When creating an RFQ from a Requisition, Req doesn't clear Autocreate

Hello.
I am trying to research the Req to RFQ to Quotation to PO functionality.
When I autocreate a Req line into an RFQ, the REQ line doesn't clear Autocreate.
Why is that?
Thanks for any help.
Martin

Refer:
How To Achieve Functional Flow From Requisition Through RFQ/ Quotation to Purchase Order (Doc ID 422131.1)
<Admin edit - deleted MOS Doc>

Similar Messages

  • Using ME57 to create an RFQ from multiple lines on multiple PRs

    When using ME57 to create RFQs how can I select multiple line items from multiple purchase requisitions to turn into a single RFQ. If I select multiple lines and then use 'RFQ with Vendor', it only selects one line item.  After further research it appears that you can only create only line at a time (very time consuming). 
    If you use ME41 and create with reference to PR then you can not sort or filter columns to allow for easy consolidation.
    Another forum recommended the following when using ME57 which works but it again adds extra steps to the process.
         The whole process is as follows -
         1) When you are in the 'Assign and Process Purchase Requisition' screen, select related PR and then click on 'Without Vendor' icon to flag all PRs for RFQ processing.
         2) Select these PRs again and click further on 'Assignment Overview' icon (Shift and F5). The next screen will appear - Assign and Process requisitions - Overview of Assignments screen.
         3) Select the 'PReq' column and then click further on 'Process Assignment' icon (F2). The next screen will appear where you have to maintain the 'quotation deadline' information.
         4) Then click on 'Continue' icon (enter).
    [http://www.sapfans.com/forums/viewtopic.php?f=6&t=198768]
    So is there any way to either 1) enable sorting of data in ME41 or 2) use ME57 to create one RFQ from multiple line items of multiple purchase requisitions when selecting 'RFQ with Vendor'.

    What is the JPEG specs? What are the specs of the project you're working in?

  • Getting error when creating a RFQ in MM module" create rfq item overview"

