When do the Ripple Delete and/or Join commands become active?

I have been using Soundtrack Pro for a while, but I have not been able to use the Ripple Delete and Joind commands. Under which conditions do these commands become available? Does the Ripple Delete command work like in FCP? I use ProTools, and I would love Soundtrack to include something like the Shuffle mode, in which removing a section on the Timeline would make the rest of the audio samples on that track move up.
Is this possible? I know this can be done on the audio editor, but sometimes editing to picture requires doing this on the Timeline.
Thanks in advance for the help!
Powerbook G4/G5 1.8 GHz Mac OS X (10.4.6)

Great tip Simon - but do you not find this a bit irritating - that you have to go through this extra process just to perform a ripple delete?
The other point here, is that if you make two cuts in a clip, and then drag over the timeslice section, even with snapping turned on, it seems easy to me to not pin-point the edit in quite the same way that you do with a simple cut. By dragging over, if you miss the edit point by a fraction, you can end up ripple deleting over the cut you intended to make.
Sadie does all this with so much more ease in my view... a lot quicker when doing very fast editing. I'm surprised that with a 'pro app' tag, apple haven't gone the extra few yards with STP. Doesn't quite cut it (in my view)
Ant
G5 2GHz dual, PowerBook G4 Mac OS X (10.2.x)

Similar Messages

My husband and I both have iPads and somehow when they were setup the both we're setup using the same email I'd address. When I go to delete and rename one iPad it says all info and pictures will be erased from my iPad. Is there a way to keep the info iPa

My husband and I both have iPads and somehow when they were setup the both we're setup using the same email I'd address. When I go to delete and rename one iPad it says all info and pictures will be erased from my iPad. Is there a way to keep the info IPad when doing this?

You can go to Settings/iCloud and delete the account, then create a new iCloud account. You can still use the same account for the app store though.

Adobe Premiere Pro CS5.5 crasing from ripple delete and copy

I've been using Adobe Premiere Pro CS5.5 for several months now and it's been working with next to no problems and I've been very happy with it until today.
As I've neared the end of a recent project, after doing nothing different than usual I went to use ripple delete and every time I try it I now get this error message:
Premiere Pro Debug Event
Premiere Pro has encountered an error.
[..\..\Src\Sequence\Action\ClipTrackRippleAction.cpp-56]
Then:
Sorry, a serious error has occurred that requires Adobe Premiere Pro to shut down. We will attempt to save your current project.
Then:
Microsoft Visual C++ Runtime Library
Runtime Error!
Program: C:\Program…
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application’s support team for more information.
Then:
Adobe Premiere Pro CS5.5 has stopped working
A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
[Close program]
Then if I try to copy clips or move multiple clips this error message shows up:
Premiere Pro Debug Event
Premiere Pro has encountered an error.
[..\..\Src\Sequence\Action\SequenceAddTransitionAction.cpp-57]
Then:
Premiere Pro Debug Event
Premiere Pro has encountered an error.
[..\..\Src\Sequence\TrackItemTrack.cpp-639]
Then:
Microsoft Visual C++ Runtime Library
Runtime Error!
Program: C:\Program…
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application’s support team for more information.
Then:
Adobe Premiere Pro CS5.5 has stopped working
A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
[Close program]
I am, however, still able to move single clips, adjust the length of individual clips and able to watch my project.
I've tried two different computers and restarted one and nothing has changed.
Is there an explanation as to why this is happening? Is there anything I can do to get around this or make it stop?

Lord Nelson here.
I've reverted back to 5.5.0 as I was experiencing lock-up problems with the BM Intensity Pro.
Unfortunately I haven't found a way of simply uninstalling the update and reverting back to an earlier version. Win 7 Sytem Restore wouldn't, so I had to uninstall Premiere Pro, apply the Adobe Clean Install utility (or whatever!) and then reinstall PP CS5.5. Trouble was that it reinstalled the whole suite, not just PP - so I lost all custom workspaces across the suite.
Grrrrr!

