When displaying just One WDiView in the Portal what is the best practice?

Hi,
I´m configuring some Roles to display WebDynpro iViews and I´m concerned because when a page has to display just one iView I don´t create the Page but instead I call the iView directly into the Role and the Displayed iView is viewed correctly, my concern began cause I´m checking SAP standard roles, WDiviews and WDPages and eventhough there is just one WDiView to be displayed a WDPage is been created to display it and the WD page id assigned to the Role.
Does anyone knows what is the best practice in this case?
Thanx in Advanced and Kind Regards,
Gerardo J

there is no harm in assigning iview directly to a role but usually assigning to a page ,page to a workset and workset to a role is followed universally

Similar Messages

  • How can i print just one page of photo book without printing the entire book

    how can i print just one page of photo book without printing the entire book

    Jim,
    Take heart.  We can help.
    First turn on page view so you can see how the content of your sheet fits on the page(s).  A Numbers document contains sheets (listed on the left) which in turn contain tables, charts, text, and graphics.  Select the sheet you want to print on the left, then enable page view by selecting the menu item:
    "View > Show Print View":
    Now you should see your content and how it fits on one, or more, pages.  If thie content is too big for one page use the controls and the bottom left of the window to expose the sheet controls:
    Here a table is too big to fit on one page:
    slide the "Content Scale" slider so the content fits:

  • I am concerned about the health of my current computer but have not yet made the commitment to a new one, but: 1) How can I transfer my iTunes account to a new computer when I get one... and 2) What can I do if my current computer suddenly implodes and I

    I am a bit of a computer/Internet/iTunes dummy....
    I am concerned about the health of my current computer but have not yet made the commitment to a new one, but:
    1) How can I transfer my iTunes account to a new computer when I get one...
    and
    2) What can I do if my current computer suddenly implodes and I have not yet 'copied/'saved'/otherwise protected my account, as is? -- I have already had my computer crash once and had one of your people help me restore all of the paid for songs (none of the uploaded from my own collection of CD songs, of course, so I had to spend a long time rebuilding that) -- and I believe I was told you could only help me recover that material one or two times altogether, no?
    WithOUT purchasing a Mach or iCloud (I actually think I have one of the later, but rarely have checked it) account, is there anything I can do to responsibly protect my account?
    Thanks for any time taken on this!!!

    These are two possible approaches that will normally work to move an existing library to a new computer.
    Method 1
    Backup the library with this User Tip.
    Deauthorize the old computer if you no longer want to access protected content on it.
    Restore the backup to your new computer using the same tool used to back it up.
    Keep your backup up-to-date in future.
    Method 2
    Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
    Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
    I'd recommend method 1 since it establishes an ongoing backup for your library.
    Note if you have iOS devices and haven't moved your contacts and calendar items across then you should create one dummy entry of each in your new profile and iTunes should  merge the existing data from the device.
    If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
    Should you be in the unfortunate position where you are no longer able to access your original library or a backup then then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data.
    tt2

  • HT5219 Do you need a Thunderbolt 2 Cable to get the speed out of a Thunderbolt 2 Port? Or is there just one kind of Thunderbolt cable, and its the Thunderbolt 2 port which determines the speed?

    Do you need  or is there a specific Thunderbolt 2 Cable to get the speed out of a Thunderbolt 2 Port? Or is there just one kind of Thunderbolt cable, and its the Thunderbolt 2 port which determines the speed?

    Hi XChip73,
    The links below will answer your questions about specific cable needs for Thunderbolt 2 and how the speed is determined.
    Apple - Thunderbolt: Next-generation high-speed I/O technology.
    Apple Thunderbolt cables and adapters - Apple Support
    Cheers,
    -Jason

  • I cannot copy whole text anymore. It will highlight just one paragraph, and if I go for the whole text, it goes blank. I have the 10.6.8 version.

    I cannot copy whole text anymore. It will highlight just one paragraph, and if I go for the whole text, it goes blank. I have the 10.6.8 version.

    Hello Banjo62
    Try testing that issue out within a new user on your Mac. If it does the same thing, then you will need to reinstall Mac OS X 10.6 Snow Leopard.
    Mac OS X: How to troubleshoot a software issue
    http://support.apple.com/kb/ht1199
    Mac OS X 10.6: Reinstalling Mac OS X
    http://support.apple.com/kb/PH6606
    Regards,
    -Norm G.

  • I just downloaded face time and I can hear the othe person just fine but they cannot hear me. But when I play music they can hear music. what is the problem and gow do i fix it?

    i just downloaded face time and I can hear the othe person just fine but they cannot hear me. But when I play music they can hear music. what is the problem and gow do i fix it?

    Test your microphone in the Sound preference pane.

  • My itunes wont auto sync my iphone 4 after i connect it to itunes. But it can auto sync when i connect it to my old laptop. what's the problem that it can't auto sync and when i did a backup in my new laptop, it was corrupted the next day.

    But it can auto sync when i connect it to my old laptop. what's the problem that it can't auto sync and when i did a backup in my new laptop, it was corrupted the next day and i was forced to use back a backup which i did in my old laptop 4 months ago. do i have to reinstall the itunes? will my backups be corrupted after i sync again? pls guide.
    P.S/ its the latest version of the itunes whenever i did the backups.

    iPod touches or any iDevices from Apple sync only to one computer. If you sync to a different computer, all your music will be replace with the music from the new computer's iTunes. If the music were purchased from iTunes, you can re-download them again otherwise the music on iPod touch will be deleted. Do you have iTunes backup? 

