When does iPhone Mail check my Mail?!?!

It doesn't say how often it will check for mail!!! Please help!?

The setting is still there, it's just moved a little bit.
I'm working with a German user interface so I'm not sure about the English translations, but here it goes:
In the general settings there is a new item in the uppermost area. It should be something like "load new data".
Once you go in there you can activate or deactivate "immediately".
Down below you find the settings for all the applications that do not support immediate transfer – you can set it to 15 min, 30 min, hourly or manually, just like under software 1.4.
I think the Mail goes by these settings, at least it works for me.

Similar Messages

  • When I go to check my mail on iPad it says it can't connect to the server?

    Since yesterday afternoon I turned on my iPad and went to check my mail; it says it can't get mail the connection to the server failed. However, I can get online, check site that I usually check, use Facebook and Twitter, and mail downloads into my mail ... any ideas?

    I just checked my email accounts with this computer.  All of the are working and able to be accessed.  I did change my password yesterday and when I signed in on the computer this morning it said something about clearing my preferences and marked sites associated with the email address.   If that is the problem, how do I fix it; I have updated my email information on my iPhone and iPad and the iPhone has no problem

  • Make Mail check for Mail every minute?

    I recently got an iPhone 3G to replace my original iPhone, on my original I had the setting for mail to check for mail every minute, now mine is set on manual, but I can't find the setting to change it. Someone please help me, thank you.

    Push. That is what push is. It means that changes are sent as they happen.
    "Email accounts that use the push method for message retrieval enable you to have email messages delivered directly to you as soon as the message is received by your email provider instead of checking periodically or manually for new messages. On iPhone or iPod touch, push email is supported for the following email account types:
    MobileMe
    Microsoft Exchange
    Yahoo!
    Other email accounts such as POP, IMAP, AOL or Gmail accounts do not support push message retrieval on iPhone or iPod touch but can instead be setup to fetch mail at specified intervals or manually when the Mail application is opened."
    http://support.apple.com/kb/HT2625

  • Itunes freeze when doing iphone backup

    When trying to sync my iphone, itunes froze at the back up stage and I was unable to complete the backup or sync process. I was unable to close itunes and I had to unplug the iphone and turn off the computer. WHen trying again the next day, the same thing happened. I later found that all my music had been wiped from my iphone. Luckily contacts and diary are still there. I've done virus checks on my computer and it seems to be ok. Any suggestions?

    heyy i had the same problem and got it resolved my interference came from my antivirus i am with bullguard i got on chat with tech support they helped me upgrade to latest version and viola syncing is fixed worth a try eh?

  • Message no. AG021 when doing component availabilty check,

    Hi PP Gurus,
    When I'm trying to do Availability check for Planned order (order type PE) getting an error 'No control data maintained for checking group 02 and checking rule' (Message no. AG021) though Availability checking control for order type PP01 with Checking Rule PP configured, Standard production order PP01 without settlement profile but Production Scheduling profile not created. Since I'm using REM environment.
    Is all the settings required that we do for Discrete for REM too as I'm using Rate Routing here.
    Please come back with solution.
    Thanks & Regards,
    Abu Arbab

    Abu Arbab,
    As you are trying the availability check at planned order level check what is the checking rule maintained at Plant level (T-Code: OPPQ under Dep. reqmt availabiity) and Plant and MRP group level (T-Code OPPR under "Check rule dep.reqmt).
    Then in OPJJ make sure you have maintained the scope of check for 02 and availability checking rule.Also make sure that you have the right availability rule maintained in material master MRP view for that material-plant combination.
    you might have to re-create the planned order for the changes to take effect (if you change the scope of check).
    Also check out the OSS NOTE: 92316 - Availability check: error message AG021
    Try and revert back.
    Regards,
    Swapnil

  • When does iPhone 5 come to Africa and the middle east?

    So iPhone has come out today in the UK shops. I have no idea when it's going to be out in the middle east. Can I please get any information on that topic?

    When Apple announces availability.

  • Issue with sales order when doing the availability check.

    In MD04 we have a material avail date of 12.05.2011.    The order was then changed to 13.05.2011 delivery date to reflect this availability,  but then delivery time was added e.g GI time and route time which then showed the sales order in MD04 as 18.05.2011.    However,  if we run the availability and take the 18.05.2011  and key this in the delivery date,  it shows in MD04 as 13.05.2011.  It seems like the availability check is only looking backwards,  and I can't find a setting in ATP relating to this.  In MM they have foward and back consumption in days on MRP3.  Do these fields impact this.
    regards
    Kylie

    Check in OVLY what is maintained to your sale order type
    thanks
    G. Lakshmipathi

  • When does iPhone 6 come out?

    I want to upgrade from my iPhone 4s, but I don't know if I should wait for iPhone 6 or uprade to iPhone 5s already?

    Sorry, no one here would know that, and speculation if not permitted here.

  • Spell checking in mail

    When I run spell check in mail, I do not get suggestions unless i hit the ["apple" :] - is there any way to get it to automatically give me correct spelling suggestions?

    I just highlight the word , right click, and the drop down gives the top 3 suggestions.
    Works for me anyway!

