When customer and vender is same

HI Gurus ,
Please tell me how to link when customer & vender is same

First Create customer in XD01
then create Vendor in XK01.
Then Assign that vendor code in customer master --> General Data -->r Control Data .
Then assign that customer code in Vendor master.
your problem will be solved,.
Thanks,
Raja

Similar Messages

Customer and Vendor are same

Hi All,
We have a scenario where vendor is also a customer.
i have entered customer in vendor master and vice versa.
And also i have clearing with vendor in customer master and vice versa.
But i have posted an entry
Posting key 21-vendor
posting key 50-revenue
but i am unable to see the open item in FBL1N and FBL5N by selecting the customer items and vendor items respectively instead of normal items,
Did i miss anything?
Thanks!
Rajesh

hii
It is but obvious that it will not show in FBL5N as it is customer balances.
u have posted a vendor transaction so in FBL1N u will be able to see.
the logic is to clear the open item and present a summeried balance whether to take or pay..
but the proecedure is in both the master books say customer and vendor its appearing as a seperate entitiy with sepearate numbers.
so it has seperate balances too when taken as a customer and vendor. in this it will not show u balance in customer balance.
but when u try to clear the open items at that time it will reflect the total means what is to be pain and wht has to be collected &(-) get adjusted and u need to make payment or collect the balancing amount.
this is the logic for the configuration u made. so system is behaving in right manner.
please assign points if helpful.
sejal

Can we create the Mapping program,when source and target structures same?

Hi Friends,
if we have the same structure at source side and target side:
1) Is it necessary to create the mapping program?
2) If no need of mapping program what you will mention in the Interface Mapping?
3) In ID part which objects no need to create when both structures are same?
Regards,
Naidu.

Hi
>1) Is it necessary to create the mapping program?
No need to create mapping if both structure identical in all respects.
>2) If no need of mapping program what you will >mention in the Interface Mapping?
Dont define mapping and iterface mapping.
>3) In ID part which objects no need to create when >both structures are same?
You cannt assign a interface mapping as it is not defined in IR. leave that as interface mapping is not mandatory in Interface Determination Step.
Thanks
Gujjeti

Same customer and supplier

If the customer and supplier is same , Can we create a link between customer and supplier through customer master? If yes where is that field in the customer master?

Go to XD02 > General Data > Control Data > Vendor.
Field is KNA1-LIFNR.
Best Regards,
Ankur

BUG: With same name jpg and RAW in same folder

OK, we have established that you can't import same filenames RAW/jpg into the same folder, but you can drag them in later. This is useful for stacking.
Bugs that occur when jpg and RAW with same name together in same folder. (have not tested for psd, tif etc.
1. If you rename the jpg, the RAW also gets renamed
2. You cannot move the jpg properly within the folder in grid mode.
Most of my landscape shots need to go to photoshop. I developed a nice workflow which integrates PS quite well with LR...see post here:
http://www.adobeforums.com/cgi-bin/webx/.3bc34679/5
I created the workflow so that I could retain same name RAW/jpg stacks in the same folder. I have altered the workflow slightly so the jpg gets autorenamed with filename_# ... see the link above.
Kev

It's the same design issue Kevin. Sidecar files get renamed automatically and these are treated as sidecars.

How can I fix Firefox 18 and 19 from taking too long to close when custom settings for history is used?

