When does DAU run assuming normal startup 24 hours later?
Since DAU in ZCM is hard-coded to once every 24/hours, when exactly does it run?
Meaning like:
Let's say some time on Monday, it ran on my pc
On tuesday, pc was OFF
On Wed, I come in and power on PC and login.
When does the DAU run? Does it base it upon the device refresh schedule in the Zone? So if I have things the DEFAULT, it would be some random time AFTER 300-600 seconds AFTER I power up the PC?
Or is it even more random and it's some random time when the PC is on?
Kevin,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/
Similar Messages
-
Strange issue encountered when doing costing run
Dear experts,
I encountered a strange problem when doing costign run use CK40N.
I created a costing run on 23.12.2010 In the costing run the validity was set from 01.01.2011 to 31.12.2011, I did all the steps except release, all steps were done successfully
I released costing run on 01.01.2011, but when I hit a material to check the costing date, found the costing was only avaliable to 31.01.2011 not 31.12.2011.
I was wondering if any actions or modifications done will affact on the costing date of material?
Have you ever meet this problems?
Please give me some help.
Thanks for your time and concern.
Regards,
AnnaHi Sarada & ajay
Thanks for your comment.
The most strange thing is...
When I display costing run, the valid to date is 31.12.2011, but in material, it shows 31.01.2011....
I did test again, to change the valid to date in CK40N of the costing run, but the result is, date in material alway the same with what displayed in costing run in T-code CK40N.
One more information, we usually do costing run per month, and we just change to valid date to end of year from 2011.
At first I thought it might have some relation with modifications to costing variant, but after doing test, the modifications will not affect.
The valid date in material should always be the same with what displayed in costing run.
And after the first step 'Selection' in costing run, the date will not be changed.
So I could not come out with any idea with issue...... -
Exception : SubjectManager not installed when doing Security.runAs()
Hi
I am getting an exception : Subjectmanager not installed while running Security.runAs(new Subject , .....
The problem occurs onley when there is only wlclient.jar in the classpath .
Anyone knows the solution
I don't want to add weblogic.jar in the classpath .Sachin Shukla <> writes:
Initialization of the client jar is a hairy dance. It generally
happens implicitly when an ORB is created. This sounds like a use-case
we missed. If you create your initial context first it should probably
resolve itself.
andy
I am getting the exception "SubjectManager not installed" when calling Security.runAs with thin client jar. This is the first statement on entering main(). This error doesnt occur when using weblogic.jar.
I was doing this because the principal and credentials set on main thread, for JNDI authentication were getting passed to all the child threads. To evade this, I thought of calling the following code in every new thread - Security.runAs(new Subject(), new PriviledgedAction(){
public Object run(){
//do stuff
Thanks in advance
Sachin -
My ipod touch has been stalling in different stages of the syncing process and when it finally stops hours later, it only syncs some of the songs and playlists I've checked. This is well within the memory storage. To be honest, this thing has been a problem since all the updates a year ago. I've been using my ipod classic, but I would like to use this one because of the blue tooth capabilities. This is very frustrating.
Try here. Do not forget the Additional Information topic.
-
Why does Firefox run auto on startup?
I want a browser which can be screend only when I choose to use it. When it runs on startup, it is almost full screen, and gets in the road of email work etc.
Boot the computer in Windows Safe Mode with network support (press F8 on the boot screen) as a test.
*http://www.bleepingcomputer.com/tutorials/how-to-start-windows-in-safe-mode/
You can use the MSConfig program or the Autoruns utility to see which software and services are getting started (be cautious with disabling services).
*http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx
It is possible that a program tries to open the default browser, so you can try to set another browser as the default browser to see if that has effect.
Do a malware check with several malware scanning programs on the Windows computer.
Please scan with all programs because each program detects different malware.
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware:<br>http://www.malwarebytes.org/mbam.php
*AdwCleaner:<br>http://www.bleepingcomputer.com/download/adwcleaner/<br>http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware:<br>http://www.superantispyware.com/
*Microsoft Safety Scanner:<br>http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender:<br>http://windows.microsoft.com/en-us/windows/using-defender
*Spybot Search & Destroy:<br>http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan:<br>http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller:<br>http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
*https://support.mozilla.org/kb/troubleshoot-firefox-issues-caused-malware -
Firefox does not run as normal user
I installed firefox but it won't run unless I su. This is obviously a problem for me, and just about anyone. I tried deleting the .mozilla-firefox folder. I also tried reinstalling it. Nothing I tried has worked.
Ack, there is something wrong with mozilla in arch. I had the same results on several machines and installations. Some files, at least one would be enough, is placed in the wrong place, I guess (considered to be placed in ~/.mozilla, but is in /opt/mozilla/ f.e.), and is set to be root's when you run mozilla for the first time as root. I never took the time to explore it, but I believe to remember I solved this, back yonks, twice by recursive changing permissions of the whole mozilla trees. Would be worth to give it a closer look... Anyway, since then I never touched mozilla based browsers as su, if in need to do such things I use 'links'. Furthermore, if you tweak your users permissions, there is no need to run a gui browser as root (*), as far as I am concerned. Give sticky permission for a "staff" group to write to /usr/src/incoming, f.e, and add your account to the group, will give you what you need to fetch sources as a user, and compile them as root in place. For whatever you will have to fetch, there will be a solution using aglp, acl, what ever you use and name it.
