When creating a windows video several pictures display black screen although it plays fine in photoshop. What is causing this?
I have tried rebooting, recreating from scratch again, sometimes the pictures show broken in photoshop and I recreate the thumbnail and they look fine.
Take your MBP to an Apple store genius bar for a free diagnostic examination. Since these symptoms are 'regular' and not intermittent, they should be able to determine what the problem is and the cure.
ciao.
Similar Messages
-
T410 & Windows 8 Pro 64bit - display black screen after wellcome screen
I'm using T410 and Windows 8 Pro 64 bit.
Sometime, when i boot start Windows, after Wellcome , the screen is black.
But when i press Ctrl+Alt+Del, its' appear Task Maneger...vv.v...... but when i try lo login, after then, it's re-appear Black Screen (with cursor)
I updated BIOS.
Display was updated by Windows 8 (not manual)
Please help me fix this issue.
Thanks !!!Did you upgrade to Windows 8 or do a clean install?
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen -
Just recently I went about my usual workflow, doing everything in Lightroom I can and then completely the last touches in photoshop. Now especially if I sharpen in lightroom I am getting this horrible grain all over my photo when I open the exported lightroom image in Photoshop. It has nothing to do with zooming in on the image or anything.
Also, if I open the Lightroom exported image just as a photo and not in photoshop I do not see any of the grain that is appearing when I open it in Photoshop, what has happened here?*completing
-
I'm having problems with video play back in itunes 10.7.0.21 for windows 7. Video was playing fine, but now I'm having audio issues. Audio cuts in and out. Also video pauses and fast forwards. Does anyone know what would cause this all the suddenly? More importantly does anyone know how to fix this?
All sorted now. Thread can be closed!
-
I have a Macbook Pro purchased brand new. I take high quality pictures for customers, these display perfect on my laptop but appear CORRUPT on a USB stick. What is causing this? I can't seem to fix this issue. PLEASE HELP!!
I really need this issue resolved it is driving me insane!!! How can the images appear perfectly fine on my laptop then when transferring over to a USB stick they just corrupt!?Check out this site:
http://osxdaily.com/2012/04/22/format-drive-mac-pc-compatible/
That will show you how to format a USB stick for use on both PC and Mac.
If the problem continues take it to an Apple store and have them check it out.
>Also what s exFAT?<
From:
http://en.wikipedia.org/wiki/ExFAT
"exFAT (Extended File Allocation Table) is a Microsoft file system optimized for flash drives.[3] It is proprietary and patented."
That first site explains it at length. -
I reinstalled acrobat pro 9.0 on windows 7 Ultimate 64, it installed OK, When I open i get a large white popup screen which i cannot close... what to do?
Hey jeroenb16613921,
Please specify exactly when you get this white popup screen. While opening a PDF or launching Acrobat by double-clicking on the Acrobat icon.
If it comes when opening a PDF, then where is this PDF actually stored?
Let me know more on the same so that I can analyze the issue.
Regards,
Anubha -
Hi! My imac27 fusion drive late 2013 restarts randomly when using 30" Cinema Display.
32 GB Apple RAM, Mavericks 10.9.2
I'm using power outlets that eliminitates surge fluctuations.
What could cause this? What can i do? I', a bit desperate!Adapter: Apple Mini DisplayPort to Dual-Link DVI Adapter
I wonder what the "Fault CR2: 0xffffff80078ca4f0, Error code: 0x0000000000000000, Fault CPU: 0x0" is...
