When connecting wired my router straight from my internet provider I get speeds in the 90mps range.  Now when connecting wired through my airport extreme I get speeds near 10mps. Also when using wireless for my ipad3 I recieve download speeds of .63mps.

When connecting, wired, to my router from my ISP I get speeds in the 90mbps range.  Then when connecting, wired, to my Airport Extreme I get speeds of 10mbps.  Wirelessly I get download speeds of 6mbps on my laptops and only 1mbs with my Ipad3.  I am making sure only one device is sharing the network to make sure to get accurate results.  Why are things so slow?

Hi Ty,
First, check with you ISP to see what speed they've promised.  In my case, they indicated that the speed should be greater than 50 Mbps.  If they say that it should be significantly higher than what your getting, then try the following if you're using Airport Utility v.6.:
1. Open the Airport Utility (Desktop: Command+Shift+U to open Utility Folder, select Airport Utility)
2. Click on the visual representation of the Airport Extreme and then select "Edit" (bottom right corner)
3. When the window opens (to a tab "Base Station"), click on the "Wireless" tab,
-it should have the following options: Network Mode, Wireless Network Name, Wireless Security, Wireless Password, Verify Password, a checkbox with "Enable Guest Network", and a button "Wireless Options..."]
4. Select "Wireless Options", which should open another window with the following options:
5Ghz network name, Country, a checkbox with "Create hidden Network", Radio Mode, 2.4 GHz Channel, and 5 GHz Channel [both of which can stay on "Automatic"]
5. Clicking on  "Radio Mode" will bring up a list in which the las option should read:
802.11n only (5Ghz) - 802.11n only (2.4 GHz)
Once you click "Save", your router will blink amber for a little while and then it should work.
Hope this helps.  Let me know if it does/doesn't.
DFLovesBikes
p.s. I apologize if the directions were excessively explicit, but I was thinking about my 73 year-old mother trying to follow them, so I erred on the side of making them more understandable.  Good luck.

Similar Messages

  • I have ATT internet service at home and a 2Wire device.  I want to switch to an airport extreme 5th generation and I am having difficulty.  Looking for help.

    I have ATT internet sevice at home and a 2Wire device.  I want to switch to an 5th generation Airport Extreme and I am having difficulty.  Any suggestions?

    Yes, Bridge Mode is the correct setting for the AirPort Extreme when it is connected to another gateway, or modem/router.
    Connect an Ethernet cable from one of the LAN <-> ports on the 2Wire to the WAN port (circle of dots icon) on the AirPort Extreme.
    Open AirPort Utility and click Continue to follow the guided setup to "create a wireless network" on the AirPort Extreme. The application should suggest Bridge Mode as the connection option during the setup.
    Once you have the AirPort Extreme setup and providing a wireless network, if you don't really need the wireless network that the 2Wire is providing, it would be good idea to turn it off....since having two wireless networks in close proximity can introduce some interference issues.

  • My DVD player ejects disks automatically when i insert a disk.  PRAM REST and ran Disk Utility. Still the same.  Now I got a DVD Cleansing Disk and still gets ejected automatically without a spin. Does anyone know what the problem is?

    HL-DT-ST DVDRW  GS22N:
      Firmware Revision: CP08
      Interconnect: ATAPI
      Burn Support: Yes (Apple Shipping Drive)
      Cache: 2048 KB
      Reads DVD: Yes
      CD-Write: -R, -RW
      DVD-Write: -R, -R DL, -RW, +R, +R DL, +RW
      Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
      Media: Insert media and refresh to show available burn speeds

    Chances are good that your internal optical drive has failed.
    The slot loading optical drives that Apple uses in their computers is not of high quality and their reliability varies throughout different Mac computer models.
    Not all optical drives are Mac compatible.
    Most Mac compatible drives you will only find to be purchased online.
    Here are two on Amazon.com that are cheap and Mac compatible
    http://www.amazon.com/LG-GP10NB20-Portable-External-Drive/dp/B004K2Z4MS/ref=sr_1 _3?ie=UTF8&qid=1398883289&sr=8-3&keywords=Mac+compatible+external+LG+optical+dr i ve
    http://www.amazon.com/LG-Electronics-Portable-External-GP40NB40/dp/B009DS6OFU/re f=sr_1_7?ie=UTF8&qid=1398883289&sr=8-7&keywords=Mac+compatible+external+LG+opti c al+drive
    Here's another source for Mac compatible optical drives. These are better quality optical drives.
    These are also tray loading drives.
    http://eshop.macsales.com/item/OWC/VLU2SD24XS/
    http://eshop.macsales.com/item/OWC/MR3F82SD24S/
    Good Luck!

  • WIFI stopped working after I woke the computer up, now says connected to the network but not the internet, all other coputers and devices connected still with no problems, have pinged IP address from router and got the message "4 packets sent none receive

    Hi,
    WIFI stopped working after I woke the computer up, now says connected to the network but not the internet, all other coputers and devices connected still with no problems, have pinged IP address from router and got the message "4 packets sent none received"... Help
    I have tried network diagnostics which doesnt help... The only other ting is, when I woke the computer up it said tat another device was using my IP... My wife had plugged her phone into the computer to charge etc but even when i turn wifi off on the phone there is no change... also in settings on the phone the IP address is different...

