When do we use CE plan operators in HANA? any specific scenario?

when do we use CE plan operators in HANA? any specific scenario?

With current versions of SAP HANA you can avoid using CE-functions completely.
There's usually no need to choose them over plain SQL code,
- Lars

Similar Messages

  • My iPhone 3GS will hold a full charge for only a short time, and gets very hot when not in use in my shirt pocket.  Any ideas?

    My 3GS iPhone will not hold full charge for very long.  It gets very hot in my shirt pocket even when hot in use.  Any ideas?

    Double-tapping the home button does not show apps that are running.  This is not a task manager, it is merely a list of recently used/accessed apps.
    Basic troubleshooting of the device is reset, restart, restore.  Has a reset or restore been tried?
    Check to see if updates exists for the apps, this could be a simple issue of a badly coded or buggy app that needs to be updated.

  • How do you reset the security questions when you havent used a credit card to make any purchases, only the gift cards. Apple support will not help me even though i know my account and apple id and password?

    Have a new computer and now cannot access itunes without knowing the answers to the security questions. Apple support cannot reset as we have never used a credit card when purchasing prior, have only used gift cards. Can provide apple id and password and all other account details but still no help. Have we to open a new3 account and start again, this means losing a lot of credit on the existing account?!

    I have the same problem. I didn't set a rescue email for some reason. To find out weather you hav a rescue password: Go to appleid.apple.com, sign in, go to manage account and then password and security if you do there will be a link below telling you that you can send an email to it. If not the link won't be there. Hope this helps.

  • How do I open a port needed to run an application when I am using wireless internet at a hotel? Specifically port 13000?

    Hi all! I am trying to use an application called freephoneline.ca which gives you a phone number that people can call via an app on your computer. It was working perfectly at home but now I am at a hotel and I am not getting any sound. From running a test it tells me:
    "Unable to send/receive sound data! Port 13000 should be available"
    Help?
    I am on OS X 10.6.8
    I really need to be able to use this application today, any help would be greatly appreciated.

    The hotel has probably blocked all but the most common ports for security or bandwidth reasons. The port is not blocked/closed on your computer by default.

  • When I am using the browser for a while and try to use ANY search bar and hit the "search" button it does a whopping NOTHING is there anyway of keeping this from happening?

    Whenever I am using Firefox mobile - either regular, beta or aurora and go to search for something like through the Google search page and attempt to search for something the search bar does nothing and hitting the enter button instead doesn't do anything either. Is there a way to keep this from happening?

    Hi and thanks to not leaving the firefox user alone.
    Cor-el your answer is right as the madperson is and I already knew all these
    answer and I said that before I don’t use any antivirus and I always turn off my firewall from the moment I installed my Windows.
    I even turn off any automatic update for any of my software and I never let any unknown plugins or any thing like that be install without informing me. And if you know some things like Offline Storage and cookies must be to much more than usual and you have to clear them and delete them and I know so much more
    And if you want to know it fixed now. But I don’t know how?
    For understanding my problem read and research about Ixplorer.exe virus it is the same problem about the speed but the different is it doesn’t show any process in task manager like Ixplorer.exe virus
    Bt I have done some things but still I don’t know that’s why it is fixed or not
    First: I searched my system and removed any files have been crated on my system from two days ago since the problem happened.
    And then I used to go about the article in this page and did like this:
    http://answers.yahoo.com/question/index?qid=20080910101846AAazxN5
    but still I don’t know any thing about the problem.
    I can do so many things to fix but I am just curios if that is a virus why it just cut the speed when I am using the browser.
    Please if any one found the reason send me your information I like to know it will improve my knowledge however my problem is solved fro now.

