When did Draw Arc .vi Change Format?

In LabView 6.1, Draw Arc .vi had different wiring than in LabView 2010. I ran into a problem with a VI that I was using as a small subVi that is part of a much bigger Vi and now won't work because the Draw Arc.vi has incorrect wiring. The only difference I can see is that what is now a connection for "PEN" (cluster wire) was a connection for "black in B/W" (boolean wire). Basically I had a green circle that slowly turned to black as seconds ticked down. I have tried using the "PEN" control, entering "0" as pen color and line as "solid" but still does not work as before. Any help would be much appreciated. Thank You, Scott

swins,
hmm, sounds to me like it might not be the draw arc control. Are you sure that's the only one that could have broken in the upgrade? I dropped a simple little visual counter (just tied the arc size to the index of a for loop) into a sub vi as a test, and everything is working just fine for me. I'm interested to find out what's going on with your control that I can't replicate the issue. Maybe it's something specific with the color changing?
Cheers!
TJ G

Similar Messages

HT4759 When did the system requirments change? I logged on with windows xp until last week now it wont let me on???

As above
Thanks

Mikeandnicki wrote:
I have looked through everything but cannot find a way to delete or spend the 69 cents credit. Can anyone help me?
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

I just installed itunes 11.1.5.5. Now the format in Itunes is changed. when I am trying to add music to my iphone, there is no longer an add button under the Iphone device. Why did they have to change this? Can anyone help, Im tryiong to add music.

How do you add musci to the Iphone? I just installed itunes 11.1.5.5. Now the format in Itunes is changed. when I am trying to add music to my iphone, there is no longer an add button under the Iphone device. Why did they have to change this? Can anyone help, Im tryiong to add music.

Correct. When you purchase devices, they would have stated the OS they needed to work, on the box. This can be overlooked, but it is very important to check when purchasing.
You current OS, is so old, that they technology build into the new devices, is not something your OS understands. It didn't exist when your OS was created, and therefore you need to upgrade the OS to work with the newer technology of these devices.
10.6 software is not downloadable. You must purchase a DVD disc. You can order it from the on-line apple store
- http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard.

When saving a file in [.jpg] format, i am asked to choose a quality from 1 to 100. what changes in the file created based on the quality parameter chosen?

when saving a file in [.jpg] format, i am asked to choose a quality from 1 to 100. what changes in the file created based on the quality parameter chosen?. i would like to know what changes, so in the future i can set my camera to a setting that will give me the highest quality to begin with,allowing me to make crops and still preserve the quality.
thank you
dovid

It's the level of compression. Lower number, more aggressive compression, more visual artifacts.
Aside from that you should never use jpeg as a working format. The compression is destructive and cumulative, and the file deteriorates every time you resave it.
Use TIFF or PSD, and if you need jpeg save out a copy as a single final step.

How do you transfer files from mac to word pc for school? Paper keeps changing format when professor opens it on PC

I have Word 2011 on Mac 10.6.8. I write my papers and save them as .docx I submit them to my school online but every time My professor opens them he says the margins are set wrong. He said to save them as a Word-Pc format. How do I do this? Do I save it as RTF or as PDF? He has to be able to make comments on the paper after along the right side. I can not ask him to download anything t make it easier for me. I should be the one doing it correctly. I just do not know how. Can you please tell me how I should be saving my papers so that they do not change format when he opens them on his PC?
And I do recheck and open and repen my paper to check and recheck my margins before I submit it and all is fine on my end.
Thanks for your help.

nnigel, Welcome to the discussion area!
I've been reading thru the discussions and yet to find a clear answer on how to transfer files from my external HD to time capsule.
If it is directly connected to your Mac via USB or FireWire, Time Machine will include it in the backup.
...but is it difficult to point the library to the music file on the Time Capsule?
iTunes for Windows: Moving your iTunes Music folder

[SOLVED]When did minidlna commands change to minidlnad?

Now when I run
sudo minidlna -R
I get a
sudo: minidlna : Command not found
Using sudo minidlnad -R works. When did this change ? I did notice the upgrade of minidlna last week
Also minidlna would fail to start even when I did a
sudo systemctl start minidlna
I found that this was because the minidlna.service file was pointing to a different PIDFile in the Execstart and the PIDFile element
[Unit]
Description=minidlna server
After=network.target
[Service]
Type=forking
User=nobody
ExecStart=/usr/sbin/minidlnad -P /run/minidlna/minidlna.pid
PIDFile=/var/run/minidlna/minidlna.pid
[Install]
WantedBy=multi-user.target
Changing the PIDFile line to
PIDFile=/run/minidlna/minidlna.pid
allowed me to start up minidlna successfully. Can someone using minidlna confirm this before I open a bug report for it?

