When does my music go into the hard drive?

When I download my music and send it to ITunes, it automatically goes into the hard drive? I had another hard drive installed just for the IPod. When does the music get saved into the hard drive? When I send it to ITunes or when I send to the IPod from ITunes?
Thanks

If you downloaded music from a music service, its automatically on your hard drive, you just need to point your music programs to the location of your music file.
If you've imported music to iTunes and have iTunes organize the files, iTunes will organize the files in the iTunes music folder.
If you installed a separate drive for music, then you need to point iTunes to the location of that drive. You do this by going to the preferences option and clicking on the advanced tab, there you can set the drive that iTunes will store and search for music.

Similar Messages

  • Can my macbook 4, 1 handle a 2tb hard drive if it fits into the hard drive bay?

    Can my macbook 4, 1 handle a 2tb hard drive if it fits into the hard drive bay?
    Does the hard drive brand matter as lon as the har drive fits in the slot?
    I want to put a 2tb hard drive in my macbook 4, 1 but I am not sure if the hard drive will work.
    Can my computer handle that big of a hard drive?

    "If it fits" will be the limiting factor. The largest capacity that I know of that will fit is 1.5 TB.
    OWC sold this 1 TB 12.5 mm WD hard disk a while ago that allegedly fit your MacBook4,1 so it stands to reason you won't be limited to a 9.5 mm dimension. The only 2 TB drives that I know of are 15 mm thick and will definitely not fit your MacBook. If and when you can find a 2 TB HDD in the required form factor it will work.

  • I had backed up my I-tunes files to an external hard drive but after my computer crashed when I try to reload from the hard drive the message comes up saying I-tunes library cannot be read because it was created by a newer version. Help please!

    I had backed up my I-tunes files to an external hard drive but after my computer crashed and I restored it when I try to reload from the hard drive the message comes up ""I-tunes files cannot be read because it was created by a newer version of I-tunes". Help Please

    Upgrade the version of itunes on the new computer
    Itunes.com for free download.
    Peace

  • My 12" powerbook logics card crashed. I have a 17". How do i retrieve my internet bookmarks from the 12" by putting it into Target mode on the 12" and looking into the hard drive on the 12"?

    My 12" powerbook logics card crashed. I have a 17". How do I retrieve my internet bookmarks from the 12" by putting it into Target mode on the 12" and looking into the hard drive on the 12"? Where on the 12" hard drive do I go to search for them?

    If the 12's logic board is trashed, I don't think you can get into FireWire Target Disk Mode. The computer has to start to get to FWTDM. Will it starte and run at all?
    If it won;t start, you will have to go inside and extract the hard drive. Then get this gadget:
    Newer Technology Universal Drive Adapter USB 3.0/2.0 - connects any 2.5", 3.5" or 5.25" drive
    It allows you to connect a bare drive to another computer that has USB. It will act just like an external disk drive. Assuming the 12's drive is not damaged due to the LB failure, you can retrieve files quickly.

  • Why does iTunes sort files on the hard drive differently to on the iPod?

    Hey guys! im using itunes 8.2 and my new iPod classic 120GB.
    I updated all my music in iTunes so that it is now perfectly organised on my iPod. The ipod appears to organise its artists using the "artist" field not the "album artist". because of this i decided to use "artist" like the album artist and "album artist" like the usual artist field so that i still had the names of some of the featuring artists etc (example: i have a song by Air featuring Beth Hirsh. normally this would have "artist" = Air feat. Beth Hirsh and "album artist" = Air. but as the ipod organises the other way around I swapped them over.) This all went fine and my iPod is perfect, as is the itunes library itself as i just sort by "artist" and it keeps everything as i like it.
    As I had managed to get that in order I thought I would then let iTunes organise the music on my hard drive. Frustratingly iTunes then decided to organise everything on the hard drive by "album artist"! which means i've got 2 folders for my Air album one under Air and one under Air feat. Beth Hirsh.
    Basically what im asking (after all that waffle) is 1) why is it different and 2) can i change it?
    if there is a way of changing it (which im sceptical of considering apple tend to tell you whats best and then have done with it, as they are more often than not right!) then im assuming there is more chance of changing itunes than the ipod.
    Any help will be much appreciated!
    thanks Andy

    The problem you've run across has been inherent in iTunes & iPod software for quite some time - I suspect they don't consider it an issue or it would have been addressed by now. See my previous post on Grouping Tracks Into Albums for suggested workarounds for this and other organisational issues, in particular the topic One album, too many covers.
    tt2

  • Stuck at gray screen. Does OS X install wipe the hard drive?

