When creating COPA data source, the Period/year become mandatory selection
hi friends,
I create a standard COPA datasource for account based COPA. however, when I use RSA3 to test load the data, I found that the financial period(PERIO) become a mandartory selection. this will cause that the initiall and delta load can only in a period.
so do anybody konw how to elimate this mandatory selection condition? where to configure it?
or I have to convice customer do the initial and delta load every year?
please advice, very very thanks!
hi Pravender,
thanks very much for your solution. I did check the table TKEBWF, and system does set PERIO as MANDATORY there, however, there are below two inconsistent for this note:546238.
1. my system PI package level is PI_BASIS 2005_1_700, which is higher than affected releases.
2. there is another account based COPA datasource which has already generated for another operating concern, which does not set 'Period' as mandatory.
so I suspect why other data souce do not do this change and still can make period as non-mandatory. is there any other place to configure?
thanks again!
Edited by: Henry Jiang on Mar 30, 2010 10:03 AM
Similar Messages
-
Error with JNDI when creating new data source
Hi :
This weekend, while adding new applications to the production environment we ran into a problem where the JNDI tree of the new managed servers was unreachable.
The error message we saw was:
<1364066840022> <BEA-149231> <Unable to set the activation state to true for the application 'EOI'.
weblogic.application.ModuleException:
at weblogic.jdbc.module.JDBCModule.activate(JDBCModule.java:349)
at weblogic.application.internal.flow.ModuleListenerInvoker.activate(ModuleListenerInvoker.java:107)
at weblogic.application.internal.flow.DeploymentCallbackFlow$2.next(DeploymentCallbackFlow.java:411)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:74)
at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:66)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:635)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
at weblogic.application.internal.SingleModuleDeployment.activate(SingleModuleDeployment.java:16)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:162)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:42)
at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:187)
at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:21)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
weblogic.common.ResourceException: is already bound
at weblogic.jdbc.common.internal.RmiDataSource.start(RmiDataSource.java:387)
at weblogic.jdbc.common.internal.DataSourceManager.createAndStartDataSource(DataSourceManager.java:136)
at weblogic.jdbc.common.internal.DataSourceManager.createAndStartDataSource(DataSourceManager.java:97)
at weblogic.jdbc.module.JDBCModule.activate(JDBCModule.java:346)
at weblogic.application.internal.flow.ModuleListenerInvoker.activate(ModuleListenerInvoker.java:107)
at weblogic.application.internal.flow.DeploymentCallbackFlow$2.next(DeploymentCallbackFlow.java:411)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:74)
at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:66)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:635)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
at weblogic.application.internal.SingleModuleDeployment.activate(SingleModuleDeployment.java:16)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:162)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:42)
at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:187)
at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:21)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
We traced the issue to a new data source that was added were we found that along with the the expected jndi name entry in the jdbc xml file, there were two blank entries:
<jndi-name>weblogic.jdbc.DataSource.EOI</jndi-name>
<jndi-name></jndi-name>
<jndi-name></jndi-name>
The data source was deleted, consoles restarted, the data source recreated and the issue occured again. To get by the issue we had to manually remove the blank tags from the xml file.
We created 2 new data sources, and it only happened on the one. The same data source each time. Additionally, this issue did not occur when these changes were made in our lower (development, qa) regions.
The version is the same in all three regions.
WebLogic Version:
WebLogic Server Temporary Patch for 9324911 Wed Feb 03 22:38:01 PST 2010
WebLogic Server 10.3 Fri Jul 25 16:30:05 EDT 2008 1137967
Is this a known issue? And if so, is there a way to avoid it, other than to start constantly checking the newly created XML files?
Thank you
tedYes, this is a common issue and documented in Oracle Docs:
WebLogic Server: Getting "weblogic.common.ResourceException: is already bound" exception with JDBC JNDI name (Doc ID 1154250.1)
The only fix is that you need to remove the empty value entries.
Cheers!!
AJ -
401: Unauthorized when creating report data source in sharepoint 2010
Hi All,
I am getting 401: Unauthorized error when trying to create a report datasource in sharepoint 2010. Same login is able create to datasource in one system,, but only with one system it causing this issue.
Is it system or browser issue ? Please let me know.
Soumya DasHello Soumya Das,
Sounds like a system issue, can you check your ULS logs if you see some more information on the HTTP 401 Unauthorized?
Btw, have you also checked the Reporting Services configuration. Maybe this article can help:
http://technet.microsoft.com/en-us/library/bb326356(v=sql.105).aspx
- Dennis | Netherlands | Blog |
Twitter -
Not able to create a Data source with qty filed in the table
Hi i am having scenario.
i am doing a Genric R/3 extraction for R/3 system. I created a view from two tables. I have added a net quantity field also in then view table. But when i created a data source for that view it is showing a error message which says that it cannot create a data source with a quantity field in the table.
Here is my question. How to create a Data Source for a view table which has Qty filed in it.