karol wrote:
Inxsible wrote:
karol wrote:https://projects.archlinux.org/svntogit … 14450e84c6 (at the very bottom)
I see. That does show why it stopped working. But how is it working for jrussell?
No idea. If jrussell shares more info, e.g.
type -p minidlna
pacman -Q minidlna
maybe we can figure this out.
Sure,
admin@russell-server ~ % type -p minidlna
minidlna not found
admin@russell-server ~ % type -p minidlnad
minidlnad is /usr/bin/minidlnad
admin@russell-server ~ % sudo pacman -Q minidlna
minidlna 1.1.0-2
admin@russell-server ~ % sudo systemctl status minidlna.service
minidlna.service - minidlna server
Loaded: loaded (/usr/lib/systemd/system/minidlna.service; enabled)
Active: active (running) since Thu 2013-05-23 15:32:02 SAST; 7h ago
Process: 263 ExecStart=/usr/bin/minidlnad -P /run/minidlna/minidlna.pid (code=exited, status=0/SUCCESS)
Last edited by jrussell (2013-05-23 21:13:18)

I backed up my iphone 4 and did an upgrade and changed my Apple ID and password but my phone has not recognised the new ID to upgrade my apps via the iphone.

I backed up my iphone 4 and did an upgrade and changed my Apple ID and password but my phone has not recognised the new ID to upgrade my apps via the iphone. How do I get rid of the old Apple ID when it comes to upgrading apps.
I have been into setting>store and signed out and signed back in and it still asks for old ID and password.

Everything you've had up to now has been tied to your old Apple ID. You cannot switch it over to a new Apple ID. You should contact iTunes support to help you with this:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support visit online support site.
For Mac App Store: Mac App Store Customer Service.
For iTunes: Apple Support for iTunes - Contact Us

IBase When Creating a Request for Change in Solution Manager 7.1

Hello all,
We recenlty upgraded our sandbox system to Solution Manager 7.1 SP3 and are currently investigating the new ChaRM functionality with the new CRM UI. Our company had configured ChaRM back in 2007 and has been working very well since the initial delivery.
While I was following the Request for [Change process simulation from RKT|https://websmp208.sap-ag.de/~sapidb/011000358700000478022011E/index.htm] on our sandbox system, I had noticed that the iBase and Component that we have created in transaction IB52 prior to the upgrade were not showing in our search when we were defining the Change Request Scope section. In the documentation that I have read leading up to the upgrade, there have been no mention of the iBase/Component data becoming invalid post-upgrade nor have I found a conversion process. I have done a search here on SDN and on SAP Notes to see why the iBase and Components were not showing up.
Has anybody encountered this issue since the upgrade to 7.1 or is there something I need to do in IB52 in order for the iBase/Component in the new CRM GUI?
Your assistance in this matter would be greatly appreciated.

Hi,
yes in 7.0 it worked for me too, that is because in 7.0 ChaRM searched for projects based on the IBase you selected.
If there were more than one project where this system is involved you got a pop up where to chose your project.
In 7.1 you chose the project directly, instead of let the system search for you.
And depending on what productive-systems are in this project you get your Ibase list.
If you don't select a project at all you will still get a list of all Ibases in your system.
Iif you ask the SAP, they will allways tell you that you have to have a productive system in your project, at least as you pointed out with a virtual system.
I did not read i t though and therfore ca nnot provide any sources.
This is all based on my experiences.
Best Regards
Daniel
Edited by: Daniel Titze on Nov 23, 2011 6:16 PM

New To Illustrator CS4 - How do you select the Arc Tool to Draw Arcs?

PDF on Illustrator doesn't indicate how to select the Arc tool. Extract from toe pdf follows:
Draw arcs
1 Select the Arc tool . (HELP -- I CAN'T LOCATE THE ARC TOOL).
2 Do one of the following:
• Position the pointer where you want the arc to begin, and drag to where you want the arc to end.
• Click where you want the arc to begin. In the dialog box, click a square on the reference point locator to determine the point from which the arc is drawn. Then set any of the following options, and click OK.
Length X-Axis
Specifies the width of the arc.
Length Y-Axis
Specifies the height of the arc.
Type
Specifies whether you want the object to be an open path or a closed path.
Base Along
Specifies the direction of the arc. Choose X Axis or Y Axis depending on whether you want to draw the base of the arc along the horizontal (x) axis or vertical (y) axis.
Slope
Specifies the direction of the arc’s slope. Enter a negative value for a concave (inward) slope. Enter a positive value for a convex (outward) slope. A slope of 0 creates a straight line.
Fill Arc
Fills the arc with the current fill color.
Note: To see a dynamic preview of the arc as you set options, double-click the arc tool in the Tools panel.

