When connecting with FaceTime, I see other people then they hang up.

When connecting with FaceTime, I see other people then they hang up. Has anyone one else encountered this?
Usually, my wife contacts me with facetime, I try to accept connection and she sees other people form another country that quickly hang up.
This happens often.
Thanks

This seems to happen with the Iphone 5s if I am not mistaken
Thnaks

Similar Messages

Using iMessage on iOS 8 with family sharing can other people linked to the account see my iMessages? We each have our own apple IDs.

Using iMessage on iOS 8 with family sharing can other people linked to the account see my iMessages? We each have our own apple IDs.

no… the way to confirm is make sure in settings>messages>send and receive that all the apple ids are different in there.

The clock on my ipad seems to be stuck? Could this have anything to do with my not being able to connect with FaceTime ?

The clock on my iPad seems to be stuck ? Could this have anything to do with me not being able to connect with FaceTime ?

In order to backup to iCloud the iPad must be plugged into a power source, connected to WiFi and locked - meaning that it must be asleep - or with the lock screen only visible. This is for automatic backups.
If the iPad is not responding at all to any user input, try restarting it or resetting it and see if you can take the steps necessary to back up. You can initiate the backup manually as well.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

When I use FaceTime on iPhone 5 people I call can not hear me.

When I use FaceTime on iPhone 5 people I call can not hear me. Anyone can help me?

The lower mic is faulty, either due to logic board fault or lower mic itself fault. If lower mic itself, the replacement part is iPhone charging port assembly with flex cable, lower mic, and home button flex connector all a less than $10 single part. Apple handles this problem with replacement iPhone 4S for $199, make Genius reservation to avoid long wait time. The reason the speakphone still works is because it uses the upper mic, which is at the small pin hole at top of iPhone next to headphone jack port.

TS3694 Downloaded latest IOS 7.0.2 and it crashed my iphone 4. Now Ive got nothing and it wont restore when connected with Itunes cos Error Message 4005 comes up. Cant find it listed anywhere. Help

Downloaded latest IOS 7.0.2 and it crashed my iphone 4. Now Ive got nothing and it wont restore when connected with Itunes cos Error Message 4005 comes up. Cant find it listed anywhere. Help

Hi!
It looks like there might be some security settings or software on your laptop that's preventing the restore process from working.
Check out this article in Apple's support. It shows you the steps you can take to try to get around error 1611.
Like diesel vdub said, a DFU-mode restore might give you success where a regular restore might not, so maybe you can try that.
What you need to do is put your phone into DFU mode, which is a low-level mode that helps the restore process get a little more done, or it can help iTunes get around certain roadblocks (hopefully like the one you're experiencing!). Your computer will install special DFU-iPhone drivers for it, and then iTunes will see it as a phone that needs restoring.
To get your phone into DFU mode:
Plug your phone into your laptop.
Turn the phone off.
Press and hold the power/lock button. Keep it held in, even after the display turns on and you see something on the screen. As soon as you see something on the screen, start holding the home button as well as the power button, so that they're being pressed together.
Keep both buttons pressed down for 10 seconds.
After 10 seconds, release the power button, but keep holding home until the laptop sees a new USB device. Once you see that, you're in DFU mode, and you can let go of buttons. Your iPhone screen will be blank during it all, even though it's actually on, in DFU mode.
Now your restore should work!
If your phone shows the Apple logo or anything else while you're trying to get it into DFU mode, then something went wrong. Try the steps again. If it suddenly starts up normally again, try reducing the time to a bit less than 10 seconds--try reducing it by about a second at a time. It should work!

Since upgrading the IOS 8 on my IPad 2 I can longer get a full screen on my TV when connected with an HDMI cable. anything I should change in my settings? Right now my iPad is mirrored on the TV with a black box all around the edge

Since upgrading the IOS 8 on my IPad 2 I can longer get a full screen on my TV when connected with an HDMI cable. anything I should change in my settings? Right now my iPad is mirrored on the TV with a black box all around the edge

I have reached the same conclusion in the mean time. I have done a bit of investgation in to other grahics cards and am seeing some that show SPDIF connections from the card to the mother board. I was not familar with SPDIF but it did a little bit of sluething. It is of course a digitally enconded voice. I am guessing that in that case the mother board ( assuming it supports this hardware option) would use this output and be able to translate that digital audio to its other audio outputs. That is a lot of guessing of course. I think my "solution" might be a whole new desktop - a rather drastic course of action! I was in the proceess of getting ready to upgrade this machine anyway with a new graphics card (which I will now return), go to Win 7, and maybe even a new digital TV reciever, and I don't want to throw good money after bad anyway.
Thanks for your comments

Will not recognize the Lucid LG when connected with USB

My Dell will not recognize the Lucid LG when connected with USB. Both the computer and phone gives a split second prompt that they are connected but then goes away immediately. After reconnecting it several times however it will finally recognize the mass storage. How can I get away from the hassle of multiple re-connections before it finally recognizes that connection?