Pls help with this.
SenthilHi Sensai,
U need to add reference table for the unit .... when added into the view u create .......the reference table name u can find in the table itself from where it is brought into the view.... in the table currency quantity fields........
U can add that table in the currency /quantity fields of the view....u need to add referecne field and table...and activate ........
i think it works
Regards
vamsi -
How to create Geniric data source using the SAP FUNCTION MODULE
Hi,
I want to create genric data source using function module
MD_STOCK_REQUIREMENTS_LIST_API (delivered by sap)
for this function module where I can find Extract Structer
or I have to create ?
How can i use this ?
Thanks in AdvanceHi Shilpa,
Check here..........
Using function module as the generic extractor
Generic Delta Update using Function Module
Document regarding R/3 extractors using function module/user exits
Generic extractors using FM -
Hi experts,
I created one data source for copa
in rsa2 No errors
when I go to rsa3 it,s showing error msgs
It,s termanating when i check the log(in rsa3)
Msg is probelm calss is very important 1
incorrect field name for selection
How can i sol this error ?Hi Shilpa,
Where exactly did you generate the DataSource?
You can do it in a couple of ways.
1. Through SBIW in R/3, through the meny tree.
2. Run Report RKEBW100 in SE38.
3. 1_CO_PA_<any name>
4. Select Create Radio Button.
5. Give the Operating Concern name
6. Select the Fields in the next screen.
7. Click on Info Catalogue and you are done.
In RSA3 check if there are any mandatory fields to which you have to pass values and then execute.
Regards,
Tom. -
COPA data source does not allow delta - once more
Hello,
When I try to generate COPA data source (tran KEB0) the system already have "Generic delta" in delta method field.
I want to use timestamp instead of that. How I can switch to timestamp?
AAll COPA datasources are timestamp based (which is a generic delta method).
I do not think you have an option to change it (not that there is any need since it already is what you want ie timestamp based), the system automatically creates a timestamp based delta method (each delta extracting records upto 30 min back from the current extraction time). Do not worry about the 'generic delta method' appearing in your KEB0. -
PLIKZ field for COPA data source not there in Extract structure.
Hello all,
When I create a data source for COPA the PLIKZ field from the segment level is not maintained in the Extract structure and it is not replicated to BW also. But the other field GJHAR is maintained in the Extract structure which is also there in the segment level!!
Clarify me why it is not available in extract structure? Also we are in 4.7 version and 3, 5 in BW.
Points will be assigned!!!
Thanks
RamHello Friends,
Could some one help me why the field PLIKZ is not available in the Extract structure when i create a COPA Data source?
Need ur suggestions urgently!!!
Helps please
Thanks in advance once again -
COPA data source - add a field
Hi Experts,
I got answer to the question that I asked for adding ship-to party to COPA data source and in operating concern.
Now, when I go to KEB0 and display datasource, it doesnt show my added field ship-to party as checked.
so, help me understanding
1) how can I apply the change in operating concern to datasource? or make field visible in extract structure
2) if i delete the datasource and re-create it, will my CE1XXXX, CE2XXXX, CE3XXXX, CE4XXXX are cleared or not?
3) I have active delta running on COPA datasource, what are the steps to ensure contnuity of this delta?
4) if i need to fill newly added field in the CE1XXXX, CE2XXXX, CE3XXXX, CE4XXXX tables (historical value for ship-to), how can I achieve this?
5) what steps I need to take care while transporting these changes to prod?
Thanks,
PurvangHI,
Following steps will help you...
1) use "KEQ3" to activate "KUNWE" characteristics for Ship-to Party
2) Add the field in your data structure in tcode "KEA0".
3) Activate and generate the "Operating concern"
Please revert back if you still need help.
Regards -
Creating new Data Source Error - Database connection Failed
Successfully installed and configured 11.1.1.3.0. Planning and Essbase dev.
Went to Workspace > Administer > Classing Planning Administration > Manage Data Sources > Create Data Source.
Entered all info about the application database , etc. Getting error "The database connection failed" (I was able to connect with no problem during the install)
SQL server 2005 is on the same physical server.
The diagnostic tool shows database connection passed for planning. A new database was created for the new application.
The server event viewer shows these errors.
"Login failed for user 'xxx-hyperion'. The user is not associated with a trusted SQL Server connection."
Group Policy Error "The client-side extension could not apply computer policy settings for 'Default Domain Policy {xxx}' because it failed with error code '0x80070003 The system cannot find the path specified.' See trace file for more details. "
The Group Policy client-side extension Group Policy Services failed to execute. Please look for any errors reported earlier by that extension.
Any help is appreciated.Datasource for the application.
I have created a sql db for this planning application (my datasource). See my first message for more details.
When you create a new planning application, you need to associate it with a data source. Since this is a new install, I don't have any data sources available yet.
So, "To create, edit or delete data sources, click Manage Data Source."
