When do i need to create SID adm user?

Hi All,
I am new to XI.I am trying to install XI on windows 2003 and sqlserver. I am done with the following without any error?
1. OS and its service packs
2. Sql Server and patches.
3.Central instance
4. DB instance
5. Installed sap gui.
I have logged in as administrator and installed the above stuff.
1. When do i need to create <SID>adm user?
2. Do i need to use <SID>adm to install the XI?
3. When i logged in to sapgui, i am getting host name error. Do i need to change hosts file?
Thank you
Ganges Leaves
Message was edited by: Ganges Leaves

Hi Ganges,
Pls have a look into this SAP Material
https://websmp209.sap-ag.de/~sapidb/011000358700009389172004E.PDF
http://help.sap.com/bp_bpmv130/Documentation/Installation/XI30InstallGuide.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a5550de0-0701-0010-a8b4-9fd433a080f3
<i>4. When i logged in to sapgui, i am getting host name error. Do i need to change hosts file?</i>
>>> Just ping the IP address and check that are u able to connect. Also check with Browser .
Hope this helps,
Regards,
Moorthy

Similar Messages

When do i need to create table spaces ?

hi all,
i know that any database has one table space and one data file at first creation , but
when do i need to create another table space or data file ? do i need that when oracle tells me that there is no space anymore or what ?
thanks

newbi_egy wrote:
hi all,
i know that any database has one table space and one data file at first creation , but
when do i need to create another table space or data file ? do i need that when oracle tells me that there is no space anymore or what ? In oracle database, the concept of storage segregation is done by two ways, using the schema and using the tablespace. So assume that you have two applications . One is used for HR related work and another is used for Finance and both kind of data is stored in one single database only. So how would you maintain such requirement? There are two ways to do it. One, you make two different schemas for each of the application and call them, for example HR schema and Fin schema. Now, you can create objects related to each of the application in it's own schema and store it in may be a single tablespace, Users. But this is going to be a little problematic like what would happen if you have lost the data file of that tablespace? You would be losing the data related to both the applications. So the better option would be to use two different tablespaces and store the data related to each application in both of them.
Understand that tablespace is a logical structure only. The only thing that's physical is going to be those data files which are stored under the tablespace. So if you are just running out of space in a data file of a tablespace, you do not need to create another tablespace. Take it like this that if you are running out of space for your family in the house, you can either make a new house for them or you can even build a new floor for them. Which one would be easier to manage, the new floor since a lot of ground work is already done for you. And that's what is the case if you have run out of the space in the data file. For this,you can simply create a new datafile(building a new floor) or even extend the existing one(construct a new room in the same floor, if you have space) . But creating a new tablespace won't be something that you should be doing for the reason of space being exhausted IMO.
Aman....

How to add system to login using sid adm user in HANA Studio

Hi,
I have added SYSTEM user for my TEST system in HANA Studio. Now, I would like to add TEST system but using <sid>adm user.
It shows "The system cannot be reached. The logon data could not be used. Do you want to add the system anyway?".
May I know how to add TEST system using <sid>adm user?
Thank you.
regards,
zl

You need Database user, not operating system user <sid>adm user.

HT4796 do i need to create a new user each time i do a migration ?

do i need to create a new user each time i do a migration ?

If the computer you are migrating to already has a user the Migration will create a new one.
If not Setup Assistant should be used instead (see Pondini's Guide)

When a new site is created can a user name and password be generated for it automatically?

I have a work request from a manager that is asking, when a new site is created (via workflow), that a generic user name and password be created just for that site?
If it is possible I would like for it to be created at the same time as the site be being created or do I need to wait until after the site is created and then trigger a workflow to create the generic user account?
this account is only needed to do one thing.. upload documents to a folder.
of course there can be multiple sites being built at one time and would like for this to be auto generated.... and possible be in a hidden list so I can include the info in a workflow email letting the receiver of the email know that
they need to use this specific user name and password just for this site.

