When cutting and pasting a list of vendors

Into any search  the order is changing?
Is there anyway of making it stick as per the original paste? Sounds stupid though causing problems for users using mail merge, thankee

After selection and while copying, right click and select 'copy text'.
then go to F.27, multiple selections, click on that last but one icon from right. (the one which is before X).
Then as usual, click on that execute button.
regards
S

Similar Messages

  • Why does cutting and pasting ordered lists no longer preserve the line numbers

    I often cut and paste ordered lists from web sites (track listings) to put with my downloaded tracks. Until the last update (not sure which version I was using with ubuntu 8.04 but it would have been the latest for that distro.) the line numbers were copied along with the ordered list, but they are not any more, so I have to type them all back in manually, which is a pain.
    I have uninstalled firefox 9 to try to downgrade, but don't know which version would still work.

    My daughter has had her Razr for about 9 months now.  About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

  • Mac running slow when cut and paste

    Hi,
    recently I noticed that my mac is running slow when I cut and paste (there is a delay of approx 1-2 secs). I thought it might be some kind of spyware which is trying to steal sensitive information such as passwords, credit cards and others. That would be surprising as I thought those were still rare in Mac. Any thought on this? Suggestions on how to protect my mac from these security issues? Thanks in advance!
    Mauro

    Morning smartasso,
    Thanks for using Apple Support Communities.
    If you find your Mac is running slowly, there are a number of potential causes that you can check.
    For more information on this, take a look at this article:
    OS X Mountain Lion: If your Mac runs slowly
    http://support.apple.com/kb/PH10798
    Best of luck,
    Mario

  • Text resizes when cutting and pasting

    Help? When I cut and paste text from one scene or area to
    another, the text changes sizes and does not look uniform to the
    next. How do I eliminate that or at least figure out how to make
    the text the same size (re: the original text may be 32, but the
    pasted text - at 32 - is much larger.)?

    The only time you should see a size difference is when you
    take text out of a movie clip that has been scaled. Hit Crtl-t to
    get the Transform window and see if the object is %100

  • How to avoid renders when cutting and pasting sequences to a new timeline?

    I am working on a 45 minute documentary in Final Cut Pro 7.0.3.
    The footage is 1080 24p and is being editing in a ProRes standard timeline (not the HQ version). I work on the documentary in chapters (separate sequences)...and then for rough cut outputs...cut and paste the chapters into a separate sequence timeline (also ProRes at the same frame rate).
    However, sometimes simple text titles, which didn't need rendering in the shorter chapter timeline, show up as redlines that need rendering in the longer timeline. Which I don't quite understand unless the process of copying and pasting severs the render links...but why should it do that?
    My timeline is toggled to SAFE RT in both chapter timelines and the overall project.
    Can anyone offer some advice on how I can get those chapters into a longer timeline without the redline bar showing up?
    Many thanks,
    John

    Hi John,
    Which I don't quite understand unless the process of copying and pasting severs the render links...but why should it do that?
    Well as you noted, the titles don't actually need rendering in your shorter sequence, hence there are no associated render files ie no link is being lost as there is nothing being linked to. Do you follow me? The issue is instead related to how many of these "realtime without rendering" titles that your system can track and handle, and that in turn is related to the amount of RAM in your system and how you have assigned that RAM allocation in FCP's *System Settings...* window > *Memory and Cache* tab. In the short sequence you have fewer titles and so FCP is managing them all in realtime, but in the longer master sequence it would seem apparent that the total number of titles exceeds that which your system can handle with all being in realtime, so the latter ones will require rendering.
    My timeline is toggled to SAFE RT in both chapter timelines and the overall project ... Can anyone offer some advice on how I can get those chapters into a longer timeline without the redline bar showing up?
    First, I'd ask if there is any specific reason you have set your sequences to Safe RT as opposed to the far more flexible Unlimited RT option?
    Second, as alluded to above, you should investigate your current Memory and Cache settings. If its at the 10% default, then try increasing your Still Cache a little (use trial and error, maybe 15% or 20% is enough) ... you should see that your system can handle more of text generator items without needing to render when you allocate more RAM to the task, but note that as you allocate more to RAM to your Still Cache then you are effectively decreasing the RAM available to the rest of FCP, eventually you will hit a tipping point so don't push the value too high.
    Hope it helps
    Andy

  • Premiere still very unstable when cutting and pasting transitions

    every beta release of Premiere becomes really unstable whenever I cut and paste transitions. Stock or 3rd party transitions, doesnt matter.... 4.0 - 4.1 beta, doesnt matter either...