This page lets you validate your connection to the database and essbase server. My essbase server connection validates! The database connection does not validate after I enter all the relevant information.
SCREEN INFO BELOW
Fields displayed with an asterisk (*) are mandatory.
Data Source Name *:
Data Source Description:
Select Database Platform
Microsoft SQL Server
Application Database
Server * :
Port * :
Database *:
User *:
Password *:
Click "Validate Database Connection"
ERROR ---> Database connection failed.
So it does not let me create a data source for my new planning application, so I cannot create a new planning application.
Thanks in advance. -
Can't create a data source on weblogic 9.2
I tryed to create a Data Source on Weblogic 9.2 to Oracle 9.2.0.5. Ocurrs the exception below:
####<Jul 15, 2009 5:19:34 PM BRT> <Info> <Console> <mocoes> <SOA_ALDS_HOM_Admin> <[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <a0016433> <> <> <1247689174163> <BEA-240001> <Attempting to instantiate SharedFlowControllers for request /console/jdbc/GlobalJDBCDataSourceTable.do>
####<Jul 15, 2009 5:19:34 PM BRT> <Info> <Console> <mocoes> <SOA_ALDS_HOM_Admin> <[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <a0016433> <> <> <1247689174164> <BEA-240001> <<ConsoleInteraction: User is viewing <com.bea.console.actions.jdbc.datasources.GlobalDataSourceTableAction> for <*> <com.bea.console.handles.JMXHandle%28%22com.bea%3AName%3DVivoSafeDataSource%2CType%3Dweblogic.j2ee.descriptor.wl.JDBCDataSourceBean%2CParent%3D%5BSOA_ALSDS_HOM%5D%2FJDBCSystemResources%5BVivoSafeDataSource%5D%2CPath%3DJDBCResource%5BVivoSafeDataSource%5D%22%29>>>
####<Jul 15, 2009 5:19:45 PM BRT> <Info> <Console> <mocoes> <SOA_ALDS_HOM_Admin> <[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <a0016433> <> <> <1247689185241> <BEA-240002> <Struts module is configured to use com.bea.console.internal.ConsolePageFlowRequestProcessor as the request processor, but the <controller> element does not contain a <set-property> for "controllerClass". Page Flow actions in this module may not be handled correctly.>
####<Jul 15, 2009 5:19:45 PM BRT> <Info> <Console> <mocoes> <SOA_ALDS_HOM_Admin> <[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <a0016433> <> <> <1247689185241> <BEA-240001> <Attempting to instantiate SharedFlowControllers for request /console/ChangeManagerAction.do>
####<Jul 15, 2009 5:19:45 PM BRT> <Info> <Console> <mocoes> <SOA_ALDS_HOM_Admin> <[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <a0016433> <> <> <1247689185244> <BEA-240001> <Attempting to instantiate SharedFlowControllers for request /console/com/bea/console/actions/systemstatus/begin.do>
####<Jul 15, 2009 5:19:45 PM BRT> <Info> <Console> <mocoes> <SOA_ALDS_HOM_Admin> <[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <a0016433> <> <> <1247689185280> <BEA-240002> <Struts module is configured to use com.bea.console.internal.ConsolePageFlowRequestProcessor as the request processor, but the <controller> element does not contain a <set-property> for "controllerClass". Page Flow actions in this module may not be handled correctly.>
####<Jul 15, 2009 5:19:45 PM BRT> <Info> <Console> <mocoes> <SOA_ALDS_HOM_Admin> <[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <a0016433> <> <> <1247689185280> <BEA-240001> <Attempting to instantiate SharedFlowControllers for request /console/MessagesAction.do>
####<Jul 15, 2009 5:19:45 PM BRT> <Info> <Console> <mocoes> <SOA_ALDS_HOM_Admin> <[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <a0016433> <> <> <1247689185282> <BEA-240002> <Struts module /jdbc is configured to use com.bea.console.internal.ConsolePageFlowRequestProcessor as the request processor, but the <controller> element does not contain a <set-property> for "controllerClass". Page Flow actions in this module may not be handled correctly.>
####<Jul 15, 2009 5:19:45 PM BRT> <Info> <Console> <mocoes> <SOA_ALDS_HOM_Admin> <[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <a0016433> <> <> <1247689185282> <BEA-240001> <Attempting to instantiate SharedFlowControllers for request /console/jdbc/GlobalJDBCDataSourceTable.do>
####<Jul 15, 2009 5:19:45 PM BRT> <Info> <Console> <mocoes> <SOA_ALDS_HOM_Admin> <[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <a0016433> <> <> <1247689185282> <BEA-240001> <<ConsoleInteraction: User is viewing <com.bea.console.actions.jdbc.datasources.GlobalDataSourceTableAction> for <*> <com.bea.console.handles.JMXHandle%28%22com.bea%3AName%3DVivoSafeDataSource%2CType%3Dweblogic.j2ee.descriptor.wl.JDBCDataSourceBean%2CParent%3D%5BSOA_ALSDS_HOM%5D%2FJDBCSystemResources%5BVivoSafeDataSource%5D%2CPath%3DJDBCResource%5BVivoSafeDataSource%5D%22%29>>>
####<Jul 15, 2009 5:19:55 PM BRT> <Info> <Console> <mocoes> <SOA_ALDS_HOM_Admin> <[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <a0016433> <> <> <1247689195901> <BEA-240002> <Struts module is configured to use com.bea.console.internal.ConsolePageFlowRequestProcessor as the request processor, but the <controller> element does not contain a <set-property> for "controllerClass". Page Flow actions in this module may not be handled correctly.>