    Hi,
    i am a beginer in SAP administration, users are getting this error message and i have done all my research and not able to resolve this issue.
    This error i am getting when creating a RFQ in MM module and when trying to save the screen "create rfq item overview" then it gives me a pop up box message " SAP SYSTEM MANAGER: WORK PROCESS RESTARTED, SESSION TERMINATED".
    Here are the details of teh system
    SAP Version :ideas 4.7
    Database :Oracle
    OS : windows 2003
    Module user is working on MM
    user working on it is a Super user with all the permissions
    SAP is configure to run under the  European date and decimal format.
    I have never done any database administration on it, it is a new install and has been rarely used.
    User creates a RFQ and when he tries saving it , seems like for the first time after either restarting the macine or restarting the service it might work and at time it might not, this is a very sporadic error and most of the times it crashes out with the message "sap system manager:work process restarted, session terminated" and kicks the user out of the session.
    Below are the details of the error message from ST22 :
    name of the runtime error : system_core_dumped
    below are the details of the error message and its resoltion as suggested by sap help :
    ========
    Runtime Errors         SYSTEM_CORE_DUMPED           
           Occurred on     01.02.2008 at 07:52:19
    Process terminated by signal " ".                                             
    What happened?
    The current ABAP program had to be terminated because the                     
    ABAP processor detected an internal system error.                             
    The current ABAP program "SAPLCLSC" had to be terminated because the ABAP     
    processor discovered an invalid system state.                                 
    What can you do?
                                                                                    Make a note of the actions and input which caused the error.                                                                               
    To resolve the problem, contact your SAP system administrator.                                                                               
    You can use transaction ST22 (ABAP Dump Analysis) to view and administer      
    termination messages, especially those beyond their normal deletion           
    date.                                                                               
    Error analysis
    An SAP System process was terminated by an operating system signal.           
                                                                                    Possible reasons for this are:                                                
    1. Internal SAP System error.                                                 
    2. Process was terminated externally (by the system administrator).           
               Last error logged in SAP kernel                                    
                                                                                    Component............ "Taskhandler"                                           
    Place................ "SAP-Server server1_DEV_00 on host server1 (wp 1)"      
    Version.............. 1                                                       
    Error code........... 11                                                      
    Error text........... "ThSigHandler: signal"                                  
    Description.......... " "                                                     
    System call.......... " "                                                     
    Module............... "thxxhead.c"                                            
    Line................. 9555                                                                               
    How to correct the error
    The SAP System work directory (e.g. /usr/sap/c11/D00/work ) often             
    contains a file called 'core'.                                                                               
    Save this file under another name.                                                                               
    If you cannot solve the problem yourself, please send the                     
    following documents to SAP:                                                                               
    1. A hard copy print describing the problem.                                  
       To obtain this, select the "Print" function on the current screen.         
                                                                                    2. A suitable hardcopy prinout of the system log.                             
       To obtain this, call the system log with Transaction SM21                  
       and select the "Print" function to print out the relevant                  
       part.                                                                               
    3. If the programs are your own programs or modified SAP programs,            
       supply the source code.                                                    
       To do this, you can either use the "PRINT" command in the editor or        
       print the programs using the report RSINCL00.                                                                               
    4. Details regarding the conditions under which the error occurred            
       or which actions and input led to the error.                                                                               
    System environment
    SAP Release.............. " "                                                                               
    Application server....... " "                                                 
    Network address.......... " "                                                 
    Operating system......... " "                                                 
    Release.................. " "                                                 
    Hardware type............ " "                                                 
    Character length......... " " Bits                                            
    Pointer length........... " " Bits                                            
    Work process number...... " "                                                 
    Short dump setting....... " "                                                                               
    Database server.......... " "                                                 
    Database type............ " "                                                 
    Database name............ " "                                                 
    Database owner........... " "                                                                               
    Character set............ " "                                                                               
    SAP kernel............... " "                                                 
    Created on............... " "                                                 
    Created in............... " "                                                 
    Database version......... " "                                                                               
    Patch level.............. " "                                                 
    Patch text............... " "                                                                               
    Supported environment....                                                     
    Database................. " "                                                 
    SAP database version..... " "                                                 
    Operating system......... " "                                                 
    User, transaction...
    Client.............. " "                                                      
    User................ " "                                                      
    Language key........ " "                                                      
    Transaction......... "ME41 "                                                  
    Program............. "SAPLCLSC"                                               
    Screen.............. "SAPMM06E 0320"                                          
    Screen line......... 71                                                       
    Information on where termination occurred
    The termination occurred in the ABAP program "SAPLCLSC" in "EXECUTE_SELECT".  
    The main program was "SAPMM06E ".                                                                               
    The termination occurred in line 131 of the source code of the (Include)      
    program "LCLSCF2G"                                                           
    of the source code of program "LCLSCF2G" (when calling the editor 1310).      
    =============
    i even tried increasing the dialog processes but with no use.The same error occurs.
    I appreciate every one of help i can get, i am working on a deadline which is tomorrow evening to resovle this issue, any kind of help is highly appreciated.
    thanks
    mudessir.

    Hi Mudessir,
    With the help of ABAP'er try the following.
    1. open the program 'LCLSCF2G' from SE38.
    2. Keep a break point at line no: 131.
    There is 'END SELECT' statement which is getting failed at line no 131 in the program.
    Try to analyse the SY-SUBRC at that point.
    If your technical consultant can't solve this, write to SAP OSS (service.sap.com).
    I have searched SAP OSS, there are other situations, but your case is not there. So write to SAP if technical consultant can't solve it by debugging the program.
    Regards,
    Madhu.

  • Where are files downloaded to on the mac when creating a pdf from web pages?

    where on the mac HD are files downloaded to  when creating a pdf from web pages?
    Im creating web pages from the whole site so creating a large document, so wondered where these fiels are stored on the mac so I can delete when finished as dont want to clog up the hard drive.

