When Contract is expired and automatically goes to prepaid

My Verizon contract will expire on April 4, 2014. However, I am not signing a new contract. Right now I have 4 GB between 3 phones. The contract on 2 of my lines expire in April, but the 3rd one will remain on contract for another year. How many GB or MB will my two phones have that will go to a monthly prepaid plan. Will it be divided up? Thanks.

coolmamaw06,
I'm glad you asked! I understand you may not want to sign a new contract; however, you have been pointed in the right direction. Though the contracts will be over then for 2 lines, they are not swtiched to a prepaid service. They remain on the same plan until we're advised otherwise. Are you looking for a different plan?
AdaS_VZW
Follow us on Twitter at @VZWSupport

Similar Messages

What does it mean when you call someone and it goes straight to the 3 beeps to mean cancelled

hi
what does it mean when you call someone and it goes straight to the 3 beeps to mean cancelled? this phone doesnt even ring, it just goes straight to the BEEP-BEEP-BEEP, its an iphone 4 and on IOS7 and it was ringing eailier on in the day when i spoke to this person. it wouldn't mean i have been blocked would it?
what does all this mean?
thanks
mrredrunner100

i got my friend to message this person to see if they had the same problem, and the message went through and i think he got a reply, and all of a sudden this has started to work again (calls only) but apparently none of my messages went through that i have sent since the block activated. and they still havent even though there working again, and "apparently" a message was sent to me at 9pm today and it has never arrived. so imessage and text still isnt working, before i go asking this person about this, is this a genuine block or is there a phone problem?

HT201263 I tried to reset my iPhone (3gs) with deleting all data. When it power off and automatically again on then it is showing Apple logo only. Not restore and startup my phone. I tried to charge and not charging. What I should do now?

I tried to reset my iPhone (3gs) with deleting all data. When it power off and automatically again on then it is showing Apple logo only. Not restore and startup my phone. iPhone alerming low charge and I tried to charge and not charging.
What I should do now?

Something has gone wrong. Turn your phone off, then force it into recovery mode:
Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new. In your case, select "new".

My G3 has 10.1 but when I sign in it automatically goes to 9.2 please help

My G3 always ran 9.2, recently I had the apple store install 10.1, which was working fine. then my wife put a my son's computer disc game in and for some reason everytime I sign in it automatically goes to 9.2 and I can't figure out how to put back 10.1. thanks for help

Hi jaja, and welcome to the discussions.
Have you tried changing the startup disk?
Under the Apple menu, go to Control Panels, then select Startup Disk. The OS will take 30 seconds to a minute to find all the available startup disks, so be patient. Does it list OS X 10.1 as an option? If so, make sure it's selected, then hit the restart button.
Let me know how this goes.
Andrew

I hit some button that i don't know, and now when i open firefox, it automatically goes to minimized. How do i get it back?

Ok, i'm a boob, i was using firefox, hit some button inadvertantly and now when i double click to open it, it goes straight to minimized. Using 33.1.1 with windows xp.

Thank you for your advise. While your remedy does work to that end, i usually have my browser set to partial window rather than full screen, so I'd have to make an adjustment that way too. It used to come up into the partial screen, but now drops to the task bar upon opening. Or it opens full screen, if i set it to full screen before closing out my browser. I'm looking to have it open to partial screen like it used to. Any ideas?
Thank you for your time, i appreciate it.

Alert/Email notification for contract getting expired and threshold limit

Hello All,
For Central Contract management SRM 7.0 we have a requirement where an alert or e-mail notification is to be sent to a group of purchaser if following occurs.
u2022     The validity period of a contract is about to expire
u2022     The greatest possible release quantity will soon be reached
u2022     A new contract has been released
u2022     A purchaser has moved within the organization
u2022     The processing time for a contract has been exceeded
Currently one purchaser is responsible for more than one purchasing group hence whenever a contract reaches it threshold limit a notification mail should be send to a group of Purcahser.
If any one has any one taken care of this type of requirement then please let me know the configuration of how this can be achieved.
Thanks,
Yatin

Hello Massa,
Thanks for the input.
We checked with BBP_ALERTING badi and although the communication type could be changed in debugging mode still the final output is that the system checks for the RML set up in SU01 user profile of the recepient.
For this we took 2 users one with INT setting and other with RML setting.
Contract created with these two user and the expiry date is less than the threshold limit as a result alert got triggered.
In Debugging mode, event ( BBP_EVENTS_DET_RECIPIENTS) for both the user the communicaiton type was coming as blank, we forcefully changed the setting to INT.
But the final result is that the program is checking the SU01 default setting while sending mail, and it send to one user via INT and for other via RML method which should not be the case.
Can you please let me know exactly where I can do the changes, this is really critical for the project as commnunication type change involves a Global change which business people are relecutant to do so.
Thanks,
Yatin
Edited by: yatendra rawat on Oct 1, 2010 11:48 AM

My new tab pin page is gone and automatically goes to google; how do I get my pin page back?