    Im stuck at the gray apple screen when I start up. Already reset the PRAM with no luck and couldn't boot up in safe mode. Have the install disk but want to know if it'll wipe the hard drive before I do that. Please assist.

    Hey, Running.
    I hate to say it, but things don't look very bright here. It looks as though your HDD is in the midst of failure (I/O error and exiting with SIG 8). If your machine is under warranty or APP coverage, you'd do very well to take it to a Genius Bar or authorized repair centre and have the machine checked. If you have a valid backup from which to restore, your second best option at this point is to put in a new hard disk and restore from Time Machine. If you don't have a backup and you're dealing with critical data that simply can't be lost, you'll want to contact a data recovery service. Alternatively, you might try using some recovery software such as Disk Warrior. I consider that a last resort.
    Sorry for the trouble!

  • Why Does iTunes Continuously Read From the Hard-drive?

    Hi. I have recently discovered an odd behaviour from iTunes: instead of reading an entire song from the harddrive and storing it in ram during playback, iTunes reads small chunks of data very frequently. For example, when playing a 128Kbps song the HD reads 68KB chunks approximately every 3 seconds, and when playing lossless WAVE files the HD is constantly reading at 200KB/s. I found this out by having iTunes open and playing music while having all other programs closed, and monitoring the disk activity from Activity Monitor (and I'm sure that it's iTunes that was reading from the HD because when the music was paused the HD was idle).
    So, my question is why would iTunes do this? This seems like an extremely inefficient use of the harddrive for several reasons:
    - Constantly reading small chunks from the HD uses much more power than reading large chunks infrequently because idle hard-drives use much less power than active hard-drives
    - This will slow down other applications that need to make heavy use of the HD because iTunes will be constantly interrupting anything else that is using the disk (this is especially true for Photoshop or any other program that uses lots of swapfile space)
    - It puts unnecessary wear on the HD heads
    - It is dangerous for laptops, which can easily get thrown around or bumped. Momentarily reading a large chunk of data and leaving the HD idle for the majority of the time will be much safer for the HD heads
    - Hard-drive-based portable music players read large chunks of data infrequently because it is well-known that this saves power and protects the HD in these devices.
    So... is there any reason that iTunes is exempt from these reasons??
    -Eric

    I too have wondered about this. You'd think with 1.5GB RAM that itunes would take 3MB of it and leave my drive alone for a few minutes. I don't really feel comfortable doing drive intensive activities such as file copying while itunes is running.

  • HT1449 After moving music and movies from my MacBook Air to an external hard drive, do I create a new iTunes music and media folder on my computer then add more music and movies, then will I be able to move the computer music/media to the hard drive musci

    I need to move the music and movies from my MacBook Air (original) to an external hard drive, after I do this, do I create a new music folder and media folder on my computer to load music/movies in via the dedicatd external drive and then would I be able to move the newly imported to the external drive which would be my main site of storage?

    No, do it all in one go and henceforth only use the library located on the external drive.
    iTunes: How to move [or copy] your music to a new computer [or another drive] - http://support.apple.com/kb/HT4527
    Quick answer if you let iTunes manage your music:  Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive.  Start iTunes with the option (shift on Windows) key held down and guide it to the new location of the library.