  • What are Parameters? How are they differenet from Variables? Why can't we use variables for passing data from one sequnece to another? What is the advantage of using Parameters instead of Variables?

    Hi All,
    I am new to TestStand. Still in the process of learning it.
    What are Parameters? How are they differenet from Variables? Why can't we use variables for passing data from one sequnece to another? What is the advantage of using Parameters instead of Variables?
    Thanks in advance,
    LaVIEWan
    Solved!
    Go to Solution.

    Hi,
    Using the Parameters is the correct method to pass data into and out of a sub sequence. You assign your data to be passed into or out of a Sequence when you are in the Edit Sequence Call dialog and in the Sequence Parameter list.
    Regards
    Ray Farmer

  • I have a Apple MacBook Pro "Core i7" 2.8 13" Late 2011. i want to upgrade its RAM from 4GB to 16GB. But OWC sells two kinds of RAM, the DDR3 and the DDR3L.What is the different and which one would work better for my mac. Thanks!!!

    Please help! I have a Apple MacBook Pro "Core i7" 2.8 13" Late 2011. i want to upgrade its RAM from 4GB to 16GB. But OWC sells two kinds of RAM, the DDR3 and the DDR3L.What is the different and which one would work better for my mac. Thanks!!!

    I don't see any DDR3L on the page for the RAM that would fit your model -> http://eshop.macsales.com/shop/memory/Apple_MacBook_MacBook_Pro/Upgrade/DDR3_133 3MHz_SDRAM.
    But the answer is that it doesn't really matter - just make certain to get 1333MHz.
    Good luck,
    Clinton
    MacBook Pro (15-inch Late 2011), OS X 10.??, 16GB Crucial RAM, Crucial M500 960GB SSD, 27” Apple Thunderbolt Display

  • Buring a DVD now and then another one a week later. What is the fastest

    Buring a DVD now and then another one a week later. What is the fastest way to burn the second copy? I thought maybe burn to image but that doesn't seem to make a DVD that plays when you put it into a DVD player. Is "Save as video_ts folder" the best way? When I go to do a regular burn it wants to encode everything each time unless I do all my copies right away. There is zero help in iDVD's help.

    You can copy a disc image to a physical DVD with Apple's Disk Utility, but I prefer Toast.
    Re Video_TS folders: This folder is the guts of a DVD, but the option is more advanced than I am. Toast can handle these folders, and lets you add DVD-ROM content subsequently (but you can add any files to the DVD-ROM area of a DVD from within iDVD). Toast is also able to compress large Video_TS folders to better fit on a DVD (so that could be useful). The Help function in Toast was the source for this info.
    John

  • I am not getting the Portal Content inside the System Landscape

    Hi,
    I am not getting the Portal Content inside the System Administrations-> System Configuration->System Landscape. This is not visible. I am SAP NetWeaver 7.0.
    What could be the possible reasons?
    Regards
    Kaushik Banerjee

    Kaushik,
    do you have the full tree in Contentadmin? do you have no entry in the systemadmin? or is it just empty in the lower nodes? this would be normal, you don't see the content in systemadmin, just the defined systems.
    kr, achim

  • When I move high quality clips into my timeline in Final Cut Express HD, they look and export low quality. I have tried converting the clips and de-interlacing them, but they always look the same, What is the problem? Thanks so much.

    When I move high quality clips into my timeline in Final Cut Express HD, they look and export low quality. I have tried converting the clips and de-interlacing them, but they always look the same, What is the problem? Thanks so much.

    You should check that the Project settings match the clip settings before editing them to the Timeline.
    Only newly created Projects will change not existing ones by adjusting the Project settings.
    If, for example, you have a Project set to NTSC DV you can only end up in trouble if the clips are PAL 1920 x 1080i.
    Al

  • I tried updating my iphone to a new verison but after the update the phone is not restarting, just the apple sign is showing up on the screen. what is the problem?

    i have tried updating my iphone to a newer version but after the update was completed the phone is not  restarting, just the apple logo is showing up on the screen. what is causing that problem?

    Re: i tried updating my iphone to a new verison but after the update the phone is not restarting, just the apple sign is showing up on the screen. what is the problem?
    I have tried the above fix and iTunes crashes giving error 27 after trying to load the iPhone firmware.
    I have booted my phone in DFU mode and this has made no difference.
    My mac is up to date.
    My iTunes is up to date.
    All i tried to do was update my ios as i have been unable to make calls or send text's all day.
    Do you have any other suggestions as my phone is no good to me now.
    Many thanks,
    Lyd_v

  • When migrating from Bo6.5 to Bo4.0 what are the issues we will face?

    Hi all,
    When migrating from Bo6.5 to Bo4.0 what are the issues may come?
    Thanks,
    Hari.

    Hi,
    first of all you cant direnctly migrate from BO 6.5 to BI4. You have to migrate prior from BO 6.5 to XI 3.1 and afterwards to BI4.
    This is a huge step cause BO 6.5 is a very legace version. You will face a lot of issues with the Security. You have to totally re- design it. You will also face issues with BCA Jobs. Also here you have to do a complete re- design. If you only use Full Client Reports you have to convert them to WebI in XI 3.1 prior to migrating them to BI4 cause with BI4 the support of DeskI has been stopped.
    Maybe you consider to consult the SAP Consulting devision. This kind of Migration will be challenging.
    Regards
    -Seb.

  • I need to transfer my In Design program from one computer to another. What is the procedure?

    I need to transfer my In Design program from one computer to another. What is the procedure?

    No need -problem solved with live chat through adobe.
    Sent from Samsung Mobile
    <div

Maybe you are looking for