Panic log:
Anonymous UUID: 44957DF9-C5B4-5AE1-AD54-9C81A374FC95
Tue Mar 18 03:52:54 2014
panic(cpu 0 caller 0xffffff80052dbe2e): Kernel trap at 0xffffff800523404e, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffff80078ca4f0, CR3: 0x000000004329d056, CR4: 0x00000000001606e0
RAX: 0xffffff838906d000, RBX: 0xffffff838905d000, RCX: 0xffffff80058ca4f8, RDX: 0x0000000000000000
RSP: 0xffffff8394cbbd60, RBP: 0xffffff8394cbbd90, RSI: 0x0000000034089b0e, RDI: 0xffffff80058874c8
R8: 0x0000000000000001, R9: 0xffffff8394cbbe90, R10: 0x0000000000000020, R11: 0x0000000000000206
R12: 0x0000000000000005, R13: 0x000006005279d2e6, R14: 0xffffff80491ceb20, R15: 0xffffff80078ca4e8
RFL: 0x0000000000010046, RIP: 0xffffff800523404e, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0xffffff80078ca4f0, Error code: 0x0000000000000000, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff8394cbb9f0 : 0xffffff8005222fa9
0xffffff8394cbba70 : 0xffffff80052dbe2e
0xffffff8394cbbc40 : 0xffffff80052f3326
0xffffff8394cbbc60 : 0xffffff800523404e
0xffffff8394cbbd90 : 0xffffff8005233b17
0xffffff8394cbbdb0 : 0xffffff800524f18d
0xffffff8394cbbde0 : 0xffffff80052165da
0xffffff8394cbbe20 : 0xffffff80052163f4
0xffffff8394cbbe80 : 0xffffff8005213c1d
0xffffff8394cbbef0 : 0xffffff800521e043
0xffffff8394cbbf70 : 0xffffff80052c976d
0xffffff8394cbbfb0 : 0xffffff80052f3b46
BSD process name corresponding to current thread: Logic Pro X
Mac OS version:
13C64
Kernel version:
Darwin Kernel Version 13.1.0: Thu Jan 16 19:40:37 PST 2014; root:xnu-2422.90.20~2/RELEASE_X86_64
Kernel UUID: 9FEA8EDC-B629-3ED2-A1A3-6521A1885953
Kernel slide: 0x0000000005000000
Kernel text base: 0xffffff8005200000
System model name: iMac14,2 (Mac-27ADBB7B4CEE8E61)
System uptime in nanoseconds: 6598450610233
last loaded kext at 8144333788: com.apple.driver.AppleHWSensor 1.9.5d0 (addr 0xffffff7f874fb000, size 36864)
loaded kexts:
com.caiaq.driver.NIUSBHardwareDriver 2.6.0
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleRAID 4.0.6
com.apple.driver.AppleBluetoothMultitouch 80.14
com.apple.iokit.IOBluetoothSerialManager 4.2.3f10
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleGraphicsDevicePolicy 3.4.35
com.apple.driver.AppleMikeyDriver 2.6.0f1
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AGPM 100.14.15
com.apple.driver.ApplePlatformEnabler 2.0.9d1
com.apple.driver.X86PlatformShim 1.0.0
com.apple.driver.AppleHDAHardwareConfigDriver 2.6.0f1
com.apple.driver.AppleHDA 2.6.0f1
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.GeForce 8.2.4
com.apple.iokit.IOBluetoothUSBDFU 4.2.3f10
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleIntelHD5000Graphics 8.2.4
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleUSBDisplays 360.8.14
com.apple.driver.AppleMuxControl 3.4.35
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.3f10
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.AppleBacklight 170.3.5
com.apple.driver.AppleMCCSControl 1.1.12
com.apple.nvidia.NVDAStartup 8.2.4
com.apple.driver.AppleIntelFramebufferAzul 8.2.4
com.apple.driver.AppleIntelMCEReporter 104
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.AppleThunderboltIP 1.1.2
com.apple.iokit.SCSITaskUserClient 3.6.6
com.apple.driver.AppleUSBODD 3.4.1
com.apple.driver.CoreStorageFsck 380
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.driver.AppleUSBHub 666.4.0
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.5.1
com.apple.driver.AppleSDXC 1.5.2
com.apple.driver.AirPort.Brcm4360 831.21.63
com.apple.iokit.AppleBCM5701Ethernet 3.8.1b2
com.apple.driver.AppleUSBXHCI 670.4.0
com.apple.driver.AppleAHCIPort 3.0.0
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.kext.triggers 1.0
com.apple.driver.IOBluetoothHIDDriver 4.2.3f10
com.apple.driver.AppleMultitouchDriver 245.13
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.driver.DspFuncLib 2.6.0f1
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOAcceleratorFamily 98.14
com.apple.nvidia.driver.NVDAGK100Hal 8.2.4
com.apple.nvidia.driver.NVDAResman 8.2.4
com.apple.iokit.IOBluetoothFamily 4.2.3f10
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.iokit.IOSurface 91
com.apple.driver.AppleGraphicsControl 3.4.35
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.3f10
com.apple.driver.X86PlatformPlugin 1.0.0
com.apple.driver.AppleUSBAudio 2.9.5f4
