When currency changed from RMB, entry is lost in pricing condition of PO

Hi all,
I am facing a strange issue while creating a PO (SRM 5.0). When adding a new pricing condition for a line item, I try to change the currency from RMB to CNY. When this is done, the entire record is lost with all other values set to zero.
I tried using the function module CONVERT_TO_LOCAL_CURRENCY and this works fine.
What could be the possible reason as this happens only for this particular currency?
Where do I need to check further?
Edited by: gayu_march on Nov 10, 2010 11:28 AM
Edited by: gayu_march on Nov 10, 2010 11:29 AM

Hi
In the Access sequence maintain the Table sequence as exclusive for the Second access... This will ensure that if the Condition record is found it will adopt that.
Please check if your PO Qulaifies for the Second access or not.
Whether it is a third party Sales order & Check the Customer data & Country
Thanks & Regards
Kishore

Similar Messages

After doing a Foxfire update this morning, I now get a second icon on my tool bar when I change from news to gmail?

After accepting an update this morning from Mozilla, I now get a second icon on my bottom toolbar when I change from either news to gmail or from gmail to news. I tried restarting my computer but it still does it.

Thankyou mccashin:
I checked the home page assignment in preferences and found that the errant site had been appended to the normal (google) home page address. Incidentally, I had basically solve the problem within a session by erasing all history related to bbc. Without your fix I would been back to the same error next time I started Firefox from scratch. Thanks again.

I changed my Adobe user ID when we changed from Windows PC to Mac and now I am unable to read previously downloaded ebooks on my Sony Reader device due to Digital Rights Management. Can I resolve this?

I changed my Adobe user ID when we changed from Windows PC to Mac and now I am unable to read previously downloaded ebooks on my Sony Reader device due to Digital Rights Management. Any ideas how I can get access to these now?

Hi Blotontheland,
Thanks for the prompt reply. The interesting thing is that my Macbook Pro was upgraded today to Yosemite and I still have the spinning wheel on the start up screen before the login page comes up.

I cannot get subtitles on my new smart tv. I've read all the solutions online and none of them work. When I try to airplay the BBC i player by mirroring my iphone 4 the subtitles disappear when I change from iphone to appletv.

I cannot get subtitles on my new smart tv. I've read all the solutions online and none of them work. When I try to airplay the BBC i player by mirroring my iphone 4 the subtitles disappear when I change from iphone to apple tv.

That's because the BBC iPlayer app uses basic AirPlay to show the content, this means the original content is sent to the Apple TV for it to decode rather than mirroring the screen of the iPad where the subtitles are added.

We lost our Music Library when we changed from Vista to W7.

Recently had to change from Vista to W7 and when we downloaded a new iTunes, our Music Library wasn't there. What am I doing wrong?

Actually, it won't in my case.
On the external, I have them all saved in a folder called My Music (which contains some songs itself). There are hundreds of sub folders listed by Artist. Within those folders, are songs and also more folders with the Album title. Finally, within those album folders are the songs on that album.
I tried to load the entire My Music into iTunes, and it only loaded the songs in the My Music folder. I assume you have to go to every folder (down to the lowest level) and import them one by one.
I lose all of my playlists and ratings. They are still on my iPod - I wish there was a way to export those settings into a file, then repopulate iTunes - then use that file to re-organize my songs to the way they were.
I had weeks of work invested in iTunes and music organization.

Encore freezes when I change from DVD to blu ray

When I open Encore, or link from Premier pro CS4, and change from DVD to blu ray Encore freezes completely. Not even alt - ctrl - del works.
Everything works fine when making DVD's, the problem comes when trying to change to blu ray.
Has anyone seen this problem, - what can I do?