####<Jul 15, 2009 5:19:55 PM BRT> <Info> <Console> <mocoes> <SOA_ALDS_HOM_Admin> <[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <a0016433> <> <> <1247689195901> <BEA-240001> <Attempting to instantiate SharedFlowControllers for request /console/ChangeManagerAction.do>
####<Jul 15, 2009 5:19:55 PM BRT> <Info> <Console> <mocoes> <SOA_ALDS_HOM_Admin> <[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <a0016433> <> <> <1247689195904> <BEA-240001> <Attempting to instantiate SharedFlowControllers for request /console/com/bea/console/actions/systemstatus/begin.do>
####<Jul 15, 2009 5:19:55 PM BRT> <Info> <Console> <mocoes> <SOA_ALDS_HOM_Admin> <[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <a0016433> <> <> <1247689195941> <BEA-240002> <Struts module is configured to use com.bea.console.internal.ConsolePageFlowRequestProcessor as the request processor, but the <controller> element does not contain a <set-property> for "controllerClass". Page Flow actions in this module may not be handled correctly.>
####<Jul 15, 2009 5:19:55 PM BRT> <Info> <Console> <mocoes> <SOA_ALDS_HOM_Admin> <[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <a0016433> <> <> <1247689195942> <BEA-240001> <Attempting to instantiate SharedFlowControllers for request /console/MessagesAction.do>
####<Jul 15, 2009 5:19:55 PM BRT> <Info> <Console> <mocoes> <SOA_ALDS_HOM_Admin> <[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <a0016433> <> <> <1247689195949> <BEA-240001> <Dynamically registering module /com/bea/console/actions/jdbc/datasources/createjdbcdatasource, config XML /_pageflow/struts-config-com-bea-console-actions-jdbc-datasources-createjdbcdatasource.xml>
####<Jul 15, 2009 5:19:55 PM BRT> <Info> <Console> <mocoes> <SOA_ALDS_HOM_Admin> <[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <a0016433> <> <> <1247689195949> <BEA-240001> <Dynamically registering module /com/bea/console/actions/jdbc/datasources/createjdbcdatasource, config XML /_pageflow/struts-config-com-bea-console-actions-jdbc-datasources-createjdbcdatasource.xml>
####<Jul 15, 2009 5:19:55 PM BRT> <Info> <Console> <mocoes> <SOA_ALDS_HOM_Admin> <[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <a0016433> <> <> <1247689195979> <BEA-240001> <Attempting to instantiate SharedFlowControllers for request /console/com/bea/console/actions/jdbc/datasources/createjdbcdatasource/begin.do>
####<Jul 15, 2009 5:19:55 PM BRT> <Info> <Console> <mocoes> <SOA_ALDS_HOM_Admin> <[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <a0016433> <> <> <1247689195982> <BEA-240001> <<ConsoleInteraction: User has launched the <CreateJDBCDataSource> assistant>>
####<Jul 15, 2009 5:19:56 PM BRT> <Info> <Console> <mocoes> <SOA_ALDS_HOM_Admin> <[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <a0016433> <> <> <1247689196064> <BEA-240001> <Attempting to instantiate SharedFlowControllers for request /console/com/bea/console/actions/jdbc/datasources/createjdbcdatasource/start.do>
####<Jul 15, 2009 5:20:27 PM BRT> <Info> <Console> <mocoes> <SOA_ALDS_HOM_Admin> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <a0016433> <> <> <1247689227188> <BEA-240001> <Attempting to instantiate SharedFlowControllers for request /console/com/bea/console/actions/jdbc/datasources/createjdbcdatasource/start.do>
####<Jul 15, 2009 5:20:27 PM BRT> <Info> <Console> <mocoes> <SOA_ALDS_HOM_Admin> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <a0016433> <> <> <1247689227239> <BEA-240002> <Struts module is configured to use com.bea.console.internal.ConsolePageFlowRequestProcessor as the request processor, but the <controller> element does not contain a <set-property> for "controllerClass". Page Flow actions in this module may not be handled correctly.>
####<Jul 15, 2009 5:20:27 PM BRT> <Info> <Console> <mocoes> <SOA_ALDS_HOM_Admin> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <a0016433> <> <> <1247689227239> <BEA-240001> <Attempting to instantiate SharedFlowControllers for request /console/ChangeManagerAction.do>
####<Jul 15, 2009 5:20:27 PM BRT> <Info> <Console> <mocoes> <SOA_ALDS_HOM_Admin> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <a0016433> <> <> <1247689227242> <BEA-240001> <Attempting to instantiate SharedFlowControllers for request /console/com/bea/console/actions/systemstatus/begin.do>
####<Jul 15, 2009 5:20:27 PM BRT> <Info> <Console> <mocoes> <SOA_ALDS_HOM_Admin> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <a0016433> <> <> <1247689227280> <BEA-240002> <Struts module is configured to use com.bea.console.internal.ConsolePageFlowRequestProcessor as the request processor, but the <controller> element does not contain a <set-property> for "controllerClass". Page Flow actions in this module may not be handled correctly.>
####<Jul 15, 2009 5:20:27 PM BRT> <Info> <Console> <mocoes> <SOA_ALDS_HOM_Admin> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <a0016433> <> <> <1247689227280> <BEA-240001> <Attempting to instantiate SharedFlowControllers for request /console/MessagesAction.do>