  • Error message when moving iTunes music folder to External Hard Drive

    I have followed the instructions in Apple support to move my iTunes music folder to an external hard drive. During the consolidate library step, only half of my music is transferred before I get the error message "Copying music failed. The disk could not be read from or written to."
    Has anyone gotten the same message, and what was your experience correcting the issue?
    15" Powerbook G4   Mac OS X (10.4.8)  

    In Windows, you go through File >> Library >> Organize Library. here you can choose to consolidate your library. this should do the job.. alternatively you could take a look at this blog..
    http://www.tuaw.com/2006/09/19/how-to-keep-your-itunes-library-on-an-external-ha rd-drive/
    Even though its step by step on mac you should be able to figure it out from there.
    Message was edited by: MuldVarp3N

  • Macbook pro won't boot and when I tried to back up the hard drive I got "disk utility can't repair this disk backup as many of your files as possible"

    My macbook pro froze and initially would not even recognize the power chord. Now it charges, but will not load up. I opened in in disk utility to try and back it up so that I could take it to apple to have it fixed but I got the message that said "disk utility can't repair this disk backup as many of your files as possible". How do I back up the files???

    Nichelle215,
    you can try the method described on this Apple page, in the “Instructions for backing up to an external hard disk via Disk Utility” section. (You can skip step 6, since you already know that your disk is irreparable.) Note, however, that this method is not guaranteed to work. Once you get your disk straightened out, you might consider purchasing an external hard disk for use as a Time Machine backup destination, so that a similar problem in the future won’t wipe out the only copy of your files.

  • Recovering Music After Wiping The Hard-Drive

    I just recently had to do a full system restore on my comp. All the songs I had bought from itunes was deleted in the process. I can access my purchase history though itunes and was wondering if there was anyway to get them back.

    This is why it is basic to maintain a backup.
    Use your backup to put them back on.
    If for some reason you have failed to maintain a backup (terrible idea), then you can transfer itunes purchases from an ipod:
    File>Transfer Purchases
    "PRODUCTS CAN ONLY BE DOWNLOADED ONCE; AFTER BEING DOWNLOADED, THEY CANNOT BE REPLACED IF LOST FOR ANY REASON. YOU SHALL BE RESPONSIBLE FOR BACKING UP YOUR OWN SYSTEM"
    http://www.apple.com/legal/itunes/us/terms.html

  • Mac-format to PC-format: How can I get my music off an external hard drive?

    I had a mac-formatted iPod for years, and all of my music is on an external hard drive that is hooked up to that computer. When I got a new iPod after mine was stolen, I had to get a PC-formatted iPod. How can I get my music off of the hard drive and onto my PC (and eventually my iPod)? I tried uploading the files into my iTunes account on the Mac, but they don't show up in my account on the PC. Most of the music are CDs that I copied onto my computer years ago, and had on my old iPod. Help!

    Your Firefox profile would have the data. You can find it at:
    *C:\Users\<Windows login/user name>\AppData\Roaming\Mozilla\Firefox\Profiles\<profile folder>
    **The file you want is called ''places.sqlite''
    You can copy that file if you want to restore your bookmarks to your current Firefox by going back to ''C:\Users\<Windows login/user name>\AppData\Roaming\Mozilla\Firefox\Profiles\<profile folder>'' and overwriting the current file. Keep in mind, doing this will erase your current bookmarks.

  • Your firmware can not be updated because the hard drive...SMC 1.3

    Hi all !
    I have a problem. I'm have a macbook pro Santa Rosa =
    Model Name: MacBook Pro
    Model Identifier: MacBookPro4,1
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2.4 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache: 3 MB
    Memory: 4 GB
    Bus Speed: 800 MHz
    Boot ROM Version: MBP41.00C1.B03
    SMC Version (system): 1.27f1
    This morning I saw the update for the SMC firmware (1.3).
    Before restarting, I have this error :
    http://img411.imageshack.us/img411/6606/26048579.jpg
    Your firmware can not be updated because the hard drive partition scheme may not be supported. You must be booted from a GUID partiton or RAID scheme.
    When I went into Disk Utility in order to check, here is what I have =
    Name : FUJITSU MHY2200BH Media
    Type : Disk
    Partition Map Scheme : GUID Partition Table
    Disk Identifier : disk0
    Media Name : FUJITSU MHY2200BH Media
    Media Type : Generic
    Connection Bus : Serial ATA 2
    Device Tree : /PCI0/SATA@1F,2/PRT0@0/PMP@0/@0:0
    Writable : Yes
    Ejectable : No
    Mac OS 9 Drivers Installed : No
    Location : Internal
    Total Capacity : 186.3 GB (200,049,647,616 Bytes)
    S.M.A.R.T. Status : Verified
    Disk Number : 0
    Partition Number : 0
    I thought Boot Camp could be involved becauseI know it's the only thing related to the EFI.
    I searched on internet, and Ifound nothing. There was a solution in order to reset the partition table, but the tool is no longer available. The link on on the application explains that I have to reformat my macbook pro. I find a bit weird to make this , I can't spend hours for backup / restore just because the SMC update does not work. have you any lead for me ?
    Thanks ,
    Razique

