When does the RAW conversion take place in Aperture?
Hi, could anyone tell me when Aperture makes the RAW conversion of files?
is it upon import to Aperture or upon export to an external editor for retouching? i'm just wondering when to import my files into Aperture from Bridge.before i start using Aperture full time.is it ok to do it now or will i get better results when 1.1 arrives?
thanks, Aidan
You can do it now and then pick the new RAW engine after upgrading to 1.1. If your RAW images are the originals from Bridge, you will have nothing to loose by converting all of them using the new 1.1 engine. Of course, I would play with a test project to better understand the new engine's capabilities, presets, and features.
Sam
Similar Messages
-
I have Mozilla Firefox 10.0. When I open it, it correctly opens on the homepage in the first tab. Once I have another, or several, tabs open, no matter which tab is active, any google search I do immediately takes place in tab No 2. It doesn't seem to matter how many times I go to e.g. tab 4 to do a search (because I wish to compare with the webpage open in tab 2), yet it always now does the search in tab 2. This is very irritating. There must be some setting that has gone pear-shaped, but where/which? Any suggestions? Thanks.
Try the Firefox SafeMode to see how it works there. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
''(If you're not using it, switch to the Default Theme.)''
* You can open the Firefox 4.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''Don't select anything right now, just use "Continue in SafeMode."''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
'''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
''When you figure out what is causing that, please let us know. It might help other user's who have that problem.'' -
Would like to purchase PSE 12 to process Camera Raw files for the following cameras: Nikon D800, Nikon DF, Canon G9 and Pentax K-3 does the Raw Converter that comes with PSE 12 when purchased recognize the cameras listed in the question or do I need to download the camera Raw Version 8.3 ?
While the G9 RAW files can be read by Adobe Camera RAW and Lightroom, these file are unsupported at this time. Here is a link to Adobe's latest list of cameras that are supported and this list came out yesterday http://www.adobe.com/products/photoshop/cameraraw.html
I have not done a comparison between Lightroom and Canon's software but others have and say that Canon's software is clearly better. I am sure when Adobe updates their software again to include the G9 it will be a very good RAW converter as it is will most other cameras. -
how long does the recycle program take or do they give you an ipod straight away when you are at the store.when you buy from the store do they do free ipod engraving
How recently did you switch? If it's less than 60 days, then Verizon simply reinstates your previous account. The fact that you were on the EDGE plan and mailed the devices back, and they apparently are somewhere in the system, could cause complications, and it might just work out that you just go back on the same plan and they set you up with the same devices. I'm not sure how it will go - but since you are still being billed for the devices...
-
How long does the configure setup take when u first turn on the IPAD? Mine seems to be stuck in the language choice. Help!
It should not be stuck at the language choice. Is there a "Next" button in the upper right corner? Or a blue arrow pointing to the right?
-
"Unable to save the raw conversion settings. There was a write permission error."
I just built a new workstation for processing photos using PS CS5. I use external drives to store my images as I find it easier for backing up as well as for when I want use my laptop for sorting, etc.. I copied over all my old "Collection" files, and of course, had to "fix" them once on the new machine. Once pointed in the right direction, the collections all fill out correctly.
When I go to process a collection though, I encounter an odd problem I can't seem to sort out. I can delete files, rename files, copy/paste to the external drives, etc.. What I can't seem to do is add Labels, Ratings, or modify RAW settings. I mean, I can use ACR to make adjustments, I just can't seem to save them.
The system just ignores label, rating commands completely. When I try to save an ACR adjustment I get this error. "Unable to save the raw conversion settings. There was a write permission error."
The files are NOT write protected. I'm set up as the owner of my workstation, with complete control of the system. I can't seem to find any useful information about this error because the "write permission error" seems to only be happening on installs, so that's all I can find help for.
My system:
Intel Core i7 970@ 3.20GHZ
24.0 GB RAM
64-bit OS - Windows 7 Pro
DX58S02 Motherboard
NVIDIA GeForce GTX 580Thanks for replying. I've been going crazy trying to fix this.
To answer your first question; I use sidecar XMP files. If everything from my archive was shot in RAW I'd try converting to DNG and see if embedding the changes directly in a file worked. Unfortunately, a lot of my old stuff was shot in JPG, so sidecars seems to be the best choice.