Welcome to the forum!
Please search the forum for "Roxio fix". Apply the pxengine patch and try again.
-Jeff

Time Quotas Updation when EE change from one grp to another group

Hi Experts,
Actually I have Two Quotas "A and B " in my Project will be updated based on EE Subgrp on monthly bases
when EE change EE subgrp in the mid of Month will new quota get generated or not ?
if Yes, how the process of Quota Updation please let me konw.
Thanks
Sreeni

Hi
Please make your Question more clear and Try to generate absence Quota through the Tcode pt_qta00 in Test mode and check the result.
Regards
Suresh.V

AF:Query Reset when mode changes from Advanced to Basic

Hi,
Can you please suggest how i can reset the af:query when i toggle from Advanced to Basic.
The Problem is : User goes to Advanced tab and selects "NOT IN" and searches for the data..
Now he switch backs to Basic Mode.. though it doesn't show the "Prefix "NOT IN" it still searches with the clause "NOT IN" . Basically user needs to reset and then start searching in "Basic" mode.
Please suggest.

Hi,
When i try to programmatically reset the table, it does reset it but the problem is after resetting if enter a search criteria and click on search again, nothing shows up.
If i do a search before clicking on reset, it works fine, but afer reset the search stops working??
Any idea why this could be happening?
Following is teh reset code which i am refereing
    if(QueryOperationEvent.Operation.RESET.equals(queryOperationEvent.getOperation())){
      AppModuleImpl am = this.getAm();
      ViewObject submittalVO = am.findViewObject("AcrSubmittallogView1");
       submittalVO.setNamedWhereClauseParam("bind_date", "");
       submittalVO.executeQuery();
       AdfFacesContext.getCurrentInstance().addPartialTarget(resId1);
    queryOperationEvent.getComponent().processUpdates(FacesContext.getCurrentInstance());
on the jspx page, have added the following code in af:query component
<af:query id="qryId1" headerText="Search" disclosed="true"
                              value="#{bindings.ImplicitViewCriteriaQuery.queryDescriptor}"
                              model="#{bindings.ImplicitViewCriteriaQuery.queryModel}"
                              queryListener="#{bindings.ImplicitViewCriteriaQuery.processQuery}"
                              *queryOperationListener="#{backingBeanScope.backing_SubmittalLog.resetListener}"*
                              binding="#{backingBeanScope.backing_SubmittalLog.q1}"
                              resultComponentId="::resId1"
                              saveQueryMode="hidden" />Thanks
ashvini

What Happens When You Change From Broadband to Fibre?

Today I'm due to move from Broadband to Fibre......I have no idea when but understand Sky allow for the whole day. However, following complete loss of service (despite the chocolate fireguard green status that Sky were reporting online) caused by cut wires in the network I'm wondering if my current complete loss of service is due to the changeover or just another example of a failure NOT being flagged up because Sky have no staff to actually fall it.
Can anyone please explain what they experienced when they moved from Sky Broadband to Sky Fibre?
Thanks in advance.

Its quite possible that your current downtime is down to the switch over as with Sky it can(and in most cases on here)take all day to activate(no idea why it takes so long with Sky when i moved to Plusnet i had only 15 minutes downtime).
The only way to know for sure is to get in contact with Sky directly and ask the question.

When I change from automatic to manual ethernet from 100baseTX to 1000baseT I lose internet connection

My iMac (21.5-inch, Late 2013) connection is automatically set at 100BaseTX. I changed to manual (from automatic) and selected 1000baseT setting in hardware settings. Lost internet connection when I did so. Is it possible to do this?

You can't magically change a slower connection into a faster one. That has to been done at the switch or the router.

Issue with PO Currency when currency changed after the approval.

Hi All,
we have get an issue with PO currency which is as follows
Step1:Created a Limit PO with value 3.701,00 CHF and sent it for approval,,and PO is approved and transfered to backed (We are using "Extended classical scenario' .
Step2:but we got to know that the PO value should be in USD ,so will go to PO and changed the currency value to USD ,it coveted value to 3421 but ,since i need the 3701 USD i changed the value to 3701 at item level and orderd the PO.
but after approval , when it transfered to backed it is showing the value 3.701,00 USD at header level ,but 3.402,84 USD at item level.
so when we are trying to create GR it is populating 3.402,84 USD but we need 3701 USD.
is any one know the what is the problem with this.
please help
Regards
cb