    Have you tried this:
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger, and 4.1 for Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

  • Mac book is  starting up funny. I have a flashing folder and question mark or just a grey screen. IT at university is backed up all week and said it's the hard drive! Ugh need help in class now will be calling ASAP! Help please.

    I get either a grey screen or a flashing folder question mark. IT at my university said it wouldn't be till after the weekend and than still a few days to get it fixed so she told me to try to back it up myself because that's the only sure fire way to ensure I get all my Info. So any hints or help? They did a hardware test and they think it's my hard drive. I did a r+command restart
    And it won't let me verify the disk.... Or download mountain lion.. Okay I know I sound clueless but can anyone help me?

    Question (?) Mark, Blinking Folder, or Gray Screen at Startup
    These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
    A flashing question mark appears when you start your Mac
    Mac OS X- Gray screen appears during startup
    In most cases the problems may be caused by:
    Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
    Boot drive's directory has been corrupted - Repair with Disk Utility.
    Critical system files are damaged or deleted - Reinstall OS X.
    The disk drive is physically non-functional - Replace the hard drive.
    Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD:
    Boot From The Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Reinstall Snow Leopard Without Erasing The drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.
    Reinstalling Lion/Mountain Lion Without Erasing The Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • Macintosh HD won't boot, but disk utility says "The volume Macintosh HD appears to be OK." How do I repair the hard drive?

    I have a MacBook that needs its internal hard drive's Macintosh HD partition repaired, as the boot screen freezes on startup.  I am running a separate, working mac OS from an external hard drive in order to run disk utility and repair the MacBook's internal OS.  The issue is, it has dismounted the internal Macintosh HD partition, and won't remount. And in addition to that, the Verify Disk option returns with, "The volume Macintosh HD appears to be OK." I've run Verify Disk and Repair Disk a few times, all with that same result.  And the internal OS still won't boot.
    I have attempted to make a disk image of the internal Macintosh HD partition and save it to my external hard drive so I can wipe the internal hard drive clean and restore the image, but I receive errors when trying to create the disk image, and when trying to erase the hard drive (I know, I should try to erase the hard drive when I haven't made an image. When I tried to erase the hard drive, the image wasn't done and I thought it was. I got an error for erase, and I got an error for making the disk image)  I have tried making a disk image multiple times and haven't been able to create one.
    There is also a boot camp partition on the internal hard drive which is of no importance as to whether it stays or is erased.

    Reinstall OS X without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

Maybe you are looking for

  • ITunes 7 cannot browse album covers on this computer error and crash

    Installed iTunes 7 yesterday, and now every time I try to go to certain pages in the iTunes store, such as movies or tv shows, I get an error saying "iTunes cannot browse album covers on this computer". Then iTunes immediately crashes. Has anyone els

  • Problem with printing-- logo comes upside down

    Hi , We have some problem with printing. While testing the print output for billing we are experiencing some problems. Every thing  in the layout looks fine in the print preview but when i take a print out in my local printer , i see the client logo

  • Billing document net value issue

    hello friends, how can i change the net value of the billing document(vf01) with the inter-company  discount value.i have changes the standard sap program  but the net value is only changing when we go to the next page of the billing document(vf01).w

  • Can I move a graphic around the canvas?

    I have a clip I'm running in slow motion and want to put a circle around an object moving in the clip. Think of a UFO video where everything is darkend except a circle around the UFO, or perhaps a graphic of an arrow that points to the UFO. the circl

  • Suddenly receiving errors during Inventory on 2950's.

    Hello,      I am having an issue that started very recently.  We are seeing errors in the inventory starting this afternoon. Error received is from failed job is: RICS0001:Internal Error,unable to process the collected data from the device. The Inven