When DHCP manual address is entered, I lose all connectivity

I've got the TiBook mentioned at the bottom of this post, and I am currently connected to a Netgear DG834G router over WiFi. It's set on DHCP, but I would like to have a static IP for port forwarding purposes. My current details are:
IP: 192.168.0.6
Subnet: 255.255.255.0
Router IP: 192.168.0.1
If I select DHCP with Manual Address, then enter the already aquired address in the IP field (i.e. 192.168.0.6) then press Apply, I lose all connectivity. Am I missing something?
Thanks people.

I think the Router thinks 192.168.0.6 is already taken, either make a New Location called All Off...
http://gnarlodious.com/Computer/MacOsx/WiFi
Or in Terminal type, assuming we're talking Ethernet one...
sudo ipconfig set en1 BOOTP
sudo ipconfig set en1 DHCP.
Then back to Network CP and make some small change so you can Apply again.
Or try a higher number.

Similar Messages

I have svg's in my adobe animate animation then import to muse via (oam) but when its published to the web I lose all my sag's. Why and how to fix?

I have svg's in my adobe animate animation then import to muse via (oam) but when its published to the web I lose all my sag's. Why and how to fix?

I have svg's in my adobe animate animation then import to muse via (oam) but when its published to the web I lose all my sag's. Why and how to fix?

I have a laptop with Windows 7, and when the machine is turned off it loses all the user names

I have a Gateway Laptop with Windows 7, 64 bit. When the machine is turned off, and then
back on it loses all it's user names that have been remembered.

Do you mean names and passwords in the Password Manager or do you mean that you are no longer logged on to (remembered by) websites after closing and restarting Firefox?
There is a difference between remembering the name and password in the Password Manager and a "remember me" check box on a web page to log you in automatically. 
The latter usually involves the creation of a special "remember me" cookie that is stored on your computer and that is send to the server. 
If that "remember me" cookie is removed or gets corrupted or is not send to the server then the server won't remember you anymore and you need to sign in once again.
In case you are using "Clear history when Firefox closes":
*do not clear the Cookies
*do not clear the Site Preferences
*do not clear the Saved Passwords
*Tools > Options > Privacy > Firefox will: "Use custom settings for history": [X] "Clear history when Firefox closes" > Settings
*https://support.mozilla.org/kb/Clear+Recent+History
Note that clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords.
Clearing cookies will remove all specified (selected) cookies including cookies with an allow exception.

Airport Extreme5th gen will lose all connection weekly

I purchased my 1st airport extreme in oct and I started having issues with the router losing all connection weekly. The only way to get it working again is to do a hard reset. I returned it and had it replaced at the local apple store and I am now having the exact same issue. I got my replacement unit and installed it at 8 pm last weds night and this evening it went out again so i know it must not be the modem but what can it be? I do have a gigabit netgear switch connected but that it. Thanks in advance for the help

Correct.. no files are lost in resets..
Plug the TC straight into the computer by ethernet.. use a LAN port of the TC. <-->
Factory reset.
The Factory Reset Gen1-4.
Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Factory reset Gen 5
Hold in reset for about 5sec until the status light flashes quickly.
If your AirPort Time Capsule still doesn’t respond, do a similar reset to the Gen1-4.
Unplug your AirPort Time Capsule .. hold in reset and power the TC back on.. without releasing the reset.. wait until status led flashes rapidly.
When it comes backup the TC will have an IP of 10.0.1.1 and the computer will be 10.0.1.2
You can access all your files on the TC.. with very minimal setup.. but Mavericks can be a right royal pain.
If the disk doesn't show up in Finder.. manually mount it.
Go, Connect to Server..
AFP://10.0.1.1 and when the computer finds the resource it will ask for a password.. type in public unless you changed it.
You should now be able to access the files.
I recommend if you have important stuff on the TC you do not want to lose.. get a USB (or faster) drive today.. plug it into the computer and make a backup.. the TC is not adequate as a NAS or file server as it has no ability to either backup itself or even have TM back it up.

Firefox will not load a web page , when the web address is entered absolutelt nothing happens. sometimes i get an error that says web address cannot be found .

hi Good people, please help.. i think i have deleted something that is stopping firefox from operating, when i enter a web address, i just get a blank page. the issue whatever it might be has also affected internet explorer. after a minute or so i get a message that says check the web address has been entered correctly. i'm running windows 7 on a sony vaio laptop, any suggestions would be most appreciated, thanks you in advance.