com.apple.iokit.IOAudioFamily 1.9.5fc2
com.apple.kext.OSvKernDSPLib 1.14
com.apple.driver.AppleHDAController 2.6.0f1
com.apple.iokit.IOHDAFamily 2.6.0f1
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.driver.AppleSMBusController 1.0.11d1
com.apple.driver.AppleSMC 3.1.8
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.AppleGraphicsDeviceControl 3.4.35
com.apple.iokit.IOAcceleratorFamily2 98.14
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.driver.IOPlatformPluginFamily 5.7.0d10
com.apple.driver.AppleThunderboltEDMSink 2.1.3
com.apple.driver.AppleUSBHIDKeyboard 170.15
com.apple.driver.AppleHIDKeyboard 170.15
com.apple.iokit.IOUSBHIDDriver 660.4.0
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.6
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOUSBMassStorageClass 3.6.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.6
com.apple.driver.AppleUSBComposite 656.4.1
com.apple.driver.AppleThunderboltDPInAdapter 3.1.7
com.apple.driver.AppleThunderboltDPOutAdapter 3.1.7
com.apple.driver.AppleThunderboltDPAdapterFamily 3.1.7
com.apple.driver.AppleThunderboltPCIUpAdapter 1.4.5
com.apple.driver.AppleThunderboltPCIDownAdapter 1.4.5
com.apple.driver.CoreStorage 380
com.apple.iokit.IOUSBUserClient 660.4.2
com.apple.driver.AppleThunderboltNHI 2.0.1
com.apple.iokit.IOThunderboltFamily 3.2.7
com.apple.iokit.IO80211Family 630.35
com.apple.iokit.IOEthernetAVBController 1.0.3b4
com.apple.driver.mDNSOffloadUserClient 1.0.1b5
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOUSBFamily 675.4.0
com.apple.iokit.IOAHCIFamily 2.6.5
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.11
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 23
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.pthread 1 -
Windows Explorer doesn't display some files until I play or get info for them in iTunes.
Windows Explorer doesn't display some files until I play or get info for them in iTunes.
How do I get them to all show up in Explorer without playing them all one by one?I think I solved the problem by going to File -> Library -> Organize Library
-
I have an iphone 4, when I plug in headphones I can pick up music and only background sounds, but no voices. It happens on every video or movie I see, but music works perfectly fine. Did anyone else have this problem or was it just me? If not can anyone help me?
Hey there Srkupo,
It sounds like your vocal audio is not working with your headphones connected to your iPhone. I would start with the troubleshooting from the following article to help troubleshoot them named:
Resolve issues with iPhone, iPad, and iPod touch accessories
http://support.apple.com/kb/ts2634
Update your software
Install the latest version of iOS. You can see which version is on your iPhone by going to the About screen.
If the device doesn't update successfully, the issue might be with your device and not the accessory. Learn how to check your iPhone, iPad, or iPod touch.
Disconnect and inspect the accessory, then restart your device
Disconnect the accessory and turn it off, if possible.
Inspect the connection between the accessory and device and make sure that no debris or other damage is present.
Restart your iOS device by turning it off, then back on. When the Home screen appears, reconnect the accessory.
Try a different device
Make sure the issue is with the accessory, if possible. Always use an identical or similar, compatible device with the accessory you're troubleshooting.
If there's static coming from the left audio channel when you use headphones, try connecting the headphones to a similar device.
If the device isn't syncing when connected to the dock, connect it directly to the computer using the Apple 30-pin to USB Cable or try another USB port.
If you're using Lightning to 30-pin Adapter in a connection chain, try using the same adapter on a similar or identical device.
Restore iPhone, iPad, or iPod touch
Restore your iOS device. You should rarely need to use this step with an accessory issue. If the issue only affects a third-party accessory, contact the manufacturer before restoring the device.
If this does not resolve the issue could you elaborate on where you are listening to this content from to help isolate the issue?
Thank you for using Apple Support Communities.