Usually when I open a new tab in Firefox, I have a page of pinned sites. I must have downloaded something and accidentally disabled it and now I get Google every time I open a new tab, rather than the page with pins. Is there any way to re-download the pin page, or is there somewhere I can go to reactivate it or make sure it's activated? I don't have any Firefox updates.

You can check the browser.newtab.url pref on the <b>about:config</b> page.
*http://kb.mozillazine.org/about:config
See this article about the New Tab page (about:newtab):
*https://support.mozilla.org/kb/new-tab-page-show-hide-and-customize-top-sites
Try to reset some preferences to the default with the SearchReset extension:
*https://addons.mozilla.org/firefox/addon/searchreset/
Note that the SearchReset extension only runs once and then uninstalls automatically, so it won't show on the "Firefox > Add-ons" page (about:addons).

Verizon won't honor my contract...I'm going to the local news and the FCC

On Friday I called Verizon because our 2 yr contract was expiring and, frankly, I didn't want to renew. I just wanted to know what my options were as far as disconnecting our FIOS services. I have had two years of nothing but troubles with Verizon and wanted to be rid of them. However, I ended up speaking of {edited for privacy} from the Rentention Department, who offered me a very good deal to stay. And, I have a confirmation number for that contract. Within two hours after I got off the phone with her, we lost our phone service as, even though she verified with me that we were keeping our copper phone, the system switched us to a FIOS phone. This is Tuesday night. I can make phone calls out, but incoming callers are now told our phone service has been disconnected. I called tonight and spoke with "Mike" who told me that Verizon would not honor the contract that Maureen gave me. To say the least, I am infuriated. I have already contacted a friend of mine who is a reporter for our local news channel, and will be contacting the FCC tomorrow regarding possible legal implications.

BethH,
We are glad that you now have your services back. We value you as a customer and will work to get the contract that you were promised or a comparible contract. Please feel free to contact us if you need any further assistance.
Thanks,
Tonya D.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

Redirect to main jsp when the session expires

Hi,
I have a jsp say mainframe.jsp in which I have two frames each having a jsp page say child1.jsp and child2.jsp.
When the session expires and I when i try do any changes in child2.jsp or child1.jsp, the page redirects to login page and when I login successfully, I am getting redirected to child2.jsp or child1.jsp respectively. But I want it to be redirected to mainframe.jsp.
Any help is greatly appriciated.
Thanks in advance.
Vinod

I think I am not clear.
When I try to login after session expiry, I am redirected to child jsp.
But what I want is that I should be redirected to mainfram.jsp page.
url in the address shows : ../mainframe.jsp?ID=******
When my seesion is expired and I try do some manipulation in child1.jsp (which is inside a frame of my mainframe.jsp). it is redirected to login page and from there to child1.jsp instead of mainframe.jsp
Now the address url shows : ../child1.jsp?ID=********* because of which I am not able to see child2.jsp along with child1.jsp
What I want : ../mainframe.jsp?ID=********
this is the code I am using !!
String destPage = request.getRequestURI();
response.sendRedirect("../redirect.jsp?dest=" + URLEncoder.encode(destPage));

Having trouble getting "Set action to take when logon hours expire" to work - Windows Server 2012

I have a Windows Server 2012 server that allows remote desktop users (sessions are hosted on the server itself). I'm trying to enforce logon hours for these remote desktop users.
I have specified logon hours for a user and confirmed that they work--they aren't allowed to logon when logon hours are disabled. However, they are allowed to continue a session past their logon hours limit if they are already signed in (which is fine, this
is the default behavior).
However, when I try to use the `Set action to take when logon hours expire` option (`User Configuration/Administrative Templates/Windows Components/Windows Logon Options/Set action to take when logon hours expire`), and set the behavior to "Logoff",
nothing happens--the user can continue their session happily. I've tried applying this policy both for the user's group and for the local computer. I've run `gpresult` for the user and confirmed that the policy is apparently in place.
I also naively tried the "Force logoff when logon hours expire" option, but that apparently doesn't apply to interactive logins (confusing!).
Am I misapplying this setting, or do I need to take some other steps to get it to work? I'd be grateful for any input. Thanks!

