When creating events my calendar has the GMT default and I've done everything to fix it. I need help. It's driving me crazy.a

Time Zone issue in the calendar.

ChurchGurl,
I had the same problem on my newly acquired iPhone 6 as well as my slightly older iPad Mini (2), but the problem did not start until after I set up my iPhone 6 recently. The link (iOS: Troubleshooting issues with date and time - Apple Support) in Jason's response above is good advice and should fix the problem, but then your phone will not automatically adjust time zones if you go from one time zone to another. That may not be a problem much, or at all depending on how much you travel. Something else I noticed is that you are specifically referring to using the Calendar App. Be sure to check Settings > Mail, Contacts, Calendars > Time Zone Override (near the bottom under the "Calendars" section). If Time Zone Override is turned off, "events will display according to the time zone of your current location." I don't know for sure if the "location" it's talking about is determined by the "Time & Date" settings mentioned in Jason's response or some other calculation (GPS, Cell Signal, etc.). I'm thinking that if you turn off the feature to automatically set your time zone, it may affect your calendar as well.
Possible Alternative Solution...
My iPhone and iPad calenders sync with my Google Calendar, so this may be a whole different circumstance, although I encountered the same problem you're having where any appointments I created on my iPhone 6 (and suddenly on my iPad Mini as well, which created events properly before) listed the GMT Time Zone instead of my own. I checked the settings mentioned above, and checked the Calendar Time Zone settings directly in my Google account and all was correct... except for the iOS Time Zone issue displayed on the iOS Calendar. So, I created a new event in the iOS Calendar, and when I set the time for the event I made sure to change the Time Zone setting to my current/correct Time Zone, and then hit Done. After doing this a couple of times and changing/correcting the Time Zone each time I created the new appointment, it now uses the correct Time Zone for new events on both my iPhone 6 and on the iPad Mini as well, as if it synchronized the two back to the correct Calendar Time Zone settings. I suspect it had something to do with the fact that I set up a new iPhone on my account recently, but I don't know for sure. One question for you is whether you set up, restored, or added any new iOS devices to your account recently. It may or may not make a difference, but it's worth checking into. Good luck!

Similar Messages

  • HT1688 I downloaded the upgrade yesterday and now I don't get 3G service. Need help

    After downloading OS7 yesterday, I don't have 3G service. Need assistance.

    Go to Settings>Mobile>Enable 3G

  • My iPhone 4S won't turn on it's been off for two days now. I tried charging it but it makes a noise every 8 seconds,holding the buttons down and also plugging it to a computer. I need help on what to do or if anybody can tell me what's wrong with my phone

    My iPhone 4S won't turn on it's been off for two days now. I tried charging it but it makes a noise every 8 seconds,holding the buttons down and also plugging it to a computer. I need help on what to do or if anybody can tell me what's wrong with my phone

    Yes ive tried a different charger and it also nothing shows when i plug it in just makes a noise

  • Selecting an object fails when creating a new dashboard using the 'New Dashboard and Widget Wizard'