Boot the computer in Windows Safe Mode with network support (press F8 on the boot screen) as a test.
*http://www.bleepingcomputer.com/tutorials/how-to-start-windows-in-safe-mode/
Do a malware check with several malware scanning programs on the Windows computer.
Please scan with all programs because each program detects different malware.
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: http://windows.microsoft.com/en-us/windows/using-defender
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
*https://support.mozilla.org/kb/troubleshoot-firefox-issues-caused-malware

Is there a way to disable the pop-up window when a web address is entered?

I want to disable the pop-up window that shows all the web addresses that have previously been entered or at least edit thsites for ones I don't want to use

Set the Location Bar to "Nothing":
* Tools > Options > Privacy > Location Bar: When using the location bar, suggest: Nothing
* [[Smart Location Bar]]

Enter-PSSession does not work when a IPV6 address is entered as the -Computer value.

I cannot get Enter-PSSession to work with a specific IPV6 address and when TrustedHosts is also set to this address.
NOTE: If TrustedHosts is set to "*", then the command succeeds, so I'm pretty sure the target is configured correctly to allow remote access.
Example:
set-item wsman:\localhost\Client\TrustedHosts "fc00:10:114:247:2d0b:6bf8:c982:ce10"
ENTER-PSSession -Computer fc00:10:114:247:2d0b:6bf8:c982:ce10 -Credential <somecred>
ENTER-PSSession : Connecting to remote server [fc00:10:114:247:2d0b:6bf8:c982:ce10] failed with the following error message : The WinRM client cannot process the request. Default authentication may
be used with an IP address under the following conditions: the transport is HTTPS or the destination is in the TrustedHosts list, and explicit credentials are provided. Use winrm.cmd to configure
TrustedHosts. Note that computers in the TrustedHosts list might not be authenticated. For more information on how to set TrustedHosts run the following command: winrm help config. For more
information, see the about_Remote_Troubleshooting Help topic.
At line:1 char:1
+ ENTER-PSSession -Computer fc00:10:114:247:2d0b:6bf8:c982:ce10 -Credential Admini ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (fc00:10:114:247:2d0b:6bf8:c982:ce10:String) [Enter-PSSession], PSRemotingTransportException
+ FullyQualifiedErrorId : CreateRemoteRunspaceFailed

Ping works by IPv6 or name.
For name, I put the IPv6 address and name in my hosts file because during testing, I move from a domain to a workgroup occasionally.
Example:
Target
ipconfig
IPv6 Address. . . . . . . . . . . : fc00:10:114:247:44d1:f91f:2ceb:b032
Client Computer
/etc/hosts
fc00:10:114:247:44d1:f91f:2ceb:b032 slo-2k8r2-64-5
Ping slo-2k8r2-64-5
Reply from fc00:10:114:247:44d1:f91f:2ceb:b032: time<1ms
Powershell
set-item wsman:\localhost\Client\TrustedHosts "fc00:10:114:247:44d1:f91f:2ceb:b032"
ENTER-PSSession -Computer fc00:10:114:247:44d1:f91f:2ceb:b032
// ENTER-PSSession : Connecting to remote server [fc00:10:114:247:44d1:f91f:2ceb:b032] failed with the following error message : The WinRM client cannot process the request. Default authentication may
Again, if I set Trustedhosts to "*", then it works.
Example,
set-item wsman:\localhost\Client\TrustedHosts "*"
ENTER-PSSession -Computer fc00:10:114:247:44d1:f91f:2ceb:b032 -Credential name
> hostname
// Returns SLO-2K8R2-64-5
// IPConfig also returns fc00:10:114:247:44d1:f91f:2ceb:b032

My iPhone was connected to my old laptop but that laptop is broken now i want to connect it to a new laptop but when i do that do i also lose all the application data?

Hello,
just to explain quikly how my situation is I bought an IPhone and connected it to my regular computer, a few weeks after that i bought an macbook because my old computer was having problems with all kinds of things. recently my old computer "died" and now i cant add any music to my IPhone unless i connect it to my macbook but it's saying it will delete everything on the IPhone and use this library but does it also delete all the application data? for a quik example. Angry birds do you lose your progress on it?
thank you for helping, Blackhounter

If you are saying that you didn't back up your old computer ever, especially when you knew it was failing, then you are out of luck; you cannot restore a backup that doesn't exist. However, you can probably save some of your content from the iPhone as follows:
Connect your iPhone to your new computer, but do not sync
Authorize iTunes on the new computer to your iTunes account
Go to the iTunes File menu and choose "Transfer purchases"
Click on the phone's name in iTunes and then click on the Info tab on the right
Set up apps on your computer to sync contact, notes and calendar to
Make sure there is at least one of each in the apps you have selected
Sync
You will still lose any non-iTunes music and videos, and any photos in the photo album (but you will not lose the camera roll).