    Yes, it's sweet when something works perfectly out of the box. It's usually nice when a couple of updages cure all ills. Unfortunately, there seems to yet be a "perfect world." Agree with Jim that until it's discovered, other methods must be employeed. A Feature Request/Bug Report would be the best way to deal with this for now.
    Good luck,
    Hunt

  • Changes font and size when cutting and pasting

    Cutting and pasting in a document made with a single font and size results in the moved word changing font and size. Checked all preferences, etc. and can't figure it out. Thanks, Jim

    Hello
    Look at:
    http://discussions.apple.com/thread.jspa?messageID=607239
    Yvan KOENIG (from FRANCE mardi 26 septembre 2006 20:03:27)

  • Result Code = -43 when cutting and pasting

    If anyone can help with this, I would be completely thankful.
    I cut a clip to paste it into a new project, so I could edit it by itself. Because of the way Garageband is designed, I had to close (and save) the first project before I could open a new one. When I went to paste the clip, I got a pop up box with the follow:
    "An error occurred.
    Result code = -43
    File = Male Voice#07.aif"
    I tried opening Audacity and pasting it in there, but there's not an option in any other program but Garageband. If I hit "OK" through the error, it pastes a completely blank clip of the same length, but silent.
    Is there any way to recover this clip, or has my Mac completely ruined my project on what should be a simple operation? I don't have time to rerecord this.
    Thanks!

    Oh my, I'm afraid you messed it up. Error code -43 means "file not found". Here's what I think happened:
    • You cut the region out of your original project. The Mac's clipboard now holds a GB region pointing to the audio file - not the audio file itself!
    • You close the original project, probably it prompts you whether you want to save it. If you click "yes", the project is saved, and since it doesn't contain the region you cut out, at this stage the audio file is deleted because it's not being used in the project (that's the way GB handles audio - otherwise the project size would grow indefinitely with all the unused audio takes).
    • Now you create a new project and paste in the region from the clipboard. But as I said, this region only has a reference to the audio file, it doesn't contain the audio itself - it can't find the deleted file, that's why you get the error message.
    If this is what happened, I'm afraid your audio is gone for good. Here's some tips how to avoid that in the future:
    • If the only purpose is editing one track, why transfer it to a new project at all? You can mute the other tracks and edit away.
    • To avoid deleting the original audio, always use the "copy" command, not "cut"!
    • If you successfully transferred an audio region to a new project, immediately use the "Save as Archive" command - that way the audio will be saved in the new project too. Otherwise it only references the old project which you might delete at some time, and then you'd be in the same position.
    Sorry, but I think the only option is to re-record!

  • Error message when cutting and pasting in a document

    Hi,
    When I attempt pasting something from one layer to another in an AI document I am receiving the following standard error message:
    You are attempting to paste or drag into one or more layers that are locked or hidden. Do you want to unlock and show all appropriate layers?
    Here's the problem--I don't have any layers locked or any layers hidden. I've tried adding new layers and pasting into those, but no go. This problem just started a few minutes ago--till then everything was fine. I've tried re starting AI and re starting my Mac. Nothing.
    Anyone have a fix?
    Thanks,

    Yes.
    I see now that I can paste into the layer I am copying from, but not into any other layer. If I lock my source layer, I can't paste at all.

  • RAR5.3 not able to cut and paste list of users to Multiple Selection screen

    CC V4.0 on ABAP system has a feature where you can cut and paste a list of many users from the clipboard to Single Values column in the Multiple Selection screen, so you can run SOD Analysis Report for all those users.  The Multiply Selection screen is a standard SAP supplied pop up screen.
    With RAR 5.3 the Multiply Selection screen design is different.  There is no longer feature to cut and paste from clipboard.  We have to input each user one at a time.  So if you have many users (20, 30, etc.) it is a time consuming task.  It is not acceptable to our business power users.
    We can import the list of users to a Custom User Group (in the Configuration Tab).  First of all, there is no mass delete on Custom User Group.  You have to delete each user one at a time which is time consuming.  The alternative is to create a new Custom User Group each time, then it becomes a maintenance nightmare.  Secondly, it is in the Configuration Tab which is only available to Administrators (fear of users changing configuation data), so the Administrator (or whomever has access to the Configuration Tab) has to maintain the Custom User Groups which is a lot of work for him or her or them.
    We talk to SAP every week.  But they are looking at this as a long time project.  Does any one of you (or your company) has the same requirements?  How do you get around it?  Did you setup some other procedures so users can cut and paste the users list and run the Risk Analysis report themselves?
    Thanks,
    John.