  • Custom colors in FrameMaker 10 not being maintained when printing PDF using Distiller/Professional X

    Hello all,
    I am working my first tech writing job that requires printed material instead of just PDFs, and I am having problems with the logo colors when it comes to printing them.
    I created the two color definitions in FrameMaker 10 (using colors Pantone 485 CVC and Pantone 281 CVC). These colors are used for diagram callouts and doc titles.
    I recently upgraded to Distiller X and Acrobat Professional X, thinking that maybe the older versions just didn't support those colors, and I am still getting the same result. Instead of printing the colors I added, the PDF is printed with the default red and blue. FrameMaker is using the CMYK model.
    I have a feeling that I just need to adjust some settings, but I don't know whether to adjust Distiller, Acrobat, or FrameMaker. Anyone else have issues when trying to use their company's colors? Any ideas on what might work?
    Thanks in advance,
    Smitty

    John,
    I'm not even sure what printer we use since we send the PDFs out to be printed on a glossy paper (I'm new to the position so I don't have all the details yet). All I use is my Adobe PDF printer. I'm also not using FileMaker, I'm using FrameMaker since I am producing manuals that will be printed, not marketing material or anything with a lot of images. I am just trying to get the logo colors to appear correctly in the PDF so that when it does get printed off-site, the Pantone colors are seen and not the default in the final product. I will post this in the FrameMaker forum as well.
    Thanks for your response.
    Smitty

  • When to use Resource Plans - best practice?

    when would a Resource plan best be used instead of simply building a team within a project file with generic resources?  
    thanks
    Steve

    Hi Steve,
    The resource plan is meant to be used in an early planning phase before starting scheduling the project phases. The resource plan allows you entering the workload planned by resource skills by time period. It could also be by named resources if they are
    already identified in this early phase (but usually they are not). The resource plan is really useful when you start using Project from the business case before the project even really started. Doing so, you'll be able to perform portfolio analysis and scenario
    and manage your pipeline of projects based on the capacity available.
    Then as soon as you are able to create a more detailed plan, you switch to MS Project were you can assign resources (generic and/or named) to phases/tasks. Note that you have a parameter in the resource plan which trigger how the capacity is calculated:
    from the resource plan: in the early phase when you just have a resource plan,
    from the project plan: when all your workload is transcrribed in the project plan and the resource plan is either empty or redundant,
    from the project plan until : when the project plan contains the workload until a certain date; after this date, the resource are not yet identified and Project takes the workload from the resource plan to calculate the capacity.
    Hope this helps,
    Guillaume Rouyre, MBA, MVP, P-Seller |

  • HT4528 Is it possible to buy an iphone for yourself at the apple store when you're using an upgrade from a different phone number on your plan?

    I broke my old phone a few days ago, and my phone number doesn't have an upgrade until the summer of next year. My dad offered me his upgrade, since he doesn't need a new phone and it would save me a few hundred dollars. Is it possible for me to go into the Apple store and purchase a new iPhone when I'm using an upgrade from a different phone number? I already cleared it over with the people at Verizon, who told me I could switch the upgrade over online.

    There are 2 issues here.
    Some carriers REQUIRE a data plan in order to use an iPhone on their network. This requirement will vary from carrier to carrier. The iPhone is designed to be constantly connected. If you do not manually go in and turn off cellular data (not just 3G) The phone will attempt to connect to the Internet over the cellular data network. If you have your carrier specifically block these requests, you shouldn't be charged for them. If not, it could end up costing you lots of money you didn't expect. The other thing that will happen is things like visual voicemail will not work (if the carrier supports it to begin with) and you will get lots of messages about not being able to connect to cellular data if you're not in range of WiFi you can connect to. MMS messaging also will not work.
    The second issue surrounds the statement: "use the iphone 4 with a standard cdma phone plan".
    It is NOT possible to purchase an unlocked CDMA iPhone. ALL CDMA iPhones are locked to Verizon.

  • HT5569 When my daughter uses her i-phone on our wirless network at home does it use data from our data plan when she plays games or aps from her phone?

    When my daughter uses her I-phn on our home wirless network does it still use data from our data plan? Thanks.

    No. As long as she's connected to WiFi, no cellular data is being used.

  • How do you move an iphone from one mac to a new mac when both are using Itunes Match

    I have an Imac (Mountain Lion) with two users sharing an Itunes account (Ver 11).  We each have iphones syncing to the computer (and to icloud separatly). I have just activated Itunes match on the IMac and on both phones.  I just bought a new MacBookPro and have activated Itunes match on it so I am sharing Itunes. Now, I want to move one of the iphones to the new MacBook and have it backing up to that computer instead of the Imac.  How should I proceed with synching the phone with the new computer?  How about the photos on the iphone?  Will they just load into the iphoto library on my new MacBook Pro. 
    Also, can I still synch the phones manually and move over playlist from Itunes to the phone?  I am assuming that when you turn off itunes match on the phone those playlists will be active.  I want to make sure that say, when I am on a plane or have no wifi or cell, that I can still use the phone as an Ipod.  With Itunes match you are streaming and always need a signal.  There has to be a way to retain the simple music player functionality, right?  

