When connecting to an external projector, an old photo is displayed and does not update

When connecting to an external projector, an old image is displayed and will not update. I am working on a 2009 Mac Book Pro.

This is the Mac Pro desktop forum. I requested your post be moved to the MacBook Pro laptop forum.

Similar Messages

When I try to connect to iCloud, it says there is a server error and does not log me in. This happens every time. How can I circumvent this server error?

When I try to connect to iCloud, it says there is a server error and does not log me in. This happens every time. How can I circumvent this server error?

Try restarting your computer and your router.
If there is a specific error code, take a look at this article.
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694

My 5 yr. old turned off the volume on my ipad. when I hit the volume buttons it just says "sound effects" and does not go up or down

my 5 yr. old turned off the volume on my ipad. when I hit the volume buttons it just says "sound effects" and does not go up or down

I had the same problem- go to Utilities, General, Use Side Switch To, and change it from Mute to Lock Rotation- this solved the problem for me.
Good luck!

When I publish projects with AICC reporting enabled the SWF "breaks" and does not load.

When I publish projects with AICC reporting enabled the SWF "breaks" and does not load. If I change the publish method to SCORM the SWF works, and if I turn off reporting the SWF also works.

OK. That makes sense now. Captivate 6 changed over to Rustici's LMS drivers. Cp7 must have made even further changes that mean you must have an LMS present if you turn on reporting.
I would suggest you just turn off reporting while you are testing other aspects of the course functionality during development, and only turn on reporting when you are ready to upload to your LMS.

IWeb published old photo names... will not update

I am having a problem with the photo pages. When I first built a photo page I used images whose file names were too long. When iWeb published the files the names became corrupted and would not display.
I can't get iWeb to forget the original file names...
I have re-named, deleted, re-imported, changes the file size, and made all the changes I can think of to get the photos to be seen as new images. No luck.
Every time iWeb publishes the site it uses the "historic" names for the files.
Any ideas? I'm about to delete the entire site and start over... but I would rather not do it that way. Who knows, that might not even work!
Thanks!
PPC Powerbook 1.67 Mac OS X (10.4.5)

I've also had that problem - real headache
Here's a fix (in princple) :
Within iWeb delete the photos you don't want from the page.
Save "command-s"
Quit iWeb
Before re-opening iWeb go and check the 'Domain' 'package' - this is where iWeb stocks the ressources and assets for you as 'user' :
user/library/application support/iWeb/Domain
Click right to show hidden package contents (I use French Tiger so don't know if that's the right command name but you get what I mean).
Here you'll see all the files/images etc you have used in any of your sites/pages.
In principal when you save in iWeb the Domain gets updated and should throw out any images you deleted from your iWeb page - so those 'old' files should no longer exist.
I think what you may have been doing is deleting images from the page and NOT SAVING that change. In principal Publishing to a folder or .Mac constitues a 'save' but I'm not convinced that the two have the same effect on the Domain.
I actually binned directly from the Domain once but I've read elsewhere that tampering there might cause probs.
Hope that gives you some insight.
G5 2Ghz Mac OS X (10.4.5)

Developing site to use external javascript files for server access. my ain.js file just displays and does not execute. Why?

My ain.js file is meant to work on and access server files for tracking all visitors to the site I am developing.
One way to access it, in my plan, is to use index.htm. when I open index.htm it displays correctly and presents a link to ain.js with a query line (?a=zzzzz--e2).
The entire file is displayed; but not executed.
Short of building my own server (prior to publishing what I am developing) how do you propose I test what I have written?
As a retiree, I have limited funds (the purpose of developing a website is meant to coorect that).

This forum is for Firefox user support, very few of our contributors are developers.
Try posting at the Web Development / Standards Evangelism forum at MozillaZine. The helpers over there are more knowledgeable about web page development issues with Firefox. <br />
http://forums.mozillazine.org/viewforum.php?f=25 <br />
You'll need to register and login to be able to post in that forum.

Firefox remembers old data and does not update properly. What is the problem?

I follow my investments using the investment company's website. Today's data using Firefox does not reflect completley today's updates but retains some of yesterday's data. Why? What do I need to do?

Firefox should reload frames from the website if you reload and bypass the cache.<br />
Make sure that you do not use bookmarks that have GET data appended to the links (?xxx=xxx)
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove the Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"

My macbook pro 15inch running on maverick when i try to click on wi-fi says no hardware installed please help i need wifi and and under network staus wi-fi is fail and under network airport is not connected can anybody help the wifi icon has a x and does

my macbook pro 15inch running on maverick when i try to click on wi-fi says no hardware installed please help i need wifi and and under network staus wi-fi is fail and under network airport is not connected can anybody help the wifi icon has a x and does not even let me turn it on

Have you attempted to reset the SMC? That would be the first step. Hold the left control, option, shift key and the power button for about 5 seconds and release. Then try to reboot. Might as well reset the PRAM as well. Hold command, option, P, R on start up until the machine restarts. If that doesnt' have any affect we'll have to dig deeper into a potential hardware failure.
If this method doesn't work, check the webcam that will tell the problem is on the iSight & WiFi cable. If your webcam is ok, then it'll be the WiFi card problem. Hope it can help ;-)
- xia_us9

HT201263 the "connect to itunes" screen is displayed and will not change

The "connect to itunes" screen is displayed and does not change after an update.