Hello, please read entire post before answering, thanks!
I had Firefox(FF) 12.something and was happily using it when I had to get a new hard drive and start over, so I decided to upgrade to the latest FF of the moment, 18.something...
After going through setting up all the different add-ons etc.. and resetting the options/preferences (not cool how you all reset those every time it updates!) The time to open and close went from 2-4 seconds each to 78 seconds to open and 48 seconds to close. Over the last two days I tried (except reset) and read all the suggestions here to no avail.
So I read up on how to totally uninstall all traces of Firefox so I could do a clean install, that didn't work either: The freshly reinstalled FF 18.? program still opened and closed in the same times, and had all my info despite my deleting the folders/sub-folders said to hold that info. I turned everything off in FF, still no improvement, so again I tried to find accurate info on how to completely remove FF and still nothing that is correct for the current programs.
Today I looked again for info on how to totally remove FF, found something new to me, and tried that, including a complete search of the registry and removing everything with the firefox name, then reinstalled FF 18.?
Again all my bookmarks and info was there, and when I looked up help it auto-updated to 19.0 without my permission, again I don't like others making decisions for me for "my own good"(hence the screen name), not OK!
So I tried the reset feature in FF 19.0 and it did just that and the opening and closing lag times were gone, back to 2-4 seconds each,which seemed great!,but no.
When I went back to set up my options and restarted, FF went back to the lag, so I eventually removed/reset everything and all was well again, so I started putting/setting things back one at a time, that's when I found and verified the problem, the history settings!!!
I repeated this 6 times with the same results:
Set the History to Remember, and everything works fine, set the History to Custom the lag returns without fail.
My settings in Custom were:
Accept and remember everything until I close FF
Clear history when FF closes.
In the sub-menu "Settings" under the Clear History when FF closes:
All 6 boxes are checked for History and no boxes were checked for Data (all the defaults)
I looked at the processes running in Task manager when starting and stopping FF with these settings,I found that not only was FF.exe running but also a plugin-container.exe, both eventually stop after about 48 seconds, the plugin container does not appear to run when History is set to Remember all... (I have an incomplete memory about the plugin container causing problems like this in the past but I cant remember what or exactly when so...)
I also tried leaving the History setting to Remember All and the restarted and tried to clear everything through the Tools menu and FF stopped responding for about 60 seconds and then seemed fine afterward.
So I conclude that there is a problem in the newer versions with clearing History in the background while the browser continues to function, and the likely culprit is the plugin container(again?)...
So on to the questions...
Is it possible to set History to Custom and have FF 19.0 remain operational during that process and for FF to close in a few seconds as it did in FF 12.something with the same History settings?
If so how can I set that up?
If not, what is the latest version that will work correctly with the History being remembered until FF is closed and then wiped before re-opening, without waiting more than a few seconds for it all to happen as it was in my FF12.? version?
Also, How do I remove ALL TRACES of Firefox 18.? and up so that I can do a clean install if I need to, as I said everything that is here or linked to from here up to today, 2/21/2013, was not sufficient.
Thanks for your time...