    There's too much above for me to specifically answer your questions, but I'll assume from the title that you're basically trying to sync to a new computer.  So here are some articles to help you.
    iOS: How to transfer or sync content to your computer
    iTunes: How to move your music to a new computer

  • Using patch plans for 12.1.0.2 target oracle home fails with 'PREREQ_MESG: Unable to get the version of OPatch'

    We are attempting to use patch plan to apply PSU and one-offs to a new 12.1.0.2 database oracle home.  Our EM version is 12.1.0.4.
    We are experiencing the same issue described in ''Bug 20271609 : Unable to get the version of OPatch".   This bug is closed as 'duplicate bug to filer' but we do not appear to have visibility into what patch/bug fixes the issue.
    Description from the above mentioned bug is our same issue.  We do not have this issue when we use patch plans against an 11.2.x oracle_home target.  It is unique to 12.1.0.2 oracle_home target.
    Description from the bug:
    The Plan failed in step "Run Prerequisite Checks" with the following errors:
    PREREQ_NAME: Minimum Version of OPatch
    PREREQ_DESC: Check if the required version of OPatch is present on the target
    PREREQ_TYPE: PATCH_TOOL_CHECK
    PREREQ_STATUS: FAILED
    PREREQ_MESG: Unable to get the version of OPatch at
    /u01/app/oracle/product/12.1.0/dbhome_2/Opatch
    We have opened an SR to see if we can get more info on what was already identified as a bug.  Has anyone else experienced this issue?  If so, can you share any patches or workarounds (other than manually applying patches) that you found useful?
    Thanks.

    You'll probably get the same info from Support, but the workaround is to use the Patch Database (however that doesn't work if there's no DB target associated to that home).   If you were trying to do patchign out of place (clone home, patch, then move db's), EM can do this for you.   If you're just installing a new DB Home and trying to patch, then i don' think there's another workaround.  The base bug is marked fixed though, so a backport for the 12.1.0.6 plugin should be available very soon.  I would ask the support analyst to request the backport for your plugin/patch level...

  • IPhone using extremely high amounts of data when not in use

    I have a 4S on AT&T and am grandfathered in w/ the unlimited data plan. Last month I got the notification that I was in the top 5% of data users (which sounds crazy to me considering what some other people I've read about seem to use). According to AT&T's site I had used 2.09 GB with 16 days left in my billing cycle.
    Once I got that notification I logged on to see if I could find out when I was using such large amounts of data. It turns out between midnight and 1 am almost every night there was large amounts of data sent. I think this is strange since for two reasons, 1) I'm on WiFi at home in my apartment and 2) I wasn't even awake at the times these charges occurred.
    Example: January 6, 2012 at 12:40 am I was charged for 417,327kb, roughly 417MB.
    Similar data usage occurred almost every night going back to 12/28/11. On 12/29 I was charged for 468MB at 12:21am. Very unlikely this was actually data I used since I had work the next day and wasn't awake. It honestly looks like 80-85% of my data usage is coming from these occurrences. It also isn't likely that this is a total of data used throughout the day as there are other entries of smaller amounts spread out throughout the day.
    Now, if I was on a truly unlimited plan and there was no such thing as throttling I really wouldn't care about this. But the fact is that my 3G speeds are being throttled (just ran speed test at a location I used to get over 1Mbps and I am was at .07 Mbps). I have spoken to AT&T and they insisted it was an issue w/ my phone, either the hardware or the OS. So I went to apple and the "Genius" did a DFU restore for me in store and told me that would fix it. It hasn't and now I'm stuck with this constantly happening and unbearably slow 3G data speeds for the rest of the month.
    That was my last billing cycle where I was throttled down to download speeds of .07mbps. Unusable. This month I decided to closely monitor my data usage. I turned off iCloud and photostream, and turn off data whenever I'm using wifi. I turned off the sending info to apple setting.
    I checked my account on ATT.com today and noticed that yesterday morning at 7:58 am while driving to work I somehow used 247 MB. Don't ask me how, I'm not steaming anything and my phone is either locked or playing music from the iPod app. I could probably stream Netflix for 5 hours and not use that much data.
    I called AT&T to let them know (AGAIN) and got bumped up to a "Data manager" who was incredibly b*tchy and rude. She said there must be some app that's using that much data to update. I don't have any apps that are even that size so I don't see how this could possibly be the case. I tried to talk with her about how that can't really be the case and she just kept repeating that there must be some app using the data blah blah. I've gone to apple with this last month after failing with AT&T and at first they did a DFU restore and we restored the phone as new, then it kept happening so I went back they replaced my phone. AT&T said it must be a hardware or software issue last month, but this month it must be an app that's doing this. I can't get a straight answer from them and they just keep passing the ball to say it's Apple's problem.
    I really don't know what to do. I'm grandfathered in on the unlimited plan and don't really want to change that. Say I change my plan to the 3GB's at the same $30/month. What's to say this won't keep happening and I'll be over that 3GB's in 10 days then get charged an extra $10 for each additional GB?!
    I can't think of any apps I've downloaded in the past few months that would result in this change and I can't live with another 2/3 of my billing cycle being throttled down to unusable speeds.
    Has anybody else had anything similar happen? I have no idea what to do next (and sorry for the long rant but I'm fresh off the phone with AT&T and I'm ******)