My Windows part of the drive got all of the files deleted and got renamed

My Windows part of the drive got all of the files deleted and got renamed to Time Machine Backups. This all happened when i woke up and i tried to do to the windows part of the drive and it was not there. So I went to the mac part and i saw it was renamed to Time Machine Backups. So then I clicked to see if any thing was in the part. Nothing. I tried to go to boot camp assistant it said -The startup disk cannot be partitioned or restored to a single partition. The startup disk must be formatted as a single Mac OS Extended (Journaled) volume or already partitioned by Boot Camp Assistant for installing Windows.-So Then I went to disk utility to erase it but it did nothing. PLEASE HELP ME

1. Time machine probably has the disk locked. Go into time machine preferences and turn it off.
2. open DU (disk utility), see if you can dismount the boot camp partition. If not, log out, log back in and try again with DU. Once it will mount and dismount go to step 3.
3. In DU select the boot camp volume, select erase, select msdos file system (format), select name for partition, select erase.
4. Close DU, Open preferences > system > startup disk.
5. Highlight the msdos partition, close preferences (this blesses the msdos partition and sets it to boot).
6. Place your windows cd/dvd in the tray, close tray and reboot.
7. Install windows.
8. After complete installation, select run, type in "cmd" (in windows).
9. A windows terminal will open, at the prompt type:
convert c: /fs:ntfs
press enter, it will ask if you want to schedule the conversion at the next startup?.
10. Select yes. Time machine will leave a ntfs drive alone, simply because it cannot write to it.
11. Reboot windows and let it convert the file system. That's it.
Kj

'An unknown error occurred' when exporting the ibook. And it failed to preview on ipad, too.what can I do? Thanks!

'An unknown error occurred' when exporting the ibook. And it failed to preview on ipad, too.what can I do? Thanks!

One of the following steps should help.
Go step by step and test.
1. System Preferences > Other/ Flash Player > Advanced > Delete All
     Press the "Delete All" button
     Install Adobe Flash Player.
    http://get.adobe.com/flashplayer/
    Quit Safari.
    Restart computer. Relaunch Safari.
2. Enable Plug-ins
    Safari > Preferences > Security
    Web Content: > "Enable Plug-ins".
       or
    Internet Plug-ins > "Allow all other plug-ins
3. Check whether you are currently in YouTube HTML 5 trial.
     http://www.youtube.com/html5
    At the bottom left of the page uncheck the box beside
   "You are currently in the HTML5 trial".
4. Reset Safari.
    Click Safari in the menu bar.
    From the drop down select "Reset Safari".
    Uncheck the boxes beside all items.
    Check the box beside "Remove all website data".
    Click "Reset".
5. Turn off Extensions, if any.
    Safari > Preferences > Extensions
     Now try YouTube.
Best.

Recent ipad owner, I can't delete mail messages. I tap the bin, delete and get message:unable to move message to mailbox trash. How can I trash my mail?

As a recent ipad owner I can't delete my mail. I tap the bin, delete and get info that message can't be moved to mail trash. Help! I have a hundred messages that need deleting.

You can download a complete iPad User Guide here: http://manuals.info.apple.com/en/ipad_user_guide.pdf
Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
Apple - iPad - Guided Tours
http://www.apple.com/ipad/videos/
Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
iPad How-Tos http://ipod.about.com/lr/ipad_how-tos/903396/1/
You can download this guide to your iPad.
iPad User Guide for iOS 5
http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
 Cheers, Tom

My iMessage stopped working when I did the latest update on my phone. I have literally tried everything to reset it. I am currently not in the US, but my iMessage has always worked when I was in wifi and my phone is still activated.

My iMessage stopped working when I did the latest update on my phone. I have literally tried everything to reset it. I am currently not in the US, but my iMessage has always worked when I was in wifi and my phone is still activated. I have tried to reset my network settings, my location, and even the reset all settings. When I click on my settings and iMessage it says that it is still waiting for activation... and my phone number is grayed out. I am able to recieve an iMessage to my email and that could work for right now but i'm not sure how to start a conversation the defaults to being sent from my email and not my cell phone number. please help!

Hi shanny202.
Really strange problem you have there. I have a few questions though.
Please try again and try to make the phone as a new without restoringen with you iCloud-data or backup-data from iTunes. Maybe it is something wrong with the data (strange).
Anyway, i think you should call Apple Support or visit an Apple Store, don't forgot to make a Genius Bar reservation.
You locate the nearest Apple Store here: http://www.apple.com/retail/storelist/
And here is Apples phone numbers around the world for support: http://support.apple.com/kb/HE57

When opening the Coloursync utility and pressing the verify button, I received an error message stating that the Tag 'cprt':Text tag has an incorrect length which could not be fixed as the file is locked. Does anyone know how to rectify this?

When opening the Coloursync utility and pressing the verify button, I received an error message (copy below) stating that the Tag 'cprt':Text tag has an incorrect length which could not be fixed as the file is locked. Does anyone know how to rectify this?
Checking 25 profiles...
/Library/ColorSync/Profiles/Displays/iMac-00000610-0000-9C6C-0000-000004271B00.i cc
   Tag 'cprt': Text tag has an incorrect length.
   The file is locked. Could not be fixed.

