When copied to CD and taken to Local lab the color is awful
When I export files to CD and take to local lab to print images come out muddy and Dark. Why and how do I calibrate the monitor? I have gone through the calibration menu in System preferences. I have never had this issue from my pc.
Help me!
I have gone through the calibration menu in System preferences
Did you change the gamma to the PC 2.2 in the process? That makes the screen darker so that you can adjust the brightness to your liking before exporting. That can help somewhat. Also the color profile that is being used might have an effect. I've gone thru and set everything possible to the sRGB color profile as that seems to be the standard for printing and internet use.
Similar Messages
-
my desktop is not working when i open it all it does is show the color weal and it never gos away on my mac book pro how do i fix it?
It means, tentatively, that system files are missing or damaged and you will have to reinstall Snow Leopard. See the following:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/. -
when i purchase ringtones and they download directly to the music app on iphone, how can I move them to SOUNDS in SETTINGS so I can assign to various functions please?
You would have to create the ringtones.
Google will find several way to do this.
You cannot buy ready made ringtones from your computer. -
Light is flashing continueously on the front of the apple tv. No picture and no sound. Does anyone know what is wrong? Everything is plug in correctly. When I disconnect everything and re plug it in the apple icon comes up, but then blank screen with no sound and no picture. Does anyone know what is wrong?
l have an apple tv 2 generation please help meWelcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device) -
I can't burn a dvd using any method, idvd tells me that my super drive is missing, dvd studio pro quits when i click burn and disk utility keeps spitting the disk out when I click burn and enter the disk??? how do i repair my superdrive for imac, or how do I do whatever I need to do to get it working: I have already tried using a lens cleaning cd and also restored my nvram or something i forget what it was called but i restarted my computer holding down command+optoion+p+r and still nothing???
Free solutions are the best, although if I have to pay I will, I would prefer to not have to buy an external burner if possible and already know that is an option so please don't give me that answer... thank you for any help you can giveUnless your iMac is still covered by AppleCare, get an external DVD burner.
You can get perfectly good ones from Amazon for less than $40. -
how do you get your ipod touch to make a noise when people text you and to pop up on the screen my friend did something to her ipod to do this but i dont know how please help!!!!!!!!!!!!!!!!!!!!!!!!!!! its like she updated it but i already tried it!!!!!!i am very confused and want my ipod touch 4g like that please help thxns:)
Go to Settings>Notifications and turn alerts/sounds on for the app(s) in question. Not all apps have all options.
-
My Adobe say's I have a damaged iTunes LP and when I delete it and redownload it I get the same message . I have also lost several iTunes LP's since I purchased the iCloud Match this seriously annoys me. How do I fix this.
Hey Ancient Rocker,
If you are having issues with your purchased LP’s in iTunes, then the best way to get those back is to check in the previous purchase section of iTunes. The following article will take care of that part.
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/ht2519
If they do not show up then you can report the issue to iTunes.
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/HT1933
To report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase, follow these steps:
Find the email receipt for your purchase.
Click Report a Problem under the app that is having the issue.
When prompted, enter the Apple ID and password you used to purchase the item, then click Report a Problem.
Click Report a Problem next to the item you are having an issue with.
From the Choose Problem dropdown menu, choose the appropriate issue.
Follow the onscreen instructions and—if prompted—type a description of the problem into the text field.
Click Submit to have your issue reviewed.
Regards,
-Norm G. -
FCPX 10.0.7 collapses when working with 25p and 23,98p clips in the same timeline.
FCPX 10.0.7 collapses when working with 25p and 23,98p clips in the same timeline.
Did anybody reported this? never happened to me in previous versions.
It seems to be solved when transcoding the 25p clips to 23,98p (both Canon EOS 5dMKII clips)
But *** it must work!
ThanxFCPX 10.0.7 collapses when working with 25p and 23,98p clips in the same timeline.
Did anybody reported this? never happened to me in previous versions.
It seems to be solved when transcoding the 25p clips to 23,98p (both Canon EOS 5dMKII clips)
But *** it must work!
Thanx -
What does it mean when you call someone and it goes straight to the 3 beeps to mean cancelled
hi
what does it mean when you call someone and it goes straight to the 3 beeps to mean cancelled? this phone doesnt even ring, it just goes straight to the BEEP-BEEP-BEEP, its an iphone 4 and on IOS7 and it was ringing eailier on in the day when i spoke to this person. it wouldn't mean i have been blocked would it?
what does all this mean?
thanks
mrredrunner100i got my friend to message this person to see if they had the same problem, and the message went through and i think he got a reply, and all of a sudden this has started to work again (calls only) but apparently none of my messages went through that i have sent since the block activated. and they still havent even though there working again, and "apparently" a message was sent to me at 9pm today and it has never arrived. so imessage and text still isnt working, before i go asking this person about this, is this a genuine block or is there a phone problem?