All the very best,
Sterling -
After updating with the latest software, when trying to edit a photo, it disappears (black screen) or screen is full of lines. If I blindly crop or edit the photo, when I exit edit mode, those changes have been made, but obviously this is unacceptable. Is this a bug with the latest software update?
There are several possible causes for the Black Screen issue
1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). (On iPhoto 11 this option is under the File -> Reveal in Finder.) Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/ Library/ Caches...
5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
If none of these help: As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there? -
Downloaded a movie from iTunes to my iPad. 2 minutes into the movie it stopped and My Videos is stuck in black screen mode. So basically rented a movie and never watched it.
The EXACT same thing happened to me last night! Rented a movie; it had barely started and then froze. When I touch the video app icon, all I get is a blank, dimly lit screen. None of the other videos I own will display either. Was your problem ever resolved?
-
IOS adhoc displays black screen after launch
Hi,
my iOS application displays black screen after slash screen.nothing happens and couldn't see any proper errors on debug utility.
I can build adhoc using flash builder and it's works fine but problem occurs when I create ipa using dumped config file on command line(ant)
I'm using flex sdk 4.6 and AirSDK 15.0(overladed) .my application includes few native extensions.
mxmlc
mxmlc -load-config app-config.xml src/mobapp.mxml -output myapp.swf
adt
<target name="build-release-adhoc-package-ipa">
<echo>::building captive-runtime release-adhoc ipa..</echo>
<exec executable="${FLEX_BIN}/adt" failonerror="true">
<arg line="-package" />
<arg line="-target ipa-ad-hoc" />
<arg line="-storetype pkcs12" />
<arg line="-keystore ${provision.dir}/release-adhoc.p12" />
<arg line="-storepass 12345" />
<arg line="-provisioning-profile ${provision.dir}/release_adhoc.mobileprovision" />
<arg line="${adhoc.dir}/ios-adhoc.ipa" />
<arg line="${src}/mobapp-app.xml" />
<arg line="myapp.swf" />
<arg line="${icon.dir}/applicationIcon16.png" />
<arg line="${icon.dir}/applicationIcon32.png" />
<arg line="${icon.dir}/applicationIcon36.png" />
<arg line="${icon.dir}/applicationIcon48.png" />
<arg line="${icon.dir}/applicationIcon57.png" />
<arg line="${icon.dir}/applicationIcon72.png" />
<arg line="${icon.dir}/applicationIcon76.png" />
<arg line="${icon.dir}/applicationIcon114.png" />
<arg line="${icon.dir}/applicationIcon120.png" />
<arg line="${icon.dir}/applicationIcon128.png" />
<arg line="${icon.dir}/applicationIcon152.png" />
<arg line="${base.dir}/[email protected]" />
<arg line="-extdir ${src}/ane" />
<arg line="-platformsdk /Applications/Xcode.app/Contents/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPh oneOS.sdk" />
</exec>
</target>
please help.Hi,
my iOS application displays black screen after slash screen.nothing happens and couldn't see any proper errors on debug utility.
I can build adhoc using flash builder and it's works fine but problem occurs when I create ipa using dumped config file on command line(ant)
I'm using flex sdk 4.6 and AirSDK 15.0(overladed) .my application includes few native extensions.
mxmlc
mxmlc -load-config app-config.xml src/mobapp.mxml -output myapp.swf
adt
<target name="build-release-adhoc-package-ipa">
<echo>::building captive-runtime release-adhoc ipa..</echo>
<exec executable="${FLEX_BIN}/adt" failonerror="true">
<arg line="-package" />
<arg line="-target ipa-ad-hoc" />
<arg line="-storetype pkcs12" />
<arg line="-keystore ${provision.dir}/release-adhoc.p12" />
<arg line="-storepass 12345" />
<arg line="-provisioning-profile ${provision.dir}/release_adhoc.mobileprovision" />
<arg line="${adhoc.dir}/ios-adhoc.ipa" />
<arg line="${src}/mobapp-app.xml" />
<arg line="myapp.swf" />
<arg line="${icon.dir}/applicationIcon16.png" />
<arg line="${icon.dir}/applicationIcon32.png" />
<arg line="${icon.dir}/applicationIcon36.png" />
<arg line="${icon.dir}/applicationIcon48.png" />
<arg line="${icon.dir}/applicationIcon57.png" />
<arg line="${icon.dir}/applicationIcon72.png" />
<arg line="${icon.dir}/applicationIcon76.png" />
<arg line="${icon.dir}/applicationIcon114.png" />
<arg line="${icon.dir}/applicationIcon120.png" />
<arg line="${icon.dir}/applicationIcon128.png" />
<arg line="${icon.dir}/applicationIcon152.png" />
<arg line="${base.dir}/[email protected]" />
<arg line="-extdir ${src}/ane" />
<arg line="-platformsdk /Applications/Xcode.app/Contents/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPh oneOS.sdk" />
</exec>
</target>
please help. -
Hi
Re Mac intel... Firefox updated to 3.6.14 and advised Flash 10 be installed. I did this and now on YouTube videos all I see is a black screen with no play or pause button. System is OS X10.4.11
Do I need to uninstall Firefox and re load an earlier version and an earlier version of Flash etc... will I lose my bookmarks and firebug? If so not worth it.