Hi,
Sorry for the late response.
We can log off and log on again to see whether the setting gets applied.
According to
Policy Settings that require a reboot or logon section in the following article, this setting needs a logon.
Deploying Group Policy Using Windows Vista
http://technet.microsoft.com/en-us/library/cc766208(v=WS.10).aspx
Best regards,
Frank Shen

UME change password in LDAP when this has expired

Hello,
I've configured SAP EP 2004 SP18, ume datasource is LDAP Active Directory, with SSL, and as administrator I can reset the password.
The problem appears when password is expired and the flag "user must change password" is marked in Active Directory and in the portal dosen't appear the form to the user to change the password.
If you read in ADS attribute "pwdLastSet" when is "0" means that the user must change password, I'm trying to map this attribute to ume attribute "passwordchangerequired", but it's not working, also are different formats.
The result is that in the portal login is not appearing the form to change the password when it's necesary, any ideas to map this active directory password or workaround...
Very thanks in advance.
Xavi.

same problem here ........ Iv'e set the UME expire date, and this works (kind of). The problem is that if both the Active Directory AND the UME are set to expire at 30 days, when the user logs on to the network on the 30th day, he is prompted to change his network password. Then as soon as he tries to log on to the portal he is prompted again (since the portal/ume doesnt know that the password has been changed in the active directory data source).
The user is prompted 2 times to change his password, and this is obviously confusing. And now his network password is different that what he just changed it to (since the portal / ume pw change changes the Act Dir password).
Any suggestions?
Thanks.

When I click on Facebook icon on Ipad2, all I get are grey images - no real content. However, when I open Safari, and then click go to Facebook, everything works normal. Any suggestions on how to fix the direct link?

When clicking directly on Facebook icon, cannot get images. When entering through Safari, and then going on line, images are fine. Any suggestions?

Thanks very much - worked like a charm!

When Firefox freezes, how can I shut it down, and re-start it without it automatically going to the site which caused the problem in the first place ?

I have Firefox set so that when I start up, I have it set so that it automatically goes to my home page. However when it freezes, which it does on a daily basis, and I have to shut it down and re-start, it automatically goes to the site which caused the problem in the first place.
If I was a hacker, I would probably find it quite fun to design a virus to reintroduce bugs after they had been exterminated - except that Firefox seem to have got there first.

Here's how:
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the search box above the list, type or paste '''sess''' and pause while the list is filtered
(3) Double-click the '''browser.sessionstore.max_resumed_crashes''' preference and enter 0 (that's a zero) and click OK.
When Firefox resumes after a crash, instead of resuming automatically, it will display a list of your previous windows and tabs and you can deselect problem pages.
(This assumes it wasn't a private browsing session.)

I dropped my ipad mini and the left side got dented .. so the volume buttons and the mute is not working anymore .... and when i am playing games the volume automatically goes up... i still have warranty .. so does apple replace a new one?

i dropped my ipad mini and the left side got dented .. so the volume buttons and the mute is not working anymore .... and when i am playing games the volume automatically goes up... i still have warranty .. so does apple replace a new one?

Steven ~ Welcome to the Support Communities. The following may be useful for next time...
AppleCare+ for iPad extends your coverage to two years from the original purchase date of your iPad and adds up to two incidents of accidental damage coverage, each subject to a $49 service fee. Note: AppleCare+ must be purchased within 30 days of the date you bought your new iPad.
iPad mini cases from Tech21
iPad mini screen protector from Tech21

When I go to my folders in the doc, the fan feature is not there. It stays in grid. I can click list. Once in list (and list only), the fan option returns. However when I click it, it just goes to automatic. My folders just have 3 items or less in them.

When I go to my folders in the doc, the fan feature is not there. I stays in grid. I can click list. Once in list (and list only), the fan option has returned. However when I click it, it just goes to automatic. My folders just have 3 items in them. How do I correct this? Quick note...when my son logs into his user account, the fan feature pops right up and works fine. Thanks!

Is the Dock on the bottom or the side? Fan is not an option with it on the side.

When Contract is expired and automatically goes to prepaid

Similar Messages

Maybe you are looking for