $60.00 (this charge includes return shipping of the updated unit within the U.S.). Charges for removal/reinstallation of the unit and shipment to Pioneer are the customer’s responsibility.
How to Determine if the Firware Update has Already been Installed
CD Receivers:
• With the unit turned off (press and hold the source button until the CD Receiver turns off), press and hold the center of the volume knob to bring up the Settings menu → rotate the volume knob until "BT Version Info" is displayed and then press the center of the volume knob → The firmware version should show HW05-SW01.27.20.
DVD Receivers:
• With the unit turned off (press the home button and select ‘OFF’ from the source icons), press the home button → Press the “System” icon at the bottom of the screen → Select the “Bluetooth Version Info” option → The firmware version should show HW05-SW01.27.20.
If the Bluetooth firmware version shows HW05-SW01.27.20, no further action is necessary.
Questions
If you have any questions, please contact the Pioneer Customer Service Center toll free at 1-800-421-1404, Monday through Friday, 10:00 a.m. to 7:30 p.m. (Eastern Time), except on holidays.
Sincerely,
Pioneer Electronics (USA) Inc. -
I forgot iphone 4 passcode and I cant restore when connected to my computer. I get a message that says cant restore until I turn off find my iphone for the device, but I did go into icloud and erased the device. help plz!
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
7. iOS - Unable to update or restore
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software. -
when connect ipod nano 6th gen i get error message "you need to format the disk in drive G: before you can use it Do you want to format it?" Any suggestions please
Hi Michael
These are the answers
to your questions
What is the OS version, Windows Server 2008?
Microsoft Windows [Version 6.0.6001]
SP1
On which disk you choose to install it, the C: drive?
I have Raid 5
What
is the output of the Checkdsk? It find Nothing
Could
you please upload us a screen shot? I have no
Screen shot
Is
the C: drive is a external drive? NO
Besides,
have you manually assigned the drive letter?
NO
Thanks -
Trying to connect my new Apple TV to my Samsung flatscreen TV with a Belkin HDMI cable. Screen is blinking menu is there and can be accesed with the remote, but can be seen for one sec.
Changed the cable and its working.
-
I have just connected my new apple TV and in the main menu see only two icons: computers and settings. How do I access the rest of the icons (internet, movies etc...) We do not live in the US. The unit has full WiFi access with no problems, I can access ITunes on my laptop via home sharing no problem.
Glad that this solved your problem but if you searh past threads there are a LOT of people with identical problems.
Reading through the threads my take is
There seems to be something awry with wifi chipset. Typical symptoms are initially being able to connect to connect to a Wifi network then the connection is dropped. Then you see just the 'computers' and 'settings' icons on screen
Power off, reset and factory restore doesnt seem to solve it
Occasionally its nearby antenna cables etc causing interference
One report with convincing evidence it was the HDMI cable, swapping to anotehr cable fixed the problem
Plugging in ethernet works, this is purely a wifi issue
Sometimes plugging in ethernet temporararily wakes up the wifi
Many people seem to have exchanged their units only for the same thing to happen to the new unit a few weeks later. Just wondering if its a fomponent fail or heat issue. -
HT5622 i lsot all my contact when i update new version .can i get it again?
i lost all my contact when i update new version .can i get it again?
Contacts are designed to be synced to a supported application on the computer or a cloud service.
Simply sync them back. -
Apple TV (1080p) works fine if connected directly to Samsung tv, but shows no or incompatible signal when connected through Harman Kardon AVR 1565 av receiver, other signals like dish satellite decoder work fine both ways.
Does it help if you set the output to 720p.
Maybe you are looking for
-
Want to attach smartform as workitem but it doesn't work.
Dear Experts, I want attach 'SMARTFROMS' or PWB Forms as workitem attachment but i couild not able to do .My method code is as follows... function zbi_bill_revision_v1. ""Local Interface: *" IMPORTING *" REFERENCE(WID) TYPE SWW_WIID *" REFE
-
Calculating Key Figures in Copa based as sales Rev / Cusomter Price Based
Hello Gurus, I have a requirement in which i would like to calculate some key figures in COPA as sales revenue. I would like for e.g to calculate the following: Cusomter Price Based Discount but do not know what to take into consideration. Is there a
-
Sax parser returned an exception while trying to print/export in PDF
Hi all , I am getting an error as below when I am trying to export and print my report in PDF and also into POWERPOINT. Sax parser returned an exception. Message: Entity 'nbsp' was not found, Entity publicId: , Entity systemId: , Line number: 40, Col
-
Hi, I have recently got myself a second hand computer MAC OS X Version 10.4.11,Processor 800 MHz PowerPC G4. Have only used windows before. Unfortunately I managed to uninstall Adobe but now can't seem to reinstall as this an older computer and is n
-
CRS-1 8-Port 10 Gigabit Ethernet Interface Module
How much is the back plane speed for a line card on CRS-1? Does using a 8-Port 10 Gigabit Ethernet Interface Module in CRS-1 have an oversubscription of 2:1, like the WS-X6708 in 7209 chassis? Thanks