When does new user get new minutes from ATT

I bought the iPhone a few weeks ago... on Feb 8. It is March 1st today. Shouldn't I be getting a fresh set of 450 minuets? I checked my minutes (clicked the "show my minutes" button in Settings-->Phone--> ATT Services) and it shows 332... which is about right (I don't use it that much obviously.)
When do I get my new minutes? Not the first of the month?
Thanks,
Al1776

If you don't yet have an online account with AT&T you can set one up very easily on their website in a couple minutes. Just put in your mobile number and it will prompt you to complete some information and then your good to go. Since you signed up on the 8th your billing cycle will fall some where around that date each month. Your first month will be pro-rated for partial service you receive, as well as the activation fee, and the entire bill for the next full month.
I signed up on the 5th of a month and my cycle is on the 5th of each month. From AT&T you can also pay your bill online, the only thing you can't do is manage your account features for the iphone plan. You have to have AT&T do that for you, they tell me you can do from itunes but I have not looked very hard to see how to do it.

Similar Messages

I got my iphone4 yesterday and when I try to get any apps from apps store I keep getting error 1004 please try later please help th iPhone is brand new!

I got my iphone4 yesterday and when I try to get any apps from apps store I keep getting error 1004 please try later please help th iPhone is brand new!

mandyfromhull wrote:
I got my iphone4 yesterday and when I try to get any apps from apps store I keep getting error 1004 please try later please help th iPhone is brand new!
Try this link to fix your problem.
http://forums.macrumors.com/showthread.php?t=949246

When does an AP gets to Air-Monitor mode?

Q: When does an AP gets to Air-Monitor mode?
A: In a Mobility-controller AP deployment there are just 3 conditions that an AP can go into an Air-Monitor(AM) Mode:
1. If the am-mode is configured in the "rf dot11a-radio-profile" or "rf dot11g-radio-profile"
To see if it is configured in the radio profile please use this filter in the show running-config command
Example:
(Aruba) #show running-config | begin "rf dot11a-radio-profile"
Building Configuration...
rf dot11a-radio-profile "default"
mode am-mode ------------------------------------------------------------- Indicates that the Airmonitor is Enabled
2. If Mode Aware ARM is turned on in the ARM profile then th ap turns to AM mode when it sees excess power from the neighbor AP
To see if mode aware arm is enabled in the arm profile please use this filter in the show running-config command
(Aruba) #show running-config | begin "rf arm-profile"
Building Configuration...
rf arm-profile "default"
mode-aware ------------------------------------------------- Indicates that the mode aware arm is enabled
3. During the Regulatory mismatch or un-supported
a. When there is no channel available for the AP’s operation for the country defined on the controller.
Use the following command to verify the allowed channels for an AP
(Aruba-7240) #show ap allowed-channels ap-name <name-of-ap>
b. When AP’s has a different country with the controller’s Country.
Compare the country defined on the controller "(Aruba) #show country" to the country defined in the "(Aruba) #show ap regulatory-domain-profile <profile-name>". The ap regulatory-domain-profile will be mapped in the ap-group to which the ap is provisioned to.

Hi Marc,
I have a shop system comprised of two web applications where one is for
maintaining the shop and the other for using the shop. When I do changes
to the shop from the one webapp they do not show up in the second, unless
I call refresh. Also, I have to switch off the cache, it seems and do a
flush on the changed objects. There are some questions now:
a) when I call refresh, is the complete state reread regardless whether
there have been changes or not or does it know, when the state has not
changed in the DB ? it is a performance question, I guess.
b) can I use transactional reads to do the refresh automatically ?
c) I noticed that refresh does not do a deep refresh of all the objects
referenced by the one to be refreshed. Is there a way to do this or do I
have to go thru all the objects ?
I asked some questions some time ago in another thread, which might refer
to. I am sorry, if I am not clear enough.
Best regards
Wolfgang
Marc Prud'hommeaux wrote:
Wolfgang-
I take the question to mean that you are wondering how you can refresh
the state of a persistent instance to reflect changes in the data store.
If that is the case, then you can just call
PersistenceManager.refresh(ob) on the object, and the newer values will
be obtained.
If that doesn't help, can you clarify the question a little?
In article <cj7ris$mhr$[email protected]>, Wolfgang Kundrus wrote:
Do I have to use transactional reads for an object to get the changes done
by another web application ?
Thanks
Wolfgang
Marc Prud'hommeaux
SolarMetric Inc.