    Look at the LiveCycle server products.

  • When creating a PDF from a PPT or Keynote application on a Mac using Acrobat X Pro, how do I ensure it can be opened on a PC? Do I need to save as a particular version of Acrobat?

    When creating a PDF from a PPT or Keynote application on a Mac using Acrobat X Pro, how do I ensure it can be opened on a PC? Do I need to save as a particular version of Acrobat?

    The system was not my own, it was on a PC belonging to the school where I teach. The error message referred to Acrobat 9.0, so I assume that the problem is to do with the version on which the file was created being more recent than that on which I attempeted to open it.

  • When creating a PDF from the scanner, it only scans one side despite the settings.

    When creating a PDF from the scanner, it only scans one side. I am using a fi-7160 that supports scanning both sides at once. The Scanner software is configured to scan both sides, and so are the presets in Adobe Acrobat Pro. I've only gotten the setting to work with the Custom Scan setting. Has anyone else had this problem, and what is the solution?
    Additionally, the software bundled with the scanner with automatically omit the back sides of a page if it is blank. I am scanning large files with occasional double sided pages. Is there a way to avoid having to manually delete blank pages when creating a new PDF from the scanner? It takes twice as long because I'm using the OCR stabilization.

    Hi anne,
    Could you please let me know what Acrobat and OS version are you using.
    Does this happen in case of any particular PDF or all PDF files?
    Try repairing Acrobat and then again check.
    Hope to get your response.
    Regards,
    Anubha

  • Creating a new connection when creating a report from scratch

    I've searched all around but I haven't managed to find any samples or forum posts that show how to create a connection when creating a report from scratch via RCAPI.  All of the code that I've found has been aimed at replacing the ConnectionInfo for an existing connection.  I figured that it would work something like this:
    m_crystalReport.setReportAppServer(ReportClientDocument.inprocConnectionString);
    m_crystalReport.newDocument();
    IConnectionInfo ci = new ConnectionInfo();
    PropertyBag propertyBag = new PropertyBag();
    propertyBag.put("Use JDBC", true);
    propertyBag.put("Connection URL", "jdbc:jtds:sqlserver://localhost:1433;databaseName=" + DB_NAME);
    propertyBag.put("Database Class Name", "net.sourceforge.jtds.jdbc.Driver");
    propertyBag.put("Database DLL", "crdb_jdbc.dll");
    ci.setAttributes(propertyBag);
    m_connection = new Connection();
    m_connection.setConnectionInfo(ci);
    m_connection.open();
    but this produces a NullPointerException within Connection.open().  If I leave the connection closed but add it to the report via DatabaseController.addConnection() then I just get the exception later on when I try to add tables using the connection.
    Can anyone give me any pointers please?
    Thanks,
    Rich.

    Just in case anyone else runs into this, I managed to fix it by leaving the connection closed and then using the connection info instead of the connection when creating tables, eg:
         ITable t = new Table();
         t.setAlias(v.getAlias());
         t.setName(v.getView().getName());
         t.setConnectionInfo(m_connectionInfo);
         getDatabaseController().addTable(t, null);

  • Userexit or BADI to change service price when create PO reference from PR

    Hi,
    I need userexit or Badi to change the gross price ( ESLL-TBTWR ) when create PO reference from PR.  Currently , when I do this it will recalculate the gross price based on the service master and ignoring whatever the price put in PR.  Could anyone tell me userexit or Badi that would allow me to change the price when i create PO from PR via ME21N.
    Thanks,
    Gilbert

    Hi Gilbert,
    You can try using Function Exit EXIT_SAPLMLSP_030 of Enhancment SRVESLL.
    This Function Exit has ESLL data as changing parameter.
    But this Function Exit is called from a number of transaction. So do put in correct checks (like sy-tcode or sy-ucomm) before substituting any values. If proper checks are not put in then values may be substituted when this function exit is called from other transactions (like tcode "ML81N").
    Hope this will help.
    Regards,
    Abhisek.