So now on to question #2 of the original post...
"Also, How do I remove ALL TRACES of Firefox 18.? and up so that I can do a clean install if I need to, as I said everything that is here or linked to from here up to today, 2/21/2013, was not sufficient."
Why?
As it turns out, the plugin-container.exe rears its ugly head yet again. With as many as four instances trying to run at once, and locking FF completely whenever I try to watch videos online. (Google Chrome has no problems with the same videos on the same sites with the same software available to it on the same drive on the same machine, so it is definitely something in FF)
Also:
1. ) The auto update for; plug-ins, FF itself, add-ons, etc..., refuses to stay disabled.
I've read others saying that as many as five different areas need to be found and addressed in order to fully disable many of the "hidden" functions of the latest Firefox editions, yet I can't find a definite answer nor instructions to fully address this accusation nor can I find complete and full details/ instructions on how to completely uninstall all data connected to Firefox. I have followed what I can find so far and when I reinstall, all my personal data is there including bookmarks etc... so something isn't getting done...
2.) Whomever is in charge of "security"(Villalobos?) keeps disabling my plugins which is keeping me from using FF to some extent and may or may not be keeping the videos from playing while on-line and who knows what else, but as I have stated before I'm against anyone doing anything for any reason under the Hitler/Stalin-esque ideology that "the ends do justify the means", for example:
''Java Plugin 7 update 12 to 15 (click-to-play), Windows has been blocked for your protection." Why was it blocked?
Old versions of the Java plugin are potentially insecure and unstable. All users are strongly recommended to update on our plugin check page.
Who is affected? All users who have these versions of the plugin installed in Firefox.
What does this mean? The problematic add-on or plugin will be automatically disabled and no longer usable.
When Mozilla becomes aware of add-ons, plugins, or other third-party software that seriously compromises Firefox security, stability, or performance and meets certain criteria, the software may be blocked from general use. For more information, please read this support article.
Blocked on February 25, 2013. View block request.''
So as a last resort I'm going to downgrade to something that the socialist people who are now making decisions for the masses that use the newer editions of Firefox can't control (hopefully) and manipulate against my (our) will.
So I need your help cor-el to be able to remove ALL files/instructions/data in order to downgrade without anything "new" being left behind after uninstalling, presuming you know how to accomplish this and will share it with me and everyone else who wants to continue to use Firefox without someone else deciding what we can and can't do with it.(it is still open-source right?)
3.) I use my computer and browser for my business, I can't afford spending all this time and trouble trying to undo what Jorge Villalobos( and those who think as he does) continue to do, apparently believing that it's ok to cost me (us) time and money in the name of "protection", he really doesn't get it, and I'm done putting up with socialists (or control freaks pretending to be socialists) trying to run my computer. Take a friggin' Philosophy/Logic class and learn why the ends NEVER justify the means Jorge....
4.) This is as plain as it gets Jorge et al.: MY Computer, My Choice!...
5.) So what do you say cor-el, will you help me in this?

Excisable and Non Excisable plants for the same customer and same material

Hi All,
We have a customer who purchases the SAME goods from two different plants, one plant is Excisable and another plant is Non Excisable. So sales area of the customer is same for both the plants. When customer buys from Excisable plant Excise Duties should applicable and when the same customer buys from Non Excisable plant Excise Duties should not be applicable. If I maintain the Excise indicator as 1 in customer's J1ID then Excise Duties are applicable for the customer from wherever he buys the goods.(If he buys the goods from Excisable and Non Excisable plants Excise Duties are flowing).
So, my query is: if the customer buys from non-Excisable plant, Excise Duties should not flow.
So I am planning to create a new sales org for Non Excisable plant, then the sales area of the customer will change.
Is there any other way to over come this issue? Plz guide me.
Thanx&Regards,
RAMU

Dear Ramu
My suggestion is creating a new sales organization is not required just to fulfill this excise requirement.
Let us assume you have two plants
- 1000 is excisable and
- 2000 is non excisable
for material ABC
Now go to J1ID, select the tab "Material and Chapter ID combination" and maintain the excise tax indicator for plant 1000 only.
By doing so, while creating sale order, you input the delivering plant and based on the settings you maintained in J1ID, excise duty will be determined in that sale order.
thanks
G. Lakshmipathi

Enabl BGP between PE-CE when PE and CE are in same AS

We have BGP enable PE-CE setup in MPLS network. Customer A has branches with unique AS numbers.
We connected our PE routers via BGP with customer CE. Issue is Customer's Head Office AS number is equal to our AS number .
We are telecom provider having same AS for iBGP in our MPLS network.
Can you say how connect customer AS (Headoffice) with our PE router when PE and CE are in same AS

No, you cannot use it only at one side otherwise one side will try to do an iBGP peering while the other will try to do an eBGP peering. And anyway, IOS is smart enough to refuse the local-as command if the remote-as matches its local AS.

Enable BGP between PE-CE when PE and CE are in same AS

We have BGP enable PE-CE setup in MPLS network. Customer A has branches with unique AS numbers.
We connected our PE routers via BGP with customer CE. Issue is Customer's Head Office AS number is equal to our AS number .
We are telecom provider having same AS for iBGP in our MPLS network.
Can you say how connect customer AS (Headoffice) with our PE router when PE and CE are in same AS

AS Override?