    The answer to your question is - neither!
    Your PC should to configured to obtain an IP address automatically, and to obtain DNS server IP addresses automatically, from the Airport Express. This is the way Windows (and Macs for that matter) are configued by default, and that is the way most people have their computers set up. If you manually configured your PC's IP address to be the same as your wife's Mac, it certainly explains why your PC is not able to access the internet.

  • HT1296 I downloaded an album from i Tunes to my i Phone 4 but somehow all but two of the tracks have deleted themselves from there. When I try to synch again (from a Windows pc) I can't upload the missing tracks again. they are playable from the PC but no

    I downloaded an album from i Tunes to my i Phone 4 but somehow all but two of the tracks have deleted themselves from there. When I try to synch again (from a Windows PC) I can't upload the missing tracks again. They are playable from the PC but not the i Phone. Any ideas?

    You may have to sync all your music off your phone (by unchecking Sync Music on the Music tab of your iTunes sync settings and syncing), then sync it back on to fix this.

  • Trying to connect a NetGear Wifi Range Extender to my existing Wifi. I have an Airport Extreme Base Station and I am also connected to a Vonage Phone Router. Any help would be appreciated?

    I am trying to connect a NetGear Wifi Range Extender to my existing Wifi. I have an Airport Extreme Base Station and I am also connected to a Vonage Phone Router. Any help would be appreciated?
    The Apple update Firmware for my Airport Extreme Base Station does not update for some reason? Help?
    Additionally, I have an older version Airport Express that does not update with the newer Airport Utility Version 6.3 and asks me to download 5.6 to update? Is this worth it?
    Thanks

    The netgear is not going to work very well.. and not at all unless it is universal wireless extender.. you cannot use WDS method.
    If it does support universal wireless then make sure the airport uses a rational SMB compatible wireless name.. not an apple name which is 35 characters long with spaces and illegal characters like apostrophe.
    So nice AE name.. AEwifi and actually while you are trying.. fruitlessly to do this.. use AE24ghz and AE5ghz (so different names on the different bands)
    Assuming your AE is gen3 or greater.
    You should also fix the wireless channel at least for 2.4ghz since the netgear is probably only going to repeat 2.4ghz so use channel 11, as a trial.
    And use no wireless security as a test.. if that works.. then use WPA1 & 2.. as often old equipment using WPA2 is not compatible.
    If it fails with simple name.. fixed channel and no security. Sorry it is not compatible at all.. it happens.
    If your AE is G wireless or earlier model.. really the time has come for replacement.
    If your Express is G wireless model it is not supported.. and is too old to bother with expect I guess if you want to run audio to a speaker.
    You must use older 5.6 utility to do this.. so do you have a computer running older OS.. up to Mountain Lion it is easy to install with a bit of manipulation.. later is much harder .. or windows computer anywhere or available to you.

  • TS2565 when updated to 9.1.7 from 9. I need new serial and the old serial number doesn't work. How can i solve this?

    when updated to 9.1.7 from 9. I need new serial and the old serial number doesn't work. How can i solve this?

    There was no new serial needed to update from Logic 9 to 9.1.7
    If your Logic 9 was an upgrade from Logic 8 it may be asking you for your original Logic 8 Full serial first and then your Logic 9 Upgrade serial...
    Otherwise, it's best to call Apple directly and get them to help you...

  • HT4623 I screwed up.  I was trying to SYNC and something (error msg) happened.  I tried to continue the SYNC and now my IPhone is dead.  All I can get when I turn it on is a picture, from bottom  to top, I have an WSB connector, an up arrow, and an iTunes

    I screwed up.  I was trying to SYNC and something (error msg) happened.  I tried to continue the SYNC and now my IPhone is dead.  All I can get when I turn it on is a picture, from bottom  to top, I have an WSB connector, an up arrow, and an iTunes icon.  I can't use the phone.  And it's my only phone.  What can I do to rectify this situation.

    It's telling you to connect to ITunes and restore your phone. This will have to be done with a USB cable and iphone connector that came with your charger.

  • I bought a Iphone 4S in Colombia two months ago, It never work properly, I cant put turn it on.  When I went to Movistar they told me that it was a problem with the software.  Now, they have the Iphone for repair.

    I bought a Iphone 4S in Colombia two months ago, It never worked properly, I cant put turn it on.  When I went to Movistar they told me that it was a problem with the software.  Now, they have the Iphone for repair at Movistar.  The questios is, If I bought a NEW Iphone why they gave me a Iphone with this problem.  I asked about the warranty but they told me that Apple doesn't respond.  Please tell me something.  The IMEI is: 013071008363505 is a Iphone 4S  16GB.  Black.