Would really appreciate help so sad not to be able to view any YouTube. Many thanks, ClareHi again - since writing the above I have posted on Adobe>Webplayer>Flash forum the following request and will post on here if I receive a reply that works:
Firefox updated to 3.6.14 and then advised Flash 10 be installed. I did this and now on YouTube videos all I see is a black screen with no play or pause button. System is OS X10.4.11 Have now followed Adobe instructions to Uninstall Flash player on system and then Install Flash 10. But still at YouTube Safari says Flash 10 is needed and in FF shows a black box only. I use Intego virus barrier but this has never blocked an update before. Flash is enabled in Firefox and Safari.
eldnolb at Adobe forum advised: Go to this site and right click on the Flash logo, Settings, Display Settings. UNcheck the hardware acceleration.
http://www.adobe.com/software/flash/about/
But when I go to this page no logo appeared for me to right click on, which again means that Flash player is not working... so I could not access Settings, Display Settings, Uncheck etc. Was advised to start a new Mac entitled thread. Clare -
I have a MacBook Pro. When surfing the web it will eventually slow to a crawl. When this occurs, there will be a small multi-colored wheel spinning until my latest command is handled. What is causing this and is there a way that I can modify or prevent this from happening? Is there a setting that will prevent this?
When you next have the problem, note the exact time: hour, minute, second.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode, or until they start to repeat. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting. -
How can I get my ES2 loops to play correctly? I keep getting the message that the audio is not found when I drag the loops from my audio browser even though they play fine in the preview.
It's exactly as I stated. Whenever I try to drag these kinds of loops (ESX24 / software instrument loops? the ones marked in green with the white music note next to them) from the loop browser into the timeline a message comes up saying Audio Not Found for that loop. And a new track is created automatically when loops are dragged into the timeline, so I'm not creating some other random / synth instrument track so I'm not sure what the deal is... But perhaps I'll try creating a software instrument track first and then drag the loop into that track and see what happens - maybe there's something with the default settings that automatically creates audio tracks whenever loops are imported?
Maybe you are looking for
-
how to send an email to a mobile. we have to give only number of a mobile in to column. please give suggestions and what apis are used for this purpose and how to write a source code in java.
-
Xbox 360 to Thunderbolt Display
I have a "dinky" TV monitor and I was hoping to upgrade up some. I saw the new Thunderbolt Display, and as an Apple Lover, I feel in love. Is it possible for me to connect my Xbox 360 (through cords?) to an Apple Thunderbolt Display? I tried looking
-
Is there anyone out there that would like to help me code the flash jukebox that is in the samples. If you visit the link at the bottom of this post you will see what i need help with. I would like to get my music inside the jukebox along with some a
-
MBean getAttribute throw NullPointerException
Weblogic:10.3.5 JDK: 1.6.0_29 64bit Please help me figure it out: RuntimeException thrown by rmi server: javax.management.remote.rmi.RMIConnectionImpl.getAttribute(Ljavax.management.ObjectName;Ljava.lang.String;Ljavax.security.auth.Subject;) <Mar 21,
-
D-Link DBT-120 USB bluetooth adapter.
Hi all, does anyone know please if the led(s) on this should light up when it is inserted into a USB socket? I've tried several sockets on 2 macs, re-starts etc. but get "no bluetooth h/w" message. I wonder if the led should come on as soon as it's p