When do we reset cocd in asset accounting

Hi Experts,
I would like to know when do we use the process of reset cocd, I have checked the threads when people are trying to change
Dep key settings they are doing reset cocd. so far I have not fully involved in Asset Accounting so I am getting knowledge through the SCN threads.
Usually if there is change in Dep key, we change Dep key and we can run AFAR to change planned values.
If we want to change posted Dep then we can change Dep key and can run AFAB repeat run then the difference will get posted.
Instead of using above two why we have reset cocd, Has not been  the Dep key changes allowed in production environment ? if yes tell me why.
Thanks,
Surya

Hi Surya
Reset Company code option SHOULD NOT be used in Prod systems. It is only for test systems.
When we are in the development or test environments, we do a lot of configuration combinations to find the right fit. This option is used in such cases where we start fresh in the search for the right combination.
Regards
Sowmya

Similar Messages

  • How to delete depreciation areas when a posting is made in asset accounting

    Hi All,
      We are implementing asset accounting to few of our company codes as a new company code start up project. We have opened depreciation areas for tax for one company code and found that we are not going to use this company code for asset accounting.
      We have already opened 2 depreciation areas one for tax and the other as difference between book and tax depr in our development client. One of our member has created an asset and posted values to it. Now, we were told that we dont need to open the depreciation areas. When i am trying to delete it system giving error message saying you cannot delete the derived depr as the values have already been posted.
    Please advice how i should proceed with the above issue for deleting the depreciation areas. Your help is much appreciated.
    Thanks in advance

    Hi Rose,
    For the below mentioned issue do the following:
    1) reset all the depreciation data ( t code OAGL)
    2)  reset all the asset account co code data (t code OABL)
    then u can go and delete the depreciation areas.
    regards,
    Kiran

  • Error in Asset Accounting Specify Intervals and Postings Rules

    Hi,
    I am configuring for Asset Accounting and when I go to this part:
    Asset Accounting > Integration with the General Ledger > Post Depreciation to the General Ledger > Specify Intervals and Postings Rules
    I get the error "Company code XXXX is not defined" (message no. AC519).
    The company code specified in the error was deleted in the system before. I am thinking that there is a table where this company code is not yet deleted. How can I solve this? Thanks a lot.

    Create the company again, make your changes and delete the company again

  • HT1349 I have an old apple ID # that I used to purshase hundreds of dollars of I-Tunes.  Unfortunately I cannot reset the PW because the email account no longer exists so when it says it is sending information to reset PW to email account it is going nowh

    I have an old apple ID # that I used to purshase hundreds of dollars of I-Tunes.  Unfortunately I cannot reset the PW because the email account no longer exists so when it says it is sending information to reset PW to email account it is going nowhere.  How am I able to reset the PW.  Also, when it asks for my birthdate in order to reset it that way I use the birthdates of everyone in my family and not one works.  Please help.

    Try contacting iTunes store support: http://www.apple.com/emea/support/itunes/contact.html.

  • I am very confused. When I wanna to update my apps in app store, it shows the account which is my iPhone one is not my iPad one. how can I reset to my iPad account?

    I am very confused. When I wanna to update my apps in app store, it shows the account which is my iPhone one is not my iPad one. how can I reset to my iPad account?

    And I am very confused by your query. Your iTunes account is the same on all devices - unless of course you have multiple accounts to begin with.
    If you do have another Apple ID that you use for the iPad purchases, you can sign out of the account that is on the iPad in Settings>Store.
    Perhaps a few more details from you could clear up the confusion???

  • I forgot my apple id password and i already deleted my yahoo account for that apple id. When i try resetting it for security question, my birthday verification says invalid. How can i retrieve my password for a swleted yahoo account?

    I forgot my apple id password and i already deleted my yahoo account for that apple id. When i try resetting it for security question, my birthday verification says invalid. How can i retrieve my password for a swleted yahoo account?

    http://support.apple.com/kb/ht5312
    Note: The option to send an email to reset your security questions and answers will not be available if a rescue email address is not provided. You will need to contact iTunes Store support in order to do so. 