JAXP(saxon9B.jar) causing sqldeveloper to lose all connection information

Hope this helps someone...
While trying to implement Xpath 2 support from the Saxon9B.jar in netbeans, as part of the jaxp mechanism I placed the saxon9B.jar in the jre\lib\ext folder. Afterwards SQLDeveloper continuously emptied my connections.xml. Can't import backups, internal failure in oracles saxparser - wrong jar now in use. Can't create from scratch, nothing. Seems to look for saxon-dom.jar. I removed the Saxon9B.jar and all is once again good.
This is on Windows XP running SQLdeveloper 3.4 with Java 1.6.27

Finally I found the problem which takes me over a week to understand and its SILLY. I am posting here for all of us to never forget this atleast :-)
anyway the above problem as i mentioned earlier is that my newly added JAR files and existing were conflicting somehow.
I just had to add a class path of all of my new four JAR files to force my application to use these jar only not any other
which was missing and my application fails but test application works using ECLIPSE as i did not had anyother files in its 'lib' directory. I edit my script code from BEFORE to After and it all worked. (SILLY SILLY SILLY)
Before _
java -jar ../lib/MyApplication.jar $*
After_
java -cp ../ext/appserv-admin.jar:../ext/appserv-rt.jar:../ext/imqjmsra.jar:../ext/j2ee.jar:../lib/MyApplication.jar $*Hope this helps for people like me :-(
Thanks for your help. Best of luck
Regards

RV325 DHCP static address list and duplicates in unknown IP & MAC Binding List Table

DHCP Manual Bindings are entered and are displayed correctly in the IP & MAC Binding Table.
The error is that there are duplications of the IP address in the Unknown MAC Address List and hitting the Refresh button does nothing.
These duplicates remain in the Unknown table forever. Only a reboot of the router really refreshes the Unknown table.
Any suggestion?

The problem has been solved.
All the settings are apparently stored in the open directory database. I had to enable system records and viola there was the extra entry complete with MAC address and IP address.

Making a composite of 2 images, it lose all the colors

Hello, Thanks for reading me.
I'm trying to make a composite of 2 images (link_down, link_top) and when I'm making the composite it lose all the colors, I don't know why, please can anybody help me?
here are the images:
down= http://img234.imageshack.us/img234/9571/87453416io0.jpg
top= http://img71.imageshack.us/img71/7305/otraft7.png
output= http://img229.imageshack.us/img229/7796/outputjn0.jpg
and here is the code, please someone could help me?
import java.awt.Color;
import java.awt.Graphics2D;
import java.awt.event.WindowAdapter;
import java.awt.event.WindowEvent;
import java.awt.geom.AffineTransform;
import java.awt.image.BufferedImage;
import java.io.File;
import javax.imageio.ImageIO;
import javax.swing.JFrame;
public class ImageMaker {
 public static BufferedImage rotate(BufferedImage img, int angle) throws Exception{
 int w = img.getWidth();
 int h = img.getHeight();
 BufferedImage img2=ImageIO.read(new File("/tmp/top.png"));
 BufferedImage dimg = new BufferedImage(w, h, img.getType());
 Graphics2D g = dimg.createGraphics();
 g.drawImage(img, null, 0, 0);
 g.drawImage(img2,null, 20, 20);
 ImageIO.write(dimg, "jpg", new File("/tmp/output.jpg"));
 return dimg;
 public static BufferedImage createImage() {
 BufferedImage img = new BufferedImage(100, 100, BufferedImage.TYPE_INT_RGB);
 img.createGraphics();
 Graphics2D g = (Graphics2D)img.getGraphics();
 g.setColor(Color.YELLOW);
 g.fillRect(0, 0, 100, 100);
 for(int i = 1; i < 49; i++) {
 g.setColor(new Color(5*i, 5*i, 4+1*2+i*3));
 g.fillRect(2*i, 2*i, 3*i, 3*1);
 return img;
 public static void main(String[] args) {
 JFrame frame = new JFrame("Image Maker");
 frame.addWindowListener(new WindowAdapter() {
 public void windowClosing(WindowEvent event) {
 System.exit(0);
 try{
 BufferedImage a=ImageIO.read(new File("/tmp/down.jpg"));
 frame.setBounds(0, 0, 200, 200);
 //JImagePanel panel = new JImagePanel(createImage(), 50, 45);
 JImagePanel panel = new JImagePanel(rotate(a,30), 50, 45);
 frame.add(panel);
 frame.setVisible(true);
 }catch(Exception e)
 System.out.println("Salida:"+e.toString());
import java.awt.Graphics;
//import java.awt.Graphics2D;
import java.awt.image.BufferedImage;
import javax.swing.JPanel;
public class JImagePanel extends JPanel{
 private BufferedImage image;
 int x, y;
 public JImagePanel(BufferedImage image, int x, int y) {
 super();
 this.image = image;
 this.x = x;
 this.y = y;
 @Override
 protected void paintComponent(Graphics g) {
 super.paintComponent(g);
 g.drawImage(image, x, y, null);
}

Try replacing
BufferedImage dimg = new BufferedImage(w, h, img.getType());with
BufferedImage dimg = new BufferedImage(w, h, BufferedImage.TYPE_INT_RGB);Looks like your "down"-image is grayscale, and therefore also dimg.