####<Jul 15, 2009 5:21:08 PM BRT> <Info> <Console> <mocoes> <SOA_ALDS_HOM_Admin> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <a0016433> <> <> <1247689268647> <BEA-240001> <Attempting to instantiate SharedFlowControllers for request /console/com/bea/console/actions/jdbc/datasources/createjdbcdatasource/selectTransactionOptions.do>
####<Jul 15, 2009 5:21:08 PM BRT> <Info> <Console> <mocoes> <SOA_ALDS_HOM_Admin> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <a0016433> <> <> <1247689268650> <BEA-240001> <<ConsoleInteraction: User has selected Next to "Select Transaction Options" page of <CreateJDBCDataSource> assistant>>
####<Jul 15, 2009 5:21:08 PM BRT> <Info> <Console> <mocoes> <SOA_ALDS_HOM_Admin> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <a0016433> <> <> <1247689268713> <BEA-240002> <Struts module is configured to use com.bea.console.internal.ConsolePageFlowRequestProcessor as the request processor, but the <controller> element does not contain a <set-property> for "controllerClass". Page Flow actions in this module may not be handled correctly.>
####<Jul 15, 2009 5:21:08 PM BRT> <Info> <Console> <mocoes> <SOA_ALDS_HOM_Admin> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <a0016433> <> <> <1247689268714> <BEA-240001> <Attempting to instantiate SharedFlowControllers for request /console/ChangeManagerAction.do>
####<Jul 15, 2009 5:21:08 PM BRT> <Info> <Console> <mocoes> <SOA_ALDS_HOM_Admin> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <a0016433> <> <> <1247689268716> <BEA-240001> <Attempting to instantiate SharedFlowControllers for request /console/com/bea/console/actions/systemstatus/begin.do>
####<Jul 15, 2009 5:21:08 PM BRT> <Info> <Console> <mocoes> <SOA_ALDS_HOM_Admin> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <a0016433> <> <> <1247689268754> <BEA-240002> <Struts module is configured to use com.bea.console.internal.ConsolePageFlowRequestProcessor as the request processor, but the <controller> element does not contain a <set-property> for "controllerClass". Page Flow actions in this module may not be handled correctly.>
####<Jul 15, 2009 5:21:08 PM BRT> <Info> <Console> <mocoes> <SOA_ALDS_HOM_Admin> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <a0016433> <> <> <1247689268754> <BEA-240001> <Attempting to instantiate SharedFlowControllers for request /console/MessagesAction.do>
####<Jul 15, 2009 5:21:39 PM BRT> <Info> <Console> <mocoes> <SOA_ALDS_HOM_Admin> <[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <a0016433> <> <> <1247689299657> <BEA-240001> <Attempting to instantiate SharedFlowControllers for request /console/com/bea/console/actions/jdbc/datasources/createjdbcdatasource/addConnectionProperties.do>
####<Jul 15, 2009 5:21:39 PM BRT> <Info> <Console> <mocoes> <SOA_ALDS_HOM_Admin> <[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <a0016433> <> <> <1247689299659> <BEA-240001> <<ConsoleInteraction: User has selected Next to "ConnectionProperties" page of <CreateJDBCDataSource> assistant>>
####<Jul 15, 2009 5:21:39 PM BRT> <Info> <Console> <mocoes> <SOA_ALDS_HOM_Admin> <[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <a0016433> <> <> <1247689299709> <BEA-240002> <Struts module is configured to use com.bea.console.internal.ConsolePageFlowRequestProcessor as the request processor, but the <controller> element does not contain a <set-property> for "controllerClass". Page Flow actions in this module may not be handled correctly.>
####<Jul 15, 2009 5:21:39 PM BRT> <Info> <Console> <mocoes> <SOA_ALDS_HOM_Admin> <[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <a0016433> <> <> <1247689299709> <BEA-240001> <Attempting to instantiate SharedFlowControllers for request /console/ChangeManagerAction.do>
####<Jul 15, 2009 5:21:39 PM BRT> <Info> <Console> <mocoes> <SOA_ALDS_HOM_Admin> <[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <a0016433> <> <> <1247689299712> <BEA-240001> <Attempting to instantiate SharedFlowControllers for request /console/com/bea/console/actions/systemstatus/begin.do>
####<Jul 15, 2009 5:21:39 PM BRT> <Info> <Console> <mocoes> <SOA_ALDS_HOM_Admin> <[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <a0016433> <> <> <1247689299750> <BEA-240002> <Struts module is configured to use com.bea.console.internal.ConsolePageFlowRequestProcessor as the request processor, but the <controller> element does not contain a <set-property> for "controllerClass". Page Flow actions in this module may not be handled correctly.>
####<Jul 15, 2009 5:21:39 PM BRT> <Info> <Console> <mocoes> <SOA_ALDS_HOM_Admin> <[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <a0016433> <> <> <1247689299750> <BEA-240001> <Attempting to instantiate SharedFlowControllers for request /console/MessagesAction.do>