  • I have a problem in the liquefaction of confidentiality and answers when asked to reset the answers but remembered email added halted from by Microsoft Corporation, Is it possible to cancel the account and send the answers added on my email and thank you

    Dear,s
    I have a problem in the liquefaction of confidentiality and answers when asked to reset the answers but remembered email added halted from by Microsoft Corporation, Is it possible to cancel the account and send the answers added on my email:
    <Email Edited by Host>
    Thanks

    You are not addressing Apple here. And your post is a bit confusing. See Klaus's answer in this thread:
    https://discussions.apple.com/thread/5228474?tstart=0

  • I can't find an option to add a recovery email for the purpose of resetting my security questions. There is also no option when I am in the "manage my account" area that lets me reset my security questions. How can I reset them?

    I can't find an option to add a recovery email for the purpose of resetting my security questions. There is also no option when I am in the "manage my account" area that lets me reset my security questions. How can I reset them?

    1. See my User Tip for some help: Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities.
    2. Here are two different but direct methods:
        a. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
        b. Call Apple Support in your country: Customer Service: Contacting Apple for support
            and service.
    3. For other queries about Apple ID see Frequently asked questions about Apple ID.
    4. Rescue email address and how to reset Apple ID security questions
    5. For online assistance use Apple - Support - Express Lane

  • How to change account determination in sap asset accounting when there is a

    Dear experts,
    how to change account determination in sap asset accounting when there is a posting in previous one.
    thanks in advance
    Deboleena Ganguly

    HI:
    You can easily change the account determination of asset class . There is an OSS note regarding the correction of issue which you will face while changing account determination for which there are already posted fixed assets
    Error message AC476 upon change of account in AO90  can be customized now
    via transactions OBMSG...Application Area-AC
    Note 202746
    Under certain circumstances, it may still be necessary to make a change
    to this account.By implementing this note, the above error message is
    replaced by a warning message.Following account maintenance, you may
    need to carry out manual intracompany transfers in FI in accordance with
    Note 69225.
    Regards
    Edited by: Atif Farooq on Oct 31, 2011 11:44 AM

  • I forgot my apple Security Question. So when I Redeem Some money to my account and I want to purchase it's need the security question, I forget it. So how could I reset my security question of apple ID?

    I forgot my apple Security Question. So when I Redeem Some money to my account and I want to purchase it's need the security question, I forget it. So how could I reset my security question of apple ID?

    1. See my User Tip for some help: Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities.
    2. Here are two different but direct methods:
        a. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
        b. Call Apple Support in your country: Customer Service: Contacting Apple for support
            and service.
    3. For other queries about Apple ID see Frequently asked questions about Apple ID.
    4. Rescue email address and how to reset Apple ID security questions

  • Vat charge when we sale asset through asset accounting f-92

    what configuration settings we need to be done to charge vat on asset sale through asset accounting f-92.

    Hi Abhi
    What I have seen clients doing is this:
    They post F-92 to remove the assets from the assets register...Either with or without tax
    Then they post VF01 with 100 discount so that VF01 posts only the Tax amount incase its not posted in F-92
    Later on you can print the invoice from SD and pass it on to the customer
    br, Ajay M

  • Where we have to open and close posting periods in asset accounting

    hi sap gurus
      can anybody give where we have to open and close posting periods in asset accounting
    thank you
    venkatareddy

