When delete a PO confirmation a document with movement type 101 is created

Hello,
when we delete a PO confirmation, the system generates a document with the movement type 101 instead of 102. Do you know the reason?
Thank you.
Best regards.
Carlos Morrugares

Thanks for the valuable information.
br
muthu

Similar Messages

  • Backflush Components With Movement Type 101 When Confirm Production Order

    Hi PP Gurus,
    I found that we have a backflushing material (procurement type: F) in 'Good Movement' with movement type 101 instead of 261.
    The movement type of this material (procurement type: F) in reservation is 261. How did system determine the movement type 101 there?
    Is there any user exit used there?
    Appreciate any help. Thanks.
    Regards,
    Sun Qiang

    >
    Qiang Sun wrote:
    > Hi Arun,
    >
    > The control key has not been changed.
    >
    > In another production order, the error ocurred on another component which is the first line in 'Goods Movement'.
    >
    > Cheers,
    > Sun Qiang
    Hi,
    Pl check in component overview which operation has been assigned to pericular material in Operation tab.
    It should be 10.
    Arun

  • Find Material Document with Movement type 103 for material document 105

    Hi experts,
    In PO History, I have three line items with movement type 103 (Blocked Stock) and one with movement type 105 (From blocked stock to unrestricted stock). I would like to know the material document with movement type 105 document that has the movement type 103.
    Regards,
    Abdullah

    Hi,
      you can get the material documents (mblnr) for the movement type(bwart) in table AUFK.
    But i think you need to pass some other data along with bwart like matnr or aufnr for getting the correct mblnr.
    Regards,
    Chaitanya

  • Not able to create a material document with movement type 103

    I am not able to create a material document with movement type 103,
    The system is populating the value as 101 .
    How do I create a matdoc with movement type 103?

    What is the error you receive? Please specify with message number.
    On MIGO, you need to change the default value mvmt type value to 103 before you enter the PO number to be able to do 103.
    Once this defualt value is set, you can enter the PO and item number in the document number fields and proceed with 103.
    But you cannot change the mvmt type for already entered items from 101-103 or vice versa.
    I think the 101-103 and 103-101 mvmt type conversion message is standard error message

  • Inbound process with mov. type 101 in decentralized WM environment

    Hi Gurus,
    I am new to the decentrilezed WM environment and i would appreciate if someone could help me.
    My process has the following characteristics:
    1. Creation, in the ERP system, of the inbound delivery with reference to the PO. The delevery will be distributed.
    2. The inbound delivery is generated with item category widn, that is not relevant for putaway on the dWM
    3. In VL06I / VL32N post goods receipt. The stock should stay on 902 storage type.
    The problem is that, when the delivery is not relevant for putaway, the system cannot find the storage type to post the goods and the tables of the reference movement types are correctly configured. In a not distributed scenário, this should be an easy process...
    ERROR: T331 entry for warehouse number 800 and storage type  not found.
    If i check the relevancy for putaway this error never happens.
    Help please. Thank you in advance.
    Best regards.

    Hi,
    If the item category is marked as relevant for putaway, the process of distributing it to the decentralized system automatically sets the item to not relevant for putaway, since putaway takes place in the decentralized system.
    So please check the settings in your ERP as well as Decentralized system once again.
    Thanks,

  • Materail recevice with referance to material document with mvt type 303

    Hi Guru:
    In MB1B we are creating mateiral document with movement type 303 from one plant to other plant.
    Now same material we need to receive in other plant with movement type 305 in same T code Mb1B.
    Now as per user requirement if there is number of item are coming in material document which is generate with movement type 303, why we need to give all material, qty, batch again in MB1B movement type 305,
    while we are receving same material in plant.
    In MB1B there is link to create material document with referance to material document but we can use this facility for creating new material document for movement type 303 of same mateiral, qty and batch.
    Please suggest is there any way to use this 303 movement type material document with movement type 305.
    Thanks.
    Virendra
    09887603301

    Hi
    In my opinion in MB1B you can not have Material Doc. as a ref. Doc. for M.Type: 305...
    But for MIGO transaction you can have Material doc. as a ref. doc. for M.Type: 305
    Goto ---> OLME ---> Settings for Enjoy Transaction ---> Settings for Goods Movements -
    > Settings for Transactions and Referance Documents ---> There...for MIGO_TR...Transfer Posting ---> Referance Documents ---> For your M.Type: 305 assign Material Document as a Referance Documnt...
    Reward if useful
    Regards
    S.Baskaran