####<Jul 15, 2009 5:24:42 PM BRT> <Info> <Console> <mocoes> <SOA_ALDS_HOM_Admin> <[ACTIVE] ExecuteThread: '9' for queue: 'weblogic.kernel.Default (self-tuning)'> <a0016433> <> <> <1247689482906> <BEA-240001> <Attempting to instantiate SharedFlowControllers for request /console/com/bea/console/actions/jdbc/datasources/createjdbcdatasource/testConnection.do>
####<Jul 15, 2009 5:24:42 PM BRT> <Info> <Console> <mocoes> <SOA_ALDS_HOM_Admin> <[ACTIVE] ExecuteThread: '9' for queue: 'weblogic.kernel.Default (self-tuning)'> <a0016433> <> <> <1247689482916> <BEA-240001> <<ConsoleInteraction: User has selected Next to "Test Database Connection" page of <CreateJDBCDataSource> assistant>>
####<Jul 15, 2009 5:24:42 PM BRT> <Info> <Console> <mocoes> <SOA_ALDS_HOM_Admin> <[ACTIVE] ExecuteThread: '9' for queue: 'weblogic.kernel.Default (self-tuning)'> <a0016433> <> <> <1247689482978> <BEA-240002> <Struts module is configured to use com.bea.console.internal.ConsolePageFlowRequestProcessor as the request processor, but the <controller> element does not contain a <set-property> for "controllerClass". Page Flow actions in this module may not be handled correctly.>
####<Jul 15, 2009 5:24:42 PM BRT> <Info> <Console> <mocoes> <SOA_ALDS_HOM_Admin> <[ACTIVE] ExecuteThread: '9' for queue: 'weblogic.kernel.Default (self-tuning)'> <a0016433> <> <> <1247689482978> <BEA-240001> <Attempting to instantiate SharedFlowControllers for request /console/ChangeManagerAction.do>
####<Jul 15, 2009 5:24:42 PM BRT> <Info> <Console> <mocoes> <SOA_ALDS_HOM_Admin> <[ACTIVE] ExecuteThread: '9' for queue: 'weblogic.kernel.Default (self-tuning)'> <a0016433> <> <> <1247689482981> <BEA-240001> <Attempting to instantiate SharedFlowControllers for request /console/com/bea/console/actions/systemstatus/begin.do>
####<Jul 15, 2009 5:24:43 PM BRT> <Info> <Console> <mocoes> <SOA_ALDS_HOM_Admin> <[ACTIVE] ExecuteThread: '9' for queue: 'weblogic.kernel.Default (self-tuning)'> <a0016433> <> <> <1247689483018> <BEA-240002> <Struts module is configured to use com.bea.console.internal.ConsolePageFlowRequestProcessor as the request processor, but the <controller> element does not contain a <set-property> for "controllerClass". Page Flow actions in this module may not be handled correctly.>
####<Jul 15, 2009 5:24:43 PM BRT> <Info> <Console> <mocoes> <SOA_ALDS_HOM_Admin> <[ACTIVE] ExecuteThread: '9' for queue: 'weblogic.kernel.Default (self-tuning)'> <a0016433> <> <> <1247689483018> <BEA-240001> <Attempting to instantiate SharedFlowControllers for request /console/MessagesAction.do>
####<Jul 15, 2009 5:26:24 PM BRT> <Info> <Console> <mocoes> <SOA_ALDS_HOM_Admin> <[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <a0016433> <> <> <1247689584639> <BEA-240001> <Attempting to instantiate SharedFlowControllers for request /console/com/bea/console/actions/jdbc/datasources/createjdbcdatasource/testConnectionConfiguration.do>
####<Jul 15, 2009 5:26:24 PM BRT> <Info> <Console> <mocoes> <SOA_ALDS_HOM_Admin> <[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <a0016433> <> <> <1247689584646> <BEA-240001> <<ConsoleInteraction: User has selected "Test Configuration" on "Test Database Connection" page of <CreateJDBCDataSource> assistant>>
####<Jul 15, 2009 5:26:24 PM BRT> <Error> <Console> <mocoes> <SOA_ALDS_HOM_Admin> <[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <a0016433> <> <> <1247689584951> <BEA-240003> <Console encountered the following error java.sql.SQLException: Io exception: Connection reset
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:146)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:255)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:387)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:441)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:165)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:35)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:801)
at com.bea.console.utils.jdbc.JDBCUtils.testConnection(JDBCUtils.java:504)
at com.bea.console.actions.jdbc.datasources.createjdbcdatasource.CreateJDBCDataSource.testConnectionConfiguration(CreateJDBCDataSource.java:369)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.apache.beehive.netui.pageflow.FlowController.invokeActionMethod(FlowController.java:869)
at org.apache.beehive.netui.pageflow.FlowController.getActionMethodForward(FlowController.java:808)
at org.apache.beehive.netui.pageflow.FlowController.internalExecute(FlowController.java:477)
at org.apache.beehive.netui.pageflow.PageFlowController.internalExecute(PageFlowController.java:305)
at org.apache.beehive.netui.pageflow.FlowController.execute(FlowController.java:335)
at org.apache.beehive.netui.pageflow.internal.FlowControllerAction.execute(FlowControllerAction.java:51)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:419)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.access$201(PageFlowRequestProcessor.java:95)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor$ActionRunner.execute(PageFlowRequestProcessor.java:2042)
at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors$WrapActionInterceptorChain.continueChain(ActionInterceptors.java:63)