  • Create Purchasing Order from Purchasing Requisition

    Hi,
    I need to create in a report a Purchasing Order from Purchasing Requisition. I have seen the Bapi BAPI_PO_CREATE; Can I create order from requisition without fill all field and only 
    the requisition and ther obligatory field?
    Thanks
    Francesco

    Hi
    Try out what all parameters are obligatory in case of Purchase Requsition using the FM - 'BAPI_REQUISITION_CREATE' in R/3 back-end..
    and then try creating PO using 'BAPI_PO_CREATE1' or 'BAPI_PO_CREATE' Function modules.
    Also try creating P Req manually using ME51N / ME51 Transactions and debug the process to get further details, if any.
    Regards
    - Atul

  • Error when Creating a PO from an Awarded RFP

    Hello ESO Experts.
    I have a Question of integration topic.
    I was trying to create a PO from RFP that was alredy awarded. When i went to the tab Awards , selected Scripts  -> Publish to ERP i got the next error
    ID: Content is not allowed in prolog.
    What do i have to do in order to create succesfully the PO?
    Thanks...
    Edited by: sebastian.montero on Aug 25, 2011 12:04 AM

    Hi
    We can not create a PO from and info record, we can only refer the info recodrd for the price and conditions during PO creation for the vendor/material/pur orgn. concerned . A PO  can be created by referring  a PR / RFQ / Contract only. 
    Regards
    Edited by: samuel mendis on Jan 25, 2010 11:58 AM

  • How To Add Additional Fields When Creating New Contact From w/in Mac Mail?

    Hi there. When in Mac Mail and clicking on contact information provided within an email, we are able to either (1) CREATE NEW CONTACT or (2) ADD TO EXISTING CONTACT (by clicking on the arrow next to a phone number, address, etc.). If I choose "Create New Contact," how can I add additional fields BEFORE clicking on "Add to Address Book" button in lower right corner? Let's say, for example, I know this new contacts URL or company. (Currently, I am creating the new contact from within Mac Mail and then going to Address Book and finding the contact, then editing, the adding the additional fields, then saving, and then going back to Mac Mail. This all takes time.)
    Note: When creating a new iCal event from within Mac Mail, we can click on Option/Alt key when selecting drop-down arrow...and this will allow us to add additional information. The same feature isn't available for address book???

    I have the exact same question and problem. If there was a way to automatically open the AB entry after "creating new contact" this would solve it.
    Thanks for any suggestion

  • Hyperlinks not converting when creating a pdf from Word 2010 to Adobe Acrobat 11.0.6

    First off, let me say that these are not table of contents hyperlinks.  I have created a document in Word 2010 (not a MAC) with hyperlinks to files residing on our company's intranet.  In Word the hyperlinks work great but when I create the pdf, the links do not work.  I have converted using both PDFMaker from Word and Create a pdf from within Acrobat.  Yes, I have all the boxes checked regarding saving links.  The links appear to work partially.  Meaning that when I hover the cursor over the link, the pointy finger appears but when I click I get a pop-up message telling me the file could not be opened.  Also, when I hover over the hyperlink, the address appears.  So, I think it knows there's a link and it tries to open but can't.  When I create the file within Adobe the link works - once.  When I click on the link I get a pop-up window asking me if I want to save my file before closing.  After my response the file closes and the linked file opens.  However, when I go back into the file and try the hyperlink again, I get the pop-up telling me the file cannot be opened.  HELP!  I am at my wits end.  After spending hours yesterday trying to research (I think I read every thread related to hyperlinks but I am not using a Mac, table of contents or Adobe 7 around which it seems all the prior questions revolve) and futily creating and recreating the pdf (as if doing the same thing repeatedly would somehow magically work) I am about to give up.  This is a document that will be published to our intranet for use by employees which cross-references other documents to which they can refer for additional information.  I would prefer to publish a pdf and not a Word document.  Any suggestions would be appreciated.