Hi SPSAdminTC,
According to your description, my understanding is that you want to create sites and grant users permissions on the sites via workflow in SharePoint 2013.
Users are stored in AD, before you grant site permissions to them, the name and password have existed in AD users and groups. So, you need to add the users into AD before you grant permissions to them.
In SharePoint 2013 Designer, you can use REST API to create site and assign permissions to users. You can use Send Email action to send email to users and customize the body of the email.
More information, please take a look at:
http://rogereriksen.wordpress.com/2013/05/24/create-a-sharepoint-site-using-rest-in-workflow-with-sharepoint-designer/
http://www.sharepointbay.com/assign-permission-rest-api/
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Change password for Domain\SAPservice SID and sid adm user

Hi guys
During NW711 installation, Ii gave OS User password different with master password.
Now i would like to synchronise the OS User password with master password(DDIC/SAP)
How to change the password for below users
SAP System administrator <Domain>\<sid>adm
SAP System Service User<Domain>\SAPService<sid>
Appreciate immediate response.
regards

Hi,
If I am not wrong you system is installed in windows. You can change the password in the domian controller under users OU or you can ask your domian administrator to change the same. But, I would recommend not to do this as after chaging the password the sap system will not start and you need to update the changed password in all the places wherever the mentioned IDs are used. For eg. in SAP_<SID> service and SAPOSCOL service.
Also, if the installation is in cluster then need to be more carefull and see where all need to update the changed password.
Thanks & Regards,
Sharath

Need help creating many, many users.

Hi,
I need to create around 500,000 users in the iFS schema in the quickest possible way.
The java API will do about 2 a second, which gives me an overhead of a few days?!?
Any suggestions would be greatly appreciated.
Thanks, this list has never let me down yet ;o)
Paul.
null

Paul, we have not tested creating that many users in iFS, so we don't know if you will run into any issues. And I don't have any timed stats for creating users through XML.
But we believe that using the Java API is the fastest way to create users.
You will want to create the users in batch, and disconnect between batches, as the JVM memory will increase during the create.
So you may want to create the users 10,000 at a time, and then disconnect and reconnect to create the next 10,000. Set your java MX setting for the JVM as high as you can (say, 768M), and then measure your memory usage for the first 10,000 users to see close to the MX setting the JVM gets.

Need to create form that user can fill out and SAVE in Reader

Hi,
My form, which of course works fine in Adobe Acrobat 4 CS4, is unsaveable when typed into with Acrobat Reader. It says at the top:
"Please fill out the following form. You cannot save data typed into this form. Please print your completed form if you would like a copy for your records."
*I know it's possible* to make it writable/saveable for Readers users, because I have here a form that someone else created, and in Reader the message says, "Please fill out the following form. You can save data typed into this form."
What setting do I need to change in Acrobat to make it saveable in Reader? Document attached.
Thank you in advance!!!!

WelltechSolutions wrote:
Phillip,
Thank you for the clarification.
I cannot seem to find the post that mentioned that this could not be done; perhaps it was for an older version of Acrobat. If I find it, I'll send you the URL.
This is a form that will reside on a web site for download, and the forms are used by individuals to track exercise as part of a community nonprofit wellness program. I doubt 500 folks will use it. We can monitor downloads.
If we need to go above 500 downloads, how would we go about purchasing a license for additional use? And, is there a chance that Adobe will increase this limit for a purpose that is non-commercial and non-profit?
Thanks.
I don't know the answers to the question about license for additional use, nor would Adobe increase the limit. I among other that were associated with Non-profits (I was treasury for an Electronics Association for 17 years) were the reason for adobe doing this to begin with. Before Acrobat 8, you had to use the other methods mentioned (The LiveCycle Server).