at org.apache.beehive.netui.pageflow.interceptor.action.ActionInterceptor.wrapAction(ActionInterceptor.java:167)
at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors$WrapActionInterceptorChain.invoke(ActionInterceptors.java:49)
at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors$WrapActionInterceptorChain.continueChain(ActionInterceptors.java:57)
at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors.wrapAction(ActionInterceptors.java:86)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processActionPerform(PageFlowRequestProcessor.java:2114)
at com.bea.console.internal.ConsolePageFlowRequestProcessor.processActionPerform(ConsolePageFlowRequestProcessor.java:221)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:224)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processInternal(PageFlowRequestProcessor.java:554)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.process(PageFlowRequestProcessor.java:851)
at org.apache.beehive.netui.pageflow.AutoRegisterActionServlet.process(AutoRegisterActionServlet.java:630)
at org.apache.beehive.netui.pageflow.PageFlowActionServlet.process(PageFlowActionServlet.java:157)
at com.bea.console.internal.ConsoleActionServlet.process(ConsoleActionServlet.java:241)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
at com.bea.console.internal.ConsoleActionServlet.doGet(ConsoleActionServlet.java:130)
at org.apache.beehive.netui.pageflow.PageFlowUtils.strutsLookup(PageFlowUtils.java:1169)
at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.executeAction(ScopedContentCommonSupport.java:688)
at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.processActionInternal(ScopedContentCommonSupport.java:144)
at com.bea.portlet.adapter.scopedcontent.PageFlowStubImpl.processAction(PageFlowStubImpl.java:107)
at com.bea.portlet.adapter.NetuiActionHandler.raiseScopedAction(NetuiActionHandler.java:99)
at com.bea.netuix.servlets.controls.content.NetuiContent.raiseScopedAction(NetuiContent.java:180)
at com.bea.netuix.servlets.controls.content.NetuiContent.raiseScopedAction(NetuiContent.java:168)
at com.bea.netuix.servlets.controls.content.NetuiContent.handlePostbackData(NetuiContent.java:222)
at com.bea.netuix.nf.ControlLifecycle$2.visit(ControlLifecycle.java:178)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:351)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:361)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:361)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:361)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:361)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:361)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:361)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:361)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:361)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:361)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:361)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:361)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:361)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:361)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:361)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:361)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:361)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:361)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:361)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:361)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:361)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:361)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:361)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:361)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:361)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:361)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:361)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:361)
at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:128)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:339)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:330)
at com.bea.netuix.nf.Lifecycle.runInbound(Lifecycle.java:162)
at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:137)
at com.bea.netuix.servlets.manager.UIServlet.runLifecycle(UIServlet.java:370)
at com.bea.netuix.servlets.manager.UIServlet.doPost(UIServlet.java:229)
at com.bea.netuix.servlets.manager.UIServlet.service(UIServlet.java:183)
at com.bea.netuix.servlets.manager.SingleFileServlet.service(SingleFileServlet.java:237)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at weblogic.servlet.AsyncInitServlet.service(AsyncInitServlet.java:124)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3229)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2002)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1908)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1362)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
>
JDBC Driver is "oracle.jdbc.OracleDriver"
On other computer, I can connect to database when I use a "SQL Developer", but when I can't connect using Weblogic.