    Thanks for your input Bill. I've checked the preferences and "view large images" is turned on. It's not all of the images which are missing, only certain ones do not transfer over to PDF.

  • Help!PO inbound ERROR in SRM SUS when create a PO from R/3

    Hi All:
         I met a problem in SRM SUS,when create a po in R/3 and send this PO to SRM SUS,but there was a  error in XI monitor t-code:SXMB_MONI, i have created the buyer via t-code: BBP_SUS_BP_ADM,and sent the vender from R/3 that is ok.
        check this xml.plesse take a look at error information.
         <FAULT_TEXT>An error occured within an XI interface: Exception occurredA:BBP_BUPA:263 -Ordering party has to be a company Programm: CX_BBP_BD_ERROR===============CP; Include: CX_BBP_BD_ERROR===============CM002; Line: 57</FAULT_TEXT>
         <FAULT_URL />
         I am used  SRM server 5.5, package level is SAPKIBKT06.
         Plesse help....
    Thanks
    Best Regards

    At least i did it.
    The solution was in the transaction BUPA_TAXNUMTYPE. Here you can define wether you want to check the duplicated TAXNUMBERS or not. After applying some patches we think the value of the entry corresponding to our country, changed. So we put the value to OFF and everything worked fine again.
    Thank you.

  • Serial number copy functionality when creating return orders from standards

    Hi all,
    Serial number is not copying when i create return order from the standard orders in below scenario.
    I implemented one BADI for copying Serial number to Sales order when doing Post goods receipt.
    So after doing inbound delivery and PGR, serial number is copied to the sales order but when i create return order with reference to the Standard order Serial number is not copying.
    When i go VA02 for standard order and selecting the technical objects then if i create the return order serial number is copying.
    Please help me in the above issue.
    I used the following logic to copy serial number from inbound delivery PGR.
    UPDATING THE SERIAL NUMBER TO THE RESPECTINVE SALES ORDER LINE ITEMS
                CALL FUNCTION 'SERNR_ADD_TO_AU'
                  EXPORTING
                    sernr                 = lwa_sernr-sernr
                    profile               = 'NEOP'
                    material              = lwa_mseg-matnr
                    quantity              = 1
                    document              = lwa_mseg-kdauf
                    item                  = lwa_mseg-kdpos
                    debitor               = lwa_mseg-kunnr
                    vbtyp                 = 'C'
                    sd_auart              = lv_auart
                    sd_postyp             = lv_pstyv
                  EXCEPTIONS
                    konfigurations_error  = 1
                    serialnumber_errors   = 2
                    serialnumber_warnings = 3
                    OTHERS                = 4.
                IF sy-subrc = 0.
                  CALL FUNCTION 'SERIAL_LISTE_POST_AU'.
                IF sy-subrc EQ 0.
                  COMMIT WORK.
                  WAIT UP TO 2 SECONDS.
                ENDIF.
    Edited by: Rajesh Sanapala on Feb 16, 2009 12:48 PM

    hi.
    I have the same problem.
    Can you please share how you solved it?
    thank you
    Bill

  • PDF Bookmarks - Change Default Width When Creating PDF File from InDesign

    When creating a PDF file (from Indesign CS4) I automatically create the PDF bookmarks based on the InDesign document's Table of Contents.
    But by default the width in the bookmarks is always set at "Fit Page".
    Is there a way to change the default to "Fit Width" in Indesign before the PDF is created?
    It's too much trouble to change every bookmark in the PDF after it's created.
    Thanks for any help in advance!

    Thanks, Steve. I have actually previously done what "fogharty" suggests and it does work if I want to set the pages to "fit width" or a variety of other options. However, none of the options is inherit zoom which is what I, and many other from the sound of the thread, need and want. We want to respect our end users--not dictate how they must view our PDFs. Hopefully, Adobe will listen and make this option available soon.

Maybe you are looking for