SAPInst error related to sid adm user creation

Hello,
I am doing SAP Netweaver 7.0 Installation (ABAP+JAVA) Stack.
The SAPInst completed the below 2 phases successfully. It errorred out in the 3rd phase, with message "Unable to modify account user="cmeadm" uid="3141"." as seen below. Can you let me know what is the cause for this error?
Please note that, surprising thing is, as seen below, it says cmeadm uid 3141 exists with parameter description.
Then in later below lines, it says
FSL-05014 Command '/usr/sbin/usermod' with parameters '-c "SAP System Administrator" cmeadm' failed with return code 6: UX: /usr/sbin/usermod: ERROR: cmeadm does not exist.
Why is it saying the cmeadm does not exist, when SAPInst confirms that it exists in the above line and in the below log file.
1- Check Solution Manager key -> SUCCESS
2- Install JCE Policy file              -> SUCCESS
3- Create users for SAP System. - > ERROR seen below.
TRACE      2009-11-30 12:18:40.844 [syuxcuser.cpp:519]
           iastring CSyUserImpl::getDescription() const
           lib=syslib module=syslib
account user="cmeadm" uid="3141" exists with parameter description="cmeadm"
TRACE      2009-11-30 12:18:40.846 [syxxcnamrs.cpp:346]
           bool CSyIPNameResolverImpl::isNISRunning() const
           lib=syslib module=syslib
NIS is not running
FSL-05014 Command '/usr/sbin/usermod' with parameters '-c "SAP System Administrator" cmeadm' failed with return code 6: UX: /usr/sbin/usermod: ERROR: cmeadm does not exist.
Unable to modify account user="cmeadm" uid="3141".
Failed action: with parameters
Error number 211 error type SPECIFIC_CODE
Thanks!

Hi,
what is output of command:
cat /etc/passwd | grep cmeadm
Are you running sapinst under root user?

XI Installation: invalid XI SAP sid adm password

During an initial XI installation on top of an ABAP + JAVA NW04 system. In the Java Deployment > Windows Domain installation step i am unable to enter the correct SAP <sid>adm password with below error message:
"Invalid password. DIAGNOSIS: The password you specified for user 'xi2adm' is wrong. SOLUTION: Enter the correct password."
In the sapinst_dev.log is the following:
TRACE      [iaxxgenimp.cpp:845]
           showDialog()
waiting for an answer from gui
TRACE      [iaxxcnclhd.cpp:101]
           CCancelHandler::doHandleDoc()
CCancelHandler: ACTION_ERROR received
TRACE      [iaxxdlghnd.cpp:187]
           CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_ERROR received
TRACE      [iaxxdlghnd.cpp:98]
           CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_NEXT requested
TRACE      [synxcuser.cpp:517]
           bool CSyUserImpl::checkPassword(iastring sPassword) const
checking password of user xi2adm failed
TRACE      [iaxxdlghnd.cpp:322]
           CDialogHandler::doHandleDoc()
Invalid password. DIAGNOSIS: The password you specified for user 'xi2adm' is wrong. SOLUTION: Enter the correct password.
Any insights would be greatly appreciated.

Vivian Liu,
   I am trying to install XI on Windows2003/sql server.
I have installed os/sp3/sqlserver/patches/Central Instance/Db instance.
I have used Administrator account to install this.
1. When do i need to create <SID>adm user?
2. If you have any installation notes with the sequence of steps, can you please send it to me at [email protected]
Thank you
Gangas Leaves

OPS$ SID ADM where SID is SR3???

Hello,
I was upgrading my kernel last week and when i checked my dba_roles... i find an ops$sr3adm....and not a ops$<sid>adm...
Can somebody tell me why? 'Cause i had always see a ops$<SID>adm.
When you drop this user (SR3) and you create an other one with the good name and the same rights, it made an error.
Thanks in advance for helping me.
Florent

Hi Eric. I am seeing the same OPS$SR3ADM Oracle User as you had, in some of our newer JAVA Stack systems and I am wondering:
a) Where does it come from?
b) Why is there no OPS$<SID>ADM user?
c) What you did to resolve it.
We have no SID = SR3 anywhere in our environment.
Our unix id's are <sid>adm and ora<sid> as per standard.
We do have an OPS$ORA<SID> in the database, as expected.
Naturally, some things to not function as expected from our <sid>adm Unix user, since there is no corresponding OPS$ Oracle user.
Any thoughts are appreciated.

