When does the eris update?!?!?1
now i have had my 1st generation eris for about 3 years and its only bin updated twice on its android system and im the one that usually gives the advice on the eris but i cant figure tis one ut the last time it updated itself was nevomber 2010 and it only updated to 2.1 and in order to install adobe falshplayer u have to have 2.2 so does any1 know????
The DROID Eris will never get an official Android 2.2 build. Also the ARMv6 processor is not supported by Adobe, so full Flash won't be available either. The closest thing on the phone is the Flash Lite already installed on the phone.
There was a radio update for the DROID Eris in March 2011. You can check for that update now by going to Settings > about phone > check for updates.
Similar Messages
-
When does the new update come out?
When does the new update for the OS come out on itunes?
When does the new update for the OS come out on itunes?
June 17, 2009.
(44364) -
Anyone who can advice ?
Hello Karsten,
Your Apple Tv is in Recovery Mode now and you will need a Micro Usb to Usb Cable to connect your Apple Tv with your Computer and then Restore it using iTunes. If you have an Android smart phone then you can use the cable which you use to charge your phone or connect it to computer or you will have to purchase a Micro Usb to Usb cable and then connect your Apple Tv with your Computer. Make sure you have updated version of iTunes (11.1.5) installed on your computer and then using iTunes Restore your Apple Tv to Factory settings and after it is Restored connect your Apple Tv to your Television and Configure it to use. Also go through the below link for more details.
http://support.apple.com/kb/ht4367 -
When does the new update for maps come to Australia?
I think it's the turn by turn instructions..
Yes October is nearly up and still says October on the website
I guess they didnt say which October............... -
i was doing the software update to my iphone 4s and my phone died. i pluged it in and when it turned on after the white apple the screen showes the blue itunes logo over the word itunes over an image of a charger. i tried reseting my phone. i cant figure out how to get past this point
See Here > http://support.apple.com/kb/HT1808
-
I was doing the latest update to my iphone4. when it got to exporting files it gave me error 3194, can anyone help?
Error -1 is not mentioned in this article about error messages during a restore process: http://support.apple.com/kb/TS3694
This one comes close:
The device could not be restored. An internal error occurred, or Error 3200: This indicates a network-connectivity or traffic issue. If you see this error, wait an hour or more and try again.
You may also check your security software settings, to make sure that iTunes can contact Apple servers during this process: iTunes for Windows: Troubleshooting security software issues -
my iphone 4 has this same issue, did these steps but when it was doing the software update, half way through my phone still wouldn't move pass the apple logo. help!
Please see the two articles below:
http://support.apple.com/kb/TS3694
http://support.apple.com/kb/TS3125 -
ABAP Dump is encountered when doing the negative subsequent adjustment
Hi Experts !!!
An ABAP Dump is encountered when doing the negative subsequent adjustment (posting a 102 movt type) on a Purchase Order via the Z function module. The dump only happens if the scenario satisfies the following conditions:
1.Material is either (but may not be limited to) 3000000234, 4000000121, 3000000210 (These are the only reported materials)
2.Order unit in Purchase Order is in MT
3.At 2nd weigh, Net Weight is less than PO Order Qty.
Note: No error occurs if same process is done via MIGO.
Initial Analysis:
An exception/error occurs when calling function u201CMB_CREATE_MATERIAL_DOCUMENT_UTu201D .
Please see below error anlysis report from after executin Zfunction module code.
Error analysis
Short text of error message:
Material 3000000234 / US01 Column 0001: MSEG-BPMNG not in quantity table
/not consistent
Long text of error message:
Diagnosis
Before the system posts a material document for an HPM/TDP material
(MARA-CMETH = 1 or 2), it performs the following consistency
checks:
o For each unit of measure in the Unit of Measure Group
(MARC-UOMGR), a line item has to be present in the additional
quantity appendix table (Table MSEGO2)
o For each unit of measure in the main core table MSEG that is
not initial a line item, has to be present in the additional
quantity appendix table (Table MSEGO2) and the corresponding
packed format quantities have to be identical.
This way, inconsistent stock level updates can be prevented.
System Response
The system stops processing.
Procedure
If the error is reproducible, contact your system administrator.
Procedure for System Administration
The inconsitency can have several reasons, for example:
o Incorrect postings from external systems using function module
MB_CREATE_GOODS_MOVEMENT
o Handling errors
o Application programming errors
Technical information about the message:
Message class....... "O3"
Number.............. 359
Variable 1.......... 3000000234
Variable 2.......... "US01"
Variable 3.......... 0001
Variable 4.......... "BPMNG"
Please let me know,if you want some other details.Problem Issolved
-
I have the latest operating system, but can't get my printers added. Why does the software update say that drivers for my printers are not available? I have the drivers installed from the CD but can't add the printer because it wants to go through software update.