When I add labels, ratings, as well as change RAW settings on files I place on my workstations HD everything works. It's only when I try to do these things with the same files on removable drives that I run into trouble. The drives I use are Transcend 640GB StoreJet 25ms connected via USB.
I don't think it's a UAC problem. At least, to my understanding, doesn't that control how your machine alerts you to program changes? I looked into how to change ownership, and did so, but that didn't work. Here's a link to what I mean: http://www.addictivetips.com/windows-tips/windows-7-access-denied-permission-ownership/
I'm stumped. I also hate the idea that I'll have to go through various folders to find images from already created collections, copy them to a new folder on my HD and then work on them. Then I'll have to put them all back... ugghhhh -
How the account determination takes place for cost center
Hai
Can any one explain me in detail (as i am new to this topic) how the account determination takes place when i raise a P.O for cost centre and do G.R for the same? If possible pl send me links also related the above.
ThanksHi,
Once u have given account assignment category 'K', then system will pick automatically G/L account from the OBYC settings for the combination of Valuation modification code, account modifier (VBR) & Valuation class.
From the OME9 transcation, system will pick transcation key for the respective account assignment category.
For the account assignment category 'K', account modifier is 'VBR'.
Here masterial master record (MMR) is optional. If you are giving MMR in the PO, system will pick valuation class from the MMR.
If MMR is not giving, then system will pick valuation class from the transcation OMQW. Here you need to maintain valuation class aganist material group, which is u r giving in the PO. ( This is optional)
In the OBYC transcation, for the transcation key GBB you need to maintain G/L account for the combination Valuation modification code, account modifier (VBR) & Valuation class.
Also maintain one more entry in the transcation key GBB, maintain G/L account for the combination Valuation modification code, account modifier (VBR) & Valuation class field is blank.
Once you have given account assignment category 'K' in the PO, system will pick G/L for the combination Valuation modification code, account modifier (VBR) & Valuation class. This is happening before giving the cost centre.
If you are not maintaining MMR in the PO and not maintaining valuation class aganist material group in the transcation OMQW, the system will pick G/L account for the combination of Valuation modification code, account modifier (VBR) & Valuation class field is blank.
So in your case, check valuation class aganist material group in the transcation OMQW and maintain G/L in the OBYC for the respective combination. If valuation class is not maintained aganist material group in the transcation OMQW and maintain one more entry in the OBYC with the blank valuation calss field.
Regards
KRK -
SD Text Determination - When does the system determine a text?
Dear Expert,
1. I would like to know when the system determines a header text in billing, for example,
- when a billing is created
- when a billing is changed
etc.
2. If a billing is already created, is it possible to have the system re-determined a text?
Thank you for your help.Hi
The text determination takes place essentially at the time of creation of billing doc. At the time of change in the billing doc one can manually go in the document and make the changes in the header text. I dont think there is an option like the one in pricing where in one can redetermine the prices.
Regards
Manas -
HT5262 how long does the back up take?
How long does the back up take?
Welcome to the Apple Support Communities
It depends of the space your iPhone, iPod touch or iPad has to back up on iCloud. You can see what's backed up in Settings > iCloud > Storage and Backup > Manage Storage, and select the backup, so you will be able to choose what you want to back up. The device will back up automatically when it's connected to the power adapter -
Hi, I am having a little trouble with exporting images to another drive and Catalogue and need some help if anyone can give me some advice
I am currently using Lightroom 5.6 and operating on a Mac with OSX Ver 10.9.5.
I am receiving an error problem when doing the following -
I am exporting selected photos from a particular Catalogue saved on Drive 1 to a folder created on another Drive where a Lightroom Catalogue has been created. In this Catalogue I have arranged for the images once exported to be moved to a different folder - I used the Auto Import process under the File dialogue box.
When processing the Export I receive an error message for each of the images being exported indicating the following -
Heading Import Results
Some import operations were not performed
Could not move a file to requested location. (1)
then a description of the image with file name
Box Save As Box OK
If I click the OK button to each image I can then go to the other Catalogue and all images are then transferred to the file as required.
To click the OK button each time is time consuming, possibly I have missed an action or maybe you can advise an alternative method to save the time in actioning this process.
Thanks if you can can help out.Thank You, but this is a gong show. Why is something that is so important to us all so very, very difficult to do?
-
Which SIM card does the iPad mini take? Does it have to be specific type of SIM for the iPad mini?