(*) Exception:
I found out epiphany frequently locks up fetching http://www.archlinux.org if you are a user, but not if you are root. Funny, isn't it? -
Error message that no virtual memory pops up & crashes when application is run for more than 1 hour
My application uses VISA serial operations. It has arrays to store data collected from various devices. I reinitialise the arrays each time the index reaches 50.
Data acquisitions is carried out in separate threads by invoking the runVI method.
When i run the application on Win XP continuaously for more than 1 hour it gives an error message that no more virtual memory to complete the task and the system hangs up.
I open the serial port only once and close it when the application is terminated. But serial read/write operations are done continuaously
Is the error caused due to memory leakage? How can i solve the problem. It's very urgent and i shall be thankful if i ge
t the help.Yes, it sounds like a memory leakage (either that or you're trying to run an advanced app on an old computer w/ little memory and a small hard drive).
Things to try:
1. Ensure it's only labview, and not say labview and another application interacting. This isn't a likely case, but you never know what people have on their boxes and I've seen some weird things with virus scanners. Hit Ctrl-Shift-Esc to get the task manager. Go to processes and watch the memory consumption (click Memory twice to sort in descending order) of the various processes. If labview keeps rising, you've got a leak.
2. If only a reasonable amount of memory is being used, double check your page file settings (read virtual memory).
From the Control Panel
Select System
Select
Advanced Tab
Under Performance, select the Settings button
Select Advanced Tab
Under Virtual Memory, let windows dynamically adjust the page file (and any XP speed tweakers out there can now chime in about how wrong this is. This essentially allows windows to keep upping the virtual memory as needed by various processes.
3. Find the leak. In LV Tools->Advanced->Profile VIs. Turn on memory stats. Start the profiler. Start your vi. If the vi crashes labview totally, you'll have to keep hitting snapshot to find the leaky vi (the one that's memory keeps growing).
4. Upload the vi to the forum so we can give it a looksee.
G'luck
2006 Ultimate LabVIEW G-eek. -
I can't seem to get all my songs and playlists that are checked to sync to my ipod touch. The ipod has been troublesome since the first round of updates. It was originally set on "itunes match", but it was dropping songs for some reason and since the wifi only operates when I'm in a place where wifi is available, I can't download the songs again while I'm on the road. I turned off itunes match and plugged it in to my computer to sync it that way, and it keeps stalling in different stages of the sync process. After hours and hours of being stuck, it "completes" without syncing any of my playlists that I checked.
Try a low level reformat of the iPod's hard drive to possibly try and repair some of its damage. Use the instructions in this article to walk you through the process.
http://www.methodshop.com/gadgets/ipodsupport/erase/
B-rock -
.
You should be able to re-download it for free (assuming that it's still available and you use the same iTunes account that you originally used) : http://support.apple.com/kb/HT2519
-
Create a file if it does not exist when a script runs
I have a shell script I run using automator that puts on the clipboard a string like Page 001, Page 002 and so forth incrementing the number 00x everytime it runs. I use it when I need to sequentially name files when doing things like scanning documents and so forth.
Presently, I have to manually create a file "~/counter" and enter the integer to start counting from. So if ~/counter contains 0, pbcopy places "Page 001" on the clipboard and so forth
The shell script
<pre class="jive-pre">
#!/usr/bin/env bash
myvar=$(cat ~/counter);
let myvar=$myvar+1;
mycopy=$(printf "Page %03d" $myvar);
echo "$mycopy" | pbcopy;
echo "$myvar" > ~/counter;
</pre>
works fine now.
I want to modify the script so that if ~/counter does not exist, the script creates a file and initializes an integer value say 1 in the file. If the file exists, the script uses the integer used in the file.
How can I get this done?And because I can not leave "Well Enough Alone"
#!/usr/bin/env bash
count=0
[[ -r ~/counter ]] && read count anyjunk_aftercount <~/counter
count=$((count+1))
echo "$count" >~/counter
printf "Page %03d" $count | pbcopy
The anyjunk_aftercount is just in case something else gets into ~/counter. Assuming the first non-blank field on line 1 is the count, then anything following the count will be stuffed into anyjunk_aftercount and since the script ignores it, it will go away when the script re-writes ~/counter with just $count -
Weblogic Startup Class does not run as Windows Service
If you know the answer, plase send me an email at [email protected]
I'm running a weblogic startup class that starts a Thread. I need to
run a batch program that should be running as long as WebLogic is
running (to process new orders).
It works fine when I run WebLogic (5.1 SP8) from a script, but causes
problem when I'm running it as a Windows Service. It calls the
startup class, however, the startup class never spawns the Thread
class.