I am using a work laptop and have the same problem. When I try to change the "configure proxy", they only available option is "use this proxy server for all protocols". Could it be that my system administrator blocked me from changing it since they don'

I am using a work laptop and have the same problem. When I try to change the "configure proxy", they only available option is "use this proxy server for all protocols". Could it be that my system administrator blocked me from changing it since they don't want us to use Firefox.
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; FNGP_SYS)

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the ''Safe mode'' start window.
You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

Same Business Partner as Customer and vendor

Hi All
I have a scenerio where same BP is both my customer and vendor . I make purchases and sales both with the same. I want to have single account for the BP ie All transactions should reflect in the same BP card. How can I achieve this thing in SAP B1.
Thanks

Hi Vijay,
This facility is not available in sap b1. You have maintain two different business partners seperately.
Venkatesan G.

Same customer and vendor number

Not sure if this is the correct forum to post this question, but I'll give it a try......
We are using BP and want to use same number for both customer and vendor. How can we achieve this?

The synchronisation is not available in ECC 500.
FS-BP has a synchronisation solution based on call transaction in batch-input. It should be part of the core.
But I don't know if there was a solution to synchronize the numbers without modification.
Anyway you can implement a BAdI in the customer master transaction to use your own numbers (CUSTOMER_ADD_DATA)
BUT make sure the customer/vendor number will be linked to the correct address
The saving process of the address is trigerred independantly (before or after the customer/vendor transaction is commited). As a result it is very easy to create orphaned address and loss of data accuracy for the vendor/customer.

We have developed a desktop application using Flash software and published the same for MAC environment. When we double click on the index.app file, the application is working perfectly in Mac 10.6.7 at our office. But if the same index.app file is double

We have developed a desktop application using Flash software and published the same for MAC environment. When we double click on the index.app file, the application is working perfectly in Mac 10.6.7 at our office. But if the same index.app file is double clicked in Mac 10.6.7 at out clients location, its not opening. For your information the client is able to open this same application by double clicking on index.swf file. The main problem is that client is not able to open the application using index.app file at their office whereas we are able to do so at our office. Can anyone give some suggestions to sort this problem?

The most common reason is different versions of Flash, or different versions of web browsers used. Some users may elect to not have Flash installed at all because of the processor overhead of Flash. If you are going to make an application for a client, check what operating system and browser versions they are using first. Then determine if a stand alone application is required, or if they have the necessary plugins to run specific browser enhanced code.
P.S. MAC is an acronym for Media Access Control. Mac is the shorthand for Macintosh, the operating system and computers made by Apple Inc.

MacBook pro doesnt start. When I start my lap top, it shows the apple and the line uploading but it only goes like to 1/3 and then it goes blank for some seconds, then it turns off by itself and turn on again and happen the same, apple logo, etc

MacBook Pro doesnt start. When I start my lap top, it shows the apple and the line uploading but it only goes like to 1/3 and then it goes blank for some seconds, then it turns off by itself and turn on again and happen the same, apple logo, line .. the noise like-fan going on, then turn off and turn on again. Tried starting holding option command P and R key and didnt work either. Starting to think I have lost all my data inside

Try a SMC reset.
http://support.apple.com/kb/ht3964
It might be helpful if you indicated the exact model/year of your MBP. Are you running Lion OSX?
Ciao.

When I try to open a download PDF I get message to install Adobe Reader. I do it and get the same message already installed. I close Safari and reopen but get same message to install Adobe

When I try to open a download PDF I get message to install Adobe Reader. I do it and get the same message already installed. I close Safari and reopen but get same message to install Adobe

You don't provide any details, but from the sound of it you are trying to open an online PDF in a browser that does not use the Adobe Reader plugin: http://helpx.adobe.com/acrobat/kb/pdf-browser-plugin-configuration.html

When customer and vender is same

Similar Messages

Maybe you are looking for