  • IPhone 2.0 Outgoing Mail Server changes

    It appears that the outgoing mail server settings in 2.0 are trying to alleviate the problems of switching between your ISP and AT&T (i.e. WIFI to Edge/3G) so that our non compatible email accounts will work in both environments for outgoing mail. Has anyone seen a thread or Apple article that addresses this area of the new software as I would like to understand it better? Seems that my attempts to set up multiple outgoing servers has caused my mail program to get stuck in sending emails. Thanks!

    The only way I was able to get my iPhone to check for mail automatically and actually download it was to delete the accounts and re-enter them. After they were re-entered, Mail worked automatically on my ISP mail account as it did before I updated, Push works on my .MAc account, and all my old messages appeared as well (i.e., deleting the accounts did not remove the messages I had stored).

  • Start Test - HD DST passes and so does all else. But HDD when doing a straight HDD check says fail

    Laptop slid off lap on to floor while on Skype. Skype continued to work. Shut off computer and later tried to turn back on. System said their might have been a power interruption or a change in software. Recommended checking system vs start normally. I take the first option, it loads files, the Microsoft Windows logo comes up, a Microsoft load bar comes up then the screen goes to a "grey" colour that is somewhat sculptured in appearance - not a blank blue screen.
    If I try to start normally, it reverts back to the former.
    I shut off the computer and hit ESC and try some of the stated "F" functions. In the Start up screen, everything passes including the HDD Sort Disk DST.
    In the Run In Mode, everything passes and seems to stay at 99% for sometime.... perhaps it was still running and I commuted it.
    When doing a HDD check - Failure
    Anyone with ideas??? I hope I dont have to replace the HDD.

    You might first check the connection of the hard drive to be sure it didn't get jostled loose in the fall. If it is secure and you continue to fail hdd check...replace it.
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • When I send a mail from my iPhone, it displays the mail server name to the receiver if the mail and does nog display my name or e mail address. This only since upgrading my iPhone5 to iOS7

    When I send a mail from my iPhone, it displays the mail server name to the receiver if the mail and does not display my name or e mail address. This only since upgrading my iPhone5 to iOS7. I've checked all settings etc. anyone have a solution please?

    Rectory wrote:
    Please can someone tell me how  I can change this so when I send a mail from my phone and from the IPad that it reads from me.
    You need a separate email address but you've already ruled out that solution.

  • I keep getting a white screen on my iPhone 5 when I check my mail

    Why do I keep getting a white screen on my iPhone 5 when I check my mail?

    This could be the result of a few different things.  A damaged LCD screen, corruption in the iPod's software, or a loose LCD ribbon cable.  If a restore of the iPod in iTunes does not take care of the issue, then the iPod likely needs to be serviced.
    B-rock

  • HT204053 does the icloud service work in middle east(lebanon) area or just in USA?coz it isn't working on my mac;it logs in,but when clicking any category like calendar,mail or find my iPhone,it tells"service unable to load,send a report..."

    does the icloud service work in middle east(lebanon) area or just in USA?coz it isn't working on my mac;it logs in,but when clicking any category like calendar,mail or find my iPhone,it tells"service unable to load,send a report..."..... so, the problem is..????

    Wow, just posting and it seems that there is a solution that is working for me...
    What I've did is I turned off iTunes Match on my iPhone, then turned in on again. Now in my iTunes library on my mac I can get the duplicates to be matched or uploaded to iCloud with a right-click, add to iCloud. iTunes Match starts to check the songs and everything is done correctly. Pretty nice!

  • I get "mail server does not recognize your Apple ID and password" when I try to share a picture via email in iPhoto.  My iCloud email works ok otherwise.  I have check all mail settings for ID and password.

    I get "mail server does not recognize your Apple ID and password" when I try to share a picture via email in iPhoto.  My iCloud email works ok otherwise.  I have checked all mail settings for ID and password.

    In the iPhoto preferences ==> accounts delete the account and re-enter it - sometimes that resolves this
    Or IMHO the best long term solution is to set Apple Mail as the iPhoto e-mail client in the iPhoto preferences and use it - it has a number of advatages and has fewer problems
    LN

Maybe you are looking for

  • Navigation Attribute is not getting displayed as in Masterdata Table

    Hi All, I have an infoobject "YDOCUMENT" compoundedd with "S_ORD_ITEM". Also i have added few attribute (Reason for rejection and Order Status) for the same. This infoobject is getting updated through data load from Sales Order Item level DSO and it

  • Problems with logitech headset

    Hey guys I was just playing Call of Duty 4 the other day, using my Logitech headset on Mountain Lion 10.8.3. But when I updated to 10.8.4 the sound from the game just completely stuffed up. The music is OK but all other sound is gone. The only other

  • Community:: somtimes it works fine and sometimes it shows error.

    User is being given read access to a community but still it shows the error message ::The page does not exist or user does not have access to it:: What exactly is happening is that for sometime it shows the community page and after a while it again s

  • List Months between a date range

    Hi, I'm trying to list the months between a given date range in an ABAP report to generate a MIS report(ALV).. Say I have 2 date ranges, 01.01.2006 to 01.04.2006.. I want to list Jan 2006 Feb 2006 Mar 2006 Apr 2006.. Any FM in SAP to get this OP..

  • How to save data from a server log to the java dictionary table?

    Hi, I need a java dictionary and a program which will read data from the log file and save records into tables. Can somebody help how to achieve this? Please help! Thanks & regards Amita