  • Problem in Material issue to WBS with movement type 261 Q

    Dear Experts,
                        I have sceario where i have to make delivery from project.But when i am issuing goods to WBS with movement type 261 Q its showing following errors.Can anyone put some light on it.
    Special stock 0001 Q  AS0111 000000000000000015 of this material does not exist
    Message no. M7076
    Diagnosis
    No special stock Q of the material (batch ) exists in storage location 0001 for AS0111 000000000000000015.
    Regards

    Hello,
    This is simple scenario. System is using 281 Q in CNS0. As you have procured through Q indicator WBS is mandatory in PO.
    So when you will take GRN , it will be consider as project stock if quality check is not there else will go in quality first. Check MBBS report for this.
    Now do CNS0 with reference to project number. So materials from project stock will get consumed when you will do PGI for CNS0 material document.
    Your scenario is failing in this stage becasue system didnt find stock against particular WBS element.
    Check this and revert.
    Keshav

  • Vendor Evaluation_On time delivry with Mov type 103

    Hi,
    We are in process of implementing Vendor Evaluation in our system.
    In th eprocess we came to know that for calculating score for sub
    criteria "On time delivery" system only considers the Goods Receipt
    posted with mov Type 101 and 105.
    We have a business scenario in which we first post 103 and ask user
    to do the Quality check of the material received.Once the user accept
    the material we accept the material by posting goods receipt through
    Mov Type 105.
    this acceptance time may differ case by case depending on the
    material.
    Now if we go by the standard system settings the Vendor's score will
    be affected if the users acceptance and hence the 105 posting is
    delayed.
    Kindly guide us how to overcome this issue.
    Rajesh

    Thanks...
       If possible can you please explain , how the enhancement MM06L001 will overwrite the score with an example.
    Rajesh

  • I'm getting a "printer error" message when I try to print a document with a lot of scans in it. Any suggestions?

    I'm getting a "printer error" message when I try to print a document with a lot of scans in it. Any suggestions?

    OK, I tried a few things, and I do not understand the results.
    1) I opened the document in Preview, and it would only recognize the three initial pages which I typed using the Pages App. It did not recognize the bulk of the text which I copied from Appleworks 6. It also did not recognize any of the scans.
    2) I tried opening a pdf in Preview, and it would only recognize the scans. (No Text!)
    3) I tried copying everything (select all, and command-c) in Pages, and then opened a blank Pages doc, and typed Command-v. This got me all of the text, but none of the scans!
    4) I was worried that my Pages app might be corrupted, but I successfully converted a similar 78-page document with copied materials from Appleworks 6 and similar scans, ant this worked perfectly.
    My conclusion is that my file must be corrupted. Is there any way to check this? shabda88

  • Error: A previous document of this type has been created with later date

    hi
    when i am adding invoice with a particular date.
    and if i am adding  another invoice for same customer with date previous to the first one i am getting this error
    pls tell the error were i have made and how to slove the error

    Om,
    Pleae check the following ...
    Marketing document with earlier posting date not added
    Symptom
    Error message: 'A previous document of this type has been created with a later date.' and the document is not added.
    Other terms
    AR, AP, invoice, credit memo, reserve invoice, wizard, document, generation, past, previous, posting date, settings, initialisation, SAP Business One
    Reason and Prerequisites
    Business requirement that marketing documents with an earlier date than the current system date are entered.
    Solution
    Under Administration -> System Initialisation -> Document Settings -> Tab 'General' is a tickbox 'Block Documents with Earlier Date'.
    If this box is ticked, the error message 'A previous document of this type has been created with a later date.' is received and the document cannot be added. This affects the following documents:
    AR and AP Invoice
    AR and AP Credit Memo
    AR and AP Reserve Invoice
    If the box is unticked, the system displays the message: 'A previous document of this type has been created with a later date. CONTINUE or CANCEL.' If 'Continue' is chosen, the document can be added.
    This setting will also affect documents to be processed by the 'Automatic Summary Wizard'.
    HTH,
    Eddy

  • FI document  amount of material documents of movement type 413

    Hi
    When I create a material document (413) transfer post from sales order stock to another sales order stock. SAP automatically generate a FI documents. So, my question is that the amount of FI document is how to be calculated?
    thanks
    Henry

    Hi,
    Please check below link which will provide solution for youe query. Thanking you.
    How to get print out for MIGO doc with movement type 701, 702 and 551, 552

  • MB1B with mov. type 311 - error message

    hai experts
    I have deleted AAA storage location (in spro) actually stock is available in that storage location. now again i have created AAA storage location (in spro), now i want to trf. that stock.. while doing MB1B with mov. type 311 at the time of saving i am getting error message like this: of the required qty. of material 12356789 (material code) 100.00 kgs remain (s) open.
    Pl. help me to come out of this problem
    Regards,
    sree

    Your deletion and recreation has nothing to do with this message, here am very certain.
    But to identify what the message caused, you have to give the full message along with its message number (double click message)
    It looks like you post your 311 in reference to a document (order, or reservation..). and the quantity that you move is smaller than the requested quantity.