Welcome to the Support Communities. The answer to your question is available in Apple's website — see the Input/Output section here:
http://www.apple.com/ipad-mini/specs/ -
ABAP Dump is encountered when doing the negative subsequent adjustment
Hi Experts !!!
An ABAP Dump is encountered when doing the negative subsequent adjustment (posting a 102 movt type) on a Purchase Order via the Z function module. The dump only happens if the scenario satisfies the following conditions:
1.Material is either (but may not be limited to) 3000000234, 4000000121, 3000000210 (These are the only reported materials)
2.Order unit in Purchase Order is in MT
3.At 2nd weigh, Net Weight is less than PO Order Qty.
Note: No error occurs if same process is done via MIGO.
Initial Analysis:
An exception/error occurs when calling function u201CMB_CREATE_MATERIAL_DOCUMENT_UTu201D .
Please see below error anlysis report from after executin Zfunction module code.
Error analysis
Short text of error message:
Material 3000000234 / US01 Column 0001: MSEG-BPMNG not in quantity table
/not consistent
Long text of error message:
Diagnosis
Before the system posts a material document for an HPM/TDP material
(MARA-CMETH = 1 or 2), it performs the following consistency
checks:
o For each unit of measure in the Unit of Measure Group
(MARC-UOMGR), a line item has to be present in the additional
quantity appendix table (Table MSEGO2)
o For each unit of measure in the main core table MSEG that is
not initial a line item, has to be present in the additional
quantity appendix table (Table MSEGO2) and the corresponding
packed format quantities have to be identical.
This way, inconsistent stock level updates can be prevented.
System Response
The system stops processing.
Procedure
If the error is reproducible, contact your system administrator.
Procedure for System Administration
The inconsitency can have several reasons, for example:
o Incorrect postings from external systems using function module
MB_CREATE_GOODS_MOVEMENT
o Handling errors
o Application programming errors
Technical information about the message:
Message class....... "O3"
Number.............. 359
Variable 1.......... 3000000234
Variable 2.......... "US01"
Variable 3.......... 0001
Variable 4.......... "BPMNG"
Please let me know,if you want some other details.Problem Issolved
-
WHEN DOES THE IPHONE 5 COMING OUT IN SOUTH KOREA?
WHEN DOES THE IPHONE 5 COMING OUT IN SOUTH KOREA?
When it is announced by Apple. No one here would know. Go to Apple.com and watch the press releases to see when it will happen.
-
How and When Does the attribute VI_ATTR_VXI_TRIG_STATUS get initialized
How and When Does the attribute VI_ATTR_VXI_TRIG_STATUS get initialized. Do the actual trigger lines get measured or does the attribute get initialized to a default value when the vxi resource manager is executed?
Hey whl6868,
According to page 157 (or 3-135) of the manual (http://www.ni.com/pdf/manuals/370132c.pdf), there is no default value for VI_ATTR_VXI_TRIG_STATUS. If Resman is returning valid values for it, then it must be actually reading the lines. Else, I would only expect it to return valid values when you actually call the function yourself.
Regards,
David R
Applications Engineer
National Instruments -
Move order number when doing the pick release
hi everyone ,
is there any way to specify the move order number when doing the pick release process
i wante to passe the move order number to the pick release API procedure
or is it possible to change it after doing the pick release
best regardsUses MTL_TXN_REQUEST_HEADERS_S sequence to generate the move order number in, I believe, when-validate-item tirgger.
Thanks
Nagamohan
Maybe you are looking for
-
Menu Bar In Muse CC 2014 vs. Menu Bar in Muse V7.4
Ok! I admit to old age and failing eye sight but I something I do not understand is why are their two versions of Muse and which one should I be using? Muse 2014 appears to have more features but the menu bar and subsequent drop down menu's are extre
-
HT1386 Where do you drag and drop playlists onto iphone in new itunes
Where do you drag and drop playlists onto iphone in new itunes
-
Iphone 3G[S] 3.1.3 messageing fail
Hi everyone, I recently updated my iphone 3G[S] to 3.1.3 and since then i have not been able to send pictures through text message, i was wondering if anyone els is having this problem if so how can i fix it because Apple wont let me go back to 3.1.2
-
Hello i just recently (in dec 2010) got my first Macbook Pro, i love it and its a amazing computer and saying this i treat it VERY well, about 2 weeks ago i noticed odd shadow kind of marks in the center of my screen. can really only be seen when wat
-
Does iPhone 6 only come in white on screen side?