When do I have to upgrade Firmware?
How often do I have to upgrade the firmware version of my wireless router?Message Edited by AP19 on 02-05-200706:22 PM
There are only two occasions when a firmware upgrade is required:
1) When there has been a security upgrade to the firmware
2) When you are having problems with the router, that cannot be otherwise solved.
Firmware is normally released with "version information". The version information is on the same web page as the firmware. This version information will tell you if there are security upgrades in the firmware.
Similar Messages
-
I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?
The sound seems very faint but can here static on playback.
-
error 1618 when I try to install 4.3.4 my phone is in DFC mode for 4 weeks.. I've tried other computers, reinstal itunes, tried to downgrade, upgrade firmware, tried iReb, tiny umbrella. What sould I do?
Hello Philly,
I believe that when you reset your ipod(command given from the computer, right?) touch WHILE the ipod was updating, It cleared the system in the middle of writing files, thus corrupting(equivalent of cutting of in the middle of a sentence) the basic running system.
I suggest you go to an apple store and ask for a technical diagonosis in person. they may offer to help if the problem is fixable. If your ipod is still under warrenty, i would guess it would be free/low cost.
~Remember, I am just giving an educated guess on limited information -
Hi there, I have MacBook Air (Mid 2012) with OSX 10.8.2. I want to update to latest OSX but it is saying that I need to first install MBA Flash Firmware Update 1.1. When I try to install this firmware, I am told I should have OSX 10.8.3, Each one asking other to update first, can some one help me in this regard ?
If you don't already have a current backup, back up all data, then reinstall the OS.* You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault boot volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main screen.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode.
*The linked support article refers to OS X 10.9 ("Mavericks"), but the procedure is the same for OS X 10.7 ("Lion") and later. -
I have just upgraded from CS 6 (Dreamweaver) and now when I click on a picture on a web page in Dreamweaver it doesn't go to the folder where the photo is stored anymore. If this continues I'll have to go back to CS 6 as I have to put in alot of photos.
I am using dw cc and I just double click picture I want to change in dreamweaver cc and my image folder opens, select new photo and then it updates and I am good to go, I am using a mac
-
I have just upgraded to Iphone 4S as my Iphone 3G failed. I want to transfer the data which I believe is stored in my Itunes account. But when I connect the phone to my computer nothing happens it just ask me if I want to download pictures or video. it does not go to my Itunes account.
swisscom say they cannot help it should go to your account and select the phone under devises but I canniot get a screen to do this can anyone help
ThanksTry restarting the AMDS > iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows
-
We have had Verizon Wireless service since 2007. We have 6 lines on our account. Unfortunately in 2012 when I (903.647.0073) upgraded from the iPhone4s to the iPhone 5 I started having reception problems. I started having dropped calls in my home. I had to go outside to get reception without dropped calls. I was told that because of metal in my home I would have to purchase a Network Extender for $250. And we HAVE not metal in our home. AND our other lines all work fine. I felt this was ridiculous. We already pay $350+/month for service and I should NOT have to purchase additional equipment for a service that I already pay for. The manager of our local store at the time gave us at no cost a Samsung Network Extender. It worked beautifully until about a month ago. I went to our local Verizon store and was told that I would have to purchase an extender. THIS is RIDICULOUS. We have been loyal customers for over 7 years and have been very satisfied with our service. Unless this issue can be resolved without purchasing an extender we will be switching our service as our lines come up for renewal. I regret this as we have been very happy with our service. But we should NOT have to purchase anything extra for one line that will not get good reception. Again, we pay $350+/ month for a service that does not work properly, simply RIDICULOUS! Currently the "sys" light flashes red (slow) and the GPS light remains red. Please help this very frustrated customer.
Regardless with what carrier your with you might have the same issue, My recommendation would be to get a router that will help you with viewing live traffic and keep a tally of your usage and any device connected to your internet connection. You can go with the peplink balance 20 and be able to look at your traffic by the hour, daily, weekly, monthly or yearly. Look for trends, see what computers or devices are doing what I attached a screen shot so you can see an example of mine. You can purchase the router at 3gstore
http://i45.tinypic.com/6zc674.jpg -
I have just upgraded to the iphone 5 and now when I send a text message it says its from astrogirl36@*** instead of my name, that is my name for icloud how do I change this
<Email Edited By Host>You are only as young as you feel......
This is an example of how you can select the exact content that you want to sync to your device. You do not have to sync the entire iTunes library. You can pick and choose the music, apps, books and so on that you want to sync. This is using music as an example.
Connect the iPad to the PC and launch iTunes.
Click on the iPad name on the left side under devices.
Click on the Music Tab on the right.
Click on only the albums or playlists that you want to sync.
Click on the Sync Music Heading.