  • Issue with Movement type

    Dear Experts,
    I am facing issue and in understanding with movement type 103,105 and 106.
    Purchase order has been created with 100 pcs
    1) Movement type 103 made for block stock.
    2) Movement type 105 to remove stock from block stock.
    3) Movement type 106 to reverse 105?
    When I try to check EKBE table it shows me different entry
    Purchase document EBELN compare with Reference document LFBNR
    Movement type 103     Reference document is same document number
    Movement type 105     Give reference document number as 103
    Movement type 106     Give reference document number as 103.
    Question - Why Movement type 106 show reference document number of 103.              
    Thanks
    AB

    hi,
    Please check the table MSEG. for 106, it will have reference for material document of 105
    field SMBLN instead of LFBNR
    With this field, you can go for the logic.
    select all docs from EKBE
    Moreover, you can use field MKPF-XBLNR for getting the delivery note field which will be same for cancelation docs. for ex 105 and 106 wil have this same value
    this field will make it easy for you to group the GR and their reversals for calculations.
    Regards
    Vivek Singh

  • Fixing automatic printing of material document for goods movement type 101

    Hi experts,
    I have a situation, where I want to fix automatically printing of material documents good receipt and transfer posting related to movement type :
    101- GR for plant XYZW to the printer AB12 with output type WE03 " GR note version 3" Language EN.
    311 - transfer posting plant XYZW to the printer AB12 with output type ZUGT language EN.
    Please provide pointers!!

    Hi Biju,
    Thanks a lot for the information. But I a facing a problem, I have maintained the Plant/Storage/Condition type in OMJ3 with printer also maintained in it.
    But, I am not able to generate output when I am doing MIGO for the Purchase order.
    I have to go MB02, maintain output type 'WE03' and printer-PL56 in the message tab of material document and then only i can see the spool is generated in SP01.
    My output condition type is maintained in MN21, with following parameters; Trans/Event type: WE,  Print Version: 3, Print Item: 6 for output type WE03.
    Moreover, Do I need to maintain the new printer in the printer settings.
    Please help me in getting the material document print output at MIGO only.

  • Material to Material transfer with movement type 321

    Dear Experts,
    Material to material transfer with movement type 309, the system create a price difference account if price control "S"
    but we transfer material to material with movement 321 (quality ), no price didderence account is generated, system showing different document
    Exp--- Material "A" with STD price 150
    Material "B" with STD price 100
    document is created
    Material A A/c. Credit 100
    Material B A/c. Dr. 150
    My question is, the price difference where is adjusting, is finance and costing books of account will effect.
    Kindly help to solve the issue
    Thanks & Regards,

    Dear Wasim,
    321 movement is to transfer the stock of a material lying in quality to unrestricted stock.
    It's not used for material to material transfer.
    Check and revert back.
    Regards
    Mangalraj.S

Maybe you are looking for

  • Installing Oracle 8i 8.1.5 on RedHat 5.1

    Hello, 1) All I should need to do to start the Installer is: a) Download JRE 1.1.6 v5 from blackdown b) Create a link to jre/bin/jre as /usr/local/jre c) Run the installer ./runInstaller 2) Nothing happens after doing the above, do I need to have jdk

  • What can I _really_ do with Flash.ocx in a Windows program

    (posted a few days ago in macromedia.players.flash with no answers; maybe this group is more applicable?) I've used Flash.ocx as an ActiveX control embedded in a Delphi program before. Works ok. What I'm wanting to learn about is how far I can push t

  • Problem with gcc

    I setup a Solaris 10 machine late last year and tested gcc 3.2.2 and it ran fine. I setup another machine witin the last week and when I run gcc I get the message gcc: invalid argument. Any ideas? Help would be appreciated.

  • 9i New feautures for devlopers

    Hello All, Does anyone have any idea where can i find the pdf/html for the 9i new features for developers. I would always come across it but being a DBA never downloaded it and now i have been asked by the development team. Cheers! Ali.

  • Question reg bind variable...

    hi, I have learnt that when we pass parameter to proc/func. those parameters are auto. treated as bind variables... but what if I have a simple proc. which does not accept any argumets nor it returns anything just a batch job type for e.g to send ema