You can re-output a message that has already been outputted (printed or transmitted).
"Repeat message" function
You use this function if you wish to print out or transmit again a complete purchasing document that has already been outputted. Note that the system takes account in the message of any changes made to the purchasing document since it was last outputted - i.e. the system always outputs the current status of the document. If you wish to have old statuses available, you must optically archive the purchasing document.
Activities
You invoke the Messages screen as follows:
Via the purchasing document itself (Header Messages) or
Via <Purchasing document> Messages Print/transmit.
Enter the processing status 1 (successfully processed) and display the messages.
Select the desired message and choose Goto-> Message details.
Choose Edit-> Repeat message or Change message.
The system inserts the new message. If a change message is involved, the system sets the Change indicator.
Save your data.
Hope you find this useful.
Edited by: Reetesh on Dec 3, 2011 7:36 PM

I'm wondering were my favourites list went when I downloaded firefox ? Everything dissapeared when I changed from internet explorer

I had a list of sites that I regularly use for banking Gov't. agencies etc. etc. it was labeled my favourites whic I could add or delete at any time when I whent to my browser which happens to be google it apeared on the very left hand side of the screen. Since I have downloaded Firefox I cannot seem to find this list. Can anyone tell me where to look please?

You can usually find the imported IE Favorites in a folder ("From Internet Explorer") at the bottom of the Bookmarks Menu folder (Bookmarks > Organize Bookmarks).
If you can't find them in the "From Internet Explorer" folder then try this:
* Export the favorites in IE to an HTML file (bookmarks.html): File > Import and Export
* Import the HTML file in Firefox: Bookmarks > Organize Bookmarks > Import & Backup > Import HTML: From File
See also:
* http://kb.mozillazine.org/Import_bookmarks ("Import from another browser" and "Import from file")

Error when Saving FR Report from Studio when Making Changes from Client PC

We get the following error when trying to save a report when using FR Studio from a Client PC: *"Expecting a transferable end, but received -4352: 2067198, expected: -4113, <-4098>, 8074 -4098"*. We do not get this error if we so a Save As instead of a Save.
If we use FR Studio while remoted into the FR server, we do not get this error.
Any idea what may be the cause of this error message?
Thanks.
Terri

We had a similar issue on 11.1.2, which was never really resolved. Is this the version you are on?

Currency Change from Sales Order to Billing

Hi All,
We have a Requirment where we need to change the invoice to RUB while the Sales Order will be in USD.
I understand that in Stand. SAP the invoice currency should be same as Order Currency.
Can any one tell me that what custom logic needs to written for this or is there any specific Customizing settings for this.
Regards
Basha

Hi Basha,
Yes it is possible,
1. The scenario is like this I have a additional Data B tab in the header where we provided a text box with field label Invoice Currency. If you enter the currency system will generate the invoice with required currency.
2. Create a ZTABLE like ZINV_CURRENCY with fields Sales Org, Currency, New Currency.
In this case you should change your standard program of creating invoice and you should use make use of this ZTABLE. Also you should make sure of currency exchange etc.
I do not know how exactly we can impliment it but I have seen this scenario in one of client system.
Thanks & Regards,
Nagaraj Kalbavi

When I change from "remember History" to "use custom settings" it defaults back to remember history when I close the window. How do I keep my new setting?

I need 3rd party cookies enabled for a specific site. When I try to save custom settings, it defaults back to remember history and I can't open what I need on the site

Enabling thirds-party cookies is the default and if there aren't any other changes made then Firefox will show "Remember History"
Choosing the "Use custom settings for history" setting doesn't make any changes.<br />
If Firefox shows the "Use custom settings for history" setting then that is an indication that at least one of the history and cookie settings are not the default to make you aware that changes were If all History settings are default then you see "Firefox will: (Never) Remember History" and the custom settings are hidden.<br />

When currency changed from RMB, entry is lost in pricing condition of PO

Similar Messages

Maybe you are looking for