    Hi Venkatareddy,
    You make specifications for fiscal years and posting periods in the SAP R/3 System in Customizing for Financial Accounting. This is done in the fiscal year variant in the global parameters of the company code. These settings are, in general, also binding for Asset Accounting. The depreciation periods in Asset Accounting then correspond to the posting periods in Financial Accounting.<b> It is usually not necessary to create a separate fiscal year variant for Asset Accounting.</b>
    The period control in the depreciation key determines the start and end of depreciation when asset transactions are posted . The period control determines the relationship between the calendar period in which the asset transaction is posted and the depreciation period.
    These calendar periods are independent of the posting periods in Financial Accounting. The only restriction is that the beginning of the first calendar period and the end of the last calendar period defined in a period control have to match the start date and final date of the fiscal year in Financial Accounting.
    Kindly let me know if this useful for you

  • New Blogs:  Asset Accounting and Project Systems

    There are two new blogs out this month in the ERP space.
    Dominic Nadeau has blogged about a useful tcode in PS to track changes to a project.
    /people/dominic.nadeau/blog/2008/06/09/fields-in-problem-in-a-project
    I've written a blog on the Schedule Manager Monitor.  I've given an example related to Asset Accounting but it works for most all areas in FI/CO.
    /people/nathan.genez/blog/2008/06/17/gaining-more-insight-into-fixed-asset-job-monitoring
    -nathan

    When you create the WBS in will create from there an AUC. In the auc in the tab origin you see the project number.
    When you settle it from the AUC (in PS) to the final asset you found the AUC number back in the asset tab origin. You can click to on the posting on the asset

  • Clarifications in Asset Accounting

    Dear Experts,
    Please clarify below questions.
    1) What is the difference between Depreciation Area and Depreciation Key?
    2) What is the importance of Recalculate value button in Asset Accounting?
    3) Suppose I have 1000 assets, if I want to run depreciation only for 200 assets how can I do that?
    4) If suppose I have 5 Depreciation areas, I am able to see the book depreciation values only, where I
        can see the other depreciation values? If we can’t see for which purpose we are using other
        depreciation areas?
    5) Vendor and Customer balances get update regularly or once in a month or year?
    6) Where we have to create number ranges either in Production or Development Environment?
    7) How can we transfer GLs from one environment to another?
    Full points will be assigned as way of thanks
    Regards,
    Vineela

    Hi Krishna,
    Thanks for your reply,But still I need some more clarifications please respond........
    2) What is the importance of Recalculate value button in Asset Accounting?-
    (A)recalculates depr when asset parameters are changed
    Where it will be there as it(recalculate button) is not there in AFAB
    3) Suppose I have 1000 assets, if I want to run depreciation only for 200 assets how can I do that?
    (A)select those 200 and run depreciation
    Here Assets Selection option is there only in test run not there in update run.
    4) If suppose I have 5 Depreciation areas, I am able to see the book depreciation values only, where I can see the other depreciation values? If we can’t see for which purpose we are using other depreciation areas? (A)use AW01N- you cans ee all dep areas
    In AW01N only book depreciation values is displayed,how can I see other depreciation area values
    Regards
    Vineela
    Edited by: Vineela Siri on Apr 9, 2008 7:22 AM

  • FICO : Asset Accounting - Depreciation Run Issue

    Dear Friends,
    I have an issue in asset accounting.
    Let me explain the actual background of this issue.
    1. I created a new company code(2000) by copying the existing one(1000 along with the closed year 2009
    2. After that when i was trying to post acquisition for an asset i got the below error
    You cannot post to asset in company code 2000 fiscal year 2011
    3. Then i closed the year 2010 and opened 2011, it allowed me to post in the month of june
    4. Now i am trying to run the depreciation for june, its giving the below error.
    According to posting cycle, you should post period 001 next
    5. What could be the reason for this error , is it the correct procedure what i am doing it now?
    Please help if someone has an idea about that
    Thanks ,
    Perumal.

    Hi,
    You can get the solution if you double click the error message.
    Please note that depreciation of current month can only be posted if the depreciation dycles till the previous month is completed. Coming to your case, you have opened the year 2011 and trying to post depreciation for period 6. You need to run the depreciation cycles from period 1 to 5 before trying to post for period 6.
    Regards,
    Kiron Kumar T.

Maybe you are looking for