    I would guess the fan is the cause of the noise. Suggest you take a look at it.
    This site has a wealth of information about getting inside a Macbook or Macbook Pro.
    http://www.powerbookmedic.com/mac-repair.php

  • When i try to add music from itunes to my ipod itune tells me the music on my ipod came from a differnt libray and  wants to erase my whole ipod. i just loaded my ipod two days ago. i don't want to replace everything every time i want to add to songs

    When i try to add music from itunes to my ipod, Itune tells me the music on my ipod came from a differnt libray and  wants to erase my whole ipod. i just loaded my ipod two days ago. i don't want to replace everything every time i want to add two to songs. My MacBook Pro is the only autherized computer.

    To prevent a sync when plugging in the iPod/iPhone - hold down the 'option' and the 'command' keys when plugging in the iPod/iPhone - key the keys down until the iPod/iPhone is listed under the Devices list in iTunes - this will prevent a sync from taking place and you will be able to change your settings.
    MJ

  • When I capture a still frame froma video in Llightroom 4.3, where does the captured frame end up?

    When I capture a still frame froma video in Llightroom 4.3, where does the captured frame end up? I cannot find it. Stan

    It will be right next to the movie in your library and the jpg file will end up on your hard disk right next to the movie file. You can see the actual file by right (or control) clicking on the image in the library view and selecting "show in Finder/Explorer"

  • When Uploading a video, I am given a "Online services encountered an error. The Service will now be terminated or paused if possible." How do I fix this? Where did it come from?

    When Uploading a video, I am given a "Online services encountered an error. The Service will now be terminated or paused if possible." How do I fix this? Where did it come from?

    Provide the name of the program you are using so a Moderator may move this message to the correct program forum
    This Cloud forum is not about help with program problems... a program would be Photoshop or Lighroom or Muse or ???

  • I have a Airport network at home with a Time capsule connected via ethernet cable to modem. Also the network is extended wirelessley with an Airport Extreme. My question is I now wish to add a second Airport extreme but am considering a hard wire connecti

    I have a Airport network at home with a Time capsule connected via ethernet cable to modem. Also the network is extended wirelessley with an Airport Extreme. I now wish to add a second Airport extreme but am considering a hard wire connection with 100 ft of cat 6 cable from the Time capsule to the second Airport extreme.  Can my network operate properly to extend the network with both a wireless and wired extend functionallity?

    I now wish to add a second Airport extreme but am considering a hard wire connection with 100 ft of cat 6 cable from the Time capsule to the second Airport extreme.
    Excellent plan.
    Can my network operate properly to extend the network with both a wireless and wired extend functionallity?
    Yes, but don't get confused about the second AirPort Extreme, as it would not be configured to "extend" a wireless network.....it would be configured to "create a wireless network" using the same wireless network name, security settings and password as the Time Capsule network. Configure the second Extreme in Bridge Mode.
    This Apple support document will show you how to hookup and configure the second AirPort Extreme:
    http://support.apple.com/kb/HT4260

  • Remote Desktop Connection won't connect to ip address through my airport extreme?

    I can't seem to get my RDC to connect through my airport extreme. I know it must be a setting on my airport extreme, but can't figure it out.
    When I hardwire the ethernet cable from the modem to the computer it connects fine, and when I set up a hot spot through my iphone, it also works fine every time as well.
    I've made sure to add "Windows Remote Desktop" through the port setting in Network settings on the Airport. Can someone please help me??
    Many thanks in advance...

    Hello Jedid4n. Welcome to the Apple Discussions!
    Do you have the AirPort Express Base Station (AX) configured as the remote base station in a WDS with the AirPort Extreme Base Station (AEBS) configured as the main base station? In order for the AX's Ethernet port to be enabled, the AX would have to be set up as either a remote or relay in a WDS.

  • HT3546 I have been unsuccessfully trying to extend the wifi of my Time 2T Capsule with an Airport Extreme 2nd Gen. It works for a while and then loses configuration. I have done everything possible, disconnected it, reset it but it keeps failing, what to

    I have been unsuccessfully trying to extend the wifi of my Time 2T Capsule with an Airport Extreme 2nd Gen. It works for a while and then loses configuration. I have done everything possible, disconnected it, reset it but it keeps failing, what to do?

    What model and firmware is the 2TB TC?
    What firmware is the AE?
    Does the AE get good signal from the TC in its current location?
    Signal can only be extended that is received intact.
    Is it extending on 5ghz? As I remember it a Gen2 AE is only single band, although you can choose either 2.4ghz or 5ghz.
    I am fairly sure you are going to tell me your TC is AC model..
    I would do a couple of things..
    1. Fix the wireless name, make it short, no spaces and pure alphanumeric.
    2. Fix the wireless channel for 2.4ghz so it is not going to jump around.
    3. Get real results from the AE in its current location for signal strength.. this is really only possible on v5 utility. And that is a double pain with Mavericks because you cannot use it.
    Apple have removed all the useful diagnostics from the airport utility. There is next to nothing left. So you need to use the computer and its diagnostics to find signal levels in the location.
    http://support.apple.com/kb/HT5606

Maybe you are looking for