Click on Apply in the lower right corner of iTunes
You can do this with apps, books, movies .... Whatever .... You have the freedom to sync whatever you want. -
I have just upgraded from Elements/Premiere elements 11 to version 12. I am running on a PC with Windows 7. When I try to run video from the existing catalogue or video newly imported I get a window stating "....system does not have the required compressor/decompressor (codec) installed" Where has it gone? Where do I get a new one? I am getting REALLY REALLY fed up with trying to find an answer!!!!!!!!
Try to disable hardware acceleration in Firefox.
*Firefox > Preferences > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
I have just upgraded to iOS7 and when I open my apps some have data saved and some (Eden, Survivalcraft) do not. My son is distraught that all his hard work has gone so does anyone know why this would be and how do I fix it please?
Nevermind. Problem solved. They were there. I just couldn't see them.
-
I may have totally screwed myself but...after installing Yosemite without checking for potential problems with Adobe software, my CS4 Design Premium suite wouldn't open. So after consulting some forums, I deinstalled it, but I only have disks for my old CS3. When I got the CS4 upgrade I downloaded it, back in 2011... What can I do?? Everything was fine before I upgraded that *#$%* Yosemite.
You can find the CS4 download here: https://helpx.adobe.com/creative-suite/kb/cs4-product-downloads.html
Benjamin -
Hi, I have recently upgraded from and Iphone 4 to 5. I completed a back up on my iphone 4 via icloud which went ok. When setting up my new phone I selected to set up as a new phone and not via icloud back up. Is there anyway I can restore my details to my new phone? Thanks Hayley
Welcome to the Apple Community.
Navigate to Settings > General > Software Update and install any updates available.
Navigate to Settings > General > Reset > Erase all contents and settings on the device you want to restore.
When this completes and the Set-Up Assistant starts, choose "Restore from iCloud Backup" and enter your iCloud account and password. You will see the three most recent backups for each of the devices on which you enabled Backup. Choose which backup to restore from. -
I upgraded itunes since a pop up stated that I would have to upgrade it so it can recognize my iphone5's new software. I upgraded the itunes and now when I plug in the iphone its asking "set up as new iphone" will this delete everything on my phone? Also why is it forcing me to set up as a new iphone, why doesn't it recognize it like it did before I upgraded iTunes. I'm afaid I will lose all my apps, music, pictures etc. please help. thank you.
You are correct. Corrupted files are in the backup. If you've already restored the iPhone it has been erased and starting over is the way to go in order to eliminate the corrupted files.
Hope that helps -
I have Adobe Photoshop CS4 and have just upgraded my Mac operating system to Yosemite with the newest version of Java 2014 running. When I try to access Photoshop from Bridge or directly open it asks for a Legacy Version of Java 6. As I am a pensioner I cannot afford an upgrade does anyone know of a work-around for this problem?
Hi Daddyfred,
CS4 Photoshop has not been tested on Yosemite. But still you can try the Java 6 update using the below link.
http://www.oracle.com/technetwork/java/javase/downloads/java-archive-downloads-javase6-419 409.html
Thank you for posting on Adobe Forums. -
i have recently upgraded my my iphone 3gs to ios 5.0.1 and now my computer doesnt recognise it as a camera. is there any way i can access my photos stored on my phone from my computer? i also dont have wifi so i cant use the icloud option.
Hi Amy,
I have exactly the same problem. Before the update to 5.0.1 whenever I connected my 3GS to my MacBook Image Capture used to open. Now nothing happens. When I opened Image Capture or iPhoto, either program recognized my device as the iPhone, but no pictures showed up on the screen.
I emailed the photo's from the iPhone to myself and that worked OK.
Have no idea why the computer doesn't recognize the iPhone as a camera anymore.
You haven't had any answers on your question, so no solution yet.
Hope someone can help us.
Maybe you are looking for
-
BBP_PGRP_ASSIGN_BAdI:Purchase Grp & Purchase Org. are not getting changed
Hi Experts , Actual Process: As per the normal process when Purchase requisiton is created in ECC then it will get reflected to SRM through BBP_EXTREQ_TRANSFER.So while SRM creating that it will assign some deflaut purchase group and organisation .
-
Any Help would be Appreciated !
-
Double-clicking an album no longer begins playback
Prior to this release of iTunes, double-clicking an album cover in album view would initiate playback of the entire album, queuing the all songs in "Up Next." This seems to be broken in 12.1, and clicking the "Play" symbol when the album is expanded
-
How to create a relationship diagram by using Visio 2010
Dear Please can you tell me that how to How to create a relationship diagram by using Visio 2010? It should be include: one-to-one relationship diagram one-to-many relationship diagram many-to-many relationship diagram many thanks D.lui
-
Update to iTunes 10.6.3 in order to update iPhone to iOS6
How can I update my iTunes to 10.6.3 from 10.5.2? The Genius Bar will not fix my iPhone 4 unless my software is updated (to iOS6), and iTunes will not update my iPhone software unless iTunes is updated. I cannot update to iTunes 10.7 b/c I am running