    Hi,
    I am using SCOM 2012 SP1
    I have recently been experiencing an issue when trying to create a new dashboard using the wizard. I get to the step where you select a group or object to add to the  Scope and Counters section. When I try to search for a particular object such as a
    port or interface it times out and returns an error. The error is shown below:
    Please provide the following information to the support engineer if you have to contact Microsoft Help and Support :
    Microsoft.EnterpriseManagement.Presentation.DataAccess.DataAccessDataNotFoundException: Exception reading objects ---> Microsoft.EnterpriseManagement.Common.UnknownDatabaseException: The query processor ran out of internal resources and could not
    produce a query plan. This is a rare event and only expected for extremely complex queries or queries that reference a very large number of tables or partitions. Please simplify the query. If you believe you have received this message in error, contact Customer
    Support Services for more information.
       at Microsoft.EnterpriseManagement.Common.Internal.ServiceProxy.HandleFault(String methodName, Message message)
       at Microsoft.EnterpriseManagement.Common.Internal.EntityObjectsServiceProxy.GetManagedEntitiesByManagedEntityTypesAndCriteriaWithInstanceQueryOptions(IList`1 managedEntityTypeIds, IList`1 managedEntityBaseTypeIds, IList`1 criterias, String
    languageCode, InstanceQueryOptions instanceQueryOptions)
       at Microsoft.EnterpriseManagement.InstancesManagement.GetObjectsReaderInternal[T](ICollection`1 criteriaCollection, ObjectQueryOptions queryOptions)
       at Microsoft.EnterpriseManagement.Management.DataProviders.ManagedEntityProvider.GetManagedEntitiesByClass(ICollection`1 baseTypeNames, String criteriaString, List`1 valueDefinitions, List`1 sortValueDefinitions, Int32 maxEntities, String typePropertyName,
    String typeWithIconPropertyName, Boolean propertyCollectionRequested)
       --- End of inner exception stack trace ---
       at Microsoft.EnterpriseManagement.Presentation.DataAccess.DataProviderCommandMethodInvoker.Invoke()
       at Microsoft.EnterpriseManagement.Monitoring.DataProviders.RetryCommandExecutionStrategy.Invoke(IDataProviderCommandMethodInvoker invoker)
       at Microsoft.EnterpriseManagement.Presentation.DataAccess.DataProviderCommandMethod.Invoke(CoreDataGateway gateWay, DataCommand command)
       at Microsoft.EnterpriseManagement.Presentation.DataAccess.CoreDataGateway.ExecuteInternal[TResult](DataCommand command)
       at Microsoft.EnterpriseManagement.Presentation.DataAccess.CoreDataGateway.<ExecuteAsync>b__0[TResult](<>f__AnonymousType0`1 data)
    It appears to be complaining about internal resources, but we have not experienced this issue before and both the management and SQL servers have plenty of resource. The databases are held on a seperate dedicated sql server and I have noticed that when I
    try to search for the object, the sqlservr.exe process immediately consumes 50% CPU while the query is running. As soon as it ends (errors) the sqlservr process drops back to a reasonable number.
    No changes have been made to either the management server or sql server. We were able to create dashboards one day, but then recieved this error the next.
    Has anyone else seen this issue? or can anyone explain what is happening?
    Many thanks

    Hi,
    Asposted earlier,hadt he same problem
    when creating a Dashboard widget type
    State.
    Ones olution I found for this was as follows:
    When creating the State widget,the option
    to specify the criterion I left blank
    and finished the creation of the dashboard.
    With that managed to solve the problem.Of course this
    is not the solution, or the root cause
    of the problem.
    I will examine more about this issue, and sohave
    the ultimate solution and why such behavior,I post
    here.
    thank you
    Wilsterman Fernandes

  • I have a iPod touch 4th Generation and its not wanting to start it stays on the apple logo and when i connect it to the computer it keeps beeping and the apple logo starts to flash but it wont start and i dont know how to fix this I need help!?

    I need help to be able to see if I can fix this or something.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Events in calendar have the wrong date and/or time

    I have a 2nd generation iPod Touch and I recently synced my iCal to it using iTunes. However when I looked at the actual events listed in the calendar, after it was synced, some of them had been moved to different dates at different times. Is there a way to fix this?

    Some where along the way, the settings are in the wrong time zone.  Either the iPod or the server (computer).
    My Ex-husband had the same complaint with our shared, online calendar on Yahoo.  Whatever I entered on the iPod, came up on a different day and 2 hours off.  He didn't have the computer mail account set up to eastern time zone.

  • HT201401 okey so i have an iphone4 and my camera isnt working at all i tried front and back screen  still black... it only works when im at my nessages.. but my frony dont. i have tried everything... please i need help.

    okey i have tried calling apple support no one will help me i stayed on the phone waiting an HOUR!! i tried turning my phone off and restarting it.. deleting pictures!! everything!!

    Sounds like your battery is not taking a charge, I know it shows full with you plug it in.  Try plugging it into a wall socket for a few hours and see if the iPod will work on battery power. 

  • If the LDAP "icsCalendar" value contains a space, an error will occur when creating events or tasks

    If a user's LDAP
    "icsCalendar" value
    contains a whitespace, the user will still be able to log in to the iPlanet
    Calendar Server(iCS). However, the user will receive a bad request
    error when creating events or tasks. The event or task is created,
    but the error will occur every time the user tries to save one.
    The "icsCalendar"
    preference cannot have a space in it. To avoid the above problem,
    the administrator must fix this value in LDAP.