Upgrade assistant Server error: your username is root, but must be SID adm

Hi GURU's,
I am working on "Combined Upgrade & Unicode Conversion" 4.6C ==> NW2004s
When starting Upgrade assistant and continuue with upgrade getting following error:
Server error: your username is root, bu must be <SID>adm
I have option to continue, or cancel
When I choose "Continue" Upgrade assistant disconects from Upgrade server
Has someone any idea, what is the reason, and how can I solve this issue.
PS: I have also tried to start upgrade with <SID>adm user, but the same error.
Thanks for your help in advance.

Hi,
The whole upgrade should only be executed using <sid>adm, not root. I suggest to re-run the upgrade using <sid>adm user.
Also ensure all files in /put directory have correct permissions.
Cheers!

How to Login as SID adm in SAP Hana

Hi Experts,
i want the steps to login as <sid>adm user in SAP Hana studio and SAP Hana database.
So that i can start services and Stop services as well.
Below is the error messages i get by trying to change to <sid>adm that is s2padm.
Urgent help on the steps to login as <sid>adm to connect to studio and to be able to stop and start services.
Regards,
Justice

Hi Justice,
Check if this helps: http://help.sap.com/saphelp_hanaplatform/helpdata/en/c9/21e48bbb5710148124c0eeddab166d/content.htm?frameset=/en/50/b9056b780f4072a88237bbd2352cf8/frameset.htm&current_toc=/en/c8/aa369bbb57101497c4e0f9c1028266/plain.htm&node_id=19&show_children=false
http://help.sap.com/saphelp_hanaplatform/helpdata/en/bf/7b3028bb5710148dabc55a36240ee6/content.htm?frameset=/en/4c/d17057d2cd4888820666d1891b9836/frameset.htm&current_toc=/en/00/0ca1e3486640ef8b884cdf1a050fbb/plain.htm&node_id=15
The Admin Guide of HANA is extremely useful. The one on the help portal is for SPS08 but is still quite relevant.
Best

How do I create a new user account?

I have a new iPod with a different iTunes account than my other devices. How do I sync the iPod on my iMac with the songs/movies from its own iTunes account? Do I need to create a new user profle on the computer for that?

As you said, I recommend to create a new user account and create a new iTunes library on that user with the content of the iPod. If you sync it with your user account, you will get on the iPod the content from a different Apple ID and maybe content that you don't want.
To create a new user account, open System Preferences > Users & Groups, and press the + button that it's below the left sidebar (where users are listed). Then, just follow the steps to set up the user account.
Now, every time you start your Mac, OS X will ask you the user account you want to start OS X with

How can I create a new User with the Java API like OIDDAS do?

Hello,
I'm currently working on an BPEL based process. And i need to create an OCS user. So far I can create an user in the OID. But I cant find any documentation about given this user an email account,calendar and content function etc.
Did anybody know if there are some OIDDAS Webservices? Or did anybody know how to do this using the Java APIs?

You are asking about a Database User I hope.
You can look into the Oracle 8i Documentation and find various privillages listed.
In particular, you may find:
Chapter 27 Privileges, Roles, and Security Policies
an intresting chapter.
You may want to do this with the various tools included with 8i - including the
Oracle DBA Studio - expand the Security node and you can create USERS and ROLES.
Or use SQL*Plus. To create a
user / password named John / Smith, you would login to SQL*Plus as System/manager (or other) and type in:
Create user John identified by Smith;
Grant CONNECT to John;
Grant SELECT ANY TABLE to John;
commit;
There is much more you can do
depending on your needs.
Please read the documentation.
-John
null

When do i need to create SID adm user?

Similar Messages

Maybe you are looking for