New OS from ATT a step back?

Can anybody tell me what the new OS from ATT was suppose to fix? So far 90% apps don't run which I guess might be normal with a new OS. But BB world is slow to load now on wifi and almost impossible when I'm on 3g. Did download rhw theme app which had an update last night so I would think for the new OS and it's stuck on a screen wanting th hook up to my bbm, So far battery life seems to be down more then normal but that will take a day or two to see

Well so far 90% of the apps don't work after update. Map has slowed to a crawl if it works at all. It did seem to fix the rebootss but I'd take that back to get the apps working. Phone is almost useless without apps.

"This content is already fufilled by another user"/Getting an ebook from Play Books to Aldiko?

I bought the book from the play store. I downloaded the .epub/acsm file from the website onto my phone's sd card.
I tried to open it and import to aldiko but i get error messages all the time.
I contacted someone from Google , and they directed me here.
Please help?

WHOOP WHOOP! Thanks for reminding me about Digital Editions for the ebook. I got it finally working on my phone - even though someone from Google said I couldn't do it..
Date: Fri, 18 May 2012 05:12:46 -0600
From: [email protected]
To: [email protected]
Subject: "This content is already fufilled by another user"/Getting an ebook from Play Books to Aldiko?
    Re: "This content is already fufilled by another user"/Getting an ebook from Play Books to Aldiko?
    created by Frustrated in AZ in Adobe Digital Editions - View the full discussion
If you downloaded the file without using Digital Editions to do it, there'snot much we can help you with because that's the product we deal with. =======================
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4418873#4418873
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4418873#4418873. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Adobe Digital Editions by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

When does the horizontalScrollBar get created on a List?

When does the horizontalScrollBar get created on a List?
The scroller is created, but the scrollbar isn't created yet and I get an error:
I have a spark List:
<s:List id="list" creationComplete="creationCompleteHandler(event)">
        <s:layout>
            <s:HorizontalLayout />
        </s:layout>
</s:List>
private function creationCompleteHandler(event:FlexEvent):void {
     (event.currentTarget as List).scroller.addEventListener( FlexEvent.UPDATE_COMPLETE, onScrollerComplete );
// these don't trigger anything!
//    (event.currentTarget as List).scroller.addEventListener(FlexEvent.CREATION_COMPLETE , onScrollerComplete );
//    (event.currentTarget as List).scroller.addEventListener(Event.ADDED_TO_STAGE , onScrollerComplete );
private function onScrollerComplete(event:Event):void {
     // horizontalScrollBar still null at this point - how can I use it?
     // I want to set the style, but it's not created yet!
     // event.currentTarget.scroller.horizontalScrollBar.setStyle("repeatInterval", 600);

I just realized that
this.setIconImage(new ImageIcon("image.jpg").getImage())
did not create the icon for my saved files.
So what did create it? I did not program it!
However, I happen to have an icon file Ananya.ico where I have my java project. I use if for my installation file. Did Java use this icon?
Please help! Thanks!

When does the JSP get regenerated!!

Hi,
Can anyone please tell me When does the JSP get regenerated!!
Thanks in advance
SP
[att1.html]

Answered on interest.jsp
(please don't cross post)
mbg
=============================================================
"SP" <[email protected]> wrote in message
news:[email protected]..
Hi,
Can anyone please tell me When does the JSP get regenerated!!
Thanks in advance
SP

HT201272 i just purchased a new ipad3 from att, by neighbor purchased hers from verizon. She has facetime and I do not. Why?

i just purchased the new ipad3 from att and it did not have facetime. my neighbor bought hers from verizon and got facetime. Is there a reason that she has it and I don't? They are the exact type of ipad3's.

Go to Settings -> General -> Restrictions. Is Facetime turned off there, perhaps?