Following is excerpts from different components:
=============================================================
*** weblogic.properties ***
weblogic.system.startupClass.pdfCreatorStart=WebLogicStartupPdfCreator
*** WebLogicStartupPdfCreator.java ***
public class WebLogicStartupPdfCreator implements T3StartupDef {
public String startup(String name, Hashtable args) throws
Exception {
Thread t = new ProductionPdfBatchRunner();
t.start();
return "success";
*** ProductionPdfBatchRunner.java ***
public class ProductionPdfBatchRunner extends Thread {
public void run() {
try {
//work being done here
this.sleep(30000);
catch (InterruptedException ie) {
catch(Exception e) {
e.printStackTrace();
=============================================================
Thanks for any helpHi,
Ok. Few suggestions.
1. Can you review the SAP note:
552286 Troubleshooting for the SAP Web Dispatcher
2. When you said: "web dispatcher does not get started ", what error you got ? Can you be more details here ?
3. Please check the trace file dev_webdisp" that generated in the work directory. If the log entries is not abvious, increase the trace level to 2 or 3, and reproduce and re-check the trace file.
4. What is the output of the command "sapwebdisp -v"
5. How about sapwebdisp.pfl ? Are those settings correct ?
Hope this helps.
Regards,
Vincent -
AutoPlay does not run when inserting disk
System: dv7-1285dx
Vista Home Premium 64 bit SP1
When inserting a disk into the dvd drive AutoPlay does not run.
The information on the disk can be accessed through windows explorer by right clicking on the drive letter and choosing
open. The contents of the disk are displayed and can be accessed but windows does not recognise whether the disk
is video or data.
AutoPlay does not run from Windows Explorer.
In control panel > autoplay the "Use AutoPlay for all media and devices" is checked, all media have options other than
"take no action".
The driver for the DVD player has been unistalled and reinstalled with no effect.
Disks burned with the drive behave normally on other computers.
AutoPlay runs properly for any device plugged into a USB port.
Any ideas of what to try next?
Thanks
BoHi,
Please check the following steps:
http://windows.microsoft.com/en-AU/windows-vista/Troubleshoot-AutoPlay-problems
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
I am new to Adobe Cloud, received the invitation from Adobe, create my account and I am able to login to the web. When Attempted to download Photoshop desktop, I was asked for Name and Password, the name was populated but I have to enter the password. I am using the password I entered at registration but it does not work and the Installer does not run.
I have a MacBook Pro with OS version 10.9.3.
Thanks,
CarlosI figured out, the Installer need the username and password for the computer OS.
-
My Firefox version is 13.0.1, I use Windows Seven 64-bit, when I click on Firefox, but the program does not run! But Firefox is seen in the list of Windows processes, while Firefox does not run.
I manually deleted Firefox from the list once I have Windows processing.
And when I clicked on Firefox, Firefox will open quickly and easily.
Firefox process in Windows Processes names list called "firefox.exe * 32" is.
Please try to solve my problem, my problem is how to solve?Hi, are you saying that you start Firefox and it stalls -- you can see it in the Task Manager but it never displays -- but if you kill that process and start Firefox again it starts up properly that second time?
If you look at the statistics available in the Task Manager's processes tab such as bytes read or other bytes, can you see whether Firefox is doing anything at all? ''Note: You might need to add columns if your Processes tab isn't set up to display statistics. You can do that from the View menu.''
You might already have seen these troubleshooting articles. If not, does anything here help:
* [[Firefox won't start - find solutions]]
* [[Firefox hangs or is not responding - How to fix]] -
Can someone please help. I have a really old MacBook that is running really slow. I want to wipe everything and reinstall the latest software but don't know how to do this. Also is there a way of keeping Microsoft Office when doing this? Thanks in advance
You do realise that wiping the disk means that everything on the disk is erased. Everything. Photos, music, emails, ...
So the first piece of advice is to make sure you have a back up of everything.
You need the OS disk to reintsall the operating system. You will use that disk first to erase the drive, then to reinstall the OS.
Here's the link for the US. http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
As for MS Office, you will need the original disk that it came on to reinstall it.
Maybe you are looking for
-
DNS Name in OD Password Server field?
So, I got a new juniper firewall the other day to reduce the amount of work my main server has. Fire it up, configure it, and I notice that password server requests are going out the NAT, then back into the public IP of the server. My question is thi
-
I want to add my apps from my iphone to my mac but they wont open
i am a new mac user and fumbling around trying to sort things out......i cant download apps to the mac for some reason? The ones l have in itunes and on my iphone l move folder to finder/all files but they wont open. If l move them to the desktop t
-
My overall speakers work but when I plug them into my iPod, there is no sound
How do you fix this?
-
App won't unzip file even though touch shows enough space
An easy one, I hope. My Reading Ally audiobook app won't unzip a 383mb file even though my touch shows more than 2 gb of space available. The app presents a message saying not enough space available. Any help appreciated.
-
Hi, I'm using a iPad since 8 months, no problem till few days ago, when a experience a battery charge problem: with several USB cable e 3 different charger the iPad don't charge at all. I have tried the charge and sync from my Mac, same situation: no