    Hi Mahendra,
    check the following links:
    http://www.sapgenie.com/saptech/lsmw.htm
    http://www.scmexpertonline.com/downloads/SCM_LSMW_StepsOnWeb.doc
    May be u can find some help.
    Hope this helps you.
    Regards,
    Anuradha.B

  • How do I create a new calendar for the current year, using last years calendar's birthday's/photos and comments from the lower pages?

    Each year for the past 5 years I make a family calendar and send copies to all he family members around the globe.  I hate that I have to recreate all the birthdays and special occasions from scratch, and re-drag all the photos onto these dates, in the lower half of the page of each month on the new calendar.  How can I create a new calendar for the current year and port all of these photos/comments into the new calendar from last years calendar, to save having to redo all this work!!  I am not talking about the upper half page of the photos only...I am referring to the calendar page of each month.
    Thanks in advance. 
    Colin

    Welcome to the Apple Discussions. Open iWeb so you see your original site in the left hand pane. Use the File->New Site menu option to create a new site. Give it the name you want.
    Now select a page in your original site and type Command+D. That will duplicate the page. Drag the duplicate page down to the new site and rename it as needed. Do that for the other pages you need in the original site.
    OT

  • I'm not able to create a iphoto calendar with the correct birthday entries.

    Hello,
    I use the latest Iphoto version and OS X 10.9.
    I tried to create a calendar in iphoto that includes all birthday information of my family. Unfortunately I'm not able to do this.
    I tried two differnt ways to get the information into the calendar.
    First of all I' tried to use the option of the calendar to get the information of my contacts and it partly worked. Some dates were missing and I was not able to modify or add additional birthdays in the calendar. I checked my contacts and the information was there but not shown in the Iphoto Calendar.
    Therefore I have to get the information into the calendar in a different way. For that I created a new calendar in ICal and created for each Birthday entries.
    I select the option in the Iphoto calendar to show the new calendar in iPhoto. But the result was worse than with the first solution. Only few entries was shown in the calender.
    Do anybody have an idea how can I solve this issue.
    Thank you in advanced,
    Philipp

    First of all I' tried to use the option of the calendar to get the information of my contacts and it partly worked. Some dates were missing and I was not able to modify or add additional birthdays in the calendar. I checked my contacts and the information was there but not shown in the Iphoto Calendar.
    Do the birthdays (from Contacts) show correctly in the Calendar app? Sometimes there is a formatting problem with the date string in the Contacts. If the Birthdays do not show correctly in the Calendar.app, try to delete them from Contacs and enter them again, and check, if they now are showing correctly in Calendar. Quit both Contacts and Calendar.
    Then restart iPhoto, and in the "Settings" for your Photo Calendar disable the Birthdays option, and then turn it on again.
    Any changes you do to the birthdays in Contacts may only appear in iPhoto Calendars after Calendar or Contacts wrote their databases, and iPhoto will read these databases, when you enable the "Birthdays" option. Toggling this option on and off will ensure, that the new Contacs info will be read.
    -- Léonie

  • I have lost my calendar and now I cannot add events to it.  I keep getting cannot save event no calendar has been set.

    I have lost my calendar and now I cannot add events to it.  I keep getting message "cannot save event no calendar has been set."

    Maybe you need to Tap the Calendar Button in the upper left corner of the calendar app and select a calendar in which to add the event.
    Do you have. + sign in the lower right corner of the App? If not go to Settings>iCloud>Calendar>On. If you want to sync the calendar with iCloud, leave it set to on. If not, then set it to Off.
    Or try this of those suggestions don't work.
    Close all app scompletely and reboot the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • HT203175 My iPod touch is off and I can't turn it on because when I try, it has the iTunes logo and a usb pointing to it...and when I connect it to my computer and try to open it to iTunes, it says I have to restore it, but I don't want to lose all my pic

    My iPod touch is off and wont turn on because it has the itunes logo and a usb pointing to it, so when i looked it up online, it says i have to restore it but i don't want to because i don't want to lose all my pictures. What can I do?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • After updating my Iphone 4s to os 7.1.1 ota, my phone went into recovery mode. Yet when I try to restore it with Itunes on my windows 7 laptop it says the network connection has been reset! My phone has the itunes logo and charger symbol on it .