When doing catalog backup get message " your system is low on disk space, and elements organizer can

When doing catalog backup get message " your system is low on disk space, and elements organizer cannot perform the operation. If create a catalog with 20 pictures backup works OK. backing up to a 1TB external drive. Have 16705 pictures in catalog. Total disk space for pictures is 192 MB. Why am I getting message?

kdrozzen a écrit:
Total disk space for pictures is 192 MB.
Do you really mean MB (megabytes) or GB (gigabytes) ?
Even if its GB, the free space may be enough, depending on your files size, especially with videos or raw files.
When you start the backup process, it first shows you the total size of the catalog.

Does anyone ever get customer service from this company?

Does anyone ever get customer service from this company? I have been trying to find out how to rotate the view of a page in digital editions by 90 degrees so I can read my digital download. I am going in circles

gaylyn -- What kind of problem are you having? If you tell us, we can help you figure out where to ask your question. Is it about a password problem? If it is, tell us which password, OK? To your Mac, or to a program? Or is it something else?

When doing goods receipt and the movement from QA to unrestricted use there

Dear all,
when doing goods receipt and the movement from QA to unrestricted use there is an yellow error message
Error in EXIT_ SAPMM07_004 : Object 10462311E06/52,Char."LOBM_UDCODE,Value 01 A0,error"VALUE_NOT_FOUND"
Inspection Lot : 10000283512
System Status : UD ICCO SPRQ

Hi,
Did you use the follow up action in the UD code selection? It looks from the error that program is unable to find the UD code.
Kindly check the configurations in QM and see that everything is working fine?
Alternatively, if you are using the follow up action, then remove that first. Do the GR using MIGO -- this will create the inspection lot. Confirm the inspection using QA11 by entering the UD code for acceptance. Thereafter the the stock will rest in QI status. Use MB1B and perform the transfer posting with movement 321 to bring the stock to unrestricted use.
Regards,
Sushant

BUG: Advanced Actions duplicated when creating NEW PROJECTS FROM TEMPLATE using Adobe Captivate 8.

Need: CREATE NEW PROJECTS FROM TEMPLATE using Adobe Captivate 8.
Problem: NEW PROJECT (.cptx) duplicates the Advanced Actions originally configured within TEMPLATE FILE (.cpt.).
For example: Template file (.cptl) advanced action "_initializeModule" gets duplicated as "_initializeModule1", "_initializeModule2", "_initializeModule3" within NEW PROJECT. FYI, the original "_initializeModule" advanced action still appears.
MAJOR BUG, what the heck is going on?!?!!! Planning to deploy this template file to use for multiple courses with multiple users, this WILL cause epic confusion across the board.

Similar problem, think they are working on it as well: when dragging a shared action from an external library to a slide or object event, and that action is using a parameter that was already created for another shared action, there will be a new parameter created which really screws up the shared action contrary to this problem. Tip: for the moment do not drag shared actions from an external library immediately to an event, but drag them first to the Library: Reuse Shared Actions in other Projects - Captivate 7 vs. 8 - Captivate blog

Keep receiving 3333 when acquiring new license from license server

Hi all
I find error 3333 will always be dispatched by DRMManager if I acquire a new license from the license server. I'd appreciate if anyone could help explain and show me how to fix or get around the issue. Here is the detail:
User rents a title.
When he plays it for the first time, the license server issues a voucher will 24-hours playback window set.
Client starts the playback, the playback window starts count-down.
After 24 hours, the voucher gets expired.
User rents the same title again and he goes to play it again on the same computer.
Client tries to load the local voucher and finds it is expired.
Client tries to re-load the voucher from the license server again.
The license server issues a new voucher for the same title with the same parameters set (see below).
DRMManager dispatches 3333.
3333 will be dispatched again if goes to #7 again.
If I remove all local vouchers by using DRMManager.removeDRMVouchers(), the playback would start after re-acqiure the voucher from license server.
The document metions to "re-acquire the voucher from server if 3333 is received". But it seems not working in my case.
BTW, here is how we set the parameters when license server issues a voucher for a new rental title (never played before):
license caching during: 24hour
playback window: 48hour
Thanks.