That's some helpful information about your issue samrmusso! Some recommendations that I have for you is to try a different USB port on the computer to see if it isn't an issue with that specific USB port. Are you using the cable that came with the device (recommended) or a 3rd party cable (may not support data transfering properly)? You can also try restarting both the device and computer and retest. It's possible that there's a driver conflict on your Dell. Here's how to check for these types of conflicts: http://goo.gl/qH4m5
Keep us posted on any additional information/details about your issue.
Thanks,
MikeS_VZW
Follow us on Twitter @VZWSupport

Connecting with FaceTime in Moscow

I bought an iPad2 for my granddaughter to use in Moscow. She had wifi in her flat and uses the iPad2 there to send me emails OK. However, when I try to connect with FaceTime my iPad2 rings out but she doesn't get the call. We used FaceTime to communicate in the UK without any trouble using the same kit and settings. Does anyone have any ideas as to what might be causing the problem?

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
 Cheers, Tom

My iTunes 10.4 will not open when connected with my iPod Touch (v.4.3.5), however, it used to in the past- can anyone help me? Thanks.

I am curious as to why my iTunes 10.4 won't open when connected with my Touch (v.4.3.5). iTunes used to open when connected with my Touch. Can anyone help me? Thankyou.

I have got a solution, it was shared on another 'apple support coummunity' board:
https://discussions.apple.com/message/15830348#15830348
It worked for me

My iPhone 5 got problem when connect with lighting cable, this will keep pop up message "this accessory may not be supported"

My iPhone 5 got problem when connect with lighting cable, this will keep pop up message "this accessory may not be supported", I can't charge or sync at all. I tried plug and unplug many time, still can't detect/charge my iPhone5, but sometime will 'lucky' that can connect to my iTunes and charge battery…
This message will auto pop up also when I don't have plug anything in my iPhone 5, It is very annoying…
The lighting cable is original and now i'm using OS 7.0.4 / iTunes is 11.1.3
What I can do to fix this problem? Thank you.

I would try using another cable you can likely borrow one to test from somebody
if it's the same then likely the connector in your iphone have been damaged

I have a problem to connect with FaceTime. I am using OS X 10.9.1 on a Mac PowerBook which is 4 weeks old. I can connect on iPhone but not from my computer.

I have a problem to connect with FaceTime. I am using OS X 10.9.1 on a Mac PowerBook which is 4 weeks old. I can connect on iPhone but not from my computer. Does anyone have a similar problem???

The warranty entitles you to complimentary phone support for the first 90 days of ownership.

I need to scan wirelessly from a MAC (OS 1.7 or higher) through Adobe Acrobat Pro X (or higher). Have discovered that all in one printers say they are MAC compatible but will only scan when connected with a USB cable. Would prefer a laser, color, all in

I need to scan wirelessly from a MAC (OS 1.7 or higher) through Adobe Acrobat Pro X (or higher). Have discovered that all in one printers say they are MAC compatible but will only scan when connected with a USB cable. Would prefer a laser, color, all in one. Does anyone have printer suggestions that you know will scan wirelessly?

Great information.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Can't open app store in itunes when connected with ipad

Hi. Could anybody tell me how I can use app store in itunes when connected with ipad 2? When I click app store, it just gives no response at all. Thanks a lot!

Welcome to the Apple Community.
Do you have the power cable in, it won't show up with the power cable in.
Additionally, there have been some issues with the update servers, it's possible you won't be able to complete the update procedure anyway.

Why isn't my iPad2 charging its battery when connected with my iMac?

Why isn't my iPad2 charging its battery when connected with my iMac?

A lot of computers, especially older ones (I don't know how old yours is), don't provide enough power through their USB ports in order to charge the iPad - it may still be charging, but at a low rate (it may charge quicker if the iPad's screen is off). If you want to charge it at a reasonable rate then the wall charger is better.

I cannot connect with facetime in my imac. Why?

I cannot connect with facetime in my Imac. Why? I have an apple id and password which i use for my ipad and iphone. Why does it not work for the imac?

i had the same problem but i just kept quitting and opening the app and putting in my information a whole bunch of times and eventually it worked

When connecting with FaceTime, I see other people then they hang up.

Similar Messages

Maybe you are looking for