-
My iTunes crashes when trying to start and says can't open the windows
My iTunes crashes when trying to start and says can't open the windows
did toy do all the recent updates?
-
I am trying to print a color photo on my MacBook Pro from iPhoto (not using Photoshop) using Epson 2200 printer, and everything I do in the Color Matching and Print Settings results in a photo with a pink cast to it. What am I doing wrong?
Have you checked the ink cartridges and made sure the nozzles are clear? Are you able to print from outside of iPhoto with the correct color?
Try the following: make temporary copy of the library and do the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iPhoto folder.
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
OT -
I've been having an ongoing problem with some of my images changing color/luminance values after merging or flattening an image. This seems to most often happen if I use one of the filters (like crosshatch or notepaper, not sharpen or blur). I can make a copy using command/option/shift + E which most often will look exactly like what's on screen.
Some people have suggested that it's to do with resolution, PS showing me a low resolution image but I don't think so because the histogram changes -- sometimes in a big way, but most often those spikes in the luminance levels are shaved off. Also, when I have the image open at 100% and effect a merge/flatten, the color changes.
I'd like to know if there's a way to have PS show me one for one what I'm working on while I'm working on it, or if there is a way to control the color profiles when I'm saving. My best guess at this point is that there is a color profile mismatch going on somewhere. I just don't know where to look for it.
Typically I work in 16 bit, so my color space is set to ProPhoto RGB; my camera is set to the Adobe color space;
color management policies are set to preserve color profiles;
conversion options --> intent is set to relative colorimetric.But it is calibrated. I use Xrite 1 and update it every month (on the first).
The colors can be really off. Here's an example.
https://flic.kr/p/r6A1Zd (what I want) https://flic.kr/p/qc5QTD (not what I want)
Also, I can't see how the bit depth will have any effect since the change in color happens in PS when I merge or flatten. It's 8 bit through the editing and 8 bit when I flatten it.
Have you any suggestions on what I can do on the computer side? -
I am trying to change the color of a background layer and it will not accept the color I want
I am trying to change the color of a background layer and it will not accept the color I want
If you want to get help you may have to provide a lot more details about what you are doing (which tools or commands do you use, what exactly happens when it fails, …)?
-
When I insert a shape, how do I change the color without changing the texture?
When I insert a shape, how do I change the color without changing the texture?
Hi,
you are working with a percentage width of your tables, for example:
table width="123%
td width="75%"
td width="25%"
So it is simply a arithmetic problem to get the proportional wide (means the ratio of % to cm) of your images, so that they do not break the frame. Certainly you could use (translated from German DW) "properties" and change the sizes there:
Hans-G. -
When using iCloud Calendar, I am unable to change the color of my work calendar. I have successfully followed the instructions to reset the colors of other calendars as desired. However, this one calendar always defaults to purple. Help!
File>New Calendar to create a new calendar (Groups are for grouping calendars and I should ignore them). When you've created the calendar, control-click on it in the sidebar and choose 'Get Info' There you can select a colour. You can have as many calendars as you like. When you create a new event you can select the calendar it belongs to, and hence the colour it has.
Maybe you are looking for
-
Transfer applications from old apple id to a new one ..
hi guys, i have a problem .. my boss's apple id has been hacked. The password didn't change, but the security questions and the forgot password email has been changed, so we can't reset or change the password. we've tried to add alternative email, an
-
How Do I transfer Pages document to a MacAir that doesn't run Mavericks?
I want to transfer a document (created in Pages 5.2) via a thumbe drive to a 4 year old MacAir that can't run Mavericks. The APP store on the MacAir won't allow a download of 5.2 (incompatabile). Is there a way I can get this document onto my MacAir
-
has anyone experienced this problem: I am editing in FCP 7.0.3 on a Mac 10.6.8 - I have a clip in the browser that is full frame and fine and it matches the other clips in my bins but when I drop it into the time line it becomes a fully zoomed in ver
-
Hwo to tell if Streams is up-to-date on the source database
Scenario: * Red Hat Enterprise Linux Server release 5.2, Oracle 11.1.0.7 * Streams is being used to replicate data from source DBSRC to target DBTRG * Weekly archiving job on DBSRC needs to check that there are no pending streams updates to DBTRG bef
-
Hi folks, I have an 80+ node network connected via a service provider managed MPLS VPN cloud. Each one of my 'spokes' connects to the provider edge (PE) router via a /30 subnet. All of my customer edge (CE) routers are in MARS, but of course the PE r