Hi Hirosh
Thanks for your help. It's good to know there is a way to hanle this case (even in the license server side).
The document metions "re-acquire the voucher from server if 3333 is received" is the Flash Runtime Error document. But after double check, I find the suggestion is for error 3332. It's my mistake and I'm sorry.
Do you know where I can get the support for implementing "issuing new voucher for re-renting same video"? If it's not in the reference implementation where I can find it.
Thanks.

How To Add Additional Fields When Creating New Contact From w/in Mac Mail?

Hi there. When in Mac Mail and clicking on contact information provided within an email, we are able to either (1) CREATE NEW CONTACT or (2) ADD TO EXISTING CONTACT (by clicking on the arrow next to a phone number, address, etc.). If I choose "Create New Contact," how can I add additional fields BEFORE clicking on "Add to Address Book" button in lower right corner? Let's say, for example, I know this new contacts URL or company. (Currently, I am creating the new contact from within Mac Mail and then going to Address Book and finding the contact, then editing, the adding the additional fields, then saving, and then going back to Mac Mail. This all takes time.)
Note: When creating a new iCal event from within Mac Mail, we can click on Option/Alt key when selecting drop-down arrow...and this will allow us to add additional information. The same feature isn't available for address book???

I have the exact same question and problem. If there was a way to automatically open the AB entry after "creating new contact" this would solve it.
Thanks for any suggestion

Missing contact when "create new contact" from email or number

I am having a really strange problem on my iPhone and think it will be a fun mystery to solve. Please help me!
It is currently set up with google so that my mail/notes are using gmail IMAP and my contacts/calendars are using Google Sync. So far it's been working pretty well except for all the known many bugs and issues (please fix these, google!). I have no other email, calendar, or contact accounts set up (not even syncing with my computer).
I received an email from a friend who I did not yet have a contact for, so in the email header I clicked her name and chose to "Create new contact." As usual, the email address was already in the "email" field, so I just edited her name and filled out the "company" field and pressed Done. The "from" field in the email updated to show that the contact had been added to my phone and that it recognized the email as being from her.
Now, I go to add a number to her contact and when I navigate through my contacts list, her name is no where to be seen. I've tried searching through the contacts by using the search bar at the top of both the Phone and the Contacts apps, but nothing shows up. However, when I compose an email and start typing her address, it recognizes her as a contact. Even weirder, I just tried the entire phone search spotlight feature, and it found her contact right away, as if it were any normal contact. When I click on it, it brings me to her contact page, which I cannot edit, and when I press the little left arrow "Contacts" in the top left of the screen to go back to the whole listing, she's not there!
When I go to add contacts using the little + symbol in the top right of the phone app, it works normally and the contact appears as usual. But every time I try to do a new contact from email, this happens! Choosing to "update existing contact" works fine, though. So I've been forced to create an empty contact with her name in the Phone app, and then add the email to it.
Please help my find where in my phone this contact is residing, and how to bring it out so I can find it. I have tried force-quitting the relevant apps from the multi-task dock, and even turning off and on my phone, but to no luck.
Update: Just tried creating a new contact from a phone number I've previously dialed and the same thing happens! Where are my contacts going?? This is so weird!
Not sure if this is just a google sync issue, but I figured I'd post it in case other people are having similar issues
Device: Apple iPhone 4
Carrier: AT&T
Country / Language: USA English
OS: iOS 4

I recently experienced a similar event. I was adding from Contacts "+" button on the iPhone 4. I completed entering the data & hit "done". I went back to add a photo. I hit "done" & went to test the result. No new contact. Search did not find it. Tried two more times with different contacts. Same result.
At one point, the "All Contacts" directory went blank. Nothing. Seconds later the contacts returned. Scary. I rebooted the iPhone. No new contacts but old ones fine.
I then entered with an old iPhone on OS 3.2 same data. Showed quickly via MobileMe. On the new iPhone added photo the photo. All OK. From an iPad, OS3 I did the same. Added photo in new phone. All OK. I added from the new iPhone including photo. All OK.
The iPhone IOS4 reboot may be the answer. Wish I had tried older systems before reboot.

When does new user get new minutes from ATT

Similar Messages

Maybe you are looking for