What' the problem?Hi,
It seems that while connecting to the database it's getting connection reset exception. have you tried connecting the database from where the machine you are trying to create datasource?
Also, send the steps which you are following for creating the datasource.
Regards,
Sankar -
Authorization Issue on creating New Data Source
Hi Experts,
We met several issues after we upgrade one of our BW system from 3.5 to BI 7.0.
We have a customized role for our BW developer which name is SYN:BC_USER_FOR_BWDEVELOPER. When we assign this role to the users, the users should have access to create new data source, create/change on ODS, infocube, infobjects,etc. The developers also need access transformation roles and BEX Web Templates.
After we upgrade our BW system from 3.5 to BI7.0. All the access has been denied. Then I tried to added many authorization objects in the developer role, then the developer role can access all the data source except transformation rules.
The following is the authorization objects which I have added:
S_RS_BCS
S_RS_BITM
S_RS_COMP
S_RS_COMP1
S_RS_CTT
S_RS_ERPT
S_RS_HIER
S_RS_ICBE
S_RS_IOBJ
S_RS_IOMAD
S_RS_ISET
S_RS_ISOUR
S_RS_ISRUM
S_RS_THJT
S_RS_TOOLS
S_RS_UOM.
S_RS_DS
S_RS_ISNEW
S_RS_DTP
S_RS_TR
S_RS_PC
S_RS_OHDST
S_RS_DAS
S_RS_BTMP.
I am not sure whether there are any other authorization objects or sth should be added to the developer role, could you give me some suggestions?
Thanks,When i execute create transformation rules with the account which already have bw_all role, the system shows you have no authorization.
The following is the error after i execute /nsu53:
Authorization check failed.
Authorization Obj. S_RS_TR Data Warehousing Workbench -Transformation
Object Class RS Business Information Warehouse
Activity 03
Source ZM_SUM
Target ZWHYTEST
Subtype of the Source
Subtype of the Target
Type of Source ODSO
Type of Target TRCS
-fran -
ERROR WHEN GENERATING EXPORT DATA SOURCE
Dear Members,
I am getting an error when generating export data source for Info Cube. I'm creating an Info Cube based on already existed info cube. Literally I am copying all the settings of an info cube to new Info Cube. The scenario is to load the data from one Info Cube to the other. The creation of Info Cube from an Info Cube is successful. But the problem is when I am generating export data source the following error is occurred.
Error: Data Source 81c_svrr does not exist in source system B3TCLNT800 of version A.
what could be the reason for the error?
Please let me know.
Thanks in advance.Dear Venkat,
The problem is because of error in the Myself Connection , Check the Myself connection in the source systems and the activate and restore the connection and try, it should work..
Thanks,
Krish -
Copa data source (urgent urgent)
HI friends
M newly jioned in BI. in reports some fields are showing blanks. i cheked in BI side every thing ok. i cheked the in the source system in RSA3 data for that data source(copa data source) ter also same fields are missing.this is COPA extraction. i think main problem is DATA SOURCE is it corrcte ?. i need to check some wer else.plz m in confuse plz advise me.
Regards
sivaHi
Usually, if the data is missing in COPA, then the next source will be veryfying SD data.
Say some of the condition types were created in SD module but those were not updated/mapped/configured in COPA, so obviously those values/fields will be missing in COPA and BI.
Hope this helps.
regards
S -
COPA data source RSA3, RD155
Hi,
when we run the RSA3 for COPA data source 1_CO_PA2901000_ACC we get error RD155 " No Source could be found to answer the search query".
Any ideas
UmangHi,
check out this link
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_bct/~form/handler
hope this helps
assign poins if helpful
Janardhan Kumar
Maybe you are looking for
-
BAPI or FM to post incoming payment for transaction F-28?
Hi all, I am looking for a BAPI or FM to post incoming payment through transaction F-28. Please guide if someone worked on it......... Thanks Suvarna
-
Checkboxes not displaying in webaccess of maximizer (program)
When I open the webaccess of the program maximizer in IE it works perfectly but when I use any version of Firefox newer than version 3.0 the checkboxes will not display. How can I make checkboxes available in Firefox 5. Is there a plugin? I'm running
-
Preview slideshow will not play pictures in order.
I'm looking a cd for work with jpgs. The slideshow won't show them in numerical order. Any thoughts? Thanks.
-
I recently ordered a Gateway computer in June and I got it yesterday. I can't update my sound card drivers because I don't know what my sound card is. I've looked in device manager and all it says is Creative SB?X-Fi. I need to know which one I have
-
Which Crystal Edition to use?
Post Author: marian_nextdoor CA Forum: Exporting Hi friends! Any assistance would be greatly appreciated. I'm not sure which version(s) of crystal I require. I developed the reports in crystal. I want the end user (other office peers) to be able to a