It's pretty difficult to offer suggestions when you say nothing about your Mac, the version of Mac OS it's running, or the models of printers you have. This forum, however, is intended for questions about old, pre-G3 hardware, so unless you are asking about an very old Mac, this is not the forum where you'll be most likely to get help with your problem. I'd suggest you ask this question in the forum for your model of Mac or version of Mac OS X it's running. You'll be more likely to get assistance there, assuming you provide sufficient detail for anyone to make a diagnosis of the problem.
Regards. -
Hi, I am having a little trouble with exporting images to another drive and Catalogue and need some help if anyone can give me some advice
I am currently using Lightroom 5.6 and operating on a Mac with OSX Ver 10.9.5.
I am receiving an error problem when doing the following -
I am exporting selected photos from a particular Catalogue saved on Drive 1 to a folder created on another Drive where a Lightroom Catalogue has been created. In this Catalogue I have arranged for the images once exported to be moved to a different folder - I used the Auto Import process under the File dialogue box.
When processing the Export I receive an error message for each of the images being exported indicating the following -
Heading Import Results
Some import operations were not performed
Could not move a file to requested location. (1)
then a description of the image with file name
Box Save As Box OK
If I click the OK button to each image I can then go to the other Catalogue and all images are then transferred to the file as required.
To click the OK button each time is time consuming, possibly I have missed an action or maybe you can advise an alternative method to save the time in actioning this process.
Thanks if you can can help out.Thank You, but this is a gong show. Why is something that is so important to us all so very, very difficult to do?
-
Will doing the software update to 6.1.2 destroy any info saved on my iPhone 4? If so how do I back up what is on there - especially the contact list?
see the link above
and this discussed in above
http://support.apple.com/kb/ht1766 -
When downloading the new update to my windows 7 I get the error message MSVCR80.dll not available. I can't access my itunes at all. Please help
Follow the instructions of tt2 in https://discussions.apple.com/thread/5822086 and note to run the installer as admin
-
WHEN DOES THE IPHONE 5 COMING OUT IN SOUTH KOREA?
WHEN DOES THE IPHONE 5 COMING OUT IN SOUTH KOREA?
When it is announced by Apple. No one here would know. Go to Apple.com and watch the press releases to see when it will happen.
-
Does the Pages update include linking text boxes?
Does the Pages update include linking text boxes? This was a great feature in the previous iWork: Pages version.
Tamoshanter wrote:
I agree. The latest version of Pages is marketed as a huge leap forward, and indeed it probably is...
How so? It has a new coat of paint, Apple sells it as "New" and everyone thinks it is an "improvement"?
How on earth can you not notice or ignore what is so obviously wrong with it?
Peter -
How and When Does the attribute VI_ATTR_VXI_TRIG_STATUS get initialized
How and When Does the attribute VI_ATTR_VXI_TRIG_STATUS get initialized. Do the actual trigger lines get measured or does the attribute get initialized to a default value when the vxi resource manager is executed?
Hey whl6868,
According to page 157 (or 3-135) of the manual (http://www.ni.com/pdf/manuals/370132c.pdf), there is no default value for VI_ATTR_VXI_TRIG_STATUS. If Resman is returning valid values for it, then it must be actually reading the lines. Else, I would only expect it to return valid values when you actually call the function yourself.
Regards,
David R
Applications Engineer
National Instruments
Maybe you are looking for
-
How to get Topaz filters working in PSE11 purchased from App store
I've successfully used a range of Topaz filters in PSE9 and PSE10 (purchased from Apple's App store). Having recently purchased PSE11 from the App store, I'm having no luck getting any of the Topaz filters to work. I have followed the instructions on
-
Communicate between two (same) Applications
Hi there, I've written a server application in java. This Server is always running in the background. For restart/shutdown or similar purpose I want to communicate with this application. Is ist possible to start the same application with a args-flag
-
My iphone is stuck in recovery mode. The apple logo is up and proceeded about 70percent of the way then it just stops moving. I have looked all over the internet and I am out of warranty. On itunes it reads restoring iphone software. My software was
-
How to add an extra dynamic columns in workflow inbox?
Hi Every Expert, Transaction SWL1 only provides Six columns as dynamic columns for workflow inbox. But we need to use 7 to 8 dynamic columns. How to add these two extra columns into workflow inbox? Thanks, Shirley
-
Outlook 2013 cannot preview Office dcouments
Win8.1/64 bit/Office 365/Outlook 2013 It was all working fine then one day it stopped opening Office docs altogether. Another forum had a work around to fix that, but I have not found a fix for the previewer. I get the message "This file cannot be