I'm hooked up to the ethernet using DHCP with manual address. It's running (green) but my internet (Safari, messenger, email) doesn't work! Help!

I'm running an iMac with Mountain Lion. Not only do we do accounting work on this computer with AccountEdge, but the computer functions as a server to another computer in a different state.
Anyway, I set a static IP address (Using DHCP with manual address) on it (to allow for a VPN to the computer in the different state) and it is connected (green dot) - meaning that the other computer in the different state can connect to us via that ethernet line - but for some reason Safari, Messanger, and Apple Email won't work.
But if I switch a dynamic IP (DHCP auto), I can use the internet (Safari, messanger, email), but the computer in the different state can't connect to this computer.
How can I fix this so that the computer in the different state can connect to this computer and that the internet (Safari, messanger, and email) can work at the same time?
Much thanks!

No but if they are using a VPN Tunnel for the connection that restricts all internet traffic over the tunnel. Which means you can't use that same computer to broswe the internet or connect to other computers or devices on your LAN.
I'd need to see the actual setup, router and the IP addresses you are using.
Networking and remote networking is fairly easy when you are in front of the systems you are working on. Doing it over the internet on a forum is almost impossible. Tha is why I suggested you get local help, like the person that originally set it up.

DHCP with manual address doesn't work

My ISP has decided that they won't support static addresses for the
DHCP servers anymore. I'd really like to keep static IP addresses, so
I tried using the "DHCP with manual address." Unfortunately, it
doesn't recognize my Router which is serving DHCP. What's busted here?
Is it Tiger or is it my router (old mansesnse MIH-130).
Any help is appreciated.
thanks.

Comcast I believe is a cable connection.
Interesting, I found that if I continue to manually configure the
TCP/IP settings and just point the DNS to the router (192.168.1.1),
all works perfectly. This worked for 10.4.5, 9.2 and Yellowdog Linux as well.
When you say your isp is no longer using static ip addresses this only affecs your WAN ip. Setup your router to receieve internet via DHCP.
Your LAN ip addresss won't change. You can give all your macs static ip addresses if you like. It does not affect your WAN IP.

Network setup 'DHCP with manual address' changes to 'Using DHCP'

I have setup my local network with a manual address and have observed that the setting changes without my doing to simply Using DHCP. I can't get the setup to continue using a manually assigned ip address. Even though I've saved the network settings preferences, they revert to 'Using DHCP'. Any ideas? Thanks in advance.

If you "have setup (your) local network with a manual address," does that mean you have disabled DHCP in your router? If so, then you'd want to configure "manually" in your Sys Prefs > Network.
Or did you mean that you have setup a computer on your local network with a manual address using DHCP? (And that your router has DHCP enabled?)
If the router's DHCP is enabled, many routers will allow you to set aside a subset of IP addresses to the DHCP pool, and the remainder are, by definition, reserved for static addressing. Are you assigning the computer requiring a static IPA (but using DHCP defined gateway and subnet) an address falling within the static address range of your local subnet?
If you can't partition the address space between static IP addresses and DHCP-assigned IP addresses when DHCP is enabled, are you assigning a high-numbered IP address to the computer whose Sys Prefs has DHCP with manual address?

I am due to upgrade my iPhone 3 to iPhone 5. I have icloud which co-ordinates my phone and mac what happens when I get a new phone - I dont want to lose all my contacts, notes, addresses etc. Do I have to disconnect icloud and how? What happens?

I am due to upgrade my iphone 3 to iphone 5. I have icloud which is co-ordinating my iphone 3 and Mac Pro updating each other. What happens when I get a new phone - I dont want to lose all my addresses, notes etc. What is the procedure and step by step action? The new phone arrives - then what?

When I upgraded from the iPhone 3GS to iPhone 5, I simply did a Backup of my phone using iTunes, plugged in the new iPhone 5 into my Mac, and did a Restore of that backup to put everything back. This procedure is documented around the web. Also, the new phone will ask you for your Apple ID and when you enter it, all your iCloud info will be downloaded to the phone. It worked pretty well for me.

When DHCP manual address is entered, I lose all connectivity

Similar Messages

Maybe you are looking for