Maybe:
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
Next try placing in DFU mode and then restoring.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Then try restoring on another computer.
Last, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

When Firefox opens my MSN homepage is out of date and will not update

When Firefox (v 4) opens my homepage is out of date and will not update to the current date even when reloaded

I'd recommend you delete the URL to your homepage which is causing the problem via Tools | Options | General and then go to the MSN homepage again and click the button "Use Current Page".
MSN may have changed the coding in the URL which is causing Firefox to load an outdated page with your current settings.

My Macbook Pro 15-inch with retina display crashes sometimes when connected to an external monitor

My almost-new Macbook Pro 15-inch with retina display goes black and shuts down sometimes when connected to my external monitor. (The first time it did this was when connected to a projector.) They have replaced the motherboard but it still happens sometimes. The computer and monitor both come back on after a few seconds.

Welcome to Apple Support Communities
To mirror your Mac's display onto your TV, press Command and F1 keys. Read > http://support.apple.com/kb/HT5019

I am trying to connect to an external projector

I have a 15" Macbook pro running Windows XP Pro bootcamp, I am trying to connect to an external projector using the Mac mini dvi to vga adaptor, I have now tried two different adaptors but still I cannot get the display to work.
Does anyone know if there is an update that needs to be installed or additional drivers that may need to be installed for this to work?
Anyone out there have any ideas?
Thanks
Simon

Thanks to the suggestion of downloading XP Service Pack 3, the problem seems to be resolved!
Jen

HT1923 Before I un-install itunes has anyone had a problem getting an ipad mini to show up in itunes as a device when connected to the computer? My old ipad shows up but not the new mini.

Before I un-install itunes has anyone had a problem getting an ipad mini to show up in itunes as a device when connected to the computer? My old ipad shows up but not the new mini.

Just wondered if anyone had any other suggestions.

My Macbook (2009 White) Has had water spilled onto it, it all works apart from the screen. When connected to an external display it works fine, just not on the Macbook itself. Does anyone know how to fix this?

My Macbook (2009 White) Has had water spilled onto it, it all works apart from the screen. When connected to an external display it works fine, just not on the Macbook itself. Does anyone know how to fix this?

Take it to Apple and ask them to fix the physical damage the water caused.
Allan

I have a new time capsule (replace my old time capsule). I want to erase my old one. My computer does not see the old one anymore, how do I connect it (the old TC is not connected to modem)

I have a new time capsule (replace my old time capsule). I want to erase my old one. My computer does not see the old one anymore, how do I connect it (the old TC is not connected to modem). I want to erase it and then use it as either a second hard drive (sired/sirelesly?) or as a hard drive/bridge. So,
1. why doesn't my cmputer see the old TC
2 once i have solved that, how do I erase the old one
3. Can I use the old one as a supplemental hard drive
     a. wired?
     b. wirelessly?
4. Can I use the old one as a range extender?
I know .. a lot of questions but I would appreciate any help.
Thanks

sgetraer wrote:
I have a new time capsule (replace my old time capsule). I want to erase my old one. My computer does not see the old one anymore, how do I connect it (the old TC is not connected to modem). I want to erase it and then use it as either a second hard drive (sired/sirelesly?) or as a hard drive/bridge. So,
1. why doesn't my cmputer see the old TC
2 once i have solved that, how do I erase the old one
3. Can I use the old one as a supplemental hard drive
     a. wired?
     b. wirelessly?
4. Can I use the old one as a range extender?
I know .. a lot of questions but I would appreciate any help.
Thanks
1. Because it is either the same IP as the new one or hidden by being plugged in as a second router.
To access it, isolate one computer from the existing network and plug it directly by ethernet to a lan port of the TC. Use the erase function in the TC to remove all the content of the hard disk.
Then go to the internet tab, connection sharing and select off bridged. You can then reconnect the TC to the network.. and the computer as well. The TC will act as bridged device.. getting IP from the main router and should then appear correctly in Airport utility.
2. I covered in 1. But you just go in airport utility manual setup. disk, and you will see the erase function. You can also set it to bridge and leave the erase until you put it back in the network.. but be careful you erase the right one.
3. You can use the old TC via wired or wireless.. although I would always stick to wired connection if possible. Speed on wireless is 10x worse than wired.
Also note the reliability goes down dramatically after 2 years.. a series 1 3 years old or more is ebay fodder unless you want to repair it. Do not trust vital data to it.. when it dies you will have issues recovering it.
4. Yes, all apple routers will function as wireless extenders. when you do that the ethernet ports turn off so it becomes a purely wireless device.. strange apple decision on what you want to use your TC for.

When connecting to an external projector, an old photo is displayed and does not update

Similar Messages

Maybe you are looking for