Hi guys,
I followed the steps to unlock the .icc file in the "getinfo" screen then went on clicking repair in colorsync utility.
This is the message i got:
Searching for profiles...
Checking 17 profiles...
/Library/ColorSync/Profiles/Displays/Color LCD-00000610-0000-9CF3-0000-000004273CC0.icc
   Tag 'cprt': Text tag has an incorrect length. Fixed.
Repair done - 1 profiles fixed.
However, when i hit verify again it shows up like this:
Searching for profiles...
Checking 17 profiles...
/Library/ColorSync/Profiles/Displays/Color LCD-00000610-0000-9CF3-0000-000004273CC0.icc
   Tag 'cprt': Text tag has an incorrect length.
Verify done - found 1 bad profile.
... and it keeps like this sine die.
when i open the .icc file it shows up like this:
3     'cprt'     'text'     35     Copyright ASCII Text String
New to mac so I really don't know what to do.
I didn't get this message so far. What i did before getting this message was to open a jpeg file. I wanted to edit it so when i did right click on the file i went to open with, and colorsync came as an option; so i chose it.
Then this message started comming up.
Is there anything i can do?
Thabks for the support.

When using the move tool and or crop tool my whole screen goes black

When using the move tool and or crop tool my whole screen goes black and reappears when I go to another tool???

Hi 25Z4P,
Could you please take a screenshot of the problem you're encountering. I'm sure it is a black screen like you're describing, but it would be helpful to assess what is happening.
Thank you.

Since upgrading to 10.9.3, am unable to connect to wi-fi now. When I try to delete and re-add the network, it says password is incorrect, though it's never changed on the router

Anyone else having trouble with the 10.9.3 Mavericks upgrade. Machine goes to sleep, won't re-connect to the wi-fi I've been using for nearly a year. Deleted all wi-fi networks and locations, went back to start from scratch, not can't add any wi-fi, can see the wireless network and select it, but when I try to enter the password, I get 'password is incorrect' or when I try to connect and finally do enter a password, it says 'Connection timed out'. Very frustrating. No settings have changed on the wireless network as iMac and iPads are still connecting fine.

Take each of the following steps that you haven't already tried, until the problem is resolved. Some of these steps are only possible if you have control over the wireless router.
Step 1
Turn Wi-Fi off and back on.
Step 2
Restart the router and the computer. Many problems are solved that way.
Step 3
Change the name of the wireless network, if applicable, to eliminate any characters other than letters and digits. You do that on your router via its web page, if it's not an Apple device, or via AirPort Utility, if it is an Apple device.
Step 4
Run the Network Diagnostics assistant.
Step 5
In OS X 10.8.4 or later, run Wireless Diagnostics and fix the issues listed in the Summary, if any.
Step 6
Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Enter the name of your wireless network in the search box. You should have one or more "AirPort network password" items with that name. Make a note of the name and password, then delete all the items. Quit Keychain Access. Turn Wi-Fi off and then back on. Reconnect to the network.
Step 7
You may need to change other settings on the router. See the guidelines linked below:
Recommended settings for Wi-Fi routers and access points
Potential sources of interference
Step 8
Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
Step 9
Reset the System Management Controller (SMC).

Ripple Delete and Chapter Marker question

Hi All,
If I ripple delete a section of a clip ( and I guess more generically, if one cuts/inserts) are the chapter markers on the timeline kept in sync with the remaining clips. And if not, is there a workaround.
Thanks

I think Patrick is referring to this
What are question answers?
When a community member posts a question as a topic starter, other members can post an answer in reply. Please note that not all replies actually answer the question.
An answer can be just some hints or helpful information to help the poster solve an issue. The originator of the topic can mark such a reply as a "Helpful" post. A small yellow star will appear next to that reply and the person who posted the reply will be awarded 5 points. Here's what a reply marked as being "Helpful" looks like:
If a community member posts a specific answer that provides a solution to the original poster's issue, the originator can mark this reply as a "Solved" post. A large green star will appear next to that reply and the person who posted the reply will be awarded 10 points.
Only the original topic poster has the option to mark replies as either Helpful or Solved or to not mark a reply at all. The originator can also end the discussion by marking the topic as "answered," which displays a green star at the top of the topic page to let everyone know that the topic contains valid helpful information.
Note: Only two replies may be classified as Helpful and only one reply may be classified as Solved in any question topic. Non-question topics do not offer these classifications
This isn't so much about points, but to make the forums useful for searches. If you search for the answer to a question that's been asked a hundred times before, the green stars tell you which answers solve the problem or at least answer the question asked.