You're welcome.
Can i suggest that you explore al the tools there are drop down menus and on the panels as well in the upper right hand corner there is a drop down with useful functions and options. Also look at the control panel under the menu bar as you change tools to see the option each tool has and also some tools have further settings if you double click the icon in the tool bar other have option if you click in the document window once you have selected them.
But the best advice I can give you is to buy Mordy Goldings book Real World Illustrator CS 4 he also has one for the suites, it is a worthwhile investment.

Should the screen show when the ringer switch is changed?

My ringer is not working on my 4S with 7. Should the screen show when the mute switch is changed from on to off and back? I believe it did before.

But is not now. and my ringer is intermittent.

Change format to Calendar Prompt

Hi, i want to change the format to the calendar Prompt. The problem is that when i select a date the format used is d/m/yyyy and i need the yyyy-mm-dd format.
I change the function function NQCSetDate(d, m, y) in Calendar.js (located in OracleBI\oc4j_bi\j2ee\home\applications\analytics\analytics\res\b_mozilla) but it doesn t work.
My OBIEE is installled on a Unix machine and the version is 10.1.3.3.3
Thanks

http://108obiee.blogspot.com/search/label/DATE
Leave NQCSetDate as in the previous state (original), you don't need to edit it for this problem (can be edited for other purspose, for example to show 1-Jan-2000 instead of 1-1-2009).
If you want yyyy-mm-dd format in the calendar make changes in the localedefinitions.xml, it is well explained here: http://108obiee.blogspot.com/2009/03/how-to-change-date-format-mask-in-date.html.
dateShortFormat: yyyy-MM-dd (this is used when placing default value to calendar prompt but before picking value from calendar)
dateSeparator: - (this is used after selecting from calendar)
dateOrder: ymd (this is used after selecting from calendar)
If you want to show it with leading zeros (2009-01-01):
http://108obiee.blogspot.com/2009/05/how-to-add-leading-zeros-after.html.
Regards
Goran
http://108obiee.blogspot.com

E-mailed photo's change format

I use Safari w/ Comcast.net to do e-mail. I scanned a picture and "saved it as" in the .jpeg format to my desktop. I then went to e-mail and sent it to my brother in law who has a PC. When he tried to open the attachment in said it was a .DAT file and he could not open it. This same thing happened to two other people I sent the photo to. My question is how come it changes format and how do I stop it????

Good luck, I have been asking this question for a couple of weeks now. Safari changes my downloads to HTML. Nobody is good looking enough to give the answer. Maybe I will try another forum

When is Adobe going to change InDesign

Adobe needs to change InDesign CS5 so you can save back to CS3, CS2, CS just the same as Illustrator where you can do a "save as" wright back to Illustrator 3.

So do you want it to act like QuarkXPress or any other page layout program?
When Illustrator saves to a lesser format, it destroys or dumbs down the features in the more recent version. You won't see a gradient mesh in Illustrator 88 format. It is essentially an 'export', not a 'save'. InDesign can also export to a format that can be placed in older versions of InDesign.
There is an InDesign forum where this might be better addressed.

How has every SINGLE photo in one of my events been renamed - I did not use Batch change?

Yesterday I imported a photo, added it to an existing event. Then I changed the title of that ONE photo and closed down. Today when I opened that event EVERY SINGLE photo has that title. There are 72 photos which have all now got the same title. I did not use Batch change and am very very upset at the prospect of trying to re-title all these again.

Apple need to sort this out. I have spoken to Apple Genius at their store, to their technical support and other forums but no one seems to be able to help.
I have tried to view the images in my back up on Timemachine but THAT IS NOT POSSIBLE! Come on Apple what is the use of a Timemachine back-up which you cannot view if you accepted an iPhoto update recently!!!!
I looked in the photo library Data and found some of the titles attached to thumbnails and am laboriously copying and pasting these back in place of the multi-duplicated title.
I now live in fear of this happening across my entire iPhoto library - nightmare scenario.

Fetching the latest drawing No. after changing Sampling Drawing Procedure

Hi QM Masters,
I have 1 Report in that I fetch Drawing No. against Inspection Lot.
When I create a Inspection Lot at that time Drawing No. will generated in the system. Sampling Drawing procedure is assigned to the Lot. But the problem is that When I change the sampling procedure New Drawing No. is generated against the same lot.
Both Drawing No. are updated in QPRS table against the same lot. That's why It is difficult to fetch the latest Drawing no.
How I fetch the latest drawing no. after changing the SDP?
Gives me the Expert logic to fetch the data.

Hi can you check the fields ENTDATUM and ENTZEIT for sample drawing date and time or this date is different for you in the same table QPRS
Regrads,
Smruti
Edited by: smruti.ranjan on Feb 7, 2012 12:02 PM

When did Draw Arc .vi Change Format?

Similar Messages

Maybe you are looking for