    After updating my Iphone 4s to os 7.1.1 from 7.1 over the air, my phone went into recovery mode. Yet when I try to restore it with Itunes on my windows 7 laptop it says the network connection has been reset. Make sure your network settings are correct and your network is active, or try again later. My phone has the itunes logo and charger symbol on it, as well as an arrow pointing at the Itunes logo. After holding the sleep button down or even doing the hard reset the same screen comes up on my phone regardless of whether it is plugged in or not to my computer. I have turned my computer off and on again. It is plugged in and charging as it's battery life is very short. I also reset my modem and the same error message pops up. The only option on my computer when my phone is plugged in is to restore it. My firewall also allows Itunes through it. I have literally tried everything I know being someone who knows very little about technology. I also do not want to hear about how the update worked for other people. My phone has been in recovery mode for 5 hours at least now so it will just make me more frustrated if a bunch of people post about how the update worked for them.

    Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...
    kevinpowell1 wrote:
    how can i get it out of recovery mode?
    Make sure you have the Current Version of iTunes Installed on your computer
    iTunes free download from www.itunes.com/download
    Then See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    Take your time... Pay particular attention to Steps 3 and 4.
    Some users have reported as many as 8 or 9 attempts were necessary before success.
    After you have Recovered your Device...
    Re-Sync your Content or Restore from the most recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766
    If the issue persists...
    Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
    Be sure to make an appointment first...

  • I plugged my iphone in to my laptop to update it and the computer shut down right at the end. My phone now has the itunes symbol and an arrow asking me to plug my phone into itunes (I assume the laptop). It's frozen like that even when switched off

    I plugged my iphone in to my laptop to update it and the computer shut down right at the end. My phone now has the itunes symbol and an arrow asking me to plug my phone into itunes (I assume the laptop). It's frozen like that even when switched off. If I plug the connection into the laptop it's not recognising it now. HELP!

    Hello there, xkatiex255.
    The following Knowledge Base article should provide the steps for you to resolve your issue:
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • I recently updated to iOS 8.0 on my Ipad however when i try to agree to the new terms and conditions i get an error message saying either 'Cannot connect to server' or 'Your session has timed out please try again' what can be done to resolve this?

    Hi, I recently updated to iOS 8.0 on my Ipad mini however when i try to agree to the new terms and conditions i get an error message saying either 'Cannot connect to server' or 'Your session has timed out please try again' what can be done to resolve this problem? Also i cannot download anything from the App store as a result of this.

    Can you check the Object Security for the Analysis Menu and Export button and see if it is restricted?
    Also, is this a Oracle DB?  IF so, has the following 32 bit Oracle Client components been isntalled:
    Oracle Objects for OLE
    Oracle Data Provider for .NET
    Oracle Providers for ASP.NET

Maybe you are looking for

  • IPhoto 08 with Mac OSX 10.5.8 will not connect when attempting to "buy" a book.

    The title pretty much explains my problem. I've created and purchased books from my iPhoto in the past with no problems but it's been a year or more since the last one. I created a book, did all the layout etc. and when I click "buy book" it has a po

  • How many instruction keys can we declare at the vendor bank details section?

    I understand that if the vendor is being shared across company codes, the instruction key will be available to the relevant companies. If company A's instruction key is different from company B's instruction key, how do we accomodate both companies'

  • Newbee to APEX4.1: "Install" issue

    OK, I'm a pinhead... But, if: a. I have sysdba privileges (because that's the way I installed Oracle Express 10g and Oracle Express 11g (two different computers) and b. If I run SQL Developer on either machine and c. Run apexins.sql within SQL Develo

  • Approval Report

    dear all, is there a universal table in which all the approvals are recorded (pending or approved). a quick response would be appreciated. thanks. regards, sidharth

  • Back up Photos

    I Cant seem to Get Help on Using Verizon Cloud? When I Installed on My Droid Razr I did get My Photo's & Music. Then I see it Kept Uploading Photo's Now I Have One Album with 4000 Photo's Thats When I Realized I have to Turn off BACK UP. Now I cant R