SAP GUI gets closed when executing the transactions SE38 and SE80

Hi SAP Gurus,
I am new to this forum and SAP too. I am part of BASIS.
This issue is regarding transactions SE38 and SE80. The system gets closed when trying to open the transactions SE38 and SE80.
I checked the authorizations, it is fine. The copy user works well.
Then found that it may be regarding SAP GUI.
For solution, referred: https://scn.sap.com/thread/2099868
Steps:
      Uninstall the sapgui
      Manualluy delete the folders related to them like
         X:\users\YourID\Documents\SAP
         X:\users\YourID\AppData\Local\SAP
         X:\users\YourID\AppData\Roaming\SAP\Common
      Re-install using the latest patch available
Even after doing this the issue still persists.
Over here one thing is clear that it is not regarding authorization and all because the copy user works fine. For the system, administrator credentials are working well but only the person's user ID faces this issue.
Someone please help me out in this regard.
Thanks in advance.

Hi Shiva,
     Which GUI Version you are using...Please use latest 7.3 Version to avoid any issues related to GUI logon....
Can you clarify these doubts...
1. Are you able to use remaining Tcodes except SE38 and SE80..?
2. Are you getting any error before close the session?
3. If particular user id is facing this issue, then use that credentials and try to check from your end whether you are able to open that tcodes or not..
Regards
Santosh K

Ripple Delete And Move Markers Too?

I'm looking for a way to ripple delete this gap in such a way as to move the chapter markers with it. Is it possible to set the edit line to the beginning of the clips and set the timeline to zero? Seems there used to be a way to do this, but I don't see it.

lovely!
i just ran into the same need in CS6. is there a possibilty aswell?

When does the JVM exit and deleteOnExit();?

I developed a JSP that queries a database, displays the results in a browser, and writes the results to the server as a file. While the user is viewing the JSP, they can click on a download link to save the file that was written to the server. Everything works fine!
I would like to delete the file that was written to the server (to save space), however, I can't delete the file until the user is finished viewing the JSP. I need some help concerning this method: java.io.File.deleteOnExit() the API states:
"Requests that the file or directory denoted by this abstract pathname be deleted when the virtual machine terminates. Deletion will be attempted only for normal termination of the virtual machine, as defined by the Java Language Specification (12.9)."
If I use this method, When does the JVM exit? I tested it in my home environment using Tomcat and the file was deleted when I stopped Tomcat. If I run this on a web server, does the JVM ever exit? If so when?
Thanks
--Scott

The JVM stays active so long as the Java based webserver (or the servlet engine if your webserver is connected to one) is up. Only when you shutdown your server will the VM terminate. (Similar to what you observed with tomcat)

Why does the earphone jack on the HPdv7 NOT work when on the notebook stand and using replicator?

My Pavilion dv9815nr let me plug my earphones into the pc while it was on the desk extender or stand, and the sound of the speakers would be cut out -- which was especially a good idea late in the evening and helped keep peace in the family. I liked this VISTA machine very much and was quite happy with it for not quite 3 years. Unfortunately, the Optical drive gave out, or at least the BUS died and the techies recommended the purchase of a new machine since a repair was apparently expensive. In order to stay closely to the concept of a full keyboard laptop using a notebook stand with wireless keyboard and mouse, I bought end March a Paviliion dv7 as a replacement machine. Other than a series of minor mishaps, most of the problems were encountered with the peripherals and I am on a second wireless keyboard, mouse and replicator. Also a number of odd occurrences related to audio were fixed by obtaining the proper drivers. but now I have encountered something that appears to be simply sloppy design. When this laptop is in use on the notebook stand and linked to the replicator, the earphone jack on the left side of the PC is dead. The jack works fine and cuts out the speakers when the USB lead for the replicator is removed. There is a very impractical solution to the problem and that consists of plugging the earphone mini-plug into the jack located on the replicator. Since the replicator has a niche location on the back of the notebook stand, this is not a very practical solution. Any good ideas to get around this?

I went through the installation where the bar shows the percentages downloaded and installed. Once it shows 100% it asks me to click Finish. I do. Then I go to yahoo to check and it continues to show that the plugin is missing and that I need to download Adobe Flash which I thought that I just did. Am I missing something in terms of installing??
Kent M. Farrar

When do the Ripple Delete and/or Join commands become active?

Similar Messages

Maybe you are looking for