    Thanks for the link. I only went through the last three pages and unfortunately it looks like there is no solution. I turn data off every night and turn it on only when I'm not in a wifi area. It seems that as soon as I turn it on, within an hour it charges me data for a backlog of whatever it didn't do when it was connected to wifi.
    I think it's absolutely disgusting that AT&T can just dismiss this and act like it's the users fault. Apps and email updating in the middle of the night to the tune of 400MB? I highly doubt it and then when I called to ask them about it they try to make me sound stupid like I have an app or two open. Just really ticked me off. The worst part about it is that there doesn't appear to be anything I can do about it aside from never using my data.

  • Use of planning file entries

    hi pp gurus
    can any one explain me what is the use of planning file entries
    one moree problem when i converting existing planning file entries
    into new file entries. system gives the resullt converted planning file entries-0
    so why it is happening
    regards
    Balu

    Hello Balu,
    System creates planning file entries automatically when the change take place for the materials if there is no change then there will no creation of planning file entry.
    If you are running the background the also above logic will apply. Do some changes in stock or in material master then check the planning file entries.
    Background job is recommend to run if sometimes systems will not create planning file enty eventhough there was a change. Otherwise there will be no creation of planning file entry if no change.
    Please rewards your points if helpful
    Regards
    TAJUDDIN

  • Use of Planning File Entry

    Hi,
      what is the use of planning file entry and when it will be generated?
    - Ram.

    Hi Ram,
    Planning file extry will be created or executed by system to
    the objects (location products) which undergo planning run.
    ie Whenever a location product undergoes demand or supply
    relevant changes, during planning run for system to plan, a
    planning file entry will be marked by system which will be
    used as basis for planning.
    This will be used in cases where network heuristics kind of
    runs will be executed
    Regards
    R. Senthil Mareeswaran.

  • Using explain plan

    Hi,
    I am quite new to use explain plan in oracle.
    I want to know what are the important factors that we should emphasize to optimize a SQL query.
    Thanks in Advance,
    Dilip

    If I had to identify key SQL tuning factors to look for in relation to an explain plan I would say that number one is to verify that the plan is driving on the right tables in the proper order.
    Second looking at the SQL make sure it is not written in such a manner as to disable the use of available indexes such as when a trunc is done on an indexed date column so it can be compared equal to another date when a >= date value of midnight and < midnight of first day not desired could be used instead enabling use of the index on the date column by the optimizer. Implicit conversions of join column data types can also disable use of an index.
    Third, if the CBO is doing something other than what you expected do not just assume it is wrong. Try to figure out why it is doing what it is doing and then try to determine if it is right or wrong. I have caught people trying to tune SQL because they knew the plan was wrong, but did not actually test it before spending a lot of time to develop a different path that ran slower than the optimzer plan.
    HTH -- Mark D Powell --

Maybe you are looking for