    This is probably a JVM issue. Are you using JInitiator or the IE native JVM?
    I suggest you turn on the JVM console, set the trace level to maximum, and then watch what happens when you attempt the copy.
    Also, check the key mapping (usually ctrl-k) that the forms applet is implementing. Perhaps ctrl-c means something else...

  • Cutting and pasting tables from one project to another

    When cutting and pasting existing tables from one project to
    another, the line weights for the cell borders seem to vary at
    random - some are the original line weight and some are heavier
    when pasted.
    I've tried sorting things out with the table properties
    dialogue, but to no effect.
    Is there a quick fix, or am I better importing in whole
    topics and then editing the imported topic?

    Hi Colum/Peter,
    It's not a custom table, I just need to copy an existing
    table from one project to another.
    My blasted developers (may the fleas of a thousand camels,
    etc), just decided to change the toolbars in one of our
    applications. As this toolbar appears in slightly different guises
    in about 6 tabs, I was trying to update the table that shows what
    icon does what and cut and paste that table into all the sub
    projects I have. Each table then only needs a minor edit for a few
    icons specific to that sub-project.
    Peter's on the right track. When I cut and pasted the table
    it also pasted in a number of lines of HTML associated with the
    styles in the other project. If I delete those lines, the table
    then appears as it should.
    Thanks for prompt response

  • If i cut and paste in email, while on firefox, as i try to paste, the rest of page goes into blue and if i go ahead and past, it erases rest of page that goes blue thx

    when cutting and pasting in yahoo email, as i push paste, the rest of the page goes into and is replaced by what i paste, instead of bein added to

    The ChromEdit Plus extension automatically creates a '''user.js''' ''(and the other 2 "user" files)'' upon installation, and it provides an interface within Firefox for editing those "user" files.
    http://webdesigns.ms11.net/chromeditp.html
    It makes it so you don't have to go hunting around for your Profile folder whenever you want to edit those "user" files by allowing you to access those files from within Firefox while it is running.
    FYI, this support article might be a little more helpful for doing the user.js file manually than what you cited as having read. <br />
    http://kb.mozillazine.org/User.js_file

  • How do I turn off "Smart Cut and paste" in InDesign?

    Hi,
    A programmer told me, that ID has a function called "smart cut and paste":
    smart cut and paste boolean -- If true, automatically adjusts spacing among words and between words and punctuation marks when cutting and pasting text.
    http://www.mugginsoft.com/html/kosmictask/ASDictionaryDocs/Adobe/InDesign/OS-X-10.7/InDesi gn-CS5/html/html/FULL/classes/text_editing_preference.html
    Unfortunately, it shows some weird text exchange behaviour when copying and pasting text.
    My web and my forum search showed no results.
    So: How can it be turned off?
    Thanks for your help!
    Mathais

    Thank you very much!
    In the German version of InDesign's GUI it is called "Beim Ausschneiden und Einfügen von Wörtern Abstand automatisch anpassen".

  • Vim: cutting and pasting between Terminal windows.

    Has anyone else noticed in vim, that when cutting and pasting between 2 files opened in 2 separate vim sessions, each in it's own terminal.app window. that you get a lot of indentions stuffed in with the paste content? If I open both files within a single vim session by splitting the window. This is not a problem.
    on other systems that I use, setting 'noai' resolves this problem. but it doesn't appear to have any effect on OS X. any suggetions?
    Thanks,
    Andy

    Hi Andy,
       Talking to yourself? Don't let this drive you insane. The difference is probably in your ~/.vimrc. In order to avoid the extra indention characters you must unset autoindent and also cindent. You may not set the cindent on the other platforms. I have it set because it's useful in composing code from scratch. However, if I want to paste indented text I have use both ":set noai" and ":set nocindent". After that pasting doesn't add any extra indention.
    Gary
    ~~~~
       Don't let people drive you crazy when you know it's in walking distance.

  • My Word  documents repeatedly crash when I cut and paste between documents or websites. Can you help?

    My Micrososft Word 2011 repeatedly freeze when I cut and paste between documents or with a website. Any advice?

    This is from the Microsoft Answers website,
    Try a Maggie:
    The Maggie:
    1. Create a new blank document in .docx format
    2. Carefully select all of the text in the bad document EXCEPT the last
    paragraph mark
    3. Copy it.
    4. Paste in the new document.
    5. Save under a new file name and close all, then re-open.
    This technique for de-corrupting is known as "Doing a 'Maggie'", after
    Margaret Secara from the TECHWR-L mailing list